Merge branch 'master' into feature/qspi-stream

This commit is contained in:
Ryan Summers 2020-12-02 17:08:33 +01:00
commit d3bb5ab0e4
9 changed files with 408 additions and 696 deletions

View File

@ -1,6 +1,16 @@
[target.'cfg(all(target_arch = "arm", target_os = "none"))'] [target.'cfg(all(target_arch = "arm", target_os = "none"))']
runner = "gdb-multiarch -q -x openocd.gdb" runner = "gdb-multiarch -q -x openocd.gdb"
rustflags = ["-C", "link-arg=-Tlink.x"] rustflags = [
"-C", "link-arg=-Tlink.x",
# The target (below) defaults to cortex-m4
# There currently are two different options to go beyond that:
# 1. cortex-m7 has the right flags and instructions (FPU) but no instruction schedule yet
"-C", "target-cpu=cortex-m7",
# 2. cortex-m4 with the additional fpv5 instructions and a potentially
# better-than-nothing instruction schedule
"-C", "target-feature=+fp-armv8d16",
# When combined they are equivalent to (1) alone
]
[build] [build]
target = "thumbv7em-none-eabihf" target = "thumbv7em-none-eabihf"

View File

@ -62,7 +62,7 @@ branch = "dma"
[features] [features]
semihosting = ["panic-semihosting", "cortex-m-log/semihosting"] semihosting = ["panic-semihosting", "cortex-m-log/semihosting"]
bkpt = [ ] bkpt = [ ]
nightly = ["cortex-m/inline-asm"] nightly = ["cortex-m/inline-asm", "dsp/nightly"]
[profile.dev] [profile.dev]
codegen-units = 1 codegen-units = 1

View File

@ -6,3 +6,6 @@ edition = "2018"
[dependencies] [dependencies]
serde = { version = "1.0", features = ["derive"], default-features = false } serde = { version = "1.0", features = ["derive"], default-features = false }
[features]
nightly = []

View File

@ -1,4 +1,4 @@
use core::ops::{Add, Mul}; use core::ops::{Add, Mul, Neg};
use serde::{Deserialize, Serialize}; use serde::{Deserialize, Serialize};
use core::f32; use core::f32;
@ -8,23 +8,35 @@ use core::f32;
// `compiler-intrinsics`/llvm should have better (robust, universal, and // `compiler-intrinsics`/llvm should have better (robust, universal, and
// faster) implementations. // faster) implementations.
fn abs(x: f32) -> f32 { fn abs<T>(x: T) -> T
if x >= 0. { where
T: PartialOrd + Default + Neg<Output = T>,
{
if x >= T::default() {
x x
} else { } else {
-x -x
} }
} }
fn copysign(x: f32, y: f32) -> f32 { fn copysign<T>(x: T, y: T) -> T
if (x >= 0. && y >= 0.) || (x <= 0. && y <= 0.) { where
T: PartialOrd + Default + Neg<Output = T>,
{
if (x >= T::default() && y >= T::default())
|| (x <= T::default() && y <= T::default())
{
x x
} else { } else {
-x -x
} }
} }
fn max(x: f32, y: f32) -> f32 { #[cfg(not(feature = "nightly"))]
fn max<T>(x: T, y: T) -> T
where
T: PartialOrd,
{
if x > y { if x > y {
x x
} else { } else {
@ -32,7 +44,11 @@ fn max(x: f32, y: f32) -> f32 {
} }
} }
fn min(x: f32, y: f32) -> f32 { #[cfg(not(feature = "nightly"))]
fn min<T>(x: T, y: T) -> T
where
T: PartialOrd,
{
if x < y { if x < y {
x x
} else { } else {
@ -40,6 +56,16 @@ fn min(x: f32, y: f32) -> f32 {
} }
} }
#[cfg(feature = "nightly")]
fn max(x: f32, y: f32) -> f32 {
core::intrinsics::maxnumf32(x, y)
}
#[cfg(feature = "nightly")]
fn min(x: f32, y: f32) -> f32 {
core::intrinsics::minnumf32(x, y)
}
// Multiply-accumulate vectors `x` and `a`. // Multiply-accumulate vectors `x` and `a`.
// //
// A.k.a. dot product. // A.k.a. dot product.
@ -50,7 +76,7 @@ where
{ {
x.iter() x.iter()
.zip(a) .zip(a)
.map(|(&x, &a)| x * a) .map(|(x, a)| *x * *a)
.fold(y0, |y, xa| y + xa) .fold(y0, |y, xa| y + xa)
} }
@ -58,10 +84,10 @@ where
/// ///
/// To represent the IIR state (input and output memory) during the filter update /// To represent the IIR state (input and output memory) during the filter update
/// this contains the three inputs (x0, x1, x2) and the two outputs (y1, y2) /// this contains the three inputs (x0, x1, x2) and the two outputs (y1, y2)
/// concatenated. /// concatenated. Lower indices correspond to more recent samples.
/// To represent the IIR coefficients, this contains the feed-forward /// To represent the IIR coefficients, this contains the feed-forward
/// coefficients (b0, b1, b2) followd by the feed-back coefficients (a1, a2), /// coefficients (b0, b1, b2) followd by the negated feed-back coefficients
/// all normalized such that a0 = 1. /// (-a1, -a2), all five normalized such that a0 = 1.
pub type IIRState = [f32; 5]; pub type IIRState = [f32; 5];
/// IIR configuration. /// IIR configuration.
@ -159,10 +185,13 @@ impl IIR {
/// * `xy` - Current filter state. /// * `xy` - Current filter state.
/// * `x0` - New input. /// * `x0` - New input.
pub fn update(&self, xy: &mut IIRState, x0: f32) -> f32 { pub fn update(&self, xy: &mut IIRState, x0: f32) -> f32 {
let n = self.ba.len();
debug_assert!(xy.len() == n);
// `xy` contains x0 x1 y0 y1 y2 // `xy` contains x0 x1 y0 y1 y2
// Increment time x1 x2 y1 y2 y3 // Increment time x1 x2 y1 y2 y3
// Rotate y3 x1 x2 y1 y2 // Shift x1 x1 x2 y1 y2
xy.rotate_right(1); // This unrolls better than xy.rotate_right(1)
xy.copy_within(0..n - 1, 1);
// Store x0 x0 x1 x2 y1 y2 // Store x0 x0 x1 x2 y1 y2
xy[0] = x0; xy[0] = x0;
// Compute y0 by multiply-accumulate // Compute y0 by multiply-accumulate
@ -170,7 +199,7 @@ impl IIR {
// Limit y0 // Limit y0
let y0 = max(self.y_min, min(self.y_max, y0)); let y0 = max(self.y_min, min(self.y_max, y0));
// Store y0 x0 x1 y0 y1 y2 // Store y0 x0 x1 y0 y1 y2
xy[xy.len() / 2] = y0; xy[n / 2] = y0;
y0 y0
} }
} }

