zynq::flash: add more setup

This commit is contained in:
Astro 2019-11-23 01:59:24 +01:00
parent 3180f1c3f7
commit a199a5dc7d
2 changed files with 82 additions and 7 deletions

View File

@ -6,7 +6,11 @@ use super::clocks::CpuClocks;
pub mod regs;
const FLASH_BAUD_RATE: u32 = 50_000_000;
/// Flash Interface Driver
///
/// For 2x Spansion S25FL128SAGMFIR01
pub struct Flash {
regs: &'static mut regs::RegisterBlock,
}
@ -19,7 +23,8 @@ impl Flash {
let regs = regs::RegisterBlock::qspi();
let mut flash = Flash { regs };
flash.configure();
flash.configure((FLASH_BAUD_RATE - 1 + clock) / FLASH_BAUD_RATE);
flash.setup_linear_addressing_mode();
flash
}
@ -39,7 +44,46 @@ impl Flash {
}
fn setup_signals() {
// TODO
slcr::RegisterBlock::unlocked(|slcr| {
// 1. Configure MIO pin 1 for chip select 0 output.
slcr.mio_pin_01.write(
slcr::MioPin01::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
.pullup(true)
);
// Configure MIO pins 2 through 5 for I/O.
slcr.mio_pin_02.write(
slcr::MioPin02::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_03.write(
slcr::MioPin03::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_04.write(
slcr::MioPin04::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
slcr.mio_pin_05.write(
slcr::MioPin05::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
// 3. Configure MIO pin 6 for serial clock 0 output.
slcr.mio_pin_06.write(
slcr::MioPin06::zeroed()
.l0_sel(true)
.io_type(slcr::IoBufferType::Lvcmos18)
);
// TODO: optional 2nd chip setup
});
}
fn reset() {
@ -55,13 +99,33 @@ impl Flash {
});
}
fn configure(&mut self) {
fn configure(&mut self, divider: u32) {
// for a baud_rate_div=1 LPBK_DLY_ADJ would be required
let mut baud_rate_div = 2u32;
while baud_rate_div < 7 && 2u32.pow(1 + baud_rate_div) < divider {
baud_rate_div += 1;
}
self.regs.config.modify(|_, w| w
.baud_rate_div(4 /* TODO */)
.baud_rate_div(baud_rate_div as u8)
.mode_sel(true)
.leg_flsh(true)
.endian(false)
.fifo_width(0b11)
);
}
fn setup_linear_addressing_mode(&mut self) {
self.regs.lqspi_cfg.modify(|_, w| w
.inst_code(0x3)
.u_page(false)
.sep_bus(false)
.two_mem(false)
.lq_mode(true)
);
}
pub fn ptr<T>(&mut self) -> *mut T {
0xFC00_0000 as *mut _
}
}

View File

@ -1,6 +1,6 @@
use volatile_register::{RO, WO, RW};
use crate::{register, register_bit, register_bits, register_bits_typed};
use crate::{register, register_bit, register_bits};
#[repr(C)]
pub struct RegisterBlock {
@ -24,7 +24,7 @@ pub struct RegisterBlock {
pub txd2: WO<u32>,
pub txd3: WO<u32>,
pub _unused3: [RO<u32>; 5],
pub lqspi_cfg: RW<u32>,
pub lqspi_cfg: LqspiCfg,
pub lqspi_sts: RW<u32>,
pub _unused4: [RO<u32>; 21],
pub mod_id: RW<u32>,
@ -49,7 +49,7 @@ register_bit!(config,
/// Clock phase
clk_ph, 2);
register_bits!(config,
/// divisor = 2 ** (1 + baud_rate_div)
/// divider = 2 ** (1 + baud_rate_div)
baud_rate_div, u8, 3, 5);
register_bits!(config,
/// Must be set to 0b11
@ -76,3 +76,14 @@ register_bit!(config,
register_bit!(config,
/// false: legacy SPI mode, true: Flash memory interface mode
leg_flsh, 31);
register!(lqspi_cfg, LqspiCfg, RW, u32);
register_bits!(lqspi_cfg, inst_code, u8, 0, 7);
register_bits!(lqspi_cfg, dummy_byte, u8, 8, 10);
register_bits!(lqspi_cfg, mode_bits, u8, 16, 23);
register_bit!(lqspi_cfg, mode_on, 24);
register_bit!(lqspi_cfg, mode_en, 25);
register_bit!(lqspi_cfg, u_page, 28);
register_bit!(lqspi_cfg, sep_bus, 29);
register_bit!(lqspi_cfg, two_mem, 30);
register_bit!(lqspi_cfg, lq_mode, 31);