web: set zola base url for m-labs-intl.com

This reverts commit c7cafe6e61.

artiq-board-generated/artiq-board.nix

@@ -1,97 +0,0 @@
-# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
-#  nix.sandboxPaths = ["/opt"];
-
-{ pkgs ? import <nixpkgs> {}
-, artiq-fast
-}:
-
-let
-  artiqSrc = import (artiq-fast + "/pkgs/artiq-src.nix") { fetchgit = pkgs.fetchgit; };
-  artiqpkgs = import artiq-fast { inherit pkgs; };
-  pythonEnv = pkgs.python3.withPackages (ps: with ps; [
-    jinja2 jsonschema numpy artiqpkgs.migen artiqpkgs.microscope artiqpkgs.misoc artiqpkgs.jesd204b artiqpkgs.artiq
-  ]);
-  fetchcargo = import (artiq-fast + "/fetchcargo.nix") {
-    inherit (pkgs) stdenv cacert git;
-    inherit (artiqpkgs) cargo cargo-vendor;
-  };
-  cargoDeps = fetchcargo rec {
-    name = "artiq-firmware-cargo-deps";
-    src = "${artiqSrc}/artiq/firmware";
-    sha256 = import (artiqSrc + "/artiq/firmware/cargosha256.nix");
-  };
-
-  cargoVendored = pkgs.stdenv.mkDerivation {
-    name = "artiq-firmware-cargo-vendored";
-    src = cargoDeps;
-    phases = [ "unpackPhase" "installPhase" ];
-    installPhase =
-      ''
-      mkdir -p $out/registry
-      cat << EOF > $out/config
-        [source.crates-io]
-        registry = "https://github.com/rust-lang/crates.io-index"
-        replace-with = "vendored-sources"
-
-        [source."https://github.com/m-labs/libfringe"]
-        git = "https://github.com/m-labs/libfringe"
-        rev = "b8a6d8f"
-        replace-with = "vendored-sources"
-
-        [source.vendored-sources]
-        directory = "$out/registry"
-      EOF
-      cp -R * $out/registry
-      '';
-  };
-in
-{ target
-, variant
-, src ? null
-, buildCommand ? "python -m artiq.gateware.targets.${target} -V ${variant}"
-, extraInstallCommands ? ""
-, ...
-}:
-let
-  name = "artiq-board-${target}-${variant}-${artiqpkgs.artiq.version}-xxx";
-  installPath = "${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}";
-in
-# Board packages are Python modules so that they get added to the ARTIQ Python
-# environment, and artiq_flash finds them.
-pkgs.stdenv.mkDerivation {
-  name = "artiq-board-${target}-${variant}-${artiqpkgs.artiq.version}";
-  inherit src;
-  phases = [ "buildPhase" "installPhase" ];
-  nativeBuildInputs = [
-    pkgs.gnumake pkgs.which pythonEnv
-    artiqpkgs.cargo
-    artiqpkgs.rustc
-    artiqpkgs.binutils-or1k
-    artiqpkgs.llvm-or1k
-  ];
-  buildInputs = [ pythonEnv ];
-  buildPhase =
-    ''
-    export CARGO_HOME=${cargoVendored}
-    export TARGET_AR=or1k-linux-ar
-    ${buildCommand} --no-compile-gateware --gateware-identifier-str=unprogrammed
-    '';
-  installPhase =
-    ''
-    mkdir -p $out
-    cp -ar artiq_${target}/${variant}/gateware $out
-
-    TARGET_DIR=$out/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}
-    mkdir -p $TARGET_DIR
-    if [ -e artiq_${target}/${variant}/software/bootloader/bootloader.bin ]
-    then cp artiq_${target}/${variant}/software/bootloader/bootloader.bin $TARGET_DIR
-    fi
-    if [ -e artiq_${target}/${variant}/software/runtime ]
-    then cp artiq_${target}/${variant}/software/runtime/runtime.{elf,fbi} $TARGET_DIR
-    else cp artiq_${target}/${variant}/software/satman/satman.{elf,fbi} $TARGET_DIR
-    fi
-    ${extraInstallCommands}
-    '';
-  # don't mangle ELF files as they are not for NixOS
-  dontFixup = true;
-}

artiq-board-generated/default.nix

@@ -1,54 +0,0 @@
-{ pkgs ? import <nixpkgs> {}
-, artiq-fast ? <artiq-fast>
-}:
-
-let
-  sinaraSystemsSrc = <sinaraSystemsSrc>;
-  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
-    ''
-    mkdir $out
-    cp ${./artiq-board.nix} $out/artiq-board.nix
-    cp ${../artiq-full/artiq-targets.nix} $out/artiq-targets.nix
-    cp -a ${artiq-fast} $out/fast
-
-    REV=`git --git-dir ${sinaraSystemsSrc}/.git rev-parse HEAD`
-    echo -n $REV > $out/sinara-rev.txt
-    SINARA_SRC_CLEAN=`mktemp -d`
-    cp -a ${sinaraSystemsSrc}/. $SINARA_SRC_CLEAN
-    chmod -R 755 $SINARA_SRC_CLEAN/.git
-    chmod 755 $SINARA_SRC_CLEAN
-    rm -rf $SINARA_SRC_CLEAN/.git
-    HASH=`nix-hash --type sha256 --base32 $SINARA_SRC_CLEAN`
-    echo -n $HASH > $out/sinara-hash.txt
-
-    cat > $out/default.nix << EOF
-    { pkgs ? import <nixpkgs> {}
-    }:
-
-    let
-      sinaraSystemsSrc = pkgs.fetchgit {
-        url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
-        rev = "$REV";
-        sha256 = "$HASH";
-      };
-      artiq-fast = import ./fast { inherit pkgs; };
-      artiq-board = import ./artiq-board.nix {
-        inherit pkgs;
-        artiq-fast = ./fast;
-      };
-    in
-      builtins.mapAttrs (_: conf: pkgs.lib.hydraJob (artiq-board conf)) (
-        import ./artiq-targets.nix {
-          inherit pkgs sinaraSystemsSrc;
-          artiqVersion = artiq-fast.artiq.version;
-        }
-      )
-    EOF
-    '';
-  artiq-board-generated = import generatedNix {
-    inherit pkgs;
-  };
-in
-artiq-board-generated // {
-  generated-nix = pkgs.lib.hydraJob generatedNix;
-}

artiq-fast.nix

@@ -1,111 +0,0 @@
-let
-  pkgs = import <nixpkgs> {};
-  artiqSrc = <artiqSrc>;
-  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
-    # keep in sync with artiq-fast/pkgs/artiq-version.nix
-    ''
-    cp --no-preserve=mode,ownership -R ${./artiq-fast} $out
-    REV=`git --git-dir ${artiqSrc}/.git rev-parse HEAD`
-    MAJOR_VERSION=`cat ${artiqSrc}/MAJOR_VERSION`
-    if [ -e ${artiqSrc}/BETA ]; then
-      SUFFIX=".beta"
-    else
-      SUFFIX=""
-    fi
-    COMMIT_COUNT=`git --git-dir ${artiqSrc}/.git rev-list --count HEAD`
-    TIMESTAMP=`git --git-dir ${artiqSrc}/.git log -1 --format=%ct`
-    ARTIQ_SRC_CLEAN=`mktemp -d`
-    cp -a ${artiqSrc}/. $ARTIQ_SRC_CLEAN
-    chmod -R 755 $ARTIQ_SRC_CLEAN/.git
-    chmod 755 $ARTIQ_SRC_CLEAN
-    rm -rf $ARTIQ_SRC_CLEAN/.git
-    HASH=`nix-hash --type sha256 --base32 $ARTIQ_SRC_CLEAN`
-    cat > $out/pkgs/artiq-src.nix << EOF
-    { fetchgit }:
-    fetchgit {
-      url = "git://github.com/m-labs/artiq.git";
-      rev = "$REV";
-      sha256 = "$HASH";
-    }
-    EOF
-    echo "{ stdenv, git, fetchgit }: \"$MAJOR_VERSION.$COMMIT_COUNT.`cut -c1-8 <<< $REV`$SUFFIX\"" > $out/pkgs/artiq-version.nix
-    echo "{ stdenv, git, fetchgit }: \"$TIMESTAMP\"" > $out/pkgs/artiq-timestamp.nix
-    '';
-  artiqpkgs = import "${generatedNix}/default.nix" { inherit pkgs; };
-  artiqVersion = import "${generatedNix}/pkgs/artiq-version.nix" (with pkgs; { inherit stdenv fetchgit git; });
-  windowsRunner = overrides:
-    import "${generatedNix}/windows/run-test.nix" ({
-      inherit pkgs artiqpkgs;
-    } // overrides);
-  jobs = (builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) artiqpkgs);
-in
-  jobs // {
-    generated-nix = pkgs.lib.hydraJob generatedNix;  # used by artiq-full
-    artiq-fast = pkgs.releaseTools.channel {
-      name = "artiq-fast";
-      src = generatedNix;
-      constituents = builtins.attrValues jobs;
-    };
-
-    windows-no-hardware-tests = pkgs.stdenv.mkDerivation {
-      name = "windows-no-hardware-tests";
-      phases = [ "buildPhase" ];
-      buildPhase = ''
-        ${windowsRunner { testCommand = "python -m unittest discover -v sipyco.test && python -m unittest discover -v artiq.test"; }}/bin/wfvm-run-windows-tests
-        touch $out
-      '';
-    };
-
-    extended-tests = pkgs.stdenv.mkDerivation {
-      name = "extended-tests";
-
-      # requires patched Nix
-      __networked = true;
-
-      buildInputs = [
-        (pkgs.python3.withPackages(ps: [ ps.paramiko artiqpkgs.artiq artiqpkgs.artiq-board-kc705-nist_clock ]))
-        artiqpkgs.binutils-or1k
-        artiqpkgs.openocd
-        pkgs.openssh
-      ];
-      phases = [ "buildPhase" ];
-      buildPhase =
-      ''
-      export HOME=`mktemp -d`
-      mkdir $HOME/.ssh
-      cp /opt/hydra_id_rsa $HOME/.ssh/id_rsa
-      cp /opt/hydra_id_rsa.pub $HOME/.ssh/id_rsa.pub
-      echo "rpi-1 ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIMc7waNkP2HjL5Eo94evoxJhC8CbYj4i2n1THe5TPIR3" > $HOME/.ssh/known_hosts
-      chmod 600 $HOME/.ssh/id_rsa
-      LOCKCTL=$(mktemp -d)
-      mkfifo $LOCKCTL/lockctl
-
-      cat $LOCKCTL/lockctl | ${pkgs.openssh}/bin/ssh \
-        -i $HOME/.ssh/id_rsa \
-        -o UserKnownHostsFile=$HOME/.ssh/known_hosts \
-        sb@rpi-1 \
-        'mkdir -p /tmp/board_lock && flock /tmp/board_lock/kc705-1 -c "echo Ok; cat"' \
-      | (
-        # End remote flock via FIFO
-        atexit_unlock() {
-          echo > $LOCKCTL/lockctl
-        }
-        trap atexit_unlock EXIT
-
-        # Read "Ok" line when remote successfully locked
-        read LOCK_OK
-
-        artiq_flash -t kc705 -H rpi-1
-        sleep 15
-
-        export ARTIQ_ROOT=`python -c "import artiq; print(artiq.__path__[0])"`/examples/kc705_nist_clock
-        export ARTIQ_LOW_LATENCY=1
-        python -m unittest discover -v artiq.test.coredevice
-
-        ${windowsRunner { testCommand = "set ARTIQ_ROOT=%cd%\\Anaconda3\\envs\\artiq-env\\Lib\\site-packages\\artiq\\examples\\kc705_nist_clock&& python -m unittest discover -v artiq.test.coredevice"; }}/bin/wfvm-run-windows-tests
-      )
-
-      touch $out
-      '';
-    };
-  }

artiq-fast/artiq-board.nix

@@ -1,102 +0,0 @@
-# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
-#  nix.sandboxPaths = ["/opt"];
-
-{ pkgs
-, vivado ? import ./vivado.nix { inherit pkgs; }
-}:
-
-let
-  artiqSrc = import ./pkgs/artiq-src.nix { fetchgit = pkgs.fetchgit; };
-  artiqpkgs = import ./default.nix { inherit pkgs; };
-  fetchcargo = import ./fetchcargo.nix {
-    inherit (pkgs) stdenv cacert git;
-    inherit (artiqpkgs) cargo cargo-vendor;
-  };
-  cargoDeps = fetchcargo rec {
-    name = "artiq-firmware-cargo-deps";
-    src = "${artiqSrc}/artiq/firmware";
-    sha256 = (import "${artiqSrc}/artiq/firmware/cargosha256.nix");
-  };
-
-  cargoVendored = pkgs.stdenv.mkDerivation {
-    name = "artiq-firmware-cargo-vendored";
-    src = cargoDeps;
-    phases = [ "unpackPhase" "installPhase" ];
-    installPhase =
-      ''
-      mkdir -p $out/registry
-      cat << EOF > $out/config
-        [source.crates-io]
-        registry = "https://github.com/rust-lang/crates.io-index"
-        replace-with = "vendored-sources"
-
-        [source."https://github.com/m-labs/libfringe"]
-        git = "https://github.com/m-labs/libfringe"
-        rev = "b8a6d8f"
-        replace-with = "vendored-sources"
-
-        [source.vendored-sources]
-        directory = "$out/registry"
-      EOF
-      cp -R * $out/registry
-      '';
-  };
-
-in
-{ target
-, variant
-, src ? null
-, buildCommand ? "python -m artiq.gateware.targets.${target} -V ${variant}"
-, extraInstallCommands ? ""
-, ... }:
-
-# Board packages are Python modules so that they get added to the ARTIQ Python
-# environment, and artiq_flash finds them.
-pkgs.python3Packages.toPythonModule (pkgs.stdenv.mkDerivation rec {
-  name = "artiq-board-${target}-${variant}-${version}";
-  version = import ./pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
-  inherit src;
-  phases = [ "buildPhase" "installCheckPhase" "installPhase" "checkPhase" ];
-  nativeBuildInputs = [
-    vivado
-    pkgs.gnumake
-    artiqpkgs.cargo
-    artiqpkgs.rustc
-    artiqpkgs.binutils-or1k
-    artiqpkgs.llvm-or1k
-  ];
-  buildInputs = [ (pkgs.python3.withPackages(ps: with ps; [ jinja2 numpy artiqpkgs.migen artiqpkgs.microscope artiqpkgs.misoc artiqpkgs.jesd204b artiqpkgs.artiq ])) ];
-  buildPhase = 
-    ''
-    export CARGO_HOME=${cargoVendored}
-    export TARGET_AR=or1k-linux-ar
-    ${buildCommand}
-    '';
-  # temporarily disabled because there is currently always at least one Kasli bitstream
-  # that fails timing and blocks the conda channel.
-  doCheck = false;
-  checkPhase = ''
-    # Search for PCREs in the Vivado output to check for errors
-    check_log() {
-      grep -Pe "$1" artiq_${target}/${variant}/gateware/vivado.log && exit 1 || true
-    }
-    check_log "\d+ constraint not met\."
-    check_log "Timing constraints are not met\."
-    '';
-  installPhase =
-    ''
-    TARGET_DIR=$out/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}
-    mkdir -p $TARGET_DIR
-    cp artiq_${target}/${variant}/gateware/top.bit $TARGET_DIR
-    if [ -e artiq_${target}/${variant}/software/bootloader/bootloader.bin ]
-    then cp artiq_${target}/${variant}/software/bootloader/bootloader.bin $TARGET_DIR
-    fi
-    if [ -e artiq_${target}/${variant}/software/runtime ]
-    then cp artiq_${target}/${variant}/software/runtime/runtime.{elf,fbi} $TARGET_DIR
-    else cp artiq_${target}/${variant}/software/satman/satman.{elf,fbi} $TARGET_DIR
-    fi
-    ${extraInstallCommands}
-    '';
-  # don't mangle ELF files as they are not for NixOS
-  dontFixup = true;
-})

artiq-fast/conda-windows/binutils-hack-libiconv.patch

@@ -1,11 +0,0 @@
---- a/intl/relocatable.c	2018-02-28 18:19:46.318224392 +0000
-+++ b/intl/relocatable.c	2018-02-28 18:19:37.614224749 +0000
-@@ -145,7 +145,7 @@
-   libcharset_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
- #endif
- #if DEPENDS_ON_LIBICONV && HAVE_ICONV && _LIBICONV_VERSION >= 0x0109
--  libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
-+  // libiconv_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);
- #endif
- #if DEPENDS_ON_LIBINTL && ENABLE_NLS && defined libintl_set_relocation_prefix
-   libintl_set_relocation_prefix (orig_prefix_arg, curr_prefix_arg);

artiq-fast/conda-windows/binutils-recipe/bld.bat

@@ -1,21 +0,0 @@
-set MSYS=C:\MSYS64
-set TRIPLE=x86_64-w64-mingw32
-set PATH=%MSYS%\usr\bin;%MSYS%\mingw64\bin;%PATH%
-
-mkdir build
-cd build
-set CFLAGS=-I%PREFIX:\=/%/Library/include/
-set LDFLAGS=-L%PREFIX:\=/%/Library/lib/
-sh ../configure --build=%TRIPLE% ^
-  --prefix="%PREFIX:\=/%/Library" ^
-  --target=##TARGET##
-if errorlevel 1 exit 1
-
-make -j4
-if errorlevel 1 exit 1
-
-make install
-if errorlevel 1 exit 1
-
-rem this is a copy of prefixed executables
-rmdir /S /Q %PREFIX%\Library\##TARGET##

artiq-fast/conda-windows/binutils-recipe/meta.yaml

@@ -1,17 +0,0 @@
-package:
-  name: binutils-##TARGET##
-  version: ##VERSION##
-
-source:
-  url: ../src.tar.bz2
-
-requirements:
-  build:
-    - libiconv
-  run:
-    - libiconv
-
-about:
-  home: https://www.gnu.org/software/binutils/
-  license: GPL
-  summary: 'A set of programming tools for creating and managing binary programs, object files, libraries, profile data, and assembly source code.'

