Merge pull request #254 from sergachev/master

readme: fix source path and binary names
This commit is contained in:
Robert Jördens 2021-02-01 23:47:07 +01:00 committed by GitHub
commit 6b02e84a5d
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 5 deletions

View File

@ -22,7 +22,7 @@
## Limitations/TODOs
* Fixed AFE gains
* The IP and MAC address are [hardcoded](src/main.rs)
* The IP and MAC address are [hardcoded](src/hardware/configuration.rs)
* Expose configurable limits
* 100Base-T only
* Digital IO, GPIO header, AFE header, EEM header are not handled
@ -64,14 +64,14 @@ See https://github.com/sinara-hw/Stabilizer
* Install the DFU USB tool (`dfu-util`)
* Connect to the Micro USB connector below the RJ45
* Short JC2/BOOT
* `cargo objcopy --release --bin stabilizer -- -O binary stabilizer.bin` or `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/stabilizer stabilizer.bin`
* `dfu-util -a 0 -s 0x08000000:leave -D stabilizer.bin`
* `cargo objcopy --release --bin dual-iir -- -O binary dual-iir.bin` or `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/dual-iir dual-iir.bin`
* `dfu-util -a 0 -s 0x08000000:leave -D dual-iir.bin`
### Using ST-Link virtual mass storage
* `cargo objcopy --release --bin stabilizer -- -O binary stabilizer.bin` or `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/stabilizer stabilizer.bin`
* `cargo objcopy --release --bin dual-iir -- -O binary dual-iir.bin` or `arm-none-eabi-objcopy -O binary target/thumbv7em-none-eabihf/release/dual-iir dual-iir.bin`
* Connect the ST-Link debugger
* copy `stabilizer.bin` to the `NODE_H743ZI` USB disk
* copy `dual-iir.bin` to the `NODE_H743ZI` USB disk
## Protocol