1
0
Fork 0
Bare-metal Rust on Zynq-7000
Go to file
pca006132 511c906d4d libcortex_a9/uncached: fixed mmu setting 2020-08-20 13:01:49 +08:00
.cargo update rust + smoltcp 2019-11-11 00:28:46 +01:00
experiments libboard_zynq: make RegisterBlock constructors more consistent 2020-08-13 14:49:26 +08:00
libasync libasync: improve scheduling fairness between block_on and spawned tasks 2020-08-17 00:58:12 +02:00
libboard_zynq stdio::drop_uart(): add delay 2020-08-17 19:38:41 +02:00
libcortex_a9 libcortex_a9/uncached: fixed mmu setting 2020-08-20 13:01:49 +08:00
libregister finished register definitions 2020-05-01 15:38:07 +08:00
libsupport_zynq libsupport_zynq/boot: fix cache mainteinance opertaions 2020-08-20 13:01:49 +08:00
openocd openocd: fix cora z7-10 PL_TAPID 2020-05-16 01:34:09 +02:00
.gitignore remove zc706.elf from gitignore 2020-01-16 02:13:11 +08:00
Cargo.lock linked_list_allocator: upgraded to 0.8.4 2020-08-03 14:48:17 +08:00
Cargo.toml Cargo.toml: flip LTO back on to fit OCM 2020-04-10 20:41:16 +02:00
README.md Update README and build.sh (#59) 2020-08-11 11:24:21 +08:00
armv7-none-eabihf.json define custom target, use with cargo-xbuild 2019-08-06 22:03:04 +02:00
build.sh Update README and build.sh (#59) 2020-08-11 11:24:21 +08:00
channel-rust-nightly.toml Cargo.lock: fix 2020-04-25 02:03:57 +02:00
default.nix updated cargoSha256 2020-08-03 14:59:49 +08:00
qemu.gdb PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
remote_run.sh add remote run script 2020-06-04 19:57:52 +08:00
runner.sh PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
shell.nix Updated build instruction. 2020-08-05 17:08:24 +08:00
tmux.sh add support for cora z7 in tmux script 2020-01-24 07:51:29 +08:00

README.md

Build

nix-shell --command "cargo xbuild --release -p experiments"

Currently the ELF output is placed at target/armv7-none-eabihf/release/experiments

Debug

Using the Xilinx toolchain

Tested with the ZC706 board.

Run the Xilinx Microprocessor Debugger:

/opt/Xilinx/14.7/ISE_DS/EDK/bin/lin64/xmd

Connect to target (given it is connected and you have permissions):

connect arm hw

Leave xmd running.

Start the Xilinx version of the GNU debugger with your latest build:

/opt/Xilinx/14.7/ISE_DS/EDK/gnu/arm/lin/bin/arm-xilinx-linux-gnueabi-gdb zc706

Connect the debugger to xmd over TCP on localhost:

target remote :1234

Proceed using gdb with load, c

Using OpenOCD

Running on the ZC706

nix-shell --command "cargo xbuild --release -p experiments"
cd openocd
openocd -f zc706.cfg

Running on the Cora Z7-10

nix-shell --command "cd experiments && cargo xbuild --release --no-default-features --features=target_cora_z7_10"
cd openocd
openocd -f cora-z7-10.cfg

Loading a bitstream into volatile memory

openocd -f zc706.cfg -c "pld load 0 blinker_migen.bit; exit"

Development Process

Clone this repo onto your development/build machine and the raspberry pi that controls the Xilinx 7000 board

On the dev machine, the below script builds zc706 and secure copies it to the target pi (in your pi $HOME directory):

cd ~/zynq-rs
./build.sh $your_user_or_ssh_id

On the pi, we need an information rich environment that includes a relatively reliable gdb experience (that includes ctrl-p and ctrl-n command history that persists across cgdb executions), run:

ssh pi4
cd zynq-rs
# For ZC706, run:
./tmux.sh 0
# For Cora Z7, run:
./tmux.sh

Time to run your code with:

zynq-connect
zynq-restart
c

or, for a more succinct experience, (identical to above)

dc
dr
c

After every build on your dev machine, simply run:

dr
c

Sometimes you might need to type load after dr.