artiq-fast/conda-windows/binutils.nix

@@ -1,54 +0,0 @@
-{ pkgs, version, src, target }:
-
-let
-  wfvm = import ../wfvm.nix { inherit pkgs; };
-  libiconv-filename = "libiconv-1.15-h1df5818_7.tar.bz2";
-  libiconv = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/libiconv/1.15/download/win-64/${libiconv-filename}";
-    sha256 = "0p431madykrjmi9sbl2sy9kzb0l3vhgs677i8q7cx8g210ab5g52";
-  };
-  vc14-filename = "vc-14.1-h0510ff6_4.tar.bz2";
-  vc14 = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/vc/14.1/download/win-64/${vc14-filename}";
-    sha256 = "0nsyxph667x8ky1nybakpnk816dkrzbf1684jd7pp6wm5x73p34v";
-  };
-  vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
-  vs2015_runtime = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${vs2015_runtime-filename}";
-    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
-  };
-  build = wfvm.utils.wfvm-run {
-    name = "build-binutils";
-    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msys2 (msys2-packages (import ./msys_packages.nix { inherit pkgs; } )) ]; };
-    script = ''
-      # Create a fake channel to work around another pile of bugs and cretinous design decisions from conda.
-      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
-      ln -s ${libiconv} ${libiconv-filename}
-      ${wfvm.utils.win-put}/bin/win-put ${libiconv-filename} ./fake-channel/win-64
-      ln -s ${vc14} ${vc14-filename}
-      ${wfvm.utils.win-put}/bin/win-put ${vc14-filename} ./fake-channel/win-64
-      ln -s ${vs2015_runtime} ${vs2015_runtime-filename}
-      ${wfvm.utils.win-put}/bin/win-put ${vs2015_runtime-filename} ./fake-channel/win-64
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
-
-      cp --no-preserve=mode,ownership -R ${./binutils-recipe} binutils
-      sed -i s/##TARGET##/${target}/g binutils/*
-      sed -i s/##VERSION##/${version}/g binutils/*
-      ${wfvm.utils.win-put}/bin/win-put binutils .
-      tar xjf ${src}
-      patch -d binutils-${version} -p1 < ${./binutils-hack-libiconv.patch}
-      tar cjf src.tar.bz2 binutils-${version}
-      ${wfvm.utils.win-put}/bin/win-put src.tar.bz2 .
-
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels binutils"
-
-      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/binutils-${target}-${version}-0.tar.bz2"
-    '';
-  };
-in
-  pkgs.runCommand "conda-windows-binutils-${target}" { buildInputs = [ build ]; } ''
-    wfvm-run-build-binutils
-    mkdir -p $out/win-64 $out/nix-support
-    cp binutils-*.tar.bz2 $out/win-64
-    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
-    ''

artiq-fast/conda-windows/llvm-or1k.nix

@@ -1,83 +0,0 @@
-{ pkgs, version, src }:
-
-let
-  wfvm = import ../wfvm.nix { inherit pkgs; };
-  conda-vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
-  conda-vs2015_runtime = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${conda-vs2015_runtime-filename}";
-    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
-  };
-  conda-cmake-filename = "cmake-3.17.2-h33f27b4_0.tar.bz2";
-  conda-cmake = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/cmake/3.17.2/download/win-64/${conda-cmake-filename}";
-    sha256 = "0lg782pj2i9h20rwfkwwskis038r98b3z4c9j1a6ih95rc6m2acn";
-  };
-  build = wfvm.utils.wfvm-run {
-    name = "build-llvm-or1k";
-    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msvc msvc-ide-unbreak ]; };
-    script = ''
-      # Create a fake channel so that the conda garbage doesn't complain about not finding the packages it just installed.
-      ln -s ${conda-vs2015_runtime} ${conda-vs2015_runtime-filename}
-      ln -s ${conda-cmake} ${conda-cmake-filename}
-      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
-      ${wfvm.utils.win-put}/bin/win-put ${conda-vs2015_runtime-filename} ./fake-channel/win-64
-      ${wfvm.utils.win-put}/bin/win-put ${conda-cmake-filename} ./fake-channel/win-64
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
-
-      cat > meta.yaml << EOF
-      package:
-        name: llvm-or1k
-        version: ${version}
-
-      source:
-        url: ../src.tar
-
-      requirements:
-        build:
-          - cmake
-      EOF
-
-      cat > bld.bat << EOF
-      set BUILD_TYPE=Release
-      set CMAKE_GENERATOR=Visual Studio 15 2017 Win64
-
-      mkdir build
-      cd build
-      cmake .. -G "%CMAKE_GENERATOR%" ^
-        -Thost=x64 ^
-        -DCMAKE_BUILD_TYPE="%BUILD_TYPE%" ^
-        -DCMAKE_INSTALL_PREFIX="%LIBRARY_PREFIX%" ^
-        -DLLVM_BUILD_LLVM_DYLIB=ON ^
-        -DLLVM_TARGETS_TO_BUILD=X86;ARM ^
-        -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K ^
-        -DLLVM_ENABLE_ASSERTIONS=OFF ^
-        -DLLVM_INSTALL_UTILS=ON ^
-        -DLLVM_INCLUDE_TESTS=OFF ^
-        -DLLVM_INCLUDE_DOCS=OFF ^
-        -DLLVM_INCLUDE_EXAMPLES=OFF
-      if errorlevel 1 exit 1
-      cmake --build . --config "%BUILD_TYPE%" --parallel 4
-      if errorlevel 1 exit 1
-      cmake --build . --config "%BUILD_TYPE%" --target install
-      if errorlevel 1 exit 1
-      EOF
-
-      ${wfvm.utils.win-exec}/bin/win-exec "mkdir llvm-or1k"
-      ${wfvm.utils.win-put}/bin/win-put meta.yaml llvm-or1k
-      ${wfvm.utils.win-put}/bin/win-put bld.bat llvm-or1k
-      ln -s ${src} src
-      tar chf src.tar src
-      ${wfvm.utils.win-put}/bin/win-put src.tar .
-
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels llvm-or1k"
-
-      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/llvm-or1k-${version}-0.tar.bz2"
-    '';
-  };
-in
-  pkgs.runCommand "conda-windows-llvm-or1k" { buildInputs = [ build ]; } ''
-    wfvm-run-build-llvm-or1k
-    mkdir -p $out/win-64 $out/nix-support
-    cp llvm-or1k-*.tar.bz2 $out/win-64
-    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
-    ''

artiq-fast/conda-windows/llvmlite-artiq.nix

@@ -1,74 +0,0 @@
-{ pkgs, conda-windows-llvm-or1k, version, src }:
-
-let
-  wfvm = import ../wfvm.nix { inherit pkgs; };
-  conda-vs2015_runtime-filename = "vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
-  conda-vs2015_runtime = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/vs2015_runtime/14.16.27012/download/win-64/${conda-vs2015_runtime-filename}";
-    sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
-  };
-  conda-cmake-filename = "cmake-3.17.2-h33f27b4_0.tar.bz2";
-  conda-cmake = pkgs.fetchurl {
-    url = "https://anaconda.org/anaconda/cmake/3.17.2/download/win-64/${conda-cmake-filename}";
-    sha256 = "0lg782pj2i9h20rwfkwwskis038r98b3z4c9j1a6ih95rc6m2acn";
-  };
-  build = wfvm.utils.wfvm-run {
-    name = "build-llvmlite-artiq";
-    image = wfvm.makeWindowsImage { installCommands = with wfvm.layers; [ anaconda3 msvc msvc-ide-unbreak ]; };
-    script = ''
-      ln -s ${conda-vs2015_runtime} ${conda-vs2015_runtime-filename}
-      ln -s ${conda-cmake} ${conda-cmake-filename}
-      ${wfvm.utils.win-exec}/bin/win-exec "mkdir fake-channel && mkdir fake-channel\win-64"
-      ${wfvm.utils.win-put}/bin/win-put ${conda-vs2015_runtime-filename} ./fake-channel/win-64
-      ${wfvm.utils.win-put}/bin/win-put ${conda-cmake-filename} ./fake-channel/win-64
-      ${wfvm.utils.win-put}/bin/win-put ${conda-windows-llvm-or1k}/win-64/llvm-or1k-*.tar.bz2 ./fake-channel/win-64
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
-
-      cat > meta.yaml << EOF
-      package:
-        name: llvmlite-artiq
-        version: ${version}
-
-      source:
-        url: ../src.tar
-
-      requirements:
-        build:
-          - cmake
-          - llvm-or1k
-      EOF
-
-      cat > bld.bat << EOF
-      @rem Let CMake know about the LLVM install path, for find_package()
-      set CMAKE_PREFIX_PATH=%LIBRARY_PREFIX%
-
-      @rem Ensure there are no build leftovers (CMake can complain)
-      if exist ffi\build rmdir /S /Q ffi\build
-
-      python setup.py install \
-        --prefix=%PREFIX% \
-        --single-version-externally-managed \
-        --record=record.txt \
-        --no-compile
-      if errorlevel 1 exit 1
-      EOF
-
-      ${wfvm.utils.win-exec}/bin/win-exec "mkdir llvmlite-artiq"
-      ${wfvm.utils.win-put}/bin/win-put meta.yaml llvmlite-artiq
-      ${wfvm.utils.win-put}/bin/win-put bld.bat llvmlite-artiq
-      ln -s ${src} src
-      tar chf src.tar src
-      ${wfvm.utils.win-put}/bin/win-put src.tar .
-
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda build --no-anaconda-upload --no-test -c file:///C:/users/wfvm/fake-channel --override-channels llvmlite-artiq"
-
-      ${wfvm.utils.win-get}/bin/win-get "Anaconda3/conda-bld/win-64/llvmlite-artiq-${version}-0.tar.bz2"
-    '';
-  };
-in
-  pkgs.runCommand "conda-windows-llvmlite-artiq" { buildInputs = [ build ]; } ''
-    wfvm-run-build-llvmlite-artiq
-    mkdir -p $out/win-64 $out/nix-support
-    cp llvmlite-artiq-*.tar.bz2 $out/win-64
-    echo file conda $out/win-64/*.tar.bz2 >> $out/nix-support/hydra-build-products
-    ''

artiq-fast/conda-windows/msys_packages.nix

@@ -1,177 +0,0 @@
-{ pkgs } : [
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-libiconv-1.16-1-any.pkg.tar.xz";
-  sha256 = "0w8jkjr5gwybw9469216vs6vpibkq36wx47bbl4r0smi4wvh2yxk";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-zlib-1.2.11-7-any.pkg.tar.xz";
-  sha256 = "1hnfagn5m0ys4f8349d8dpbqvh9p900jjn83r7fi1az6i9dz1v0x";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-binutils-2.34-3-any.pkg.tar.zst";
-  sha256 = "0ahlwbg5ir89nbra407yrzsplib4cia9m0dggcqjw1i4bxi7ypj1";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-headers-git-8.0.0.5905.066f1b3c-1-any.pkg.tar.zst";
-  sha256 = "0sskg0vvgggs932i09ipm5rrllv6vdf1ai3d3fvbi5pxis1xc9g0";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-crt-git-8.0.0.5905.066f1b3c-1-any.pkg.tar.zst";
-  sha256 = "1sjizkvknivbjs962fqxcmjkgnrvhd1frq96cfj2fyzk5cz7kfx0";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-isl-0.22.1-1-any.pkg.tar.xz";
-  sha256 = "1nj7sj3hgxhziqs1l7k42ginl10w7iy1b753mwvqiczfs322hb90";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gmp-6.2.0-1-any.pkg.tar.xz";
-  sha256 = "1l4qdxr8xp6xyxabwcf9b876db3rhj4v54zsvb4v1kwm3jrs7caw";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-mpfr-4.0.2-2-any.pkg.tar.xz";
-  sha256 = "0hriryx58bkk3sihnhd4i6966civ3hq8i68rnc9kjivk47wi49rj";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-mpc-1.1.0-1-any.pkg.tar.xz";
-  sha256 = "0x1kg178l6mf9ivdy71bci36h2a37vypg4jk3k7y31ks6i79zifp";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-libwinpthread-git-8.0.0.5906.c9a21571-1-any.pkg.tar.zst";
-  sha256 = "16aqi04drn252cxdh1brpbi4syn4bfjb84qk4xqbnffnpxpvv5ph";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gcc-libs-10.1.0-3-any.pkg.tar.zst";
-  sha256 = "0bmkrb9x7z0azzxl3z08r6chcl0pbnaijar7cdjxb2nh7fbbdzzp";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-windows-default-manifest-6.4-3-any.pkg.tar.xz";
-  sha256 = "1kwxb3q2slgsg17lkd0dc9fjks5f205dgm79fj0xq0zmrsns83kc";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-winpthreads-git-8.0.0.5906.c9a21571-1-any.pkg.tar.zst";
-  sha256 = "17nq8gs1nnxgligdrp5n6h4pnk46xw0yhjk2hn6y12vvpn7iv05v";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-zstd-1.4.5-1-any.pkg.tar.zst";
-  sha256 = "1jfxzajmbvlap1c0v17s8dzwdx0fi8kyrkmgr6gw1snisgllifyh";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/mingw/x86_64/mingw-w64-x86_64-gcc-10.1.0-3-any.pkg.tar.zst";
-  sha256 = "1gkcc6hh20glx4b96ldsnd70r8dbp460bxfznm9z2rwgr0mxb374";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/make-4.3-1-x86_64.pkg.tar.xz";
-  sha256 = "0bmgggw56gkx7dcd8simpi2lhgz98limikx8wm0cb8cn7awi9w82";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/m4-1.4.18-2-x86_64.pkg.tar.xz";
-  sha256 = "05x7myqwwxk3vfqmliwk5pfn0w04fnjh1sqafsynpb9hx0c563ji";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/diffutils-3.7-1-x86_64.pkg.tar.xz";
-  sha256 = "11qdxn4mr8a96palhp5jkam904fh77bsw5v7mslhnzag4cg3kybx";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/autoconf-2.69-5-any.pkg.tar.xz";
-  sha256 = "1fxvgbjnmmb7dvmssfxkiw151dfd1wzj04hf45zklmzs4h2kkwda";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.6-1.6.3-2-any.pkg.tar.xz";
-  sha256 = "0if4wrr1vm2f1zjjh6dpln97xc1l1052bcawzmndwfh561cfxqb6";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.7-1.7.9-2-any.pkg.tar.xz";
-  sha256 = "1mjhp1k4c0xm8hfm3yckqvfb4ablzgg8a87l7wxaq1mmmskjmhpq";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.8-1.8.5-3-any.pkg.tar.xz";
-  sha256 = "046bzr44ss0lglx9lzccj9li74arz632hyvz6l9fcp98dndr3qjk";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.9-1.9.6-2-any.pkg.tar.xz";
-  sha256 = "0bh0dldmrd46xhix5358nj9sgf298n4ap0y8dsl6rvjsb5c0l5hd";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.10-1.10.3-3-any.pkg.tar.xz";
-  sha256 = "0p26lkx5n1mmmw1y98bgwzbxfxkfa18fqxvkgsm60fznjig4dq61";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.11-1.11.6-3-any.pkg.tar.xz";
-  sha256 = "1cjkav2bskf9rdm8g3hsl2l7wz1lx8dfigwqib0xhm7n8i8gc560";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.12-1.12.6-3-any.pkg.tar.xz";
-  sha256 = "1c0h2lngfjjfvw0jkrfah1fs25k0vdm80hlxfjs912almh2yg5gv";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.13-1.13.4-4-any.pkg.tar.xz";
-  sha256 = "0mczn8hanqn3hxr104klb832b4cnzn44bbn7lvqfsbvvjpklv9ld";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.14-1.14.1-3-any.pkg.tar.xz";
-  sha256 = "04gjyfszyphxy7qc1rr8378ms9hql0sy8a1gyj0mvpbmgb0phgkp";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.15-1.15.1-1-any.pkg.tar.xz";
-  sha256 = "00n1f3c6fwznpm1f6xmj30q41ixw5vdg52yg48yvr4jswb78qf8q";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake1.16-1.16.1-1-any.pkg.tar.xz";
-  sha256 = "1ds8rpagrlkzi28n5rh0jcibbic49xssl2hz6sy41my0vd8a3z9y";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/automake-wrapper-11-1-any.pkg.tar.xz";
-  sha256 = "1dzymv59wri7qqmgmy5xfkq6zvfcb0znwspc149a04d0bhxs75gw";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/libltdl-2.4.6-9-x86_64.pkg.tar.xz";
-  sha256 = "0j0xazjpj28dib9vjn3paibhry77k903rzvbkdn6gnl20smj18g2";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/tar-1.32-1-x86_64.pkg.tar.xz";
-  sha256 = "0ynz2qwzbcmixcxddp05q2wc7iqli6svzkrjss9izrpmbkv5ifa5";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/libtool-2.4.6-9-x86_64.pkg.tar.xz";
-  sha256 = "0mrnkayrhmrgq446nyysvj3kadqm1xhyl97qqv6hrq57lhkcry2p";
-})
-
-(pkgs.fetchurl {
-  url = "http://repo.msys2.org/msys/x86_64/texinfo-6.7-1-x86_64.pkg.tar.xz";
-  sha256 = "0c50809yg9g95m8yib867q8m28sjabqppz2qbzh3gr83z55kknnw";
-})
-]

artiq-fast/conda-windows/redistribute.nix

@@ -1,13 +0,0 @@
-{ pkgs, name, filename, baseurl, sha256 }:
-
-let
-  download = pkgs.fetchurl {
-  	url = "${baseurl}${filename}";
-  	inherit sha256;
-  };
-in
-  pkgs.runCommand "conda-windows-${name}" { } ''
-    mkdir -p $out/win-64 $out/nix-support
-    ln -s ${download} $out/win-64/${filename}
-    echo file conda $out/win-64/${filename} >> $out/nix-support/hydra-build-products
-    ''

artiq-fast/conda/artiq.nix

@@ -1,38 +0,0 @@
-{ pkgs }:
-
-let
-  version = import ../pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
-  fakeCondaSource = import ./fake-source.nix { inherit pkgs; } {
-    name = "artiq";
-    inherit version;
-    src = import ../pkgs/artiq-src.nix { fetchgit = pkgs.fetchgit; };
-    dependencies = [
-      "llvmlite-artiq"
-      "binutils-or1k-linux"
-      "pythonparser"
-      "scipy"
-      "numpy"
-      "prettytable"
-      "h5py"
-      "python-dateutil"
-      "pyqt"
-      (if (pkgs.lib.strings.versionAtLeast version "6.0") then "qasync" else "quamash")
-      "pyqtgraph"
-      "pygit2"
-      "python-levenshtein"
-      "sipyco"
-    ];
-    extraYaml =
-    ''
-    about:
-      home: https://m-labs.hk/artiq
-      license: LGPL
-      summary: 'A leading-edge control system for quantum information experiments'
-    '';
-  };
-  conda-artiq = import ./build.nix { inherit pkgs; } {
-    name = "conda-artiq";
-    src = fakeCondaSource;
-  };
-in
-  conda-artiq

artiq-fast/conda/binutils.nix

@@ -1,45 +0,0 @@
-{ pkgs, version, src, target }:
-
-let
-  fake-src = pkgs.runCommand "conda-fake-source-binutils-${target}" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: binutils-${target}
-      version: ${version}
-
-    source:
-      url: ${src}
-
-    # Note: libiconv is also a build dependency, but the conda garbage won't find it
-    # if installed from a file (even if it shows up in conda list), as is the case 
-    # when using this script.
-    requirements:
-      run:
-        - libiconv
-
-    EOF
-
-    cat << EOF > $out/fake-conda/build.sh
-    #!/bin/bash
-    set -e
-
-    mkdir build
-    cd build
-    ../configure --target=${target} --prefix=\$PREFIX
-    make
-    make install
-
-    # this is a copy of prefixed executables
-    rm -rf $PREFIX/${target}
-
-    EOF
-    chmod 755 $out/fake-conda/build.sh
-    '';
-in
-  import ./build.nix { inherit pkgs; } {
-    name = "conda-binutils-${target}";
-    src = fake-src;
-  }

artiq-fast/conda/bscan-spi-bitstreams.nix

@@ -1,36 +0,0 @@
-{ pkgs, bscan_spi_bitstreams }:
-
-let
-  src = pkgs.runCommand "conda-fake-source-bscan_spi_bitstreams" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
-    cp --no-preserve=mode,ownership -R ${bscan_spi_bitstreams} workaround-conda
-    pushd workaround-conda
-    tar cf $out/src.tar .
-    popd
-    rm -rf workaround-conda
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: bscan-spi-bitstreams
-      version: "0.10.0"
-
-    source:
-      url: ../src.tar
-
-    build:
-      noarch: generic
-      binary_relocation: false
-      script:
-        - "mkdir -p \$PREFIX/share/bscan-spi-bitstreams"
-        - "cp *.bit \$PREFIX/share/bscan-spi-bitstreams"
-
-    EOF
-    '';
-in
-  import ./build.nix { inherit pkgs; } {
-    name = "conda-bscan_spi_bitstreams";
-    inherit src;
-  }

artiq-fast/conda/build.nix

@@ -1,30 +0,0 @@
-# We need to pass the whole source to conda for the git variables to work.
-# recipe must be a string pointing to a path within the source.
-
-{ pkgs }:
-{ name ? null
-, src
-, pname ? null
-, version ? null
-, recipe ? "fake-conda"
-}:
-
-# Check that either name is specified or both pname & version are specified.
-assert (name == null) -> pname != null && version != null;
-assert (name != null) -> pname == null && version == null;
-let
-  condaBuilderEnv = import ./builder-env.nix { inherit pkgs; };
-  realName = if (name != null) then name else "${pname}-${version}";
-in pkgs.stdenv.mkDerivation {
-  name = realName;
-  inherit src;
-  buildCommand =
-    ''
-    HOME=`pwd`
-    mkdir $out
-    ${condaBuilderEnv}/bin/conda-builder-env -c "conda build --no-anaconda-upload --no-test --output-folder $out $src/${recipe}"
-
-    mkdir -p $out/nix-support
-    echo file conda $out/*/*.tar.bz2 >> $out/nix-support/hydra-build-products
-    '';
-}

artiq-fast/conda/builder-env.nix

@@ -1,47 +0,0 @@
-{ pkgs }:
-
-with pkgs;
-
-let
-  condaDeps = [ stdenv.cc xorg.libSM xorg.libICE xorg.libX11 xorg.libXau xorg.libXi xorg.libXrender libselinux libGL ];
-  # Use the full Anaconda distribution, which already contains conda-build and its many dependencies,
-  # so we don't have to manually deal with them.
-  condaInstaller = fetchurl {
-    url = "https://repo.anaconda.com/archive/Anaconda3-2019.03-Linux-x86_64.sh";
-    sha256 = "0fmpdd5876ylds98mydmv5klnwlzasa461k0l1f4vhbw96vm3j25";
-  };
-  condaSrcChmod = runCommand "conda-src-chmod" { } "mkdir $out; cp ${condaInstaller} $out/conda-installer.sh; chmod +x $out/conda-installer.sh";
-  condaInstallerEnv = buildFHSUserEnv {
-    name = "conda-installer-env";
-    targetPkgs = pkgs: ([ condaSrcChmod ] ++ condaDeps);
-  };
-
-  # for binutils
-  libiconv-filename = "libiconv-1.15-h516909a_1006.tar.bz2";
-  libiconv = pkgs.fetchurl {
-    url = "https://anaconda.org/conda-forge/libiconv/1.15/download/linux-64/${libiconv-filename}";
-    sha256 = "1y1g807881j95f9s6mjinf6b7mqa51vc9jf0v7cx8hn7xx4d10ik";
-  };
-
-  condaInstalled = runCommand "conda-installed" { }
-    ''
-    ${condaInstallerEnv}/bin/conda-installer-env -c "${condaSrcChmod}/conda-installer.sh -p $out -b"
-    substituteInPlace $out/lib/python3.7/site-packages/conda/gateways/disk/__init__.py \
-      --replace "os.chmod(path, 0o2775)" "pass"
-
-    # The conda garbage breaks if the package filename is prefixed with the Nix store hash.
-    # Symptom is "WARNING conda.core.prefix_data:_load_single_record(167): Ignoring malformed
-    # prefix record at: /nix/store/[...].json", and the package is not registered in the conda
-    # list, even though its files are installed.
-    ln -s ${libiconv} ${libiconv-filename}
-    ${condaInstallerEnv}/bin/conda-installer-env -c "$out/bin/conda install ${libiconv-filename}"
-    '';
-in
-  buildFHSUserEnv {
-    name = "conda-builder-env";
-    targetPkgs = pkgs: ([ condaInstalled ] ++ condaDeps ++ [
-        # for llvm-or1k
-        cmake
-      ]
-    );
-  }

