assembly/src/hw/kasli_soc.md
morgan b174819fbb kasli & kasli-soc: describe mounting fan onto heatsink (#8)
Add fan mounting instructions for kasli and kasli-soc. Fan connector's polarity pictures are included to prevent wrong connection.

Reviewed-on: sinara-hw/assembly#8
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2024-01-12 16:54:38 +08:00

584 B

Kasli_SOC

HW Setup

Check the BOOT mode switches - they both should be at SD if the Kasli-SoC going to be shipped to customer. POR jumper needs only for JTAG mode.

Mounting fan onto heatsink

  1. ⚠️ Verify the fan has the correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)
  2. Place the fan on a heatsink
  3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws)
  4. Replace the tapping screws with M2.5x14mm screws
  5. Verify the fan is secure