zynq::flash: add more initialization

src/zynq/flash/mod.rs

@@ -160,6 +160,9 @@ impl Flash<()> {
     }
 
     fn configure(&mut self, divider: u32) {
+        self.disable_interrupts();
+        self.clear_rx_fifo();
+
         // for a baud_rate_div=1 LPBK_DLY_ADJ would be required
         let mut baud_rate_div = 2u32;
         while baud_rate_div < 7 && 2u32.pow(1 + baud_rate_div) < divider {
@@ -170,8 +173,33 @@ impl Flash<()> {
             .baud_rate_div(baud_rate_div as u8)
             .mode_sel(true)
             .leg_flsh(true)
+            // 32 bits TX FIFO width
             .fifo_width(0b11)
         );
+
+        // Initialize RX/TX pipes thresholds
+        unsafe {
+            self.regs.rx_thres.write(32);
+            self.regs.tx_thres.write(1);
+        }
+    }
+
+    fn disable_interrupts(&mut self) {
+        self.regs.intr_dis.write(
+            regs::IntrDis::zeroed()
+                .rx_overflow(true)
+                .tx_fifo_not_full(true)
+                .tx_fifo_full(true)
+                .rx_fifo_not_empty(true)
+                .rx_fifo_full(true)
+                .tx_fifo_underflow(true)
+        );
+    }
+
+    fn clear_rx_fifo(&self) {
+        while self.regs.intr_status.read().rx_fifo_not_empty() {
+            let _ = self.regs.rx_data.read();
+        }
     }
 
     pub fn linear_addressing_mode(self) -> Flash<LinearAddressing> {

src/zynq/flash/regs.rs

@@ -6,8 +6,8 @@ use crate::{register, register_bit, register_bits};
 pub struct RegisterBlock {
     pub config: Config,
     pub intr_status: IntrStatus,
-    pub intr_en: RW<u32>,
-    pub intr_dis: RW<u32>,
+    pub intr_en: IntrEn,
+    pub intr_dis: IntrDis,
     pub intr_mask: RO<u32>,
     pub enable: Enable,
     pub delay: RW<u32>,
@@ -85,6 +85,22 @@ register_bit!(intr_status, rx_fifo_not_empty, 4);
 register_bit!(intr_status, rx_fifo_full, 5);
 register_bit!(intr_status, tx_fifo_underflow, 6);
 
+register!(intr_en, IntrEn, WO, u32);
+register_bit!(intr_en, rx_overflow, 0);
+register_bit!(intr_en, tx_fifo_not_full, 2);
+register_bit!(intr_en, tx_fifo_full, 3);
+register_bit!(intr_en, rx_fifo_not_empty, 4);
+register_bit!(intr_en, rx_fifo_full, 5);
+register_bit!(intr_en, tx_fifo_underflow, 6);
+
+register!(intr_dis, IntrDis, WO, u32);
+register_bit!(intr_dis, rx_overflow, 0);
+register_bit!(intr_dis, tx_fifo_not_full, 2);
+register_bit!(intr_dis, tx_fifo_full, 3);
+register_bit!(intr_dis, rx_fifo_not_empty, 4);
+register_bit!(intr_dis, rx_fifo_full, 5);
+register_bit!(intr_dis, tx_fifo_underflow, 6);
+
 register!(enable, Enable, RW, u32);
 register_bit!(enable, spi_en, 0);