artiq-fast/conda/fake-source.nix

@@ -1,57 +0,0 @@
-{ pkgs }:
-{ name, version, src, extraSrcCommands ? "", dependencies ? [], extraYaml ? ""}:
-pkgs.runCommand "conda-fake-source-${name}" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
-    cp --no-preserve=mode,ownership -R ${src} workaround-conda
-    pushd workaround-conda
-    ${extraSrcCommands}
-    tar cf $out/src.tar .
-    popd
-    rm -rf workaround-conda
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: ${name}
-      version: ${version}
-
-    source:
-      url: ../src.tar
-
-    {% set data = load_setup_py_data() %}
-
-    build:
-      noarch: python
-      entry_points:
-        # NOTE: conda-build cannot distinguish between console and gui scripts
-        {% for entry_point_type, entry_points in data.get("entry_points", dict()).items() -%}
-        {% for entry_point in entry_points -%}
-        - {{ entry_point }}
-        {% endfor %}
-        {% endfor %}
-      ignore_prefix_files: True
-
-    requirements:
-      run:
-    ${pkgs.lib.concatStringsSep "\n" (map (s: "    - ${s}") dependencies)}
-
-    ${extraYaml}
-    EOF
-
-    cat << EOF > $out/fake-conda/build.sh
-    #!/bin/bash
-    set -e
-
-    export VERSIONEER_OVERRIDE=${version}
-    export LD_LIBRARY_PATH=/lib
-    python setup.py install \
-      --prefix=\$PREFIX \
-      --single-version-externally-managed \
-      --record=record.txt \
-      --no-compile
-
-    EOF
-    chmod 755 $out/fake-conda/build.sh
-    ''

artiq-fast/conda/llvm-or1k.nix

@@ -1,52 +0,0 @@
-{ pkgs, version, src }:
-
-let
-  fake-src = pkgs.runCommand "conda-fake-source-llvm-or1k" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
-    cp --no-preserve=mode,ownership -R ${src} workaround-conda
-    pushd workaround-conda
-    tar cf $out/src.tar .
-    popd
-    rm -rf workaround-conda
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: llvm-or1k
-      version: ${version}
-
-    # Use the nixpkgs cmake to build, so we are less bothered by conda idiocy.
-
-    source:
-      url: ../src.tar
-
-    EOF
-
-    cat << EOF > $out/fake-conda/build.sh
-    mkdir build
-    cd build
-    cmake .. \$COMPILER32 \
-      -DCMAKE_BUILD_TYPE=Release \
-      -DCMAKE_INSTALL_PREFIX=\$PREFIX \
-      -DLLVM_BUILD_LLVM_DYLIB=ON \
-      -DLLVM_LINK_LLVM_DYLIB=ON \
-      -DLLVM_TARGETS_TO_BUILD=X86\;ARM \
-      -DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K \
-      -DLLVM_ENABLE_ASSERTIONS=OFF \
-      -DLLVM_INSTALL_UTILS=ON \
-      -DLLVM_INCLUDE_TESTS=OFF \
-      -DLLVM_INCLUDE_DOCS=OFF \
-      -DLLVM_INCLUDE_EXAMPLES=OFF
-    make -j2
-    make install
-
-    EOF
-    chmod 755 $out/fake-conda/build.sh
-    '';
-in
-  import ./build.nix { inherit pkgs; } {
-    name = "conda-llvm-or1k";
-    src = fake-src;
-  }

artiq-fast/conda/llvmlite-artiq.nix

@@ -1,69 +0,0 @@
-{ pkgs, conda-llvm-or1k, version, src }:
-
-let
-  condaBuilderEnv = import ./builder-env.nix { inherit pkgs; };
-  fake-src = pkgs.runCommand "conda-fake-source-llvmlite-artiq" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    # work around yet more idiotic conda behavior - build breaks if write permissions aren't set on source files.
-    cp --no-preserve=mode,ownership -R ${src} workaround-conda
-    pushd workaround-conda
-    tar cf $out/src.tar .
-    popd
-    rm -rf workaround-conda
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: llvmlite-artiq
-      version: ${version}
-
-    source:
-      url: ../src.tar
-
-    # Again, we don't specify build dependencies since the conda garbage mistakenly thinks
-    # that they are not there if they have been installed from files.
-    requirements:
-      run:
-        - python
-        - ncurses [linux]
-    EOF
-
-    cat << EOF > $out/fake-conda/build.sh
-    #!/bin/bash
-    set -e
-
-    export LD_LIBRARY_PATH=/lib
-    python setup.py install \
-      --prefix=\$PREFIX \
-      --single-version-externally-managed \
-      --record=record.txt \
-      --no-compile
-
-    EOF
-    chmod 755 $out/fake-conda/build.sh
-    '';
-in
-  pkgs.stdenv.mkDerivation {
-    name = "conda-llvmlite-artiq";
-    src = fake-src;
-    buildCommand =
-      ''
-      HOME=`pwd`
-      mkdir $out
-      cat << EOF > conda-commands.sh
-      set -e
-
-      conda create --prefix ./conda_tmp ${conda-llvm-or1k}/*/*.tar.bz2
-      conda init
-      source .bashrc
-      conda activate ./conda_tmp
-
-      conda build --no-anaconda-upload --no-test --output-folder $out $src/fake-conda
-      EOF
-      ${condaBuilderEnv}/bin/conda-builder-env conda-commands.sh
-
-      mkdir -p $out/nix-support
-      echo file conda $out/*/*.tar.bz2 >> $out/nix-support/hydra-build-products
-      '';
-  }

artiq-fast/default.nix

@@ -1,163 +0,0 @@
-{ pkgs ? import <nixpkgs> {}}:
-with pkgs;
-let
-  artiq6 = pkgs.lib.strings.versionAtLeast mainPackages.artiq.version "6.0";
-  pythonDeps = import ./pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = artiq6; };
-
-  boards = [
-    { target = "kasli"; variant = "tester"; }
-    { target = "kc705"; variant = "nist_clock"; }
-  ];
-  boardPackages = pkgs.lib.lists.foldr (board: start:
-    let
-      boardBinaries = import ./artiq-board.nix { inherit pkgs; } {
-        target = board.target;
-        variant = board.variant;
-      };
-    in
-      start // {
-        "artiq-board-${board.target}-${board.variant}" = boardBinaries;
-      }) {} boards;
-
-  mainPackages = rec {
-    inherit (pythonDeps) sipyco asyncserial pythonparser pyqtgraph-qt5 artiq-netboot misoc migen microscope jesd204b migen-axi lit outputcheck qasync;
-    binutils-or1k = callPackage ./pkgs/binutils.nix { platform = "or1k"; target = "or1k-linux"; };
-    binutils-arm = callPackage ./pkgs/binutils.nix { platform = "arm"; target = "armv7-unknown-linux-gnueabihf"; };
-    llvm-or1k = callPackage ./pkgs/llvm-or1k.nix {};
-    rustc = callPackage ./pkgs/rust/rustc-with-crates.nix
-      ((stdenv.lib.optionalAttrs (stdenv.cc.isGNU && stdenv.hostPlatform.isi686) {
-         stdenv = overrideCC stdenv gcc6; # with gcc-7: undefined reference to `__divmoddi4'
-       }) //
-       { inherit llvm-or1k; });
-    cargo = callPackage ./pkgs/rust/cargo.nix { inherit rustc; };
-    cargo-vendor = callPackage ./pkgs/rust/cargo-vendor.nix {};
-    llvmlite-artiq = callPackage ./pkgs/llvmlite-artiq.nix { inherit llvm-or1k; };
-    libartiq-support = callPackage ./pkgs/libartiq-support.nix { inherit rustc; };
-    artiq = callPackage ./pkgs/artiq.nix { inherit pythonDeps binutils-or1k binutils-arm llvm-or1k llvmlite-artiq libartiq-support lit outputcheck; };
-    artiq-env = (pkgs.python3.withPackages(ps: [ artiq ])).overrideAttrs (oldAttrs: { name = "${pkgs.python3.name}-artiq-env-${artiq.version}"; });
-    openocd = callPackage ./pkgs/openocd.nix {};
-  };
-
-  condaNoarch = {
-    conda-pythonparser = import ./conda/build.nix { inherit pkgs; } {
-      pname = "conda-pythonparser";
-      inherit (pythonDeps.pythonparser) version;
-      src = import ./conda/fake-source.nix { inherit pkgs; } {
-        name = "pythonparser";
-        inherit (pythonDeps.pythonparser) version src;
-        extraSrcCommands = "patch -p1 < ${./pkgs/pythonparserver.patch}";
-        dependencies = ["regex"];
-      };
-    };
-    conda-sipyco = import ./conda/build.nix { inherit pkgs; } {
-      pname = "conda-sipyco";
-      inherit (pythonDeps.sipyco) version;
-      src = import ./conda/fake-source.nix { inherit pkgs; } {
-        name = "sipyco";
-        inherit (pythonDeps.sipyco) version src;
-        dependencies = ["numpy"];
-      };
-    };
-    conda-quamash = import ./conda/build.nix { inherit pkgs; } {
-      pname = "conda-quamash";
-      inherit (pkgs.python3Packages.quamash) version;
-      src = import ./conda/fake-source.nix { inherit pkgs; } {
-        name = "quamash";
-        inherit (pkgs.python3Packages.quamash) version src;
-      };
-     };
-    conda-qasync = import ./conda/build.nix { inherit pkgs; } {
-      pname = "conda-qasync";
-      inherit (pythonDeps.qasync) version;
-      src = import ./conda/fake-source.nix { inherit pkgs; } {
-        name = "qasync";
-        inherit (pythonDeps.qasync) version src;
-      };
-    };
-    conda-bscan-spi-bitstreams = import ./conda/bscan-spi-bitstreams.nix {
-      inherit pkgs;
-      inherit (mainPackages.openocd) bscan_spi_bitstreams;
-    };
-    conda-artiq = import ./conda/artiq.nix { inherit pkgs; };
-    conda-asyncserial = import ./conda/build.nix { inherit pkgs; } {
-      pname = "conda-asyncserial";
-      inherit (pythonDeps.asyncserial) version;
-      src = import ./conda/fake-source.nix { inherit pkgs; } {
-        name = "asyncserial";
-        inherit (pythonDeps.asyncserial) version src;
-        dependencies = ["pyserial"];
-      };
-    };
-  };
-
-  condaLinux = rec {
-    conda-binutils-or1k = import ./conda/binutils.nix {
-      inherit pkgs;
-      inherit (mainPackages.binutils-or1k) version src;
-      target = "or1k-linux";
-    };
-    conda-binutils-arm = import ./conda/binutils.nix {
-      inherit pkgs;
-      inherit (mainPackages.binutils-arm) version src;
-      target = "armv7-unknown-linux-gnueabihf";
-    };
-    conda-llvm-or1k = import ./conda/llvm-or1k.nix {
-      inherit pkgs;
-      inherit (mainPackages.llvm-or1k) version;
-      src = mainPackages.llvm-or1k.llvm-src;
-    };
-    conda-llvmlite-artiq = import ./conda/llvmlite-artiq.nix {
-      inherit pkgs conda-llvm-or1k;
-      inherit (mainPackages.llvmlite-artiq) version src;
-    };
-  };
-
-  condaWindowsLegacy = {
-    conda-windows-binutils-or1k = import ./conda-windows/redistribute.nix {
-      inherit pkgs;
-      name = "binutils-or1k";
-      filename = "binutils-or1k-linux-2.27-h93a10e1_6.tar.bz2";
-      baseurl = "https://anaconda.org/m-labs/binutils-or1k-linux/2.27/download/win-64/";
-      sha256 = "0gbks36hfsx3893mihj0bdmg5vwccrq5fw8xp9b9xb8p5pr8qhzx";
-    };
-    conda-windows-llvm-or1k = import ./conda-windows/redistribute.nix {
-      inherit pkgs;
-      name = "llvm-or1k";
-      filename = "llvm-or1k-6.0.0-25.tar.bz2";
-      baseurl = "https://anaconda.org/m-labs/llvm-or1k/6.0.0/download/win-64/";
-      sha256 = "06mnrg79rn9ni0d5z0x3jzb300nhqhbc2h9qbq5m50x3sgm8km63";
-    };
-    conda-windows-llvmlite-artiq = import ./conda-windows/redistribute.nix {
-      inherit pkgs;
-      name = "llvmlite-artiq";
-      filename = "llvmlite-artiq-0.23.0.dev-py35_5.tar.bz2";
-      baseurl = "https://anaconda.org/m-labs/llvmlite-artiq/0.23.0.dev/download/win-64/";
-      sha256 = "10w24w5ljvan06pbvwqj4pzal072jnyynmwm42dn06pq88ryz9wj";
-    };
-  };
-
-  condaWindowsExperimental = rec {
-    conda-windows-binutils-or1k = import ./conda-windows/binutils.nix {
-      inherit pkgs;
-      inherit (mainPackages.binutils-or1k) version src;
-      target = "or1k-linux";
-    };
-    conda-windows-binutils-arm = import ./conda-windows/binutils.nix {
-      inherit pkgs;
-      inherit (mainPackages.binutils-or1k) version src;
-      target = "armv7-unknown-linux-gnueabihf";
-    };
-    conda-windows-llvm-or1k = import ./conda-windows/llvm-or1k.nix {
-      inherit pkgs;
-      inherit (mainPackages.llvm-or1k) version;
-      src = mainPackages.llvm-or1k.llvm-src;
-    };
-    conda-windows-llvmlite-artiq = import ./conda-windows/llvmlite-artiq.nix {
-      inherit pkgs conda-windows-llvm-or1k;
-      inherit (mainPackages.llvmlite-artiq) version src;
-    };
-  };
-
-  condaWindows = if artiq6 then condaWindowsExperimental else condaWindowsLegacy;
-in
-  boardPackages // mainPackages // condaNoarch // condaLinux // condaWindows

artiq-fast/fetchcargo.nix

@@ -1,36 +0,0 @@
-{ stdenv, cacert, git, cargo, cargo-vendor }:
-{ name, src, sha256 }:
-stdenv.mkDerivation {
-  name = "${name}-vendor";
-  strictDeps = true;
-  nativeBuildInputs = [ cacert git cargo cargo-vendor ];
-  inherit src;
-
-  phases = "unpackPhase patchPhase installPhase";
-
-  installPhase = ''
-    if [[ ! -f Cargo.lock ]]; then
-        echo
-        echo "ERROR: The Cargo.lock file doesn't exist"
-        echo
-        echo "Cargo.lock is needed to make sure that cargoSha256 doesn't change"
-        echo "when the registry is updated."
-        echo
-
-        exit 1
-    fi
-
-    export CARGO_HOME=$(mktemp -d cargo-home.XXX)
-
-    cargo vendor
-
-    cp -ar vendor $out
-  '';
-
-  outputHashAlgo = "sha256";
-  outputHashMode = "recursive";
-  outputHash = sha256;
-
-  impureEnvVars = stdenv.lib.fetchers.proxyImpureEnvVars;
-  preferLocalBuild = true;
-}

artiq-fast/pkgs/artiq-src.nix

@@ -1 +0,0 @@
-{ fetchgit }: <artiqSrc>

artiq-fast/pkgs/artiq-timestamp.nix

@@ -1,14 +0,0 @@
-{ stdenv, git, fetchgit }:
-let
-  artiq-timestamp = stdenv.mkDerivation {
-    name = "artiq-timestamp";
-    src = import ./artiq-src.nix { inherit fetchgit; };
-    buildPhase = ''
-      TIMESTAMP=`${git}/bin/git log -1 --format=%ct`
-    '';
-    installPhase = ''
-      echo -n $TIMESTAMP > $out
-    '';
-  };
-in
-  builtins.readFile artiq-timestamp

artiq-fast/pkgs/artiq-version.nix

@@ -1,22 +0,0 @@
-{ stdenv, git, fetchgit }:
-let
-  artiq-version = stdenv.mkDerivation {
-    name = "artiq-version";
-    src = import ./artiq-src.nix { inherit fetchgit; };
-    # keep in sync with ../../artiq-fast.nix
-    buildPhase = ''
-      REV=`${git}/bin/git rev-parse HEAD`
-      MAJOR_VERSION=`cat MAJOR_VERSION`
-      if [ -e BETA ]; then
-        SUFFIX=".beta"
-      else
-        SUFFIX=""
-      fi
-      COMMIT_COUNT=`${git}/bin/git rev-list --count HEAD`
-    '';
-    installPhase = ''
-      echo -n $MAJOR_VERSION.$COMMIT_COUNT.`cut -c1-8 <<< $REV`$SUFFIX > $out
-    '';
-  };
-in
-  builtins.readFile artiq-version

artiq-fast/pkgs/artiq.nix

@@ -1,45 +0,0 @@
-{ stdenv, lib, pythonDeps, fetchgit, git, python3Packages, qt5, binutils-or1k, binutils-arm, llvm-or1k, llvmlite-artiq, libartiq-support, lit, outputcheck }:
-
-python3Packages.buildPythonPackage rec {
-  pname = "artiq";
-  version = import ./artiq-version.nix { inherit stdenv fetchgit git; };
-  src = import ./artiq-src.nix { inherit fetchgit; };
-
-  preBuild = "export VERSIONEER_OVERRIDE=${version}";
-
-  nativeBuildInputs = [ qt5.wrapQtAppsHook ];
-  propagatedBuildInputs = [ binutils-or1k llvm-or1k llvmlite-artiq ]
-    ++ (lib.lists.optionals (lib.strings.versionAtLeast version "6.0") [ binutils-arm ])
-    ++ (with pythonDeps; [ sipyco pyqtgraph-qt5 pythonparser ])
-    ++ (with python3Packages; [ pygit2 numpy dateutil scipy prettytable pyserial python-Levenshtein h5py pyqt5 ])
-    ++ [(if (lib.strings.versionAtLeast version "6.0") then pythonDeps.qasync else python3Packages.quamash)];
-
-  dontWrapQtApps = true;
-  postFixup = ''
-    wrapQtApp "$out/bin/artiq_dashboard"
-    wrapQtApp "$out/bin/artiq_browser"
-    wrapQtApp "$out/bin/artiq_session"
-  '';
-
-  # Modifies PATH to pass the wrapped python environment (i.e. python3.withPackages(...) to subprocesses.
-  # Allows subprocesses using python to find all packages you have installed
-  makeWrapperArgs = [ ''--run 'if [ ! -z "$NIX_PYTHONPREFIX" ]; then export PATH=$NIX_PYTHONPREFIX/bin:$PATH;fi' '' ];
-
-  checkInputs = [ binutils-or1k outputcheck ];
-  checkPhase =
-  ''
-  python -m unittest discover -v artiq.test
-
-  TESTDIR=`mktemp -d`
-  cp --no-preserve=mode,ownership -R ${src}/artiq/test/lit $TESTDIR
-  LIBARTIQ_SUPPORT=${libartiq-support}/libartiq_support.so ${lit}/bin/lit -v $TESTDIR/lit
-  '';
-
-
-  meta = with stdenv.lib; {
-    description = "A leading-edge control system for quantum information experiments";
-    homepage = https://m-labs/artiq;
-    license = licenses.lgpl3;
-    maintainers = [ maintainers.sb0 ];
-  };
-}

