zynq-rs/src/zynq/flash/mod.rs

409 lines
11 KiB
Rust
Raw Normal View History

//! Quad-SPI Flash Controller
use core::marker::PhantomData;
use crate::regs::{RegisterR, RegisterW, RegisterRW};
use super::slcr;
use super::clocks::CpuClocks;
2019-12-05 06:56:38 +08:00
mod regs;
2019-12-05 08:15:14 +08:00
mod bytes;
pub use bytes::{BytesTransferExt, BytesTransfer};
2019-12-14 08:55:17 +08:00
mod spi_flash_register;
use spi_flash_register::*;
2019-12-16 02:28:55 +08:00
mod transfer;
use transfer::Transfer;
2019-11-23 08:59:24 +08:00
const FLASH_BAUD_RATE: u32 = 50_000_000;
2019-12-14 08:57:51 +08:00
/// 16 MB
pub const SINGLE_CAPACITY: u32 = 0x1000000;
pub const SECTOR_SIZE: u32 = 0x10000;
pub const PAGE_SIZE: u32 = 0x100;
2019-11-23 08:59:24 +08:00
2019-12-12 07:11:42 +08:00
/// Instruction: Read Identification
const INST_RDID: u8 = 0x9F;
2019-12-14 08:56:49 +08:00
const INST_READ: u8 = 0x03;
/// Instruction: Write Disable
const INST_WRDI: u8 = 0x04;
/// Instruction: Write Enable
const INST_WREN: u8 = 0x06;
#[derive(Clone)]
pub enum SpiWord {
W8(u8),
W16(u16),
W24(u32),
W32(u32),
}
impl From<u8> for SpiWord {
fn from(x: u8) -> Self {
SpiWord::W8(x)
}
}
impl From<u16> for SpiWord {
fn from(x: u16) -> Self {
SpiWord::W16(x)
}
}
impl From<u32> for SpiWord {
fn from(x: u32) -> Self {
SpiWord::W32(x)
}
}
2019-12-12 07:13:02 +08:00
/// Memory-mapped mode
pub struct LinearAddressing;
2019-12-12 07:13:02 +08:00
/// Manual I/O mode
pub struct Manual;
/// Flash Interface Driver
2019-11-23 08:59:24 +08:00
///
/// For 2x Spansion S25FL128SAGMFIR01
pub struct Flash<MODE> {
regs: &'static mut regs::RegisterBlock,
_mode: PhantomData<MODE>,
}
impl<MODE> Flash<MODE> {
fn transition<TO>(self) -> Flash<TO> {
Flash {
regs: self.regs,
_mode: PhantomData,
}
}
2019-12-05 06:56:38 +08:00
fn disable_interrupts(&mut self) {
self.regs.intr_dis.write(
regs::IntrDis::zeroed()
.rx_overflow(true)
.tx_fifo_not_full(true)
.tx_fifo_full(true)
.rx_fifo_not_empty(true)
.rx_fifo_full(true)
.tx_fifo_underflow(true)
);
}
fn enable_interrupts(&mut self) {
self.regs.intr_en.write(
regs::IntrEn::zeroed()
.rx_overflow(true)
.tx_fifo_not_full(true)
.tx_fifo_full(true)
.rx_fifo_not_empty(true)
.rx_fifo_full(true)
.tx_fifo_underflow(true)
);
}
fn clear_rx_fifo(&self) {
while self.regs.intr_status.read().rx_fifo_not_empty() {
let _ = self.regs.rx_data.read();
}
}
fn clear_interrupt_status(&mut self) {
self.regs.intr_status.write(
regs::IntrStatus::zeroed()
.rx_overflow(true)
.tx_fifo_underflow(true)
);
}
fn wait_tx_fifo_flush(&mut self) {
while !self.regs.intr_status.read().tx_fifo_not_full() {}
}
}
impl Flash<()> {
pub fn new(clock: u32) -> Self {
Self::enable_clocks(clock);
Self::setup_signals();
Self::reset();
let regs = regs::RegisterBlock::qspi();
let mut flash = Flash { regs, _mode: PhantomData };
2019-11-23 08:59:24 +08:00
flash.configure((FLASH_BAUD_RATE - 1 + clock) / FLASH_BAUD_RATE);
flash
}
fn enable_clocks(clock: u32) {
let io_pll = CpuClocks::get().io;
let divisor = ((clock - 1 + io_pll) / clock)
.max(1).min(63) as u8;
slcr::RegisterBlock::unlocked(|slcr| {
slcr.lqspi_clk_ctrl.write(
slcr::LqspiClkCtrl::zeroed()
.src_sel(slcr::PllSource::IoPll)
.divisor(divisor)
.clkact(true)
);
});
}
fn setup_signals() {
2019-11-23 08:59:24 +08:00
slcr::RegisterBlock::unlocked(|slcr| {
// 1. Configure MIO pin 1 for chip select 0 output.