View File

@ -1,3 +1,4 @@
#![no_std] #![no_std]
#![cfg_attr(feature = "nightly", feature(asm, core_intrinsics))]
pub mod iir; pub mod iir;

View File

@ -27,358 +27,184 @@ static mut SPI_START: [u16; 1] = [0x00];
// The following global buffers are used for the ADC sample DMA transfers. Two buffers are used for // The following global buffers are used for the ADC sample DMA transfers. Two buffers are used for
// each transfer in a ping-pong buffer configuration (one is being acquired while the other is being // each transfer in a ping-pong buffer configuration (one is being acquired while the other is being
// processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on // processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on
// startup are undefined. // startup are undefined. The dimensions are `ADC_BUF[adc_index][ping_pong_index][sample_index]`.
#[link_section = ".axisram.buffers"] #[link_section = ".axisram.buffers"]
static mut ADC0_BUF0: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; static mut ADC_BUF: [[[u16; SAMPLE_BUFFER_SIZE]; 2]; 2] =
[[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];
#[link_section = ".axisram.buffers"] macro_rules! adc_input {
static mut ADC0_BUF1: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; ($name:ident, $index:literal, $trigger_stream:ident, $data_stream:ident,
$spi:ident, $trigger_channel:ident, $dma_req:ident) => {
#[link_section = ".axisram.buffers"] /// $spi is used as a type for indicating a DMA transfer into the SPI TX FIFO
static mut ADC1_BUF0: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; /// whenever the tim2 update dma request occurs.
struct $spi {
#[link_section = ".axisram.buffers"] _channel: sampling_timer::tim2::$trigger_channel,
static mut ADC1_BUF1: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE];
/// SPI2 is used as a ZST (zero-sized type) for indicating a DMA transfer into the SPI2 TX FIFO
/// whenever the tim2 update dma request occurs.
struct SPI2 {
_channel: sampling_timer::tim2::Channel1,
}
impl SPI2 {
pub fn new(_channel: sampling_timer::tim2::Channel1) -> Self {
Self { _channel }
}
}
// Note(unsafe): This structure is only safe to instantiate once. The DMA request is hard-coded and
// may only be used if ownership of the timer2 channel 1 compare channel is assured, which is
// ensured by maintaining ownership of the channel.
unsafe impl TargetAddress<MemoryToPeripheral> for SPI2 {
/// SPI2 is configured to operate using 16-bit transfer words.
type MemSize = u16;
/// SPI2 DMA requests are generated whenever TIM2 CH1 comparison occurs.
const REQUEST_LINE: Option<u8> = Some(DMAReq::TIM2_CH1 as u8);
/// Whenever the DMA request occurs, it should write into SPI2's TX FIFO to start a DMA
/// transfer.
fn address(&self) -> u32 {
// Note(unsafe): It is assumed that SPI2 is owned by another DMA transfer and this DMA is
// only used for the transmit-half of DMA.
let regs = unsafe { &*hal::stm32::SPI2::ptr() };
&regs.txdr as *const _ as u32
}
}
/// SPI3 is used as a ZST (zero-sized type) for indicating a DMA transfer into the SPI3 TX FIFO
/// whenever the tim2 update dma request occurs.
struct SPI3 {
_channel: sampling_timer::tim2::Channel2,
}
impl SPI3 {
pub fn new(_channel: sampling_timer::tim2::Channel2) -> Self {
Self { _channel }
}
}
// Note(unsafe): This structure is only safe to instantiate once. The DMA request is hard-coded and
// may only be used if ownership of the timer2 channel 2 compare channel is assured, which is
// ensured by maintaining ownership of the channel.
unsafe impl TargetAddress<MemoryToPeripheral> for SPI3 {
/// SPI3 is configured to operate using 16-bit transfer words.
type MemSize = u16;
/// SPI3 DMA requests are generated whenever TIM2 CH2 comparison occurs.
const REQUEST_LINE: Option<u8> = Some(DMAReq::TIM2_CH2 as u8);
/// Whenever the DMA request occurs, it should write into SPI3's TX FIFO to start a DMA
/// transfer.
fn address(&self) -> u32 {
// Note(unsafe): It is assumed that SPI3 is owned by another DMA transfer and this DMA is
// only used for the transmit-half of DMA.
let regs = unsafe { &*hal::stm32::SPI3::ptr() };
&regs.txdr as *const _ as u32
}
}
/// Represents both ADC input channels.
pub struct AdcInputs {
adc0: Adc0Input,
adc1: Adc1Input,
}
impl AdcInputs {
/// Construct the ADC inputs.
pub fn new(adc0: Adc0Input, adc1: Adc1Input) -> Self {
Self { adc0, adc1 }
}
/// Interrupt handler to handle when the sample collection DMA transfer completes.
///
/// # Returns
/// (adc0, adc1) where adcN is a reference to the collected ADC samples. Two array references
/// are returned - one for each ADC sample stream.
pub fn transfer_complete_handler(
&mut self,
) -> (&[u16; SAMPLE_BUFFER_SIZE], &[u16; SAMPLE_BUFFER_SIZE]) {
let adc0_buffer = self.adc0.transfer_complete_handler();
let adc1_buffer = self.adc1.transfer_complete_handler();
(adc0_buffer, adc1_buffer)
}
}
/// Represents data associated with ADC0.
pub struct Adc0Input {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
transfer: Transfer<
hal::dma::dma::Stream1<hal::stm32::DMA1>,
hal::spi::Spi<hal::stm32::SPI2, hal::spi::Disabled, u16>,
PeripheralToMemory,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
_trigger_transfer: Transfer<
hal::dma::dma::Stream0<hal::stm32::DMA1>,
SPI2,
MemoryToPeripheral,
&'static mut [u16; 1],
>,
}
impl Adc0Input {
/// Construct the ADC0 input channel.
///
/// # Args
/// * `spi` - The SPI interface used to communicate with the ADC.
/// * `trigger_stream` - The DMA stream used to trigger each ADC transfer by writing a word into
/// the SPI TX FIFO.
/// * `data_stream` - The DMA stream used to read samples received over SPI into a data buffer.
/// * `_trigger_channel` - The ADC sampling timer output compare channel for read triggers.
pub fn new(
spi: hal::spi::Spi<hal::stm32::SPI2, hal::spi::Enabled, u16>,
trigger_stream: hal::dma::dma::Stream0<hal::stm32::DMA1>,
data_stream: hal::dma::dma::Stream1<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::Channel1,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The trigger stream constantly writes to the TX FIFO using a static word (dont-care
// contents). Thus, neither the memory or peripheral address ever change. This is run in
// circular mode to be completed at every DMA request.