artiq-fast/pkgs/binutils.nix

@@ -1,35 +0,0 @@
-{ stdenv, buildPackages
-, fetchurl, zlib
-, platform, target
-}:
-
-stdenv.mkDerivation rec {
-  basename = "binutils";
-  inherit platform;
-  version = "2.30";
-  name = "${basename}-${platform}-${version}";
-  src = fetchurl {
-    url = "https://ftp.gnu.org/gnu/binutils/binutils-${version}.tar.bz2";
-    sha256 = "028cklfqaab24glva1ks2aqa1zxa6w6xmc8q34zs1sb7h22dxspg";
-  };
-  configureFlags =
-    [ "--enable-shared" "--enable-deterministic-archives" "--target=${target}"];
-  outputs = [ "out" "info" "man" ];
-  depsBuildBuild = [ buildPackages.stdenv.cc ];
-  buildInputs = [ zlib ];
-  enableParallelBuilding = true;
-  meta = {
-    description = "Tools for manipulating binaries (linker, assembler, etc.)";
-    longDescription = ''
-      The GNU Binutils are a collection of binary tools.  The main
-      ones are `ld' (the GNU linker) and `as' (the GNU assembler).
-      They also include the BFD (Binary File Descriptor) library,
-      `gprof', `nm', `strip', etc.
-    '';
-    homepage = http://www.gnu.org/software/binutils/;
-    license = stdenv.lib.licenses.gpl3Plus;
-    /* Give binutils a lower priority than gcc-wrapper to prevent a
-       collision due to the ld/as wrappers/symlinks in the latter. */
-    priority = "10";
-  };
-}

artiq-fast/pkgs/libartiq-support.nix

@@ -1,15 +0,0 @@
-{ stdenv, fetchgit, git, rustc }:
-stdenv.mkDerivation rec {
-  pname = "libartiq-support";
-  version = import ./artiq-version.nix { inherit stdenv fetchgit git; };
-
-  src = import ./artiq-src.nix { inherit fetchgit; };
-
-  buildInputs = [ rustc ];
-  phases = [ "buildPhase" ];
-  buildPhase =
-  ''
-  mkdir $out
-  rustc ${src}/artiq/test/libartiq_support/lib.rs --out-dir $out -Cpanic=unwind -g
-  '';
-}

artiq-fast/pkgs/llvm-or1k.nix

@@ -1,66 +0,0 @@
-{ stdenv
-, fetchFromGitHub, runCommand
-, perl, groff, cmake, libxml2, python, libffi, valgrind
-}:
-
-let
-  llvm-src = fetchFromGitHub {
-    rev = "7746fe85489e92e1caffda18b9d7b2ae9e5da1a8";
-    owner = "m-labs";
-    repo = "llvm-or1k";
-    sha256 = "0jqbb3k9r91swsyrdak8fzvs1qi451zy8dqmpqriaxk5g83ny5b7";
-  };
-  clang-src = fetchFromGitHub {
-    rev = "9e996136d52ed506ed8f57ef8b13b0f0f735e6a3";
-    owner = "m-labs";
-    repo = "clang-or1k";
-    sha256 = "0w5f450i76y162aswi2c7jip8x3arzljaxhbqp8qfdffm0rdbjp4";
-  };
-  llvm-clang-src = runCommand "llvm-clang-src" {}
-    ''
-    mkdir -p $out
-    mkdir -p $out/tools/clang
-    cp -r ${llvm-src}/* $out/
-    cp -r ${clang-src}/* $out/tools/clang
-    '';
-in
-  stdenv.mkDerivation rec {
-    pname = "llvm-or1k";
-    version = "6.0.0";
-    passthru.llvm-src = llvm-src;
-    src = llvm-clang-src;
-
-    buildInputs = [ perl groff cmake libxml2 python libffi ] ++ stdenv.lib.optional stdenv.isLinux valgrind;
-
-    preBuild = ''
-      NIX_BUILD_CORES=4
-      makeFlagsArray=(-j''$NIX_BUILD_CORES)
-      mkdir -p $out/
-    '';
-
-    cmakeFlags = with stdenv; [
-      "-DCMAKE_BUILD_TYPE=Release"
-      "-DLLVM_BUILD_LLVM_DYLIB=ON"
-      "-DLLVM_LINK_LLVM_DYLIB=ON"
-      "-DLLVM_TARGETS_TO_BUILD=X86;ARM"
-      "-DLLVM_EXPERIMENTAL_TARGETS_TO_BUILD=OR1K"
-      "-DLLVM_ENABLE_ASSERTIONS=OFF"
-      "-DLLVM_INSTALL_UTILS=ON"
-      "-DLLVM_INCLUDE_TESTS=OFF"
-      "-DLLVM_INCLUDE_DOCS=OFF"
-      "-DLLVM_INCLUDE_EXAMPLES=OFF"
-      "-DCLANG_ENABLE_ARCMT=OFF"
-      "-DCLANG_ENABLE_STATIC_ANALYZER=OFF"
-      "-DCLANG_INCLUDE_TESTS=OFF"
-      "-DCLANG_INCLUDE_DOCS=OFF"
-    ];
-
-    enableParallelBuilding = true;
-    meta = {
-      description = "Collection of modular and reusable compiler and toolchain technologies";
-      homepage = http://llvm.org/;
-      license = stdenv.lib.licenses.bsd3;
-      maintainers = with stdenv.lib.maintainers; [ sb0 ];
-      platforms = stdenv.lib.platforms.all;
-    };
-  }

artiq-fast/pkgs/llvmlite-artiq.nix

@@ -1,23 +0,0 @@
-{ stdenv, fetchFromGitHub, llvm-or1k, makeWrapper, python3, ncurses, zlib, python3Packages }:
-python3Packages.buildPythonPackage rec {
-  pname = "llvmlite-artiq";
-  version = "0.23.0.dev";
-  src = fetchFromGitHub {
-    rev = "158f9d3a898dbf055ca513d69505df288c681fea";
-    owner = "m-labs";
-    repo = "llvmlite";
-    sha256 = "1anniwya5jhhr2sxfdnwrsjy17yrk3x61i9hsm1rljsb8zvh68d5";
-  };
-
-  buildInputs = [ makeWrapper python3 ncurses zlib llvm-or1k python3Packages.setuptools ];
-
-  preBuild = "export LLVM_CONFIG=${llvm-or1k}/bin/llvm-config";
-
-  meta = with stdenv.lib; {
-      description = "A lightweight LLVM python binding for writing JIT compilers";
-      homepage    = "http://llvmlite.pydata.org/";
-      maintainers = with maintainers; [ sb0 ];
-      license     = licenses.bsd2;
-      platforms   = platforms.unix;
-  };
-}

artiq-fast/pkgs/openocd.nix

@@ -1,74 +0,0 @@
-{ stdenv, fetchFromGitHub, autoreconfHook, libftdi, libusb1, pkgconfig, hidapi }:
-
-stdenv.mkDerivation rec {
-  pname = "openocd-mlabs";
-  version = "0.10.0";
-
-  src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "openocd";
-      fetchSubmodules = true;
-      rev = "c383a57adcff332b2c5cf8d55a84626285b42c2c";
-      sha256 = "0xlj9cs72acx3zqagvr7f1c0v6lnqhl8fgrlhgmhmvk5n9knk492";
-  };
-  bscan_spi_bitstreams = fetchFromGitHub {
-      owner = "quartiq";
-      repo = "bscan_spi_bitstreams";
-      rev = "01d8f819f15baf9a8cc5d96945a51e4d267ff564";
-      sha256 = "1zqv47kzgvbn4c8cr019a6wcja7gn5h1z4kvw5bhpc72fyhagal9";
-  };
-
-  nativeBuildInputs = [ pkgconfig ];
-  buildInputs = [ autoreconfHook libftdi libusb1 hidapi ];
-
-  configureFlags = [
-    "--enable-jtag_vpi"
-    "--enable-usb_blaster_libftdi"
-    "--enable-amtjtagaccel"
-    "--enable-gw16012"
-    "--enable-presto_libftdi"
-    "--enable-openjtag_ftdi"
-    "--enable-oocd_trace"
-    "--enable-buspirate"
-    "--enable-sysfsgpio"
-    "--enable-remote-bitbang"
-    "--disable-werror"
-  ];
-
-  NIX_CFLAGS_COMPILE = [
-    "-Wno-implicit-fallthrough"
-    "-Wno-format-truncation"
-    "-Wno-format-overflow"
-    "-Wno-error=tautological-compare"
-  ];
-
-  postInstall = ''
-    mkdir -p "$out/etc/udev/rules.d"
-    rules="$out/share/openocd/contrib/60-openocd.rules"
-    if [ ! -f "$rules" ]; then
-        echo "$rules is missing, must update the Nix file."
-        exit 1
-    fi
-    ln -s "$rules" "$out/etc/udev/rules.d/"
-
-    mkdir -p "$out/share/bscan-spi-bitstreams"
-    cp ${bscan_spi_bitstreams}/*.bit "$out/share/bscan-spi-bitstreams"
-  '';
-
-  meta = with stdenv.lib; {
-    description = "Free and Open On-Chip Debugging, In-System Programming and Boundary-Scan Testing";
-    longDescription = ''
-      OpenOCD provides on-chip programming and debugging support with a layered
-      architecture of JTAG interface and TAP support, debug target support
-      (e.g. ARM, MIPS), and flash chip drivers (e.g. CFI, NAND, etc.).  Several
-      network interfaces are available for interactiving with OpenOCD: HTTP,
-      telnet, TCL, and GDB.  The GDB server enables OpenOCD to function as a
-      "remote target" for source-level debugging of embedded systems using the
-      GNU GDB program.
-    '';
-    homepage = http://openocd.sourceforge.net/;
-    license = licenses.gpl2Plus;
-    maintainers = with maintainers; [ sb0 ];
-    platforms = platforms.linux;
-  };
-}

artiq-fast/pkgs/python-deps.nix

@@ -1,308 +0,0 @@
-{ stdenv, fetchgit, fetchFromGitHub, python3Packages, misoc-new }:
-
-rec {
-  # User dependencies
-  sipyco = python3Packages.buildPythonPackage rec {
-    pname = "sipyco";
-    version = "1.2";
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "sipyco";
-      rev = "v${version}";
-      sha256 = "02x2s66x9bbzj82d823vjg2i73w7iqwvkrjbbyrsav6ccj7f90sj";
-    };
-    propagatedBuildInputs = with python3Packages; [ numpy ];
-  };
-
-  asyncserial = python3Packages.buildPythonPackage rec {
-    pname = "asyncserial";
-    version = "0.1";
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "asyncserial";
-      rev = "d95bc1d6c791b0e9785935d2f62f628eb5cdf98d";
-      sha256 = "0yzkka9jk3612v8gx748x6ziwykq5lr7zmr9wzkcls0v2yilqx9k";
-    };
-    propagatedBuildInputs = with python3Packages; [ pyserial ];
-  };
-
-  pythonparser = python3Packages.buildPythonPackage rec {
-    pname = "pythonparser";
-    version = "1.3";
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "pythonparser";
-      rev = "5b391fe86f43bb9f4f96c5bc0532e2a112db2936";
-      sha256 = "1gw1fk4y2l6bwq0fg2a9dfc1rvq8cv492dyil96amjdhsxvnx35b";
-    };
-    patches = [ ./pythonparserver.patch ];
-    propagatedBuildInputs = with python3Packages; [ regex ];
-  };
-
-  pyqtgraph-qt5 = python3Packages.buildPythonPackage rec {
-    pname = "pyqtgraph_qt5";
-    version = "0.11.0";
-    doCheck = false;
-    pythonImportsCheck = [ "pyqtgraph" ];
-    src = fetchFromGitHub {
-      owner = "pyqtgraph";
-      repo = "pyqtgraph";
-      rev = "pyqtgraph-${version}";
-      sha256 = "03fvpkqdn80ni51msvyivmghw41qk4vplwdqndkvzzzlppimdjbn";
-    };
-    propagatedBuildInputs = with python3Packages; [ scipy numpy pyqt5 pyopengl ];
-  };
-
-  qasync = python3Packages.buildPythonPackage rec {
-    pname = "qasync";
-    version = "0.10.0";
-
-    src = fetchFromGitHub {
-      owner = "CabbageDevelopment";
-      repo = "qasync";
-      rev = "v${version}";
-      sha256 = "1zga8s6dr7gk6awmxkh4pf25gbg8n6dv1j4b0by7y0fhi949qakq";
-    };
-
-    propagatedBuildInputs = [ python3Packages.pyqt5 ];
-
-    checkInputs = [ python3Packages.pytest ];
-    checkPhase = ''
-      pytest -k 'test_qthreadexec.py' # the others cause the test execution to be aborted, I think because of asyncio
-    '';
-  };
-
-  # Development/firmware dependencies
-  artiq-netboot = python3Packages.buildPythonPackage rec {
-    pname = "artiq-netboot";
-    version = "unstable-2020-10-15";
-
-    src = fetchgit {
-      url = "https://git.m-labs.hk/m-labs/artiq-netboot.git";
-      rev = "04f69eb07df73abe4b89fde2c24084f7664f2104";
-      sha256 = "0ql4fr8m8gpb2yql8aqsdqsssxb8zqd6l65kl1f6s9845zy7shs9";
-    };
-  };
-
-  misoc = python3Packages.buildPythonPackage {
-    pname = "misoc";
-    version = if misoc-new then "unstable-2020-12-23" else "unstable-2020-05-29";
-
-    src = if misoc-new
-      then (fetchFromGitHub {
-        owner = "m-labs";
-        repo = "misoc";
-        rev = "c19083f4e86186c8ef11c5119b47f36ed655d19c";
-        sha256 = "14n9gkc5nffc6bvp5dhh4akxispq52iknm2nk3j4zcc3yy47q3an";
-        fetchSubmodules = true;
-      })
-      else (fetchFromGitHub {
-        owner = "m-labs";
-        repo = "misoc";
-        rev = "7e5fe8d38835175202dad2c51d37b20b76fd9e16";
-        sha256 = "0i8bppz7x2s45lx9n49c0r87pqps09z35yzc17amvx21qsplahxn";
-        fetchSubmodules = true;
-      });
-
-    # TODO: fix misoc bitrot and re-enable tests
-    doCheck = false;
-
-    propagatedBuildInputs = with python3Packages; [ pyserial jinja2 numpy asyncserial migen ];
-
-    meta = with stdenv.lib; {
-      description = "A high performance and small footprint system-on-chip based on Migen";
-      homepage    = "https://m-labs.hk/migen";
-      license     = licenses.bsd2;
-      platforms   = platforms.unix;
-    };
-  };
-
-  migen = python3Packages.buildPythonPackage rec {
-    pname = "migen";
-    version = "unstable-2021-01-19";
-
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "migen";
-      rev = "40b1092a05ec7659c42c8087b0c229dcfb5d9ca1";
-      sha256 = "167yiwnrjzk3xwzfb122fs605639dzlrlyvi11szzwgsj7g226zq";
-    };
-
-    propagatedBuildInputs = with python3Packages; [ colorama ];
-
-    meta = with stdenv.lib; {
-      description = "A Python toolbox for building complex digital hardware";
-      homepage    = "https://m-labs.hk/migen";
-      license     = licenses.bsd2;
-      platforms   = platforms.unix;
-    };
-  };
-
-  microscope = python3Packages.buildPythonPackage rec {
-    pname = "microscope";
-    version = "unstable-2019-05-17";
-
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "microscope";
-      rev = "bcbc5346c71ad8f7a1a0b7771a9d126b18fdf558";
-      sha256 = "1hslm2nn2z1bl84ya4fsab3pvcdmbziwn7zkai0cm3bv525fjxxd";
-    };
-
-    propagatedBuildInputs = with python3Packages; [ pyserial prettytable msgpack migen ];
-
-    meta = with stdenv.lib; {
-      description = "Finding the bacteria in rotting FPGA designs";
-      homepage    = "https://m-labs.hk/migen";
-      license     = licenses.bsd2;
-      platforms   = platforms.unix;
-    };
-  };
-
-  jesd204b = python3Packages.buildPythonPackage rec {
-    pname = "jesd204b";
-    version = "unstable-2020-12-18";
-
-    src = fetchFromGitHub {
-      owner = "m-labs";
-      repo = "jesd204b";
-      rev = "23bd08f5ee95eb42502f9fbe1c2a45e8c083eab9";
-      sha256 = "0x2mh5fv4q0b1f8pjc2kcyjqbfgiyp1hlvbfgk8dbsraj50i566h";
-    };
-
-    propagatedBuildInputs = with python3Packages; [ migen misoc ];
-
-    meta = with stdenv.lib; {
-      description = "JESD204B core for Migen/MiSoC";
-      homepage    = "https://m-labs.hk/migen";
-      license     = licenses.bsd2;
-      platforms   = platforms.unix;
-    };
-  };
-
-  fastnumbers = python3Packages.buildPythonPackage rec {
-    pname = "fastnumbers";
-    version = "2.2.1";
-
-    src = python3Packages.fetchPypi {
-      inherit pname version;
-      sha256 = "0j15i54p7nri6hkzn1wal9pxri4pgql01wgjccig6ar0v5jjbvsy";
-    };
-
-    meta = with stdenv.lib; {
-      description = "Super-fast and clean conversions to numbers";
-      homepage    = "https://github.com/SethMMorton/fastnumbers";
-      license     = licenses.mit;
-      platforms   = platforms.unix;
-    };
-  };
-
-  ramda = python3Packages.buildPythonPackage {
-    pname = "ramda";
-    version = "unstable-2019-02-01";
-
-    src = fetchFromGitHub {
-      owner = "peteut";
-      repo = "ramda.py";
-      rev = "bd58f8e69d0e9a713d9c1f286a1ac5e5603956b1";
-      sha256 = "0qzd5yp9lbaham8p1wiymdjapzbqsli7lvngv24c3z4ybd9jlq9g";
-    };
-
-    nativeBuildInputs = [ python3Packages.pbr ];
-    propagatedBuildInputs = [ python3Packages.future fastnumbers ];
-
-    checkInputs = [ python3Packages.pytest python3Packages.pytest-flake8 ];
-    checkPhase = "pytest";
-
-    preBuild = ''
-      export PBR_VERSION=0.0.1
-    '';
-
-    meta = with stdenv.lib; {
-      description = "Ramda, ported to Python";
-      homepage    = "https://github.com/peteut/ramda.py";
-      license     = licenses.mit;
-      platforms   = platforms.unix;
-    };
-  };
-
-  migen-axi = python3Packages.buildPythonPackage {
-    pname = "migen-axi";
-    version = "unstable-2021-01-22";
-
-    src = fetchFromGitHub {
-      owner = "peteut";
-      repo = "migen-axi";
-      rev = "9439ee900358598cecc682db327aa30e506172b5";
-      sha256 = "1z5s8ifq7fbpqi6sx2i87rmz63kbgh9ck94fs2qf21ixhxi46nm3";
-    };
-
-    nativeBuildInputs = [ python3Packages.pbr ];
-    propagatedBuildInputs = [ python3Packages.click python3Packages.numpy python3Packages.toolz python3Packages.jinja2 ramda migen misoc ];
-
-    postPatch = ''
-      substituteInPlace requirements.txt \
-        --replace "jinja2==2.10.3" "jinja2"
-      substituteInPlace requirements.txt \
-        --replace "future==0.18.2" "future"
-      substituteInPlace requirements.txt \
-        --replace "ramda==0.5.5" "ramda"
-      substituteInPlace requirements.txt \
-        --replace "colorama==0.4.3" "colorama"
-    '';
-
-
-    checkInputs = [ python3Packages.pytest python3Packages.pytest-flake8 ];
-    checkPhase = "pytest";
-
-    preBuild = ''
-      export PBR_VERSION=0.0.1
-    '';
-
-    meta = with stdenv.lib; {
-      description = "AXI support for Migen/MiSoC";
-      homepage    = "https://github.com/peteut/migen-axi";
-      license     = licenses.mit;
-      platforms   = platforms.unix;
-    };
-  };
-
-  # not using the nixpkgs version because it is Python 2 and an "application"
-  lit = python3Packages.buildPythonPackage rec {
-    pname = "lit";
-    version = "0.7.1";
-
-    src = python3Packages.fetchPypi {
-      inherit pname version;
-      sha256 = "ecef2833aef7f411cb923dac109c7c9dcc7dbe7cafce0650c1e8d19c243d955f";
-    };
-
-    # Non-standard test suite. Needs custom checkPhase.
-    doCheck = false;
-
-    meta = with stdenv.lib; {
-      description = "Portable tool for executing LLVM and Clang style test suites";
-      homepage = http://llvm.org/docs/CommandGuide/lit.html;
-      license = licenses.ncsa;
-    };
-  };
-
-  outputcheck = python3Packages.buildPythonApplication rec {
-    pname = "outputcheck";
-    version = "0.4.2";
-
-    src = fetchFromGitHub {
-      owner = "stp";
-      repo = "OutputCheck";
-      rev = "e0f533d3c5af2949349856c711bf4bca50022b48";
-      sha256 = "1y27vz6jq6sywas07kz3v01sqjd0sga9yv9w2cksqac3v7wmf2a0";
-    };
-    prePatch = "echo ${version} > RELEASE-VERSION";
-
-    meta = with stdenv.lib; {
-      description = "A tool for checking tool output inspired by LLVM's FileCheck";
-      homepage    = "https://github.com/stp/OutputCheck";
-      license     = licenses.bsd3;
-    };
-  };
-}