slcr.mio_pin_01.write(
slcr::MioPin01::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
.pullup(true)
);
// Configure MIO pins 2 through 5 for I/O.
slcr.mio_pin_02.write(
slcr::MioPin02::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_03.write(
slcr::MioPin03::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_04.write(
slcr::MioPin04::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_05.write(
slcr::MioPin05::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
// 3. Configure MIO pin 6 for serial clock 0 output.
slcr.mio_pin_06.write(
slcr::MioPin06::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
2019-11-28 10:22:26 +08:00
// Option: Add Second Device Chip Select
// 4. Configure MIO pin 0 for chip select 1 output.
slcr.mio_pin_00.write(
slcr::MioPin00::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
.pullup(true)
);
// Option: Add Second Serial Clock
// 5. Configure MIO pin 9 for serial clock 1 output.
slcr.mio_pin_09.write(
slcr::MioPin09::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
// Option: Add 4-bit Data
// 6. Configure MIO pins 10 through 13 for I/O.
slcr.mio_pin_10.write(
slcr::MioPin10::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_11.write(
slcr::MioPin11::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_12.write(
slcr::MioPin12::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_13.write(
slcr::MioPin13::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
// Option: Add Feedback Output Clock
// 7. Configure MIO pin 8 for feedback clock.
slcr.mio_pin_08.write(
slcr::MioPin08::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
2019-11-23 08:59:24 +08:00
});
}
fn reset() {
slcr::RegisterBlock::unlocked(|slcr| {
slcr.lqspi_rst_ctrl.write(
slcr::LqspiRstCtrl::zeroed()
.ref_rst(true)
.cpu1x_rst(true)
);
slcr.lqspi_rst_ctrl.write(
slcr::LqspiRstCtrl::zeroed()
);
});
}
2019-11-23 08:59:24 +08:00
fn configure(&mut self, divider: u32) {
2019-12-05 06:56:38 +08:00
// Disable
self.regs.enable.write(
regs::Enable::zeroed()
);
2019-12-03 09:41:49 +08:00
self.disable_interrupts();
2019-12-05 06:56:38 +08:00
self.regs.lqspi_cfg.write(
regs::LqspiCfg::zeroed()
);
2019-12-03 09:41:49 +08:00
self.clear_rx_fifo();
2019-12-05 06:56:38 +08:00
self.clear_interrupt_status();
2019-12-03 09:41:49 +08:00
2019-11-23 08:59:24 +08:00
// for a baud_rate_div=1 LPBK_DLY_ADJ would be required
let mut baud_rate_div = 2u32;
while baud_rate_div < 7 && 2u32.pow(1 + baud_rate_div) < divider {
baud_rate_div += 1;
}
self.regs.config.write(regs::Config::zeroed()
2019-11-23 08:59:24 +08:00
.baud_rate_div(baud_rate_div as u8)
.mode_sel(true)
.leg_flsh(true)
2019-12-05 06:56:38 +08:00
.holdb_dr(true)
2019-12-03 09:41:49 +08:00
// 32 bits TX FIFO width
.fifo_width(0b11)
);
2019-12-03 09:41:49 +08:00
// Initialize RX/TX pipes thresholds
unsafe {
2019-12-10 09:46:25 +08:00
self.regs.rx_thres.write(1);
2019-12-03 09:41:49 +08:00
self.regs.tx_thres.write(1);
}
}
pub fn linear_addressing_mode(self) -> Flash<LinearAddressing> {
// Set manual start enable to auto mode.