let trigger_config = DmaConfig::default()
.priority(Priority::High)
.circular_buffer(true);
// Construct the trigger stream to write from memory to the peripheral.
let mut trigger_transfer: Transfer<_, _, MemoryToPeripheral, _> =
Transfer::init(
trigger_stream,
SPI2::new(trigger_channel),
// Note(unsafe): Because this is a Memory->Peripheral transfer, this data is never
// actually modified. It technically only needs to be immutably borrowed, but the
// current HAL API only supports mutable borrows.
unsafe { &mut SPI_START },
None,
trigger_config,
);
// The data stream constantly reads from the SPI RX FIFO into a RAM buffer. The peripheral
// stalls reads of the SPI RX FIFO until data is available, so the DMA transfer completes
// after the requested number of samples have been collected. Note that only ADC1's data
// stream is used to trigger a transfer completion interrupt.
let data_config = DmaConfig::default()
.memory_increment(true)
.priority(Priority::VeryHigh);
// A SPI peripheral error interrupt is used to determine if the RX FIFO overflows. This
// indicates that samples were dropped due to excessive processing time in the main
// application (e.g. a second DMA transfer completes before the first was done with
// processing). This is used as a flow control indicator to guarantee that no ADC samples
// are lost.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// The data transfer is always a transfer of data from the peripheral to a RAM buffer.
let mut data_transfer: Transfer<_, _, PeripheralToMemory, _> =
Transfer::init(
data_stream,
spi,
// Note(unsafe): The ADC0_BUF0 is "owned" by this peripheral. It shall not be used
// anywhere else in the module.
unsafe { &mut ADC0_BUF0 },
None,
data_config,
);
data_transfer.start(|spi| {
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_rx();
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
});
trigger_transfer.start(|_| {});
Self {
// Note(unsafe): The ADC0_BUF1 is "owned" by this peripheral. It shall not be used
// anywhere else in the module.
next_buffer: unsafe { Some(&mut ADC0_BUF1) },
transfer: data_transfer,
_trigger_transfer: trigger_transfer,
} }
} impl $spi {
pub fn new(
/// Handle a transfer completion. _channel: sampling_timer::tim2::$trigger_channel,
/// ) -> Self {
/// # Returns Self { _channel }
/// A reference to the underlying buffer that has been filled with ADC samples. }
pub fn transfer_complete_handler(&mut self) -> &[u16; SAMPLE_BUFFER_SIZE] {
let next_buffer = self.next_buffer.take().unwrap();
// Wait for the transfer to fully complete before continuing.
// Note: If a device hangs up, check that this conditional is passing correctly, as there is
// no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
// Start the next transfer.
self.transfer.clear_interrupts();
let (prev_buffer, _) =
self.transfer.next_transfer(next_buffer).unwrap();
self.next_buffer.replace(prev_buffer);
self.next_buffer.as_ref().unwrap()
}
}
/// Represents the data input stream from ADC1
pub struct Adc1Input {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
transfer: Transfer<
hal::dma::dma::Stream3<hal::stm32::DMA1>,
hal::spi::Spi<hal::stm32::SPI3, hal::spi::Disabled, u16>,
PeripheralToMemory,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
_trigger_transfer: Transfer<
hal::dma::dma::Stream2<hal::stm32::DMA1>,
SPI3,
MemoryToPeripheral,
&'static mut [u16; 1],
>,
}
impl Adc1Input {
/// Construct a new ADC1 input data stream.
///
/// # Args
/// * `spi` - The SPI interface connected to ADC1.
/// * `trigger_stream` - The DMA stream used to trigger ADC conversions on the SPI interface.
/// * `data_stream` - The DMA stream used to read ADC samples from the SPI RX FIFO.
/// * `trigger_channel` - The ADC sampling timer output compare channel for read triggers.
pub fn new(
spi: hal::spi::Spi<hal::stm32::SPI3, hal::spi::Enabled, u16>,
trigger_stream: hal::dma::dma::Stream2<hal::stm32::DMA1>,
data_stream: hal::dma::dma::Stream3<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::Channel2,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The trigger stream constantly writes to the TX FIFO using a static word (dont-care
// contents). Thus, neither the memory or peripheral address ever change. This is run in
// circular mode to be completed at every DMA request.
let trigger_config = DmaConfig::default()
.priority(Priority::High)
.circular_buffer(true);
// Construct the trigger stream to write from memory to the peripheral.
let mut trigger_transfer: Transfer<_, _, MemoryToPeripheral, _> =
Transfer::init(
trigger_stream,
SPI3::new(trigger_channel),
// Note(unsafe). This transaction is read-only and SPI_START is a dont-care value,
// so it is always safe to share.
unsafe { &mut SPI_START },
None,
trigger_config,
);
// The data stream constantly reads from the SPI RX FIFO into a RAM buffer. The peripheral
// stalls reads of the SPI RX FIFO until data is available, so the DMA transfer completes
// after the requested number of samples have been collected. Note that only ADC1's data
// stream is used to trigger a transfer completion interrupt.
let data_config = DmaConfig::default()
.memory_increment(true)
.transfer_complete_interrupt(true)
.priority(Priority::VeryHigh);
// A SPI peripheral error interrupt is used to determine if the RX FIFO overflows. This
// indicates that samples were dropped due to excessive processing time in the main
// application (e.g. a second DMA transfer completes before the first was done with
// processing). This is used as a flow control indicator to guarantee that no ADC samples
// are lost.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// The data transfer is always a transfer of data from the peripheral to a RAM buffer.
let mut data_transfer: Transfer<_, _, PeripheralToMemory, _> =
Transfer::init(
data_stream,
spi,
// Note(unsafe): The ADC1_BUF0 is "owned" by this peripheral. It shall not be used
// anywhere else in the module.
unsafe { &mut ADC1_BUF0 },
None,
data_config,
);
data_transfer.start(|spi| {
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_rx();
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
});
trigger_transfer.start(|_| {});
Self {
// Note(unsafe): The ADC1_BUF1 is "owned" by this peripheral. It shall not be used
// anywhere else in the module.