artiq-fast/pkgs/pythonparserver.patch

@@ -1,35 +0,0 @@
-diff --git a/pythonparser/lexer.py b/pythonparser/lexer.py
-index a62eaf1..c70e85a 100644
---- a/pythonparser/lexer.py
-+++ b/pythonparser/lexer.py
-@@ -79,6 +79,8 @@ class Lexer:
-         (3, 4): _reserved_3_1,
-         (3, 5): _reserved_3_5,
-         (3, 6): _reserved_3_5,
-+        (3, 7): _reserved_3_5,
-+        (3, 8): _reserved_3_5,
-     }
-     """
-     A map from a tuple (*major*, *minor*) corresponding to Python version to
-@@ -102,6 +104,8 @@ class Lexer:
-         (3, 4): _string_prefixes_3_3,
-         (3, 5): _string_prefixes_3_3,
-         (3, 6): _string_prefixes_3_6,
-+        (3, 7): _string_prefixes_3_6,
-+        (3, 8): _string_prefixes_3_6,
-     }
-     """
-     A map from a tuple (*major*, *minor*) corresponding to Python version to
-diff --git a/pythonparser/parser.py b/pythonparser/parser.py
-index 10c741d..62b93e1 100644
---- a/pythonparser/parser.py
-+++ b/pythonparser/parser.py
-@@ -419,7 +419,7 @@ class Parser(object):
-             self.expr_stmt_1     = self.expr_stmt_1__26
-             self.yield_expr      = self.yield_expr__26
-             return
--        elif version in ((3, 0), (3, 1), (3, 2), (3, 3), (3, 4), (3, 5), (3, 6)):
-+        elif version in ((3, 0), (3, 1), (3, 2), (3, 3), (3, 4), (3, 5), (3, 6), (3, 7), (3, 8)):
-             if version == (3, 0):
-                 self.with_stmt       = self.with_stmt__26 # lol
-             else:

artiq-fast/pkgs/rust/binaryBuild.nix

@@ -1,117 +0,0 @@
-{ stdenv, makeWrapper, bash, buildRustPackage, curl, darwin
-, version
-, src
-, platform
-, versionType
-}:
-
-let
-  inherit (stdenv.lib) optionalString;
-  inherit (darwin.apple_sdk.frameworks) Security;
-
-  bootstrapping = versionType == "bootstrap";
-
-  installComponents
-    = "rustc,rust-std-${platform}"
-    + (optionalString bootstrapping ",cargo")
-    ;
-in
-
-rec {
-  inherit buildRustPackage;
-
-  rustc = stdenv.mkDerivation rec {
-    name = "rustc-${versionType}-${version}";
-
-    inherit version;
-    inherit src;
-
-    meta = with stdenv.lib; {
-      homepage = http://www.rust-lang.org/;
-      description = "A safe, concurrent, practical language";
-      maintainers = with maintainers; [ sb0 ];
-      license = [ licenses.mit licenses.asl20 ];
-    };
-
-    buildInputs = [ bash ] ++ stdenv.lib.optional stdenv.isDarwin Security;
-
-    postPatch = ''
-      patchShebangs .
-    '';
-
-    installPhase = ''
-      ./install.sh --prefix=$out \
-        --components=${installComponents}
-
-      ${optionalString (stdenv.isLinux && bootstrapping) ''
-        patchelf \
-          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
-          "$out/bin/rustc"
-        patchelf \
-          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
-          "$out/bin/rustdoc"
-        patchelf \
-          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
-          "$out/bin/cargo"
-      ''}
-
-      ${optionalString (stdenv.isDarwin && bootstrapping) ''
-        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/rustc"
-        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/rustdoc"
-        install_name_tool -change /usr/lib/libiconv.2.dylib '${darwin.libiconv}/lib/libiconv.2.dylib' "$out/bin/cargo"
-        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/cargo"
-        install_name_tool -change /usr/lib/libcurl.4.dylib '${stdenv.lib.getLib curl}/lib/libcurl.4.dylib' "$out/bin/cargo"
-        for f in $out/lib/lib*.dylib; do
-          install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$f"
-        done
-      ''}
-
-      # Do NOT, I repeat, DO NOT use `wrapProgram` on $out/bin/rustc
-      # (or similar) here. It causes strange effects where rustc loads
-      # the wrong libraries in a bootstrap-build causing failures that
-      # are very hard to track down. For details, see
-      # https://github.com/rust-lang/rust/issues/34722#issuecomment-232164943
-    '';
-  };
-
-  cargo = stdenv.mkDerivation rec {
-    name = "cargo-${versionType}-${version}";
-
-    inherit version;
-    inherit src;
-
-    meta = with stdenv.lib; {
-      homepage = http://www.rust-lang.org/;
-      description = "A safe, concurrent, practical language";
-      maintainers = with maintainers; [ sb0 ];
-      license = [ licenses.mit licenses.asl20 ];
-    };
-
-    buildInputs = [ makeWrapper bash ] ++ stdenv.lib.optional stdenv.isDarwin Security;
-
-    postPatch = ''
-      patchShebangs .
-    '';
-
-    installPhase = ''
-      patchShebangs ./install.sh
-      ./install.sh --prefix=$out \
-        --components=cargo
-
-      ${optionalString (stdenv.isLinux && bootstrapping) ''
-        patchelf \
-          --set-interpreter $(cat $NIX_CC/nix-support/dynamic-linker) \
-          "$out/bin/cargo"
-      ''}
-
-      ${optionalString (stdenv.isDarwin && bootstrapping) ''
-        install_name_tool -change /usr/lib/libiconv.2.dylib '${darwin.libiconv}/lib/libiconv.2.dylib' "$out/bin/cargo"
-        install_name_tool -change /usr/lib/libresolv.9.dylib '${darwin.libresolv}/lib/libresolv.9.dylib' "$out/bin/cargo"
-        install_name_tool -change /usr/lib/libcurl.4.dylib '${stdenv.lib.getLib curl}/lib/libcurl.4.dylib' "$out/bin/cargo"
-      ''}
-
-      wrapProgram "$out/bin/cargo" \
-        --suffix PATH : "${rustc}/bin"
-    '';
-  };
-}

artiq-fast/pkgs/rust/bootstrap.nix

@@ -1,42 +0,0 @@
-{ stdenv, fetchurl, callPackage }:
-
-let
-  # Note: the version MUST be one version prior to the version we're
-  # building
-  version = "1.28.0";
-
-  # fetch hashes by running `print-hashes.sh 1.24.1`
-  hashes = {
-    i686-unknown-linux-gnu = "de7cdb4e665e897ea9b10bf6fd545f900683296456d6a11d8510397bb330455f";
-    x86_64-unknown-linux-gnu = "2a1390340db1d24a9498036884e6b2748e9b4b057fc5219694e298bdaa37b810";
-    armv7-unknown-linux-gnueabihf = "346558d14050853b87049e5e1fbfae0bf0360a2f7c57433c6985b1a879c349a2";
-    aarch64-unknown-linux-gnu = "9b6fbcee73070332c811c0ddff399fa31965bec62ef258656c0c90354f6231c1";
-    i686-apple-darwin = "752e2c9182e057c4a54152d1e0b3949482c225d02bb69d9d9a4127dc2a65fb68";
-    x86_64-apple-darwin = "5d7a70ed4701fe9410041c1eea025c95cad97e5b3d8acc46426f9ac4f9f02393";
-  };
-
-  platform =
-    if stdenv.hostPlatform.system == "i686-linux"
-    then "i686-unknown-linux-gnu"
-    else if stdenv.hostPlatform.system == "x86_64-linux"
-    then "x86_64-unknown-linux-gnu"
-    else if stdenv.hostPlatform.system == "armv7l-linux"
-    then "armv7-unknown-linux-gnueabihf"
-    else if stdenv.hostPlatform.system == "aarch64-linux"
-    then "aarch64-unknown-linux-gnu"
-    else if stdenv.hostPlatform.system == "i686-darwin"
-    then "i686-apple-darwin"
-    else if stdenv.hostPlatform.system == "x86_64-darwin"
-    then "x86_64-apple-darwin"
-    else throw "missing bootstrap url for platform ${stdenv.hostPlatform.system}";
-
-  src = fetchurl {
-     url = "https://static.rust-lang.org/dist/rust-${version}-${platform}.tar.gz";
-     sha256 = hashes."${platform}";
-  };
-
-in callPackage ./binaryBuild.nix
-  { inherit version src platform;
-    buildRustPackage = null;
-    versionType = "bootstrap";
-  }