// Assert the chip select.
self.regs.config.modify(|_, w| w
.man_start_en(false)
.pcs(false)
2019-12-05 06:56:38 +08:00
.manual_cs(false)
);
self.regs.lqspi_cfg.write(regs::LqspiCfg::zeroed()
// Quad I/O Fast Read
.inst_code(0xEB)
.mode_bits(0xFF)
.dummy_byte(0x2)
.mode_en(true)
// 2 devices
.two_mem(true)
2019-12-05 06:56:38 +08:00
.u_page(false)
// Linear Addressing Mode
2019-11-23 08:59:24 +08:00
.lq_mode(true)
);
2019-12-05 06:56:38 +08:00
self.regs.enable.write(
regs::Enable::zeroed()
.spi_en(true)
);
self.transition()
2019-11-23 08:59:24 +08:00
}
pub fn manual_mode(self, chip_index: usize) -> Flash<Manual> {
self.regs.config.modify(|_, w| w
.man_start_en(true)
.manual_cs(true)
2019-12-10 09:45:05 +08:00
.endian(true)
);
self.regs.lqspi_cfg.write(regs::LqspiCfg::zeroed()
.mode_bits(0xFF)
.dummy_byte(0x2)
.mode_en(true)
// 2 devices
.two_mem(true)
.sep_bus(true)
.u_page(chip_index != 0)
2019-12-05 06:56:38 +08:00
// Manual I/O mode
.lq_mode(false)
);
self.transition()
}
}
2019-11-23 08:59:24 +08:00
impl Flash<LinearAddressing> {
/// Stop linear addressing mode
pub fn stop(self) -> Flash<()> {
self.regs.enable.modify(|_, w| w.spi_en(false));
// De-assert chip select.
self.regs.config.modify(|_, w| w.pcs(true));
self.transition()
}
2019-11-23 08:59:24 +08:00
pub fn ptr<T>(&mut self) -> *mut T {
0xFC00_0000 as *mut _
}
pub fn size(&self) -> usize {
2 * (SINGLE_CAPACITY as usize)
}
}
impl Flash<Manual> {
pub fn stop(self) -> Flash<()> {
self.transition()
}
2019-12-14 08:55:17 +08:00
pub fn read_reg<R: SpiFlashRegister>(&mut self) -> R {
let args = Some(R::inst_code());
let transfer = self.transfer(args.into_iter(), R::transfer_len())
.bytes_transfer().skip(1);
R::new(transfer)
2019-12-12 08:02:09 +08:00
}
2019-12-14 08:55:17 +08:00
/// Read Identification
pub fn rdid(&mut self) -> core::iter::Skip<BytesTransfer<Transfer<core::option::IntoIter<u32>, u32>>> {
let args = Some((INST_RDID as u32) << 24);
self.transfer(args.into_iter(), 0x44)
2019-12-05 08:15:14 +08:00
.bytes_transfer().skip(1)
2019-12-05 06:56:38 +08:00
}
/// Read flash data
pub fn read(&mut self, offset: u32, len: usize
) -> core::iter::Take<core::iter::Skip<BytesTransfer<Transfer<core::option::IntoIter<u32>, u32>>>>
{
let args = Some(((INST_READ as u32) << 24) | (offset as u32));
self.transfer(args.into_iter(), len + 6)
.bytes_transfer().skip(6).take(len)
}
2019-12-14 08:56:49 +08:00
pub fn write_enabled<F: Fn(&mut Self) -> R, R>(&mut self, f: F) -> R {
// Write Enable
let args = Some(INST_WREN);
self.transfer(args.into_iter(), 1);
self.regs.gpio.modify(|_, w| w.wp_n(true));
while !self.read_reg::<SR1>().wel() {}
let result = f(self);
// Write Disable
let args = Some(INST_WRDI);
self.transfer(args.into_iter(), 1);
self.regs.gpio.modify(|_, w| w.wp_n(false));
while self.read_reg::<SR1>().wel() {}
result
}
pub fn transfer<'s: 't, 't, Args, W>(&'s mut self, args: Args, len: usize) -> Transfer<'t, Args, W>
2019-12-05 08:15:14 +08:00
where
Args: Iterator<Item = W>,
W: Into<SpiWord>,
2019-12-05 08:15:14 +08:00
{
Transfer::new(self, args, len)
2019-12-05 06:56:38 +08:00
}