next_buffer: unsafe { Some(&mut ADC1_BUF1) },
transfer: data_transfer,
_trigger_transfer: trigger_transfer,
} }
}
/// Handle a transfer completion. // Note(unsafe): This structure is only safe to instantiate once. The DMA request is hard-coded and
/// // may only be used if ownership of the timer2 $trigger_channel compare channel is assured, which is
/// # Returns // ensured by maintaining ownership of the channel.
/// A reference to the underlying buffer that has been filled with ADC samples. unsafe impl TargetAddress<MemoryToPeripheral> for $spi {
pub fn transfer_complete_handler(&mut self) -> &[u16; SAMPLE_BUFFER_SIZE] { /// SPI is configured to operate using 16-bit transfer words.
let next_buffer = self.next_buffer.take().unwrap(); type MemSize = u16;
// Wait for the transfer to fully complete before continuing. /// SPI DMA requests are generated whenever TIM2 CHx ($dma_req) comparison occurs.
// Note: If a device hangs up, check that this conditional is passing correctly, as there is const REQUEST_LINE: Option<u8> = Some(DMAReq::$dma_req as u8);
// no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
// Start the next transfer. /// Whenever the DMA request occurs, it should write into SPI's TX FIFO to start a DMA
self.transfer.clear_interrupts(); /// transfer.
let (prev_buffer, _) = fn address(&self) -> u32 {
self.transfer.next_transfer(next_buffer).unwrap(); // Note(unsafe): It is assumed that SPI is owned by another DMA transfer and this DMA is
// only used for the transmit-half of DMA.
let regs = unsafe { &*hal::stm32::$spi::ptr() };
&regs.txdr as *const _ as u32
}
}
self.next_buffer.replace(prev_buffer); /// Represents data associated with ADC.
self.next_buffer.as_ref().unwrap() pub struct $name {
} next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
transfer: Transfer<
hal::dma::dma::$data_stream<hal::stm32::DMA1>,
hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
PeripheralToMemory,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
_trigger_transfer: Transfer<
hal::dma::dma::$trigger_stream<hal::stm32::DMA1>,
$spi,
MemoryToPeripheral,
&'static mut [u16; 1],
>,
}
impl $name {
/// Construct the ADC input channel.
///
/// # Args
/// * `spi` - The SPI interface used to communicate with the ADC.
/// * `trigger_stream` - The DMA stream used to trigger each ADC transfer by writing a word into
/// the SPI TX FIFO.
/// * `data_stream` - The DMA stream used to read samples received over SPI into a data buffer.
/// * `_trigger_channel` - The ADC sampling timer output compare channel for read triggers.
pub fn new(
spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Enabled, u16>,
trigger_stream: hal::dma::dma::$trigger_stream<
hal::stm32::DMA1,
>,
data_stream: hal::dma::dma::$data_stream<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::$trigger_channel,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The trigger stream constantly writes to the TX FIFO using a static word (dont-care
// contents). Thus, neither the memory or peripheral address ever change. This is run in
// circular mode to be completed at every DMA request.
let trigger_config = DmaConfig::default()
.priority(Priority::High)
.circular_buffer(true);
// Construct the trigger stream to write from memory to the peripheral.
let mut trigger_transfer: Transfer<
_,
_,
MemoryToPeripheral,
_,
> = Transfer::init(
trigger_stream,
$spi::new(trigger_channel),
// Note(unsafe): Because this is a Memory->Peripheral transfer, this data is never
// actually modified. It technically only needs to be immutably borrowed, but the
// current HAL API only supports mutable borrows.
unsafe { &mut SPI_START },
None,
trigger_config,
);
// The data stream constantly reads from the SPI RX FIFO into a RAM buffer. The peripheral
// stalls reads of the SPI RX FIFO until data is available, so the DMA transfer completes
// after the requested number of samples have been collected. Note that only ADC1's (sic!)
// data stream is used to trigger a transfer completion interrupt.
let data_config = DmaConfig::default()
.memory_increment(true)
.transfer_complete_interrupt($index == 1)
.priority(Priority::VeryHigh);
// A SPI peripheral error interrupt is used to determine if the RX FIFO overflows. This
// indicates that samples were dropped due to excessive processing time in the main
// application (e.g. a second DMA transfer completes before the first was done with
// processing). This is used as a flow control indicator to guarantee that no ADC samples
// are lost.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// The data transfer is always a transfer of data from the peripheral to a RAM buffer.
let mut data_transfer: Transfer<_, _, PeripheralToMemory, _> =
Transfer::init(
data_stream,
spi,
// Note(unsafe): The ADC_BUF[$index][0] is "owned" by this peripheral.
// It shall not be used anywhere else in the module.
unsafe { &mut ADC_BUF[$index][0] },
None,
data_config,
);
data_transfer.start(|spi| {
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_rx();
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
});
trigger_transfer.start(|_| {});
Self {
// Note(unsafe): The ADC_BUF[$index][1] is "owned" by this peripheral. It shall not be used
// anywhere else in the module.
next_buffer: unsafe { Some(&mut ADC_BUF[$index][1]) },
transfer: data_transfer,
_trigger_transfer: trigger_transfer,
}
}
/// Obtain a buffer filled with ADC samples.
///
/// # Returns
/// A reference to the underlying buffer that has been filled with ADC samples.
pub fn acquire_buffer(&mut self) -> &[u16; SAMPLE_BUFFER_SIZE] {
// Wait for the transfer to fully complete before continuing.
// Note: If a device hangs up, check that this conditional is passing correctly, as there is
// no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
let next_buffer = self.next_buffer.take().unwrap();
// Start the next transfer.
self.transfer.clear_interrupts();
let (prev_buffer, _) =
self.transfer.next_transfer(next_buffer).unwrap();
self.next_buffer.replace(prev_buffer); // .unwrap_none() https://github.com/rust-lang/rust/issues/62633
self.next_buffer.as_ref().unwrap()
}
}
};
} }
adc_input!(Adc0Input, 0, Stream0, Stream1, SPI2, Channel1, TIM2_CH1);
adc_input!(Adc1Input, 1, Stream2, Stream3, SPI3, Channel2, TIM2_CH2);