artiq-fast/pkgs/rust/cargo-vendor-carnix.nix

@@ -1,693 +0,0 @@
-# Generated by carnix 0.10.0: carnix generate-nix --src .
-{ lib, buildPlatform, buildRustCrate, buildRustCrateHelpers, cratesIO, fetchgit }:
-with buildRustCrateHelpers;
-let inherit (lib.lists) fold;
-    inherit (lib.attrsets) recursiveUpdate;
-in
-rec {
-  crates = cratesIO // rec {
-# cargo-vendor-0.1.23
-
-    crates.cargo_vendor."0.1.23" = deps: { features?(features_.cargo_vendor."0.1.23" deps {}) }: buildRustCrate {
-      crateName = "cargo-vendor";
-      version = "0.1.23";
-      description = "A Cargo subcommand to vendor all crates.io dependencies onto the local\nfilesystem.\n";
-      authors = [ "Alex Crichton <alex@alexcrichton.com>" ];
-      edition = "2018";
-      src = exclude [ ".git" "target" ] ./.;
-      dependencies = mapFeatures features ([
-        (cratesIO.crates."cargo"."${deps."cargo_vendor"."0.1.23"."cargo"}" deps)
-        (cratesIO.crates."docopt"."${deps."cargo_vendor"."0.1.23"."docopt"}" deps)
-        (cratesIO.crates."env_logger"."${deps."cargo_vendor"."0.1.23"."env_logger"}" deps)
-        (cratesIO.crates."failure"."${deps."cargo_vendor"."0.1.23"."failure"}" deps)
-        (cratesIO.crates."serde"."${deps."cargo_vendor"."0.1.23"."serde"}" deps)
-        (cratesIO.crates."serde_json"."${deps."cargo_vendor"."0.1.23"."serde_json"}" deps)
-        (cratesIO.crates."toml"."${deps."cargo_vendor"."0.1.23"."toml"}" deps)
-      ]
-        ++ (if features.cargo_vendor."0.1.23".openssl or false then [ (cratesIO.crates.openssl."${deps."cargo_vendor"."0.1.23".openssl}" deps) ] else []));
-      features = mkFeatures (features."cargo_vendor"."0.1.23" or {});
-    };
-    features_.cargo_vendor."0.1.23" = deps: f: updateFeatures f (rec {
-      cargo."${deps.cargo_vendor."0.1.23".cargo}".default = true;
-      cargo_vendor."0.1.23".default = (f.cargo_vendor."0.1.23".default or true);
-      docopt."${deps.cargo_vendor."0.1.23".docopt}".default = true;
-      env_logger."${deps.cargo_vendor."0.1.23".env_logger}".default = true;
-      failure."${deps.cargo_vendor."0.1.23".failure}".default = true;
-      openssl = fold recursiveUpdate {} [
-        { "${deps.cargo_vendor."0.1.23".openssl}"."vendored" =
-          (f.openssl."${deps.cargo_vendor."0.1.23".openssl}"."vendored" or false) ||
-          (cargo_vendor."0.1.23"."vendored-openssl" or false) ||
-          (f."cargo_vendor"."0.1.23"."vendored-openssl" or false); }
-        { "${deps.cargo_vendor."0.1.23".openssl}".default = true; }
-      ];
-      serde = fold recursiveUpdate {} [
-        { "${deps.cargo_vendor."0.1.23".serde}"."derive" = true; }
-        { "${deps.cargo_vendor."0.1.23".serde}".default = true; }
-      ];
-      serde_json."${deps.cargo_vendor."0.1.23".serde_json}".default = true;
-      toml."${deps.cargo_vendor."0.1.23".toml}".default = true;
-    }) [
-      (cratesIO.features_.cargo."${deps."cargo_vendor"."0.1.23"."cargo"}" deps)
-      (cratesIO.features_.docopt."${deps."cargo_vendor"."0.1.23"."docopt"}" deps)
-      (cratesIO.features_.env_logger."${deps."cargo_vendor"."0.1.23"."env_logger"}" deps)
-      (cratesIO.features_.failure."${deps."cargo_vendor"."0.1.23"."failure"}" deps)
-      (cratesIO.features_.openssl."${deps."cargo_vendor"."0.1.23"."openssl"}" deps)
-      (cratesIO.features_.serde."${deps."cargo_vendor"."0.1.23"."serde"}" deps)
-      (cratesIO.features_.serde_json."${deps."cargo_vendor"."0.1.23"."serde_json"}" deps)
-      (cratesIO.features_.toml."${deps."cargo_vendor"."0.1.23"."toml"}" deps)
-    ];
-
-
-# end
-
-  };
-
-  cargo_vendor = crates.crates.cargo_vendor."0.1.23" deps;
-  __all = [ (cargo_vendor {}) ];
-  deps.adler32."1.0.3" = {};
-  deps.aho_corasick."0.7.3" = {
-    memchr = "2.2.0";
-  };
-  deps.ansi_term."0.11.0" = {
-    winapi = "0.3.7";
-  };
-  deps.atty."0.2.11" = {
-    termion = "1.5.1";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.autocfg."0.1.2" = {};
-  deps.backtrace."0.3.15" = {
-    cfg_if = "0.1.7";
-    rustc_demangle = "0.1.14";
-    autocfg = "0.1.2";
-    backtrace_sys = "0.1.28";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.backtrace_sys."0.1.28" = {
-    libc = "0.2.51";
-    cc = "1.0.35";
-  };
-  deps.bitflags."1.0.4" = {};
-  deps.bstr."0.1.2" = {
-    memchr = "2.2.0";
-  };
-  deps.build_const."0.2.1" = {};
-  deps.byteorder."1.3.1" = {};
-  deps.bytes."0.4.12" = {
-    byteorder = "1.3.1";
-    iovec = "0.1.2";
-  };
-  deps.bytesize."1.0.0" = {};
-  deps.cargo."0.35.0" = {
-    atty = "0.2.11";
-    byteorder = "1.3.1";
-    bytesize = "1.0.0";
-    clap = "2.33.0";
-    crates_io = "0.23.0";
-    crossbeam_utils = "0.6.5";
-    crypto_hash = "0.3.3";
-    curl = "0.4.21";
-    curl_sys = "0.4.18";
-    env_logger = "0.6.1";
-    failure = "0.1.5";
-    filetime = "0.2.4";
-    flate2 = "1.0.7";
-    fs2 = "0.4.3";
-    git2 = "0.8.0";
-    git2_curl = "0.9.0";
-    glob = "0.2.11";
-    hex = "0.3.2";
-    home = "0.3.4";
-    ignore = "0.4.7";
-    im_rc = "12.3.4";
-    jobserver = "0.1.13";
-    lazy_static = "1.3.0";
-    lazycell = "1.2.1";
-    libc = "0.2.51";
-    libgit2_sys = "0.7.11";
-    log = "0.4.6";
-    num_cpus = "1.10.0";
-    opener = "0.3.2";
-    rustc_workspace_hack = "1.0.0";
-    rustfix = "0.4.5";
-    same_file = "1.0.4";
-    semver = "0.9.0";
-    serde = "1.0.90";
-    serde_ignored = "0.0.4";
-    serde_json = "1.0.39";
-    shell_escape = "0.1.4";
-    tar = "0.4.22";
-    tempfile = "3.0.7";
-    termcolor = "1.0.4";
-    toml = "0.4.10";
-    unicode_width = "0.1.5";
-    url = "1.7.2";
-    url_serde = "0.2.0";
-    core_foundation = "0.6.4";
-    fwdansi = "1.0.1";
-    miow = "0.3.3";
-    winapi = "0.3.7";
-  };
-  deps.cargo_vendor."0.1.23" = {
-    cargo = "0.35.0";
-    docopt = "1.1.0";
-    env_logger = "0.6.1";
-    failure = "0.1.5";
-    openssl = "0.10.20";
-    serde = "1.0.90";
-    serde_json = "1.0.39";
-    toml = "0.5.0";
-  };
-  deps.cc."1.0.35" = {};
-  deps.cfg_if."0.1.7" = {};
-  deps.clap."2.33.0" = {
-    atty = "0.2.11";
-    bitflags = "1.0.4";
-    strsim = "0.8.0";
-    textwrap = "0.11.0";
-    unicode_width = "0.1.5";
-    vec_map = "0.8.1";
-    ansi_term = "0.11.0";
-  };
-  deps.cloudabi."0.0.3" = {
-    bitflags = "1.0.4";
-  };
-  deps.commoncrypto."0.2.0" = {
-    commoncrypto_sys = "0.2.0";
-  };
-  deps.commoncrypto_sys."0.2.0" = {
-    libc = "0.2.51";
-  };
-  deps.core_foundation."0.6.4" = {
-    core_foundation_sys = "0.6.2";
-    libc = "0.2.51";
-  };
-  deps.core_foundation_sys."0.6.2" = {};
-  deps.crates_io."0.23.0" = {
-    curl = "0.4.21";
-    failure = "0.1.5";
-    http = "0.1.17";
-    serde = "1.0.90";
-    serde_derive = "1.0.90";
-    serde_json = "1.0.39";
-    url = "1.7.2";
-  };
-  deps.crc."1.8.1" = {
-    build_const = "0.2.1";
-  };
-  deps.crc32fast."1.2.0" = {
-    cfg_if = "0.1.7";
-  };
-  deps.crossbeam_channel."0.3.8" = {
-    crossbeam_utils = "0.6.5";
-    smallvec = "0.6.9";
-  };
-  deps.crossbeam_utils."0.6.5" = {
-    cfg_if = "0.1.7";
-    lazy_static = "1.3.0";
-  };
-  deps.crypto_hash."0.3.3" = {
-    hex = "0.3.2";
-    commoncrypto = "0.2.0";
-    openssl = "0.10.20";
-    winapi = "0.3.7";
-  };
-  deps.curl."0.4.21" = {
-    curl_sys = "0.4.18";
-    libc = "0.2.51";
-    socket2 = "0.3.8";
-    openssl_probe = "0.1.2";
-    openssl_sys = "0.9.43";
-    kernel32_sys = "0.2.2";
-    schannel = "0.1.15";
-    winapi = "0.2.8";
-  };
-  deps.curl_sys."0.4.18" = {
-    libc = "0.2.51";
-    libnghttp2_sys = "0.1.1";
-    libz_sys = "1.0.25";
-    cc = "1.0.35";
-    pkg_config = "0.3.14";
-    openssl_sys = "0.9.43";
-    winapi = "0.3.7";
-  };
-  deps.docopt."1.1.0" = {
-    lazy_static = "1.3.0";
-    regex = "1.1.6";
-    serde = "1.0.90";
-    strsim = "0.9.1";
-  };
-  deps.either."1.5.2" = {};
-  deps.env_logger."0.6.1" = {
-    atty = "0.2.11";
-    humantime = "1.2.0";
-    log = "0.4.6";
-    regex = "1.1.6";
-    termcolor = "1.0.4";
-  };
-  deps.failure."0.1.5" = {
-    backtrace = "0.3.15";
-    failure_derive = "0.1.5";
-  };
-  deps.failure_derive."0.1.5" = {
-    proc_macro2 = "0.4.27";
-    quote = "0.6.12";
-    syn = "0.15.32";
-    synstructure = "0.10.1";
-  };
-  deps.filetime."0.2.4" = {
-    cfg_if = "0.1.7";
-    redox_syscall = "0.1.54";
-    libc = "0.2.51";
-  };
-  deps.flate2."1.0.7" = {
-    crc32fast = "1.2.0";
-    libc = "0.2.51";
-    libz_sys = "1.0.25";
-    miniz_sys = "0.1.11";
-    miniz_oxide_c_api = "0.2.1";
-  };
-  deps.fnv."1.0.6" = {};
-  deps.foreign_types."0.3.2" = {
-    foreign_types_shared = "0.1.1";
-  };
-  deps.foreign_types_shared."0.1.1" = {};
-  deps.fs2."0.4.3" = {
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.fuchsia_cprng."0.1.1" = {};
-  deps.fwdansi."1.0.1" = {
-    memchr = "2.2.0";
-    termcolor = "1.0.4";
-  };
-  deps.git2."0.8.0" = {
-    bitflags = "1.0.4";
-    libc = "0.2.51";
-    libgit2_sys = "0.7.11";
-    log = "0.4.6";
-    url = "1.7.2";
-    openssl_probe = "0.1.2";
-    openssl_sys = "0.9.43";
-  };
-  deps.git2_curl."0.9.0" = {
-    curl = "0.4.21";
-    git2 = "0.8.0";
-    log = "0.4.6";
-    url = "1.7.2";
-  };
-  deps.glob."0.2.11" = {};
-  deps.globset."0.4.3" = {
-    aho_corasick = "0.7.3";
-    bstr = "0.1.2";
-    fnv = "1.0.6";
-    log = "0.4.6";
-    regex = "1.1.6";
-  };
-  deps.hashbrown."0.1.8" = {
-    byteorder = "1.3.1";
-    scopeguard = "0.3.3";
-  };
-  deps.hex."0.3.2" = {};
-  deps.home."0.3.4" = {
-    scopeguard = "0.3.3";
-    winapi = "0.3.7";
-  };
-  deps.http."0.1.17" = {
-    bytes = "0.4.12";
-    fnv = "1.0.6";
-    itoa = "0.4.3";
-  };
-  deps.humantime."1.2.0" = {
-    quick_error = "1.2.2";
-  };
-  deps.idna."0.1.5" = {
-    matches = "0.1.8";
-    unicode_bidi = "0.3.4";
-    unicode_normalization = "0.1.8";
-  };
-  deps.ignore."0.4.7" = {
-    crossbeam_channel = "0.3.8";
-    globset = "0.4.3";
-    lazy_static = "1.3.0";
-    log = "0.4.6";
-    memchr = "2.2.0";
-    regex = "1.1.6";
-    same_file = "1.0.4";
-    thread_local = "0.3.6";
-    walkdir = "2.2.7";
-    winapi_util = "0.1.2";
-  };
-  deps.im_rc."12.3.4" = {
-    sized_chunks = "0.1.3";
-    typenum = "1.10.0";
-    rustc_version = "0.2.3";
-  };
-  deps.iovec."0.1.2" = {
-    libc = "0.2.51";
-    winapi = "0.2.8";
-  };
-  deps.itertools."0.7.11" = {
-    either = "1.5.2";
-  };
-  deps.itoa."0.4.3" = {};
-  deps.jobserver."0.1.13" = {
-    log = "0.4.6";
-    libc = "0.2.51";
-    rand = "0.6.5";
-  };
-  deps.kernel32_sys."0.2.2" = {
-    winapi = "0.2.8";
-    winapi_build = "0.1.1";
-  };
-  deps.lazy_static."1.3.0" = {};
-  deps.lazycell."1.2.1" = {};
-  deps.libc."0.2.51" = {};
-  deps.libgit2_sys."0.7.11" = {
-    curl_sys = "0.4.18";
-    libc = "0.2.51";
-    libssh2_sys = "0.2.11";
-    libz_sys = "1.0.25";
-    cc = "1.0.35";
-    pkg_config = "0.3.14";
-    openssl_sys = "0.9.43";
-  };
-  deps.libnghttp2_sys."0.1.1" = {
-    libc = "0.2.51";
-    cc = "1.0.35";
-  };
-  deps.libssh2_sys."0.2.11" = {
-    libc = "0.2.51";
-    libz_sys = "1.0.25";
-    cc = "1.0.35";
-    pkg_config = "0.3.14";
-    openssl_sys = "0.9.43";
-  };
-  deps.libz_sys."1.0.25" = {
-    libc = "0.2.51";
-    cc = "1.0.35";
-    pkg_config = "0.3.14";
-  };
-  deps.lock_api."0.1.5" = {
-    scopeguard = "0.3.3";
-  };
-  deps.log."0.4.6" = {
-    cfg_if = "0.1.7";
-  };
-  deps.matches."0.1.8" = {};
-  deps.matrixmultiply."0.1.15" = {
-    rawpointer = "0.1.0";
-  };
-  deps.memchr."2.2.0" = {};
-  deps.miniz_sys."0.1.11" = {
-    libc = "0.2.51";
-    cc = "1.0.35";
-  };
-  deps.miniz_oxide."0.2.1" = {
-    adler32 = "1.0.3";
-  };
-  deps.miniz_oxide_c_api."0.2.1" = {
-    crc = "1.8.1";
-    libc = "0.2.51";
-    miniz_oxide = "0.2.1";
-    cc = "1.0.35";
-  };
-  deps.miow."0.3.3" = {
-    socket2 = "0.3.8";
-    winapi = "0.3.7";
-  };
-  deps.ndarray."0.12.1" = {
-    itertools = "0.7.11";
-    matrixmultiply = "0.1.15";
-    num_complex = "0.2.1";
-    num_traits = "0.2.6";
-  };
-  deps.num_complex."0.2.1" = {
-    num_traits = "0.2.6";
-  };
-  deps.num_traits."0.2.6" = {};
-  deps.num_cpus."1.10.0" = {
-    libc = "0.2.51";
-  };
-  deps.once_cell."0.1.8" = {
-    parking_lot = "0.7.1";
-  };
-  deps.opener."0.3.2" = {
-    failure = "0.1.5";
-    failure_derive = "0.1.5";
-    winapi = "0.3.7";
-  };
-  deps.openssl."0.10.20" = {
-    bitflags = "1.0.4";
-    cfg_if = "0.1.7";
-    foreign_types = "0.3.2";
-    lazy_static = "1.3.0";
-    libc = "0.2.51";
-    openssl_sys = "0.9.43";
-  };
-  deps.openssl_probe."0.1.2" = {};
-  deps.openssl_src."111.2.1+1.1.1b" = {
-    cc = "1.0.35";
-  };
-  deps.openssl_sys."0.9.43" = {
-    libc = "0.2.51";
-    cc = "1.0.35";
-    openssl_src = "111.2.1+1.1.1b";
-    pkg_config = "0.3.14";
-    rustc_version = "0.2.3";
-  };
-  deps.parking_lot."0.7.1" = {
-    lock_api = "0.1.5";
-    parking_lot_core = "0.4.0";
-  };
-  deps.parking_lot_core."0.4.0" = {
-    rand = "0.6.5";
-    smallvec = "0.6.9";
-    rustc_version = "0.2.3";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.percent_encoding."1.0.1" = {};
-  deps.pkg_config."0.3.14" = {};
-  deps.proc_macro2."0.4.27" = {
-    unicode_xid = "0.1.0";
-  };
-  deps.quick_error."1.2.2" = {};
-  deps.quote."0.6.12" = {
-    proc_macro2 = "0.4.27";
-  };
-  deps.rand."0.6.5" = {
-    rand_chacha = "0.1.1";
-    rand_core = "0.4.0";
-    rand_hc = "0.1.0";
-    rand_isaac = "0.1.1";
-    rand_jitter = "0.1.3";
-    rand_os = "0.1.3";
-    rand_pcg = "0.1.2";
-    rand_xorshift = "0.1.1";
-    autocfg = "0.1.2";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.rand_chacha."0.1.1" = {
-    rand_core = "0.3.1";
-    autocfg = "0.1.2";
-  };
-  deps.rand_core."0.3.1" = {
-    rand_core = "0.4.0";
-  };
-  deps.rand_core."0.4.0" = {};
-  deps.rand_hc."0.1.0" = {
-    rand_core = "0.3.1";
-  };
-  deps.rand_isaac."0.1.1" = {
-    rand_core = "0.3.1";
-  };
-  deps.rand_jitter."0.1.3" = {
-    rand_core = "0.4.0";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.rand_os."0.1.3" = {
-    rand_core = "0.4.0";
-    rdrand = "0.4.0";
-    cloudabi = "0.0.3";
-    fuchsia_cprng = "0.1.1";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.rand_pcg."0.1.2" = {
-    rand_core = "0.4.0";
-    autocfg = "0.1.2";
-  };
-  deps.rand_xorshift."0.1.1" = {
-    rand_core = "0.3.1";
-  };
-  deps.rawpointer."0.1.0" = {};
-  deps.rdrand."0.4.0" = {
-    rand_core = "0.3.1";
-  };
-  deps.redox_syscall."0.1.54" = {};
-  deps.redox_termios."0.1.1" = {
-    redox_syscall = "0.1.54";
-  };
-  deps.regex."1.1.6" = {
-    aho_corasick = "0.7.3";
-    memchr = "2.2.0";
-    regex_syntax = "0.6.6";
-    thread_local = "0.3.6";
-    utf8_ranges = "1.0.2";
-  };
-  deps.regex_syntax."0.6.6" = {
-    ucd_util = "0.1.3";
-  };
-  deps.remove_dir_all."0.5.1" = {
-    winapi = "0.3.7";
-  };
-  deps.rustc_demangle."0.1.14" = {};
-  deps.rustc_workspace_hack."1.0.0" = {};
-  deps.rustc_version."0.2.3" = {
-    semver = "0.9.0";
-  };
-  deps.rustfix."0.4.5" = {
-    failure = "0.1.5";
-    log = "0.4.6";
-    serde = "1.0.90";
-    serde_derive = "1.0.90";
-    serde_json = "1.0.39";
-  };
-  deps.ryu."0.2.7" = {};
-  deps.same_file."1.0.4" = {
-    winapi_util = "0.1.2";
-  };
-  deps.schannel."0.1.15" = {
-    lazy_static = "1.3.0";
-    winapi = "0.3.7";
-  };
-  deps.scopeguard."0.3.3" = {};
-  deps.semver."0.9.0" = {
-    semver_parser = "0.7.0";
-    serde = "1.0.90";
-  };
-  deps.semver_parser."0.7.0" = {};
-  deps.serde."1.0.90" = {
-    serde_derive = "1.0.90";
-  };
-  deps.serde_derive."1.0.90" = {
-    proc_macro2 = "0.4.27";
-    quote = "0.6.12";
-    syn = "0.15.32";
-  };
-  deps.serde_ignored."0.0.4" = {
-    serde = "1.0.90";
-  };
-  deps.serde_json."1.0.39" = {
-    itoa = "0.4.3";
-    ryu = "0.2.7";
-    serde = "1.0.90";
-  };
-  deps.shell_escape."0.1.4" = {};
-  deps.sized_chunks."0.1.3" = {
-    typenum = "1.10.0";
-  };
-  deps.smallvec."0.6.9" = {};
-  deps.socket2."0.3.8" = {
-    cfg_if = "0.1.7";
-    libc = "0.2.51";
-    redox_syscall = "0.1.54";
-    winapi = "0.3.7";
-  };
-  deps.strsim."0.8.0" = {};
-  deps.strsim."0.9.1" = {
-    hashbrown = "0.1.8";
-    ndarray = "0.12.1";
-  };
-  deps.syn."0.15.32" = {
-    proc_macro2 = "0.4.27";
-    quote = "0.6.12";
-    unicode_xid = "0.1.0";
-  };
-  deps.synstructure."0.10.1" = {
-    proc_macro2 = "0.4.27";
-    quote = "0.6.12";
-    syn = "0.15.32";
-    unicode_xid = "0.1.0";
-  };
-  deps.tar."0.4.22" = {
-    filetime = "0.2.4";
-    redox_syscall = "0.1.54";
-    libc = "0.2.51";
-  };
-  deps.tempfile."3.0.7" = {
-    cfg_if = "0.1.7";
-    rand = "0.6.5";
-    remove_dir_all = "0.5.1";
-    redox_syscall = "0.1.54";
-    libc = "0.2.51";
-    winapi = "0.3.7";
-  };
-  deps.termcolor."1.0.4" = {
-    wincolor = "1.0.1";
-  };
-  deps.termion."1.5.1" = {
-    libc = "0.2.51";
-    redox_syscall = "0.1.54";
-    redox_termios = "0.1.1";
-  };
-  deps.textwrap."0.11.0" = {
-    unicode_width = "0.1.5";
-  };
-  deps.thread_local."0.3.6" = {
-    lazy_static = "1.3.0";
-  };
-  deps.toml."0.4.10" = {
-    serde = "1.0.90";
-  };
-  deps.toml."0.5.0" = {
-    serde = "1.0.90";
-  };
-  deps.typenum."1.10.0" = {};
-  deps.ucd_util."0.1.3" = {};
-  deps.unicode_bidi."0.3.4" = {
-    matches = "0.1.8";
-  };
-  deps.unicode_normalization."0.1.8" = {
-    smallvec = "0.6.9";
-  };
-  deps.unicode_width."0.1.5" = {};
-  deps.unicode_xid."0.1.0" = {};
-  deps.url."1.7.2" = {
-    idna = "0.1.5";
-    matches = "0.1.8";
-    percent_encoding = "1.0.1";
-  };
-  deps.url_serde."0.2.0" = {
-    serde = "1.0.90";
-    url = "1.7.2";
-  };
-  deps.utf8_ranges."1.0.2" = {};
-  deps.vcpkg."0.2.6" = {};
-  deps.vec_map."0.8.1" = {};
-  deps.walkdir."2.2.7" = {
-    same_file = "1.0.4";
-    winapi = "0.3.7";
-    winapi_util = "0.1.2";
-  };
-  deps.winapi."0.2.8" = {};
-  deps.winapi."0.3.7" = {
-    winapi_i686_pc_windows_gnu = "0.4.0";
-    winapi_x86_64_pc_windows_gnu = "0.4.0";
-  };
-  deps.winapi_build."0.1.1" = {};
-  deps.winapi_i686_pc_windows_gnu."0.4.0" = {};
-  deps.winapi_util."0.1.2" = {
-    winapi = "0.3.7";
-  };
-  deps.winapi_x86_64_pc_windows_gnu."0.4.0" = {};
-  deps.wincolor."1.0.1" = {
-    winapi = "0.3.7";
-    winapi_util = "0.1.2";
-  };
-}

artiq-fast/pkgs/rust/cargo-vendor.nix

@@ -1,10 +0,0 @@
-{ callPackage, fetchFromGitHub }:
-
-((callPackage ./cargo-vendor-carnix.nix {}).cargo_vendor {}).overrideAttrs (attrs: {
-  src = fetchFromGitHub {
-    owner = "alexcrichton";
-    repo = "cargo-vendor";
-    rev = "9355661303ce2870d68a69d99953fce22581e31e";
-    sha256 = "0d4j3r09am3ynwhczimzv39264f5xz37jxa9js123y46w5by3wd2";
-  };
-})

artiq-fast/pkgs/rust/cargo.nix

@@ -1,62 +0,0 @@
-{ stdenv, file, curl, pkgconfig, python, openssl, cmake, zlib
-, makeWrapper, libiconv, cacert, rustPlatform, rustc, libgit2
-, fetchurl
-}:
-
-rustPlatform.buildRustPackage rec {
-  # Note: we can't build cargo 1.28.0 because rustc tightened the borrow checker rules and broke
-  # backward compatibility, which affects old cargo versions.
-  # There are also issues with asm/llvm_asm with recent rustc and cargo versions prior to 1.39.
-  pname = "cargo";
-  version = "1.39.0";
-  src = fetchurl {
-    url = "https://static.rust-lang.org/dist/rustc-1.39.0-src.tar.gz";
-    sha256 = "0mwkc1bnil2cfyf6nglpvbn2y0zfbv44zfhsd5qg4c9rm6vgd8dl";
-  };
-
-  # the rust source tarball already has all the dependencies vendored, no need to fetch them again
-  cargoVendorDir = "vendor";
-  preBuild = "pushd src/tools/cargo";
-  postBuild = "popd";
-
-  passthru.rustc = rustc;
-
-  # changes hash of vendor directory otherwise
-  dontUpdateAutotoolsGnuConfigScripts = true;
-
-  nativeBuildInputs = [ pkgconfig cmake makeWrapper ];
-  buildInputs = [ cacert file curl python openssl zlib libgit2 ];
-
-  LIBGIT2_SYS_USE_PKG_CONFIG = 1;
-
-  # fixes: the cargo feature `edition` requires a nightly version of Cargo, but this is the `stable` channel
-  RUSTC_BOOTSTRAP = 1;
-
-  postInstall = ''
-    # NOTE: We override the `http.cainfo` option usually specified in
-    # `.cargo/config`. This is an issue when users want to specify
-    # their own certificate chain as environment variables take
-    # precedence
-    wrapProgram "$out/bin/cargo" \
-      --suffix PATH : "${rustc}/bin" \
-      --set CARGO_HTTP_CAINFO "${cacert}/etc/ssl/certs/ca-bundle.crt" \
-      --set SSL_CERT_FILE "${cacert}/etc/ssl/certs/ca-bundle.crt"
-  '';
-
-  checkPhase = ''
-    # Disable cross compilation tests
-    export CFG_DISABLE_CROSS_TESTS=1
-    cargo test
-  '';
-
-  # Disable check phase as there are failures (4 tests fail)
-  doCheck = false;
-
-  meta = with stdenv.lib; {
-    homepage = https://crates.io;
-    description = "Downloads your Rust project's dependencies and builds your project";
-    maintainers = with maintainers; [ wizeman retrry ];
-    license = [ licenses.mit licenses.asl20 ];
-    platforms = platforms.unix;
-  };
-}

artiq-fast/pkgs/rust/patches/disable-test-inherit-env.patch

@@ -1,10 +0,0 @@
---- rustc-1.26.2-src.org/src/libstd/process.rs	2018-06-01 21:40:11.000000000 +0100
-+++ rustc-1.26.2-src/src/libstd/process.rs	2018-06-08 07:50:23.023828658 +0100
-@@ -1745,6 +1745,7 @@
-     }
- 
-     #[test]
-+    #[ignore]
-     fn test_inherit_env() {
-         use env;
- 

artiq-fast/pkgs/rust/patches/net-tcp-disable-tests.patch

@@ -1,104 +0,0 @@
-diff --git a/src/libstd/net/tcp.rs b/src/libstd/net/tcp.rs
-index 0f60b5b3e..9b08415e7 100644
---- a/src/libstd/net/tcp.rs
-+++ b/src/libstd/net/tcp.rs
-@@ -962,6 +962,7 @@ mod tests {
-         }
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn listen_localhost() {
-         let socket_addr = next_test_ip4();
-@@ -1020,6 +1021,7 @@ mod tests {
-         })
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn read_eof() {
-         each_ip(&mut |addr| {
-@@ -1039,6 +1041,7 @@ mod tests {
-         })
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn write_close() {
-         each_ip(&mut |addr| {
-@@ -1065,6 +1068,7 @@ mod tests {
-         })
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn multiple_connect_serial() {
-         each_ip(&mut |addr| {
-@@ -1087,6 +1091,7 @@ mod tests {
-         })
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn multiple_connect_interleaved_greedy_schedule() {
-         const MAX: usize = 10;
-@@ -1123,6 +1128,7 @@ mod tests {
-     }
- 
-     #[test]
-+    #[cfg_attr(target_os = "macos", ignore)]
-     fn multiple_connect_interleaved_lazy_schedule() {
-         const MAX: usize = 10;
-         each_ip(&mut |addr| {
-@@ -1401,6 +1407,7 @@ mod tests {
-     }
- 
-     #[test]
-+    #[cfg_attr(target_os = "macos", ignore)]
-     fn clone_while_reading() {
-         each_ip(&mut |addr| {
-             let accept = t!(TcpListener::bind(&addr));
-@@ -1421,7 +1422,10 @@ mod tests {
- 
-     // FIXME: re-enabled bitrig/openbsd tests once their socket timeout code
-     //        no longer has rounding errors.
--    #[cfg_attr(any(target_os = "bitrig", target_os = "netbsd", target_os = "openbsd"), ignore)]
-+    #[cfg_attr(any(target_os = "bitrig",
-+                   target_os = "netbsd",
-+                   target_os = "openbsd",
-+                   target_os = "macos"), ignore)]
-     #[test]
-     fn timeouts() {
-         let addr = next_test_ip4();
-@@ -1596,6 +1603,7 @@ mod tests {
-         drop(listener);
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn nodelay() {
-         let addr = next_test_ip4();
-@@ -1610,6 +1618,7 @@ mod tests {
-         assert_eq!(false, t!(stream.nodelay()));
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn ttl() {
-         let ttl = 100;
-@@ -1647,6 +1656,7 @@ mod tests {
-         }
-     }
- 
-+    #[cfg_attr(target_os = "macos", ignore)]
-     #[test]
-     fn peek() {
-         each_ip(&mut |addr| {
-@@ -1679,6 +1689,7 @@ mod tests {
-     }
- 
-     #[test]
-+    #[cfg_attr(any(target_os = "linux", target_os = "macos"), ignore)]
-     fn connect_timeout_unroutable() {
-         // this IP is unroutable, so connections should always time out,
-         // provided the network is reachable to begin with.

artiq-fast/pkgs/rust/patches/stdsimd-disable-doctest.patch

@@ -1,20 +0,0 @@
-diff --git a/src/stdsimd/coresimd/x86/mod.rs b/src/stdsimd/coresimd/x86/mod.rs
-index 32915c332..7cb54f31e 100644
---- a/src/stdsimd/coresimd/x86/mod.rs
-+++ b/src/stdsimd/coresimd/x86/mod.rs
-@@ -279,7 +279,6 @@ types! {
-     ///
-     /// # Examples
-     ///
--    /// ```
-     /// # #![feature(cfg_target_feature, target_feature, stdsimd)]
-     /// # #![cfg_attr(not(dox), no_std)]
-     /// # #[cfg(not(dox))]
-@@ -301,7 +300,6 @@ types! {
-     /// # }
-     /// # if is_x86_feature_detected!("sse") { unsafe { foo() } }
-     /// # }
--    /// ```
-     pub struct __m256(f32, f32, f32, f32, f32, f32, f32, f32);
- 
-     /// 256-bit wide set of four `f64` types, x86-specific

artiq-fast/pkgs/rust/print-hashes.sh

@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-# All rust-related downloads can be found at
-# https://static.rust-lang.org/dist/index.html.  To find the date on
-# which a particular thing was last updated, look for the *-date.txt
-# file, e.g.
-# https://static.rust-lang.org/dist/channel-rust-beta-date.txt
-
-PLATFORMS=(
-  i686-unknown-linux-gnu
-  x86_64-unknown-linux-gnu
-  armv7-unknown-linux-gnueabihf
-  aarch64-unknown-linux-gnu
-  i686-apple-darwin
-  x86_64-apple-darwin
-)
-BASEURL=https://static.rust-lang.org/dist
-VERSION=${1:-}
-DATE=${2:-}
-
-if [[ -z $VERSION ]]
-then
-    echo "No version supplied"
-    exit -1
-fi
-
-if [[ -n $DATE ]]
-then
-    BASEURL=$BASEURL/$DATE
-fi
-
-for PLATFORM in "${PLATFORMS[@]}"
-do
-    URL="$BASEURL/rust-$VERSION-$PLATFORM.tar.gz.sha256"
-    SHA256=$(curl -sSfL $URL | cut -d ' ' -f 1)
-    echo "$PLATFORM = \"$SHA256\";"
-done

artiq-fast/pkgs/rust/rustc-with-crates.nix

@@ -1,95 +0,0 @@
-{ stdenv, callPackage, recurseIntoAttrs, makeRustPlatform, llvm-or1k, fetchurl
-, targets ? []
-, targetToolchains ? []
-, targetPatches ? []
-, fetchFromGitHub
-, runCommand
-}:
-
-let
-  rustPlatform = recurseIntoAttrs (makeRustPlatform (callPackage ./bootstrap.nix {}));
-  version = "1.28.0";
-  src = fetchFromGitHub {
-    owner = "m-labs";
-    repo = "rust";
-    sha256 = "03lfps3xvvv7wv1nnwn3n1ji13z099vx8c3fpbzp9rnasrwzp5jy";
-    rev = "f305fb024318e96997fbe6e4a105b0cc1052aad4"; #  artiq-1.28.0 branch
-    fetchSubmodules = true;
-  };
-  rustc_internal = callPackage ./rustc.nix {
-    inherit stdenv llvm-or1k targets targetPatches targetToolchains rustPlatform version src;
-
-    patches = [
-      ./patches/net-tcp-disable-tests.patch
-
-      # Re-evaluate if this we need to disable this one
-      #./patches/stdsimd-disable-doctest.patch
-
-      # Fails on hydra - not locally; the exact reason is unknown.
-      # Comments in the test suggest that some non-reproducible environment
-      # variables such $RANDOM can make it fail.
-      ./patches/disable-test-inherit-env.patch
-    ];
-
-    #configureFlags = [ "--release-channel=stable" ];
-
-    # 1. Upstream is not running tests on aarch64:
-    # see https://github.com/rust-lang/rust/issues/49807#issuecomment-380860567
-    # So we do the same.
-    # 2. Tests run out of memory for i686
-    #doCheck = !stdenv.isAarch64 && !stdenv.isi686;
-
-    # Disabled for now; see https://github.com/NixOS/nixpkgs/pull/42348#issuecomment-402115598.
-    doCheck = false;
-  };
-  or1k-crates = stdenv.mkDerivation {
-    name = "or1k-crates";
-    inherit src;
-    phases = [ "unpackPhase" "buildPhase" ];
-    buildPhase = ''
-      destdir=$out
-      rustc="${rustc_internal}/bin/rustc --out-dir ''${destdir} -L ''${destdir} --target or1k-unknown-none -g -C target-feature=+mul,+div,+ffl1,+cmov,+addc -C opt-level=s --crate-type rlib"
-      
-      mkdir -p ''${destdir}
-      ''${rustc} --crate-name core src/libcore/lib.rs
-      ''${rustc} --crate-name compiler_builtins src/libcompiler_builtins/src/lib.rs --cfg 'feature="compiler-builtins"' --cfg 'feature="mem"'
-      ''${rustc} --crate-name std_unicode src/libstd_unicode/lib.rs
-      ''${rustc} --crate-name alloc src/liballoc/lib.rs
-      ''${rustc} --crate-name libc src/liblibc_mini/lib.rs
-      ''${rustc} --crate-name unwind src/libunwind/lib.rs
-      ''${rustc} -Cpanic=abort --crate-name panic_abort src/libpanic_abort/lib.rs
-      ''${rustc} -Cpanic=unwind --crate-name panic_unwind src/libpanic_unwind/lib.rs --cfg llvm_libunwind
-    '';
-  };
-  arm-crates = stdenv.mkDerivation {
-    name = "arm-crates";
-    inherit src;
-    phases = [ "unpackPhase" "buildPhase" ];
-    buildPhase = ''
-      destdir=$out
-      rustc="${rustc_internal}/bin/rustc --out-dir ''${destdir} -L ''${destdir} --target armv7-unknown-linux-gnueabihf -g -C target-feature=+dsp,+fp16,+neon,+vfp3 -C opt-level=s --crate-type rlib"
-
-      mkdir -p ''${destdir}
-      ''${rustc} --crate-name core src/libcore/lib.rs
-      ''${rustc} --crate-name compiler_builtins src/libcompiler_builtins/src/lib.rs --cfg 'feature="compiler-builtins"' --cfg 'feature="mem"'
-      ''${rustc} --crate-name std_unicode src/libstd_unicode/lib.rs
-      ''${rustc} --crate-name alloc src/liballoc/lib.rs
-      ''${rustc} --crate-name libc src/liblibc_mini/lib.rs
-      ''${rustc} --crate-name unwind src/libunwind/lib.rs
-      ''${rustc} -Cpanic=abort --crate-name panic_abort src/libpanic_abort/lib.rs
-      ''${rustc} -Cpanic=unwind --crate-name panic_unwind src/libpanic_unwind/lib.rs --cfg llvm_libunwind
-    '';
-  };
-in
-  stdenv.mkDerivation {
-    name = "rustc";
-    inherit src version;
-    buildCommand = ''
-      mkdir -p $out/lib/rustlib/or1k-unknown-none/lib/
-      cp -r ${or1k-crates}/* $out/lib/rustlib/or1k-unknown-none/lib/
-      mkdir -p $out/lib/rustlib/armv7-unknown-linux-gnueabihf/lib/
-      cp -r ${arm-crates}/* $out/lib/rustlib/armv7-unknown-linux-gnueabihf/lib/
-      cp -r ${rustc_internal}/* $out
-      '';
-    passAsFile = [ "buildCommand" ];
-  }

artiq-fast/pkgs/rust/rustc.nix

@@ -1,182 +0,0 @@
-{ stdenv, targetPackages
-, fetchurl, file, python2, tzdata, ps
-, llvm-or1k, ncurses, zlib, darwin, rustPlatform, git, cmake, curl
-, which, libffi, gdb
-, version
-, src
-, configureFlags ? []
-, patches
-, targets
-, targetPatches
-, targetToolchains
-, doCheck ? true
-, broken ? false
-}:
-
-let
-  inherit (stdenv.lib) optional optionalString;
-  inherit (darwin.apple_sdk.frameworks) Security;
-
-  target = builtins.replaceStrings [" "] [","] (builtins.toString targets);
-  src_rustc = fetchurl {
-    url = "https://static.rust-lang.org/dist/rustc-1.28.0-src.tar.gz";
-    sha256 = "11k4rn77bca2rikykkk9fmprrgjswd4x4kaq7fia08vgkir82nhx";
-  };
-
-in
-
-stdenv.mkDerivation {
-  pname = "rustc";
-  inherit version;
-
-  inherit src;
-
-  __darwinAllowLocalNetworking = true;
-
-  # rustc complains about modified source files otherwise
-  dontUpdateAutotoolsGnuConfigScripts = true;
-
-  # Running the default `strip -S` command on Darwin corrupts the
-  # .rlib files in "lib/".
-  #
-  # See https://github.com/NixOS/nixpkgs/pull/34227
-  stripDebugList = if stdenv.isDarwin then [ "bin" ] else null;
-
-  NIX_LDFLAGS = optionalString stdenv.isDarwin "-rpath ${llvm-or1k}/lib";
-
-  # Enable nightly features in stable compiles (used for
-  # bootstrapping, see https://github.com/rust-lang/rust/pull/37265).
-  # This loosens the hard restrictions on bootstrapping-compiler
-  # versions.
-  RUSTC_BOOTSTRAP = "1";
-
-  # Increase codegen units to introduce parallelism within the compiler.
-  RUSTFLAGS = "-Ccodegen-units=10";
-
-  # We need rust to build rust. If we don't provide it, configure will try to download it.
-  # Reference: https://github.com/rust-lang/rust/blob/master/src/bootstrap/configure.py
-  configureFlags = configureFlags
-                ++ [ "--enable-local-rust" "--local-rust-root=${rustPlatform.rust.rustc}" "--enable-rpath" ]
-                ++ [ "--enable-vendor" ]
-                ++ [ "--default-linker=${targetPackages.stdenv.cc}/bin/cc" ]
-                ++ [ "--enable-llvm-link-shared" ]
-                ++ optional (targets != []) "--target=${target}"
-                ++ [ "--llvm-root=${llvm-or1k}" ] ;
-
-  # The bootstrap.py will generated a Makefile that then executes the build.
-  # The BOOTSTRAP_ARGS used by this Makefile must include all flags to pass
-  # to the bootstrap builder.
-  postConfigure = ''
-    substituteInPlace Makefile --replace 'BOOTSTRAP_ARGS :=' 'BOOTSTRAP_ARGS := --jobs $(NIX_BUILD_CORES)'
-  '';
-
-  # FIXME: qknight, readd deleted vendor folder from 1.28 rustc
-  preConfigure = ''
-    export HOME=$out
-    # HACK: we add the vendor folder from rustc 1.28 to make the compiling work
-    tar xf ${src_rustc}
-    mv rustc-1.28.0-src/src/vendor/ src/vendor
-  '';
-
-  patches = patches ++ targetPatches;
-
-  # the rust build system complains that nix alters the checksums
-  dontFixLibtool = true;
-
-  passthru.target = target;
-
-  postPatch = ''
-    patchShebangs src/etc
-
-    # Fix the configure script to not require curl as we won't use it
-    sed -i configure \
-      -e '/probe_need CFG_CURL curl/d'
-
-    # Disable fragile tests.
-    rm -vr src/test/run-make/linker-output-non-utf8 || true
-    rm -vr src/test/run-make/issue-26092 || true
-
-    # Remove test targeted at LLVM 3.9 - https://github.com/rust-lang/rust/issues/36835
-    rm -vr src/test/run-pass/issue-36023.rs || true
-
-    # Disable test getting stuck on hydra - possible fix:
-    # https://reviews.llvm.org/rL281650
-    rm -vr src/test/run-pass/issue-36474.rs || true
-
-    # On Hydra: `TcpListener::bind(&addr)`: Address already in use (os error 98)'
-    sed '/^ *fn fast_rebind()/i#[ignore]' -i src/libstd/net/tcp.rs
-
-    # https://github.com/rust-lang/rust/issues/39522
-    echo removing gdb-version-sensitive tests...
-    find src/test/debuginfo -type f -execdir grep -q ignore-gdb-version '{}' \; -print -delete
-    rm src/test/debuginfo/{borrowed-c-style-enum.rs,c-style-enum-in-composite.rs,gdb-pretty-struct-and-enums-pre-gdb-7-7.rs,generic-enum-with-different-disr-sizes.rs}
-
-    # Useful debugging parameter
-    # export VERBOSE=1
-  '' + optionalString stdenv.isDarwin ''
-    # Disable all lldb tests.
-    # error: Can't run LLDB test because LLDB's python path is not set
-    rm -vr src/test/debuginfo/*
-    rm -v src/test/run-pass/backtrace-debuginfo.rs
-
-    # error: No such file or directory
-    rm -v src/test/run-pass/issue-45731.rs
-
-    # Disable tests that fail when sandboxing is enabled.
-    substituteInPlace src/libstd/sys/unix/ext/net.rs \
-        --replace '#[test]' '#[test] #[ignore]'
-    substituteInPlace src/test/run-pass/env-home-dir.rs \
-        --replace 'home_dir().is_some()' true
-    rm -v src/test/run-pass/fds-are-cloexec.rs  # FIXME: pipes?
-    rm -v src/test/run-pass/sync-send-in-std.rs  # FIXME: ???
-  '';
-
-  # rustc unfortunately need cmake for compiling llvm-rt but doesn't
-  # use it for the normal build. This disables cmake in Nix.
-  dontUseCmakeConfigure = true;
-
-  # ps is needed for one of the test cases
-  nativeBuildInputs =
-    [ file python2 ps rustPlatform.rust.rustc git cmake
-      which libffi
-    ]
-    # Only needed for the debuginfo tests
-    ++ optional (!stdenv.isDarwin) gdb;
-
-  buildInputs = [ ncurses zlib llvm-or1k ] ++ targetToolchains
-    ++ optional stdenv.isDarwin Security;
-
-  outputs = [ "out" "man" "doc" ];
-  setOutputFlags = false;
-
-  # Disable codegen units and hardening for the tests.
-  preCheck = ''
-    export RUSTFLAGS=
-    export TZDIR=${tzdata}/share/zoneinfo
-    export hardeningDisable=all
-  '' +
-  # Ensure TMPDIR is set, and disable a test that removing the HOME
-  # variable from the environment falls back to another home
-  # directory.
-  optionalString stdenv.isDarwin ''
-    export TMPDIR=/tmp
-    sed -i '28s/home_dir().is_some()/true/' ./src/test/run-pass/env-home-dir.rs
-  '';
-
-  inherit doCheck;
-
-  configurePlatforms = [];
-
-  # https://github.com/NixOS/nixpkgs/pull/21742#issuecomment-272305764
-  # https://github.com/rust-lang/rust/issues/30181
-  # enableParallelBuilding = false;
-
-  meta = with stdenv.lib; {
-    homepage = https://www.rust-lang.org/;
-    description = "A safe, concurrent, practical language";
-    maintainers = with maintainers; [ sb0 ];
-    license = [ licenses.mit licenses.asl20 ];
-    platforms = platforms.linux ++ platforms.darwin;
-    broken = broken;
-  };
-}

artiq-fast/shell-dev.nix

@@ -1,20 +0,0 @@
-{ pkgs ? import <nixpkgs> {}}:
-
-let
-  artiqpkgs = import ./default.nix { inherit pkgs; };
-  vivado = import ./vivado.nix { inherit pkgs; };
-in
-  pkgs.mkShell {
-    buildInputs = [
-      vivado
-      pkgs.gnumake
-      (pkgs.python3.withPackages(ps: (with ps; [ jinja2 jsonschema numpy paramiko ]) ++ (with artiqpkgs; [ migen microscope misoc jesd204b migen-axi artiq ])))
-      artiqpkgs.cargo
-      artiqpkgs.rustc
-      artiqpkgs.binutils-or1k
-      artiqpkgs.binutils-arm
-      artiqpkgs.llvm-or1k
-      artiqpkgs.openocd
-    ];
-    TARGET_AR="or1k-linux-ar";
-  }

artiq-fast/shell.nix

@@ -1,8 +0,0 @@
-{ pkgs ? import <nixpkgs> {}}:
-
-let 
-  artiqpkgs = import ./default.nix { inherit pkgs; };
-in
-  pkgs.mkShell {
-    buildInputs = [ (pkgs.python3.withPackages(ps: [artiqpkgs.artiq])) ];
-  }

artiq-fast/vivado.nix

@@ -1,24 +0,0 @@
-# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
-#  nix.sandboxPaths = ["/opt"];
-
-{ pkgs, vivadoPath ? "/opt/Xilinx/Vivado/2020.1" }:
-
-pkgs.buildFHSUserEnv {
-  name = "vivado";
-  targetPkgs = pkgs: (
-    with pkgs; [
-      ncurses5
-      zlib
-      libuuid
-      xorg.libSM
-      xorg.libICE
-      xorg.libXrender
-      xorg.libX11
-      xorg.libXext
-      xorg.libXtst
-      xorg.libXi
-    ]
-  );
-  profile = "source ${vivadoPath}/settings64.sh";
-  runScript = "vivado";
-}

artiq-fast/wfvm.nix

@@ -1,16 +0,0 @@
-{ pkgs }:
-
-let
-  # Pin nixpkgs to avoid frequent resource-intensive Windows reinstallations on Hydra.
-  wfvm-pkgs = pkgs.fetchFromGitHub {
-    owner = "NixOS";
-    repo = "nixpkgs";
-    rev = "f8248ab6d9e69ea9c07950d73d48807ec595e923";
-    sha256 = "009i9j6mbq6i481088jllblgdnci105b2q4mscprdawg3knlyahk";
-  };
-  wfvm = pkgs.fetchgit {
-    url = "https://git.m-labs.hk/M-Labs/wfvm.git";
-    rev = "4b497938ffd9fcddf84a3dbe2f01524395292adb";
-    sha256 = "0m3kdbbcskqc1lf8b5f7ccbll9b7vkl4r00kbyx3yjb2rs6cqvil";
-  };
-in import "${wfvm}/wfvm" { pkgs = (import wfvm-pkgs {}); }

artiq-fast/windows/conda_noarch_packages-legacy.nix

@@ -1,17 +0,0 @@
-{ pkgs } : [
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/noarch/prettytable-0.7.2-py_3.tar.bz2";
-  sha256 = "0b7s4xm6bbkcg37sf1i3mxrbac0vxhryq22m3qx4x9kh6k2c5g5q";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/pycparser-2.20-py_0.tar.bz2";
-  sha256 = "1qwcb07q8cjz0qpj6pfxb0qb68kddmx9bv9wr5pghwz78q8073z9";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/six-1.15.0-py_0.tar.bz2";
-  sha256 = "08rsfp9bd2mz8r120s8w5vgncy0gn732xa0lfgbmx833548cfqmb";
-})
-]

artiq-fast/windows/conda_noarch_packages.nix

@@ -1,27 +0,0 @@
-{ pkgs } : [
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/noarch/prettytable-0.7.2-py_3.tar.bz2";
-  sha256 = "0b7s4xm6bbkcg37sf1i3mxrbac0vxhryq22m3qx4x9kh6k2c5g5q";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/six-1.15.0-py_0.tar.bz2";
-  sha256 = "08rsfp9bd2mz8r120s8w5vgncy0gn732xa0lfgbmx833548cfqmb";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/python-dateutil-2.8.1-py_0.tar.bz2";
-  sha256 = "0cbcd0jq6683ibj8ncsmmrbhbjvwww8i22lb68bx4xfzsmb9z8cb";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/cached-property-1.5.1-py_1.tar.bz2";
-  sha256 = "1yl6h3wb6hxgw79i7rpgpq260l5vqfcj5dv5kyxn8z99xdkp52q5";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/noarch/pycparser-2.20-py_0.tar.bz2";
-  sha256 = "1qwcb07q8cjz0qpj6pfxb0qb68kddmx9bv9wr5pghwz78q8073z9";
-})
-]

artiq-fast/windows/conda_win-64_packages-legacy.nix

@@ -1,167 +0,0 @@
-{ pkgs } : [
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqt-5.9.2-py35h6538335_2.tar.bz2";
-  sha256 = "1anwq53nic50cijngxaylpn6232j9wdc2wz2rykqpgzvs1ms108s";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/zlib-1.2.11-h62dcd97_4.tar.bz2";
-  sha256 = "1jxd7sg0c278hqv09q6hridpdnyhkd34gbs92wkravj3gwsr1adk";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/openssl-1.1.1g-he774522_0.tar.bz2";
-  sha256 = "1gwfj33qb8inikdhmgcm30iz1ag8x71lzicsxbdr7ni4153df5gb";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_random-1.0.1-py35h77b88f5_1.tar.bz2";
-  sha256 = "0899qg9ih8srpw9q5mxd85hg4gpawb7lmz25x9xi401cfwhgwq7l";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/hdf5-1.10.2-hac2f561_1.tar.bz2";
-  sha256 = "0l1i5bpxl0bn9hf738ywygjwc32d4cq5fjkgzij3x27cxi8nvd21";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/tbb4py-2018.0.5-py35he980bc4_0.tar.bz2";
-  sha256 = "0gypjcmciw3rnd2cq0sqmvspgzaas13fghv633dqj8g3bvl4lfif";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/wheel-0.31.1-py35_0.tar.bz2";
-  sha256 = "07zmbg57lpvqd9nmahiff1mhzxmzchx1v128dcrj4iamymjcdlzf";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
-  sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/pygit2-0.27.1-py35hfa6e2cd_0.tar.bz2";
-  sha256 = "1jypm8vxs4j4yr37ai4ki9qsslv3wz6slklmisnvjraz1a4vzaf8";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/pip-10.0.1-py35_0.tar.bz2";
-  sha256 = "0zwlkfgnag1s64wbwdcg44zqj2dpfcq1g4b6dsk82q24j7fw40i3";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/h5py-2.8.0-py35h3bdd7fb_2.tar.bz2";
-  sha256 = "0743wrf51b2vs8ybasjpn7ricbh740r7drxcimkhbxp8r6vd66vp";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-1.15.2-py35ha559c80_0.tar.bz2";
-  sha256 = "1igf4gm726s4kg7km24flxdxr73fafaz3z18y3ndcb5f6r9zwa44";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl-2018.0.3-1.tar.bz2";
-  sha256 = "01pq0f2787q58avg5ylfrbpf4jlg2b6rbajvf3swjpm1cmzxkm81";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/libssh2-1.9.0-h7a1dbc1_1.tar.bz2";
-  sha256 = "0sz405ab3n7991hxy8l9affs1slivsimgadxsdr6wvpgx3j4aqgx";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/tk-8.6.10-he774522_0.tar.bz2";
-  sha256 = "15bfncacdxmcbn4xixmfz2m7a09k7hcpwxvwn1lki84bx0fmzsis";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/sqlite-3.32.2-h2a8f88b_0.tar.bz2";
-  sha256 = "086jjnxfchypkr8cp1q8nsis0jfvl293bv4bcg7ikv7aia3vda8p";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/wincertstore-0.2-py35hfebbdb8_0.tar.bz2";
-  sha256 = "1624bzqlbiq4jlz46l65574smw739p7l38ydzxmayq3jmwx6zaar";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/certifi-2018.8.24-py35_1.tar.bz2";
-  sha256 = "06ygpkx3f71rwmq9lgc29r6jj4g1zi8rvrmn4mrrsb9b5sf0rzgf";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/icu-58.2-ha925a31_3.tar.bz2";
-  sha256 = "0vcl0j3v9ab022s2g3a9iv1pn7sflh670yyf5m08hdyf049m3jz7";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/regex-2018.08.29-py35hfa6e2cd_0.tar.bz2";
-  sha256 = "16cjgwpaqnfy8bg35iz12bb9whpws4abiz4cq4shpnh6gnwpwzj3";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/cffi-1.11.5-py35h74b6da3_1.tar.bz2";
-  sha256 = "0nc3ps4xl8rqpwiqaqqr5lrqzk8lx1a4hh3fpm7i7rlppqn5pm6a";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/libcurl-7.69.1-h2a8f88b_0.tar.bz2";
-  sha256 = "182zrmgl2142gfgnbgjsk0gbj85vw75xzxvhn9lzm485ghxsasvg";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_fft-1.0.6-py35hdbbee80_0.tar.bz2";
-  sha256 = "0xb02rx28rjlp5clavg19jb129ihcarrkz46pncaar91qxckbbxz";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqtgraph-0.10.0-py35h28b3542_3.tar.bz2";
-  sha256 = "0ywzw3i4kf5ccck9whmg1j7s22x6i5fpywndy8rkr9va38g4nazq";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/sip-4.19.8-py35h6538335_0.tar.bz2";
-  sha256 = "1y761zpm6bi0pb61x1y26ap56hylh6mjg1xq9zl08bmcl2dlkwfy";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/setuptools-40.2.0-py35_0.tar.bz2";
-  sha256 = "146piyifnip1flqph19nxilnhfbzzsxlhfyx0i61wv7krr6ln9yy";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/python-levenshtein-0.12.0-py35_0.tar.bz2";
-  sha256 = "1rdpzv1y535swf17nm88chkp1m8w3wd3nwdy7jk1xfcnx1da5ss6";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/libgit2-0.27.8-hfac1375_0.tar.bz2";
-  sha256 = "05pjzwmm5vyxwcgi6vv3i961x3dgdd9c4b1ihagq9kyxgqfy21kd";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/scipy-1.1.0-py35h4f6bf74_1.tar.bz2";
-  sha256 = "0sdyj5nlycv4krz7f8rzhi0kxv302gpx65x1zwhj8dn6b2c50li0";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/curl-7.69.1-h2a8f88b_0.tar.bz2";
-  sha256 = "0hw5dh7gzx8fap4c3vkc2xc2q9by3f5ndbigr6pm6w5v29qaydn4";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/intel-openmp-2019.4-245.tar.bz2";
-  sha256 = "13qid5aagyxsfy5ng4bbwb7hs9jj29jvqbpvvkjiy6bgv36m8kr8";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-base-1.15.2-py35h8128ebf_0.tar.bz2";
-  sha256 = "166w4wkp9dwl505hc00hny1mq2mlvb169n7c9nws7dz8j36pqfrx";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/python-3.5.6-he025d50_0.tar.bz2";
-  sha256 = "0ygvmbyvhc2jisb5bzb0r5709qmn8392gr7rv6c8vrdiylfiqr73";
-})
-]

artiq-fast/windows/conda_win-64_packages.nix

@@ -1,132 +0,0 @@
-{ pkgs } : [
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/regex-2020.5.14-py37he774522_0.tar.bz2";
-  sha256 = "125l0ywc17h5hlpidjbr7dxyz9c24xmfjllj19dmvbx8hdlmvp99";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/python_abi-3.7-1_cp37m.tar.bz2";
-  sha256 = "04dllvrvczky7p7d82iqj7czmy5mm8w7h2gg0zpjzx0s09gkq09l";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/icu-58.2-ha925a31_3.tar.bz2";
-  sha256 = "0vcl0j3v9ab022s2g3a9iv1pn7sflh670yyf5m08hdyf049m3jz7";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/pip-20.1.1-py37_1.tar.bz2";
-  sha256 = "0wx0sdjq2kkdid4m0iss1bxjhpdk1lnrqsl3w7bqc0papz3gbx0a";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_fft-1.1.0-py37h45dec08_0.tar.bz2";
-  sha256 = "1v73rd107x1r77gv77cn2bv50hr15c0rwspzf7pdp93i5ydk7fm0";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/tk-8.6.10-he774522_0.tar.bz2";
-  sha256 = "15bfncacdxmcbn4xixmfz2m7a09k7hcpwxvwn1lki84bx0fmzsis";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/pygit2-1.2.1-py37h4ab8f01_0.tar.bz2";
-  sha256 = "1rj6bmf56g3imcrhfd67nqfzd5jjpnmbck714p6aqljxjw5x1zja";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/certifi-2020.6.20-py37_0.tar.bz2";
-  sha256 = "0601dwm5grhwnq7kvhz9sr49pw72ji8xbc28jc6z3pzihin243fy";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/libssh2-1.9.0-h7a1dbc1_1.tar.bz2";
-  sha256 = "0sz405ab3n7991hxy8l9affs1slivsimgadxsdr6wvpgx3j4aqgx";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/vs2015_runtime-14.16.27012-hf0eaf9b_2.tar.bz2";
-  sha256 = "1gbm6i6nkp8linmak5mm42hj1nzqd5ppak8kv1n3wfn52p21ngvs";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/intel-openmp-2020.1-216.tar.bz2";
-  sha256 = "097kkdpd27gc5v5fwsanbrpvmkqricbkd2igglz0yym0x2rldgb8";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/zlib-1.2.11-h62dcd97_4.tar.bz2";
-  sha256 = "1jxd7sg0c278hqv09q6hridpdnyhkd34gbs92wkravj3gwsr1adk";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/pyqtgraph-0.10.0-py37h28b3542_3.tar.bz2";
-  sha256 = "1vfxym7lpiv624ll82yp07v2906chdzvczjj9xbvfvk2sk0w1nk7";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/python-levenshtein-0.12.0-py37he774522_1001.tar.bz2";
-  sha256 = "0wgk6wi4hcc1msv6467y8rhd3zpxrlb6dc0a4fg5wrvzww9wh4dx";
-})
-
-(pkgs.fetchurl {
-  url = "https://conda.anaconda.org/conda-forge/win-64/libgit2-1.0.0-h79a9ecc_0.tar.bz2";
-  sha256 = "1pi4hd4kah49wzy00iml5wpbscc0lx6ljk6lwnx92gas5z8856jd";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/setuptools-47.3.1-py37_0.tar.bz2";
-  sha256 = "1lljknly57bh73h30hn6vv826dx4vls736psa9jvf0d6l2kqrzrq";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/libcurl-7.69.1-h2a8f88b_0.tar.bz2";
-  sha256 = "182zrmgl2142gfgnbgjsk0gbj85vw75xzxvhn9lzm485ghxsasvg";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl_random-1.1.1-py37h47e9c7a_0.tar.bz2";
-  sha256 = "1f85bd7rrzdprgmk83v1klana32j016128fkxk8kpk7idfd36zqv";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/python-3.7.7-h81c818b_4.tar.bz2";
-  sha256 = "092bv939n68yjkcm7q626nd6s5kqqvdrgjfqn1nadnqig612w2p9";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/curl-7.69.1-h2a8f88b_0.tar.bz2";
-  sha256 = "0hw5dh7gzx8fap4c3vkc2xc2q9by3f5ndbigr6pm6w5v29qaydn4";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/openssl-1.1.1g-he774522_0.tar.bz2";
-  sha256 = "1gwfj33qb8inikdhmgcm30iz1ag8x71lzicsxbdr7ni4153df5gb";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/scipy-1.5.0-py37h9439919_0.tar.bz2";
-  sha256 = "01pj0a82y9qd9z5fn5gv4argcc5g5s8kqj0lwjy9hj50qf6qwj76";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-1.18.5-py37h6530119_0.tar.bz2";
-  sha256 = "1knb5na7ij7ik76blsgwhdsy3i9r2l0154z5g5dkb2ds3sk878np";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/sqlite-3.32.3-h2a8f88b_0.tar.bz2";
-  sha256 = "1ddzwj0f6jikj6hsasg3vlwamsqhf5lc8k1la7gqbd77s11b8isc";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/numpy-base-1.18.5-py37hc3f5095_0.tar.bz2";
-  sha256 = "1dyxk2v7rm87najv3f8i04q44wxicfx9qrap9dy2vpqlrz3bj82j";
-})
-
-(pkgs.fetchurl {
-  url = "https://repo.anaconda.com/pkgs/main/win-64/mkl-2020.1-216.tar.bz2";
-  sha256 = "1klj0sjlj5x1anjbkf017f16ssc65dkpg1rrn06njirbhwsc9w5m";
-})
-]

artiq-fast/windows/make_conda_packages.sh

@@ -1,79 +0,0 @@
-#!/usr/bin/env bash
-
-# Run manually to build the list of conda dependencies to install in the
-# test environments.
-
-# NOTE: This procedure encounters failing HTTPS handshakes. To circumvent just
-# for testing, insert `call conda config --set ssl_verify no` into
-# getcondapackages.bat. To securely update the sources lists update the RTC
-# hack to the proper date instead.
-
-set -e
-
-nix-build -E "
-let
-  pkgs = import <nixpkgs> {};
-  wfvm = import ../wfvm.nix { inherit pkgs; };
-in
-  wfvm.utils.wfvm-run {
-    name = \"get-conda-packages\";
-    image = wfvm.makeWindowsImage { installCommands = [ wfvm.layers.anaconda3 ]; };
-    # TODO: fix wfvm login expiry and also remove 'date' workarounds below
-    #fakeRtc = false;
-    isolateNetwork = false;
-    script = ''
-      cat > getcondapackages.bat << EOF
-      date 06-22-20
-      call conda config --prepend channels https://conda.m-labs.hk/artiq-beta
-      call conda config --append channels conda-forge
-      call conda create -n artiq -y
-      call conda install --dry-run --json -n artiq artiq > packages.json
-      date 04-20-20
-      EOF
-      \${wfvm.utils.win-put}/bin/win-put getcondapackages.bat
-      \${wfvm.utils.win-exec}/bin/win-exec '.\Anaconda3\Scripts\activate && getcondapackages'
-      \${wfvm.utils.win-get}/bin/win-get packages.json
-    '';
-  }
-"
-
-./result/bin/wfvm-run-get-conda-packages
-
-python -c "
-import json
-
-with open('packages.json') as json_file:
-    packages = json.load(json_file)
-
-with open('packages_noarch.txt', 'w') as list_noarch:
-    with open('packages_win-64.txt', 'w') as list_win64:
-        for fetch in packages['actions']['FETCH']:
-            if 'm-labs' not in fetch['channel']:
-                if fetch['subdir'] == 'noarch':
-                    list = list_noarch
-                elif fetch['subdir'] == 'win-64':
-                    list = list_win64
-                else:
-                    raise ValueError
-                url = fetch['url']
-                if url.endswith('.conda'):
-                  url = url[:-6] + '.tar.bz2'
-                print(url, file=list)
-"
-
-for type in "noarch" "win-64"; do
-  echo Downloading $type packages
-  out=conda_$type\_packages.nix
-  echo "{ pkgs } : [" > $out
-  while read package; do
-    hash=$(nix-prefetch-url $package)
-    echo "
-(pkgs.fetchurl {
-  url = \"$package\";
-  sha256 = \"$hash\";
-})" >> $out
-  done < packages_$type.txt
-  echo "]" >> $out
-done
-
-rm result getcondapackages.bat packages.json packages_noarch.txt packages_win-64.txt

artiq-fast/windows/manual-test-run.nix

@@ -1,10 +0,0 @@
-{ pkgs ? import <nixpkgs> {} }:
-
-let
-  artiqpkgs = import ../. { inherit pkgs; };
-  run-test = import ./run-test.nix {
-    inherit pkgs artiqpkgs;
-    testCommand = "set ARTIQ_ROOT=%cd%\\Anaconda3\\envs\\artiq-env\\Lib\\site-packages\\artiq\\examples\\kc705_nist_clock&& python -m unittest discover -v sipyco.test && python -m unittest discover -v artiq.test";
-  };
-in
-  run-test

artiq-fast/windows/run-test.nix

@@ -1,60 +0,0 @@
-{ pkgs, artiqpkgs, testCommand, testTimeout ? 600 }:
-
-let
-  condaEnv = "artiq-env";
-  tcpPorts = [ 1380 1381 1382 1383 ];
-  forwardedPorts =
-    map (port: {
-      listenAddr = "192.168.1.50";
-      targetAddr = "192.168.1.50";
-      inherit port;
-    }) tcpPorts;
-
-  wfvm = import ../wfvm.nix { inherit pkgs; };
-  conda-deps = {
-    name = "conda-deps";
-    script = let
-      artiq6 = pkgs.lib.strings.versionAtLeast artiqpkgs.artiq.version "6.0";
-      qt-asyncio-package = if artiq6 then artiqpkgs.conda-qasync else artiqpkgs.conda-quamash;
-      conda-deps-noarch = import (if artiq6 then ./conda_noarch_packages.nix else ./conda_noarch_packages-legacy.nix) { inherit pkgs; };
-      conda-deps-win-64 = import (if artiq6 then ./conda_win-64_packages.nix else ./conda_win-64_packages-legacy.nix) { inherit pkgs; };
-      conda-packages-put = pkgs.lib.strings.concatStringsSep "\n"
-          ( (map (package: ''win-put ${package} 'fake-channel/noarch' '') conda-deps-noarch)
-             ++ (map (package: ''win-put ${package} 'fake-channel/win-64' '') conda-deps-win-64) );
-    in
-      ''
-      win-exec 'mkdir fake-channel && mkdir fake-channel\noarch && mkdir fake-channel\win-64'
-
-      ${conda-packages-put}
-
-      win-put ${artiqpkgs.conda-windows-binutils-or1k}/win-64/*.tar.bz2 'fake-channel/win-64'
-      win-put ${artiqpkgs.conda-windows-llvm-or1k}/win-64/*.tar.bz2 'fake-channel/win-64'
-      win-put ${artiqpkgs.conda-windows-llvmlite-artiq}/win-64/*.tar.bz2 'fake-channel/win-64'
-
-      win-put ${artiqpkgs.conda-pythonparser}/noarch/*.tar.bz2 'fake-channel/noarch'
-      win-put ${artiqpkgs.conda-sipyco}/noarch/*.tar.bz2 'fake-channel/noarch'
-      win-put ${qt-asyncio-package}/noarch/*.tar.bz2 'fake-channel/noarch'
-      '';
-  };
-in
-  wfvm.utils.wfvm-run {
-    name = "windows-tests";
-    image = wfvm.makeWindowsImage { installCommands = [ wfvm.layers.anaconda3 conda-deps ]; };
-    inherit forwardedPorts;
-    script =
-      ''
-      ${wfvm.utils.win-put}/bin/win-put ${artiqpkgs.conda-artiq}/noarch/*.tar.bz2 'fake-channel/noarch'
-
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda index fake-channel"
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate && conda create -n ${condaEnv} --offline"
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate ${condaEnv} && conda install -y -c file:///C:/users/wfvm/fake-channel --offline artiq"\
-
-      # Schedule a timed shutdown against hanging test runs
-      ${wfvm.utils.win-exec}/bin/win-exec "shutdown -s -t ${toString testTimeout}"
-
-      ${wfvm.utils.win-exec}/bin/win-exec ".\Anaconda3\scripts\activate ${condaEnv} && ${testCommand}"
-
-      # Abort timeouted shutdown
-      ${wfvm.utils.win-exec}/bin/win-exec "shutdown -a"
-      '';
-  }

artiq-full.nix

@@ -1,247 +0,0 @@
-{ pkgs ? import <nixpkgs> {}
-, beta ? <beta>
-}:
-
-let
-  sinaraSystemsRev = builtins.readFile <artiq-board-generated/sinara-rev.txt>;
-  sinaraSystemsHash = builtins.readFile <artiq-board-generated/sinara-hash.txt>;
-  sinaraSystemsSrc =
-    if beta
-    then pkgs.fetchgit {
-      url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
-      rev = sinaraSystemsRev;
-      sha256 = sinaraSystemsHash;
-    }
-    else <sinaraSystemsSrc>;
-  artiq-fast =
-    if beta
-    then <artiq-board-generated/fast>
-    else <artiq-fast>;
-  artiqVersion = import (artiq-fast + "/pkgs/artiq-version.nix") {
-    inherit (pkgs) stdenv git fetchgit;
-  };
-  targets = import ./artiq-full/artiq-targets.nix {
-    inherit pkgs artiqVersion sinaraSystemsSrc;
-  };
-  kasliVariants = map ({ variant, ... }: variant) (
-    builtins.filter ({ target, ... }: target == "kasli") (
-      builtins.attrValues targets
-    )
-  );
-  standaloneVariants = map ({ variant, ... }: variant) (
-    builtins.filter ({ target, standalone ? false, ... }: target == "kasli" && standalone) (
-      builtins.attrValues targets
-    )
-  );
-  serializedTargets = pkgs.lib.generators.toPretty {} (
-    map (conf:
-      if conf ? buildCommand
-      then conf // {
-        buildCommand = builtins.replaceStrings ["$"] ["\\\\\\$"]  conf.buildCommand;
-      }
-      else conf
-    ) (builtins.attrValues targets)
-  );
-
-  generatedNix = pkgs.runCommand "generated-nix" { buildInputs = [ pkgs.nix pkgs.git ]; }
-    ''
-    mkdir $out
-
-    ${if beta
-      then ''
-        cp -a ${<artiq-board-generated>} $out/board-generated
-        ln -s board-generated/fast $out/fast
-      ''
-      else "cp -a ${<artiq-fast>} $out/fast"}
-    cp ${./artiq-full}/artiq-board-vivado.nix $out
-    cp ${./artiq-full}/generate-identifier.py $out
-    cp ${./artiq-full}/conda-artiq-board.nix $out
-    cp ${./artiq-full}/extras.nix $out
-    cp ${./artiq-full}/*.patch $out
-
-    ${if beta
-      then ''
-        REV=${sinaraSystemsRev}
-        HASH=${sinaraSystemsHash}
-      ''
-      else ''
-        REV=`git --git-dir ${sinaraSystemsSrc}/.git rev-parse HEAD`
-        SINARA_SRC_CLEAN=`mktemp -d`
-        cp -a ${sinaraSystemsSrc}/. $SINARA_SRC_CLEAN
-        chmod -R 755 $SINARA_SRC_CLEAN/.git
-        chmod 755 $SINARA_SRC_CLEAN
-        rm -rf $SINARA_SRC_CLEAN/.git
-        HASH=`nix-hash --type sha256 --base32 $SINARA_SRC_CLEAN`
-      