View File

@ -11,306 +11,147 @@ use super::{
// The following global buffers are used for the DAC code DMA transfers. Two buffers are used for // The following global buffers are used for the DAC code DMA transfers. Two buffers are used for
// each transfer in a ping-pong buffer configuration (one is being prepared while the other is being // each transfer in a ping-pong buffer configuration (one is being prepared while the other is being
// processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on // processed). Note that the contents of AXI SRAM is uninitialized, so the buffer contents on
// startup are undefined. // startup are undefined. The dimensions are `ADC_BUF[adc_index][ping_pong_index][sample_index]`.
#[link_section = ".axisram.buffers"] #[link_section = ".axisram.buffers"]
static mut DAC0_BUF0: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; static mut DAC_BUF: [[[u16; SAMPLE_BUFFER_SIZE]; 2]; 2] =
[[[0; SAMPLE_BUFFER_SIZE]; 2]; 2];
#[link_section = ".axisram.buffers"] macro_rules! dac_output {
static mut DAC0_BUF1: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; ($name:ident, $index:literal, $data_stream:ident,
$spi:ident, $trigger_channel:ident, $dma_req:ident) => {
#[link_section = ".axisram.buffers"] /// $spi is used as a type for indicating a DMA transfer into the SPI TX FIFO
static mut DAC1_BUF0: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE]; struct $spi {
spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
#[link_section = ".axisram.buffers"] _channel: sampling_timer::tim2::$trigger_channel,
static mut DAC1_BUF1: [u16; SAMPLE_BUFFER_SIZE] = [0; SAMPLE_BUFFER_SIZE];
/// SPI4 is used as a type for indicating a DMA transfer into the SPI4 TX FIFO
struct SPI4 {
spi: hal::spi::Spi<hal::stm32::SPI4, hal::spi::Disabled, u16>,
_channel: sampling_timer::tim2::Channel3,
}
impl SPI4 {
pub fn new(
_channel: sampling_timer::tim2::Channel3,
spi: hal::spi::Spi<hal::stm32::SPI4, hal::spi::Disabled, u16>,
) -> Self {
Self { _channel, spi }
}
}
// Note(unsafe): This is safe because the DMA request line is logically owned by this module.
// Additionally, the SPI is owned by this structure and is known to be configured for u16 word
// sizes.
unsafe impl TargetAddress<MemoryToPeripheral> for SPI4 {
/// SPI2 is configured to operate using 16-bit transfer words.
type MemSize = u16;
/// SPI4 DMA requests are generated whenever TIM2 CH3 comparison occurs.
const REQUEST_LINE: Option<u8> = Some(DMAReq::TIM2_CH3 as u8);
/// Whenever the DMA request occurs, it should write into SPI4's TX FIFO.
fn address(&self) -> u32 {
&self.spi.inner().txdr as *const _ as u32
}
}
/// SPI5 is used as a ZST (zero-sized type) for indicating a DMA transfer into the SPI5 TX FIFO
struct SPI5 {
_channel: sampling_timer::tim2::Channel4,
spi: hal::spi::Spi<hal::stm32::SPI5, hal::spi::Disabled, u16>,
}
impl SPI5 {
pub fn new(
_channel: sampling_timer::tim2::Channel4,
spi: hal::spi::Spi<hal::stm32::SPI5, hal::spi::Disabled, u16>,
) -> Self {
Self { _channel, spi }
}
}
// Note(unsafe): This is safe because the DMA request line is logically owned by this module.
// Additionally, the SPI is owned by this structure and is known to be configured for u16 word
// sizes.
unsafe impl TargetAddress<MemoryToPeripheral> for SPI5 {
/// SPI5 is configured to operate using 16-bit transfer words.
type MemSize = u16;
/// SPI5 DMA requests are generated whenever TIM2 CH4 comparison occurs.
const REQUEST_LINE: Option<u8> = Some(DMAReq::TIM2_CH4 as u8);
/// Whenever the DMA request occurs, it should write into SPI5's TX FIFO
fn address(&self) -> u32 {
&self.spi.inner().txdr as *const _ as u32
}
}
/// Represents both DAC output channels.
pub struct DacOutputs {
dac0: Dac0Output,
dac1: Dac1Output,
}
impl DacOutputs {
/// Construct the DAC outputs.
pub fn new(dac0: Dac0Output, dac1: Dac1Output) -> Self {
Self { dac0, dac1 }
}
/// Borrow the next DAC output buffers to populate the DAC output codes in-place.
///
/// # Returns
/// (dac0, dac1) where each value is a mutable reference to the output code array for DAC0 and
/// DAC1 respectively.
pub fn prepare_data(
&mut self,
) -> (
&mut [u16; SAMPLE_BUFFER_SIZE],
&mut [u16; SAMPLE_BUFFER_SIZE],
) {
(self.dac0.prepare_buffer(), self.dac1.prepare_buffer())
}
/// Enqueue the next DAC output codes for transmission.
///
/// # Note
/// It is assumed that data was populated using `prepare_data()` before this function is
/// called.
pub fn commit_data(&mut self) {
self.dac0.commit_buffer();
self.dac1.commit_buffer();
}
}
/// Represents data associated with DAC0.
pub struct Dac0Output {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
// Note: SPI TX functionality may not be used from this structure to ensure safety with DMA.
transfer: Transfer<
hal::dma::dma::Stream4<hal::stm32::DMA1>,
SPI4,
MemoryToPeripheral,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
first_transfer: bool,
}
impl Dac0Output {
/// Construct the DAC0 output channel.
///
/// # Args
/// * `spi` - The SPI interface used to communicate with the ADC.
/// * `stream` - The DMA stream used to write DAC codes over SPI.
/// * `trigger_channel` - The sampling timer output compare channel for update triggers.
pub fn new(
spi: hal::spi::Spi<hal::stm32::SPI4, hal::spi::Enabled, u16>,
stream: hal::dma::dma::Stream4<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::Channel3,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The stream constantly writes to the TX FIFO to write new update codes.
let trigger_config = DmaConfig::default()
.memory_increment(true)
.peripheral_increment(false);
// Listen for any potential SPI error signals, which may indicate that we are not generating
// update codes.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
// Construct the trigger stream to write from memory to the peripheral.
let transfer: Transfer<_, _, MemoryToPeripheral, _> = Transfer::init(
stream,
SPI4::new(trigger_channel, spi),
// Note(unsafe): This buffer is only used once and provided for the DMA transfer.
unsafe { &mut DAC0_BUF0 },
None,
trigger_config,
);
Self {
transfer,
// Note(unsafe): This buffer is only used once and provided for the next DMA transfer.
next_buffer: unsafe { Some(&mut DAC0_BUF1) },
first_transfer: true,
}
}
/// Mutably borrow the next output buffer to populate it with DAC codes.
pub fn prepare_buffer(&mut self) -> &mut [u16; SAMPLE_BUFFER_SIZE] {
self.next_buffer.as_mut().unwrap()
}
/// Enqueue the next buffer for transmission to the DAC.
///
/// # Args
/// * `data` - The next data to write to the DAC.
pub fn commit_buffer(&mut self) {
let next_buffer = self.next_buffer.take().unwrap();
// If the last transfer was not complete, we didn't write all our previous DAC codes.
// Wait for all the DAC codes to get written as well.
if self.first_transfer {
self.first_transfer = false
} else {
// Note: If a device hangs up, check that this conditional is passing correctly, as
// there is no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
} }
// Start the next transfer. impl $spi {
self.transfer.clear_interrupts(); pub fn new(
let (prev_buffer, _) = _channel: sampling_timer::tim2::$trigger_channel,
self.transfer.next_transfer(next_buffer).unwrap(); spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Disabled, u16>,
) -> Self {
self.next_buffer.replace(prev_buffer); Self { _channel, spi }
} }
}
/// Represents the data output stream from DAC1.
pub struct Dac1Output {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
transfer: Transfer<
hal::dma::dma::Stream5<hal::stm32::DMA1>,
SPI5,
MemoryToPeripheral,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
first_transfer: bool,
}
impl Dac1Output {
/// Construct a new DAC1 output data stream.
///
/// # Args
/// * `spi` - The SPI interface connected to DAC1.
/// * `stream` - The DMA stream used to write DAC codes the SPI TX FIFO.
/// * `trigger_channel` - The timer channel used to generate DMA requests for DAC updates.
pub fn new(
spi: hal::spi::Spi<hal::stm32::SPI5, hal::spi::Enabled, u16>,
stream: hal::dma::dma::Stream5<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::Channel4,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The trigger stream constantly writes to the TX FIFO to generate DAC updates.
let trigger_config = DmaConfig::default()
.memory_increment(true)
.peripheral_increment(false)
.circular_buffer(true);
// Listen for any SPI errors, as this may indicate that we are not generating updates on the
// DAC.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
// Construct the stream to write from memory to the peripheral.
let transfer: Transfer<_, _, MemoryToPeripheral, _> = Transfer::init(
stream,
SPI5::new(trigger_channel, spi),
// Note(unsafe): This buffer is only used once and provided to the transfer.
unsafe { &mut DAC1_BUF0 },
None,
trigger_config,
);
Self {
// Note(unsafe): This buffer is only used once and provided for the next DMA transfer.
next_buffer: unsafe { Some(&mut DAC1_BUF1) },
transfer,
first_transfer: true,
}
}
/// Mutably borrow the next output buffer to populate it with DAC codes.
pub fn prepare_buffer(&mut self) -> &mut [u16; SAMPLE_BUFFER_SIZE] {
self.next_buffer.as_mut().unwrap()
}
/// Enqueue the next buffer for transmission to the DAC.
///
/// # Args
/// * `data` - The next data to write to the DAC.
pub fn commit_buffer(&mut self) {
let next_buffer = self.next_buffer.take().unwrap();
// If the last transfer was not complete, we didn't write all our previous DAC codes.
// Wait for all the DAC codes to get written as well.
if self.first_transfer {
self.first_transfer = false
} else {
// Note: If a device hangs up, check that this conditional is passing correctly, as
// there is no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
} }
// Start the next transfer. // Note(unsafe): This is safe because the DMA request line is logically owned by this module.
self.transfer.clear_interrupts(); // Additionally, the SPI is owned by this structure and is known to be configured for u16 word
let (prev_buffer, _) = // sizes.
self.transfer.next_transfer(next_buffer).unwrap(); unsafe impl TargetAddress<MemoryToPeripheral> for $spi {
/// SPI is configured to operate using 16-bit transfer words.
type MemSize = u16;
self.next_buffer.replace(prev_buffer); /// SPI DMA requests are generated whenever TIM2 CHx ($dma_req) comparison occurs.
} const REQUEST_LINE: Option<u8> = Some(DMAReq::$dma_req as u8);
/// Whenever the DMA request occurs, it should write into SPI's TX FIFO.
fn address(&self) -> u32 {
&self.spi.inner().txdr as *const _ as u32
}
}
/// Represents data associated with DAC.
pub struct $name {
next_buffer: Option<&'static mut [u16; SAMPLE_BUFFER_SIZE]>,
// Note: SPI TX functionality may not be used from this structure to ensure safety with DMA.
transfer: Transfer<
hal::dma::dma::$data_stream<hal::stm32::DMA1>,
$spi,
MemoryToPeripheral,
&'static mut [u16; SAMPLE_BUFFER_SIZE],
>,
first_transfer: bool,
}
impl $name {
/// Construct the DAC output channel.
///
/// # Args
/// * `spi` - The SPI interface used to communicate with the ADC.
/// * `stream` - The DMA stream used to write DAC codes over SPI.
/// * `trigger_channel` - The sampling timer output compare channel for update triggers.
pub fn new(
spi: hal::spi::Spi<hal::stm32::$spi, hal::spi::Enabled, u16>,
stream: hal::dma::dma::$data_stream<hal::stm32::DMA1>,
trigger_channel: sampling_timer::tim2::$trigger_channel,
) -> Self {
// Generate DMA events when an output compare of the timer hitting zero (timer roll over)
// occurs.
trigger_channel.listen_dma();
trigger_channel.to_output_compare(0);
// The stream constantly writes to the TX FIFO to write new update codes.
let trigger_config = DmaConfig::default()
.memory_increment(true)
.peripheral_increment(false);
// Listen for any potential SPI error signals, which may indicate that we are not generating
// update codes.
let mut spi = spi.disable();
spi.listen(hal::spi::Event::Error);
// Allow the SPI FIFOs to operate using only DMA data channels.
spi.enable_dma_tx();
// Enable SPI and start it in infinite transaction mode.
spi.inner().cr1.modify(|_, w| w.spe().set_bit());
spi.inner().cr1.modify(|_, w| w.cstart().started());
// Construct the trigger stream to write from memory to the peripheral.
let transfer: Transfer<_, _, MemoryToPeripheral, _> =
Transfer::init(
stream,
$spi::new(trigger_channel, spi),
// Note(unsafe): This buffer is only used once and provided for the DMA transfer.
unsafe { &mut DAC_BUF[$index][0] },
None,
trigger_config,
);
Self {
transfer,
// Note(unsafe): This buffer is only used once and provided for the next DMA transfer.
next_buffer: unsafe { Some(&mut DAC_BUF[$index][1]) },
first_transfer: true,
}
}
/// Acquire the next output buffer to populate it with DAC codes.
pub fn acquire_buffer(
&mut self,
) -> &'static mut [u16; SAMPLE_BUFFER_SIZE] {
self.next_buffer.take().unwrap()
}
/// Enqueue the next buffer for transmission to the DAC.
///
/// # Args
/// * `data` - The next data to write to the DAC.
pub fn release_buffer(
&mut self,
next_buffer: &'static mut [u16; SAMPLE_BUFFER_SIZE],
) {
// If the last transfer was not complete, we didn't write all our previous DAC codes.
// Wait for all the DAC codes to get written as well.
if self.first_transfer {
self.first_transfer = false
} else {
// Note: If a device hangs up, check that this conditional is passing correctly, as
// there is no time-out checks here in the interest of execution speed.
while !self.transfer.get_transfer_complete_flag() {}
}
// Start the next transfer.
self.transfer.clear_interrupts();
let (prev_buffer, _) =
self.transfer.next_transfer(next_buffer).unwrap();
// .unwrap_none() https://github.com/rust-lang/rust/issues/62633
self.next_buffer.replace(prev_buffer);
}
}
};
} }
dac_output!(Dac0Output, 0, Stream4, SPI4, Channel3, TIM2_CH3);
dac_output!(Dac1Output, 1, Stream5, SPI5, Channel4, TIM2_CH4);

View File

@ -13,6 +13,9 @@
fn panic(_info: &core::panic::PanicInfo) -> ! { fn panic(_info: &core::panic::PanicInfo) -> ! {
let gpiod = unsafe { &*hal::stm32::GPIOD::ptr() }; let gpiod = unsafe { &*hal::stm32::GPIOD::ptr() };
gpiod.odr.modify(|_, w| w.odr6().high().odr12().high()); // FP_LED_1, FP_LED_3 gpiod.odr.modify(|_, w| w.odr6().high().odr12().high()); // FP_LED_1, FP_LED_3
#[cfg(feature = "nightly")]
core::intrinsics::abort();
#[cfg(not(feature = "nightly"))]
unsafe { unsafe {
core::intrinsics::abort(); core::intrinsics::abort();
} }
@ -70,8 +73,8 @@ mod pounder;
mod sampling_timer; mod sampling_timer;
mod server; mod server;
use adc::{Adc0Input, Adc1Input, AdcInputs}; use adc::{Adc0Input, Adc1Input};
use dac::{Dac0Output, Dac1Output, DacOutputs}; use dac::{Dac0Output, Dac1Output};
use dsp::iir; use dsp::iir;
use pounder::DdsOutput; use pounder::DdsOutput;
@ -189,11 +192,10 @@ macro_rules! route_request {
#[rtic::app(device = stm32h7xx_hal::stm32, peripherals = true, monotonic = rtic::cyccnt::CYCCNT)] #[rtic::app(device = stm32h7xx_hal::stm32, peripherals = true, monotonic = rtic::cyccnt::CYCCNT)]
const APP: () = { const APP: () = {
struct Resources { struct Resources {
afe0: AFE0, afes: (AFE0, AFE1),
afe1: AFE1,
adcs: AdcInputs, adcs: (Adc0Input, Adc1Input),
dacs: DacOutputs, dacs: (Dac0Output, Dac1Output),
eeprom_i2c: hal::i2c::I2c<hal::stm32::I2C2>, eeprom_i2c: hal::i2c::I2c<hal::stm32::I2C2>,
@ -362,7 +364,7 @@ const APP: () = {
) )
}; };
AdcInputs::new(adc0, adc1) (adc0, adc1)
}; };
let dacs = { let dacs = {
@ -447,7 +449,7 @@ const APP: () = {
dma_streams.5, dma_streams.5,
sampling_timer_channels.ch4, sampling_timer_channels.ch4,
); );
DacOutputs::new(dac0, dac1) (dac0, dac1)
}; };
let mut fp_led_0 = gpiod.pd5.into_push_pull_output(); let mut fp_led_0 = gpiod.pd5.into_push_pull_output();
@ -777,8 +779,7 @@ const APP: () = {
sampling_timer.start(); sampling_timer.start();
init::LateResources { init::LateResources {
afe0, afes: (afe0, afe1),
afe1,
adcs, adcs,
dacs, dacs,
@ -792,29 +793,28 @@ const APP: () = {
} }
} }
#[task(binds=DMA1_STR3, resources=[adcs, dacs, dds_output, iir_state, iir_ch], priority=2)] #[task(binds=DMA1_STR3, resources=[adcs, dacs, iir_state, iir_ch, dds_output], priority=2)]
fn adc_update(c: adc_update::Context) { fn process(c: process::Context) {
let (adc0_samples, adc1_samples) = let adc_samples = [
c.resources.adcs.transfer_complete_handler(); c.resources.adcs.0.acquire_buffer(),
c.resources.adcs.1.acquire_buffer(),
];
let dac_samples = [
c.resources.dacs.0.acquire_buffer(),
c.resources.dacs.1.acquire_buffer(),
];
let (dac0, dac1) = c.resources.dacs.prepare_data(); for channel in 0..adc_samples.len() {
for sample in 0..adc_samples[0].len() {
for (i, (adc0, adc1)) in let x = f32::from(adc_samples[channel][sample] as i16);
adc0_samples.iter().zip(adc1_samples.iter()).enumerate() let y = c.resources.iir_ch[channel]
{ .update(&mut c.resources.iir_state[channel], x);
dac0[i] = { // Note(unsafe): The filter limits ensure that the value is in range.
let x0 = f32::from(*adc0 as i16); // The truncation introduces 1/2 LSB distortion.
let y0 = c.resources.iir_ch[0] let y = unsafe { y.to_int_unchecked::<i16>() };
.update(&mut c.resources.iir_state[0], x0); // Convert to DAC code
y0 as i16 as u16 ^ 0x8000 dac_samples[channel][sample] = y as u16 ^ 0x8000;
}; }
dac1[i] = {
let x1 = f32::from(*adc1 as i16);
let y1 = c.resources.iir_ch[1]
.update(&mut c.resources.iir_state[1], x1);
y1 as i16 as u16 ^ 0x8000
};
} }
if let Some(dds_output) = c.resources.dds_output { if let Some(dds_output) = c.resources.dds_output {
@ -824,13 +824,16 @@ const APP: () = {
None, None,
None, None,
); );
builder.write_profile(); builder.write_profile();
} }
c.resources.dacs.commit_data(); let [dac0, dac1] = dac_samples;
c.resources.dacs.0.release_buffer(dac0);
c.resources.dacs.1.release_buffer(dac1);
} }
#[idle(resources=[net_interface, mac_addr, eth_mac, iir_state, iir_ch, afe0, afe1])] #[idle(resources=[net_interface, pounder, mac_addr, eth_mac, iir_state, iir_ch, afes])]
fn idle(mut c: idle::Context) -> ! { fn idle(mut c: idle::Context) -> ! {
let mut socket_set_entries: [_; 8] = Default::default(); let mut socket_set_entries: [_; 8] = Default::default();
let mut sockets = let mut sockets =
@ -890,8 +893,8 @@ const APP: () = {
Ok::<server::Status, ()>(state) Ok::<server::Status, ()>(state)
}), }),
"stabilizer/afe0/gain": (|| c.resources.afe0.get_gain()), "stabilizer/afe0/gain": (|| c.resources.afes.0.get_gain()),
"stabilizer/afe1/gain": (|| c.resources.afe1.get_gain()) "stabilizer/afe1/gain": (|| c.resources.afes.1.get_gain())
], ],
modifiable_attributes: [ modifiable_attributes: [
@ -918,11 +921,11 @@ const APP: () = {
}) })
}), }),
"stabilizer/afe0/gain": afe::Gain, (|gain| { "stabilizer/afe0/gain": afe::Gain, (|gain| {
c.resources.afe0.set_gain(gain); c.resources.afes.0.set_gain(gain);
Ok::<(), ()>(()) Ok::<(), ()>(())
}), }),
"stabilizer/afe1/gain": afe::Gain, (|gain| { "stabilizer/afe1/gain": afe::Gain, (|gain| {
c.resources.afe1.set_gain(gain); c.resources.afes.1.set_gain(gain);
Ok::<(), ()>(()) Ok::<(), ()>(())
}) })
] ]

View File

@ -47,7 +47,6 @@ impl DdsOutput {
); );
} }
} }
// Trigger the IO_update signal generating timer to asynchronous create the IO_Update pulse. // Trigger the IO_update signal generating timer to asynchronous create the IO_Update pulse.
self.io_update_trigger.trigger(); self.io_update_trigger.trigger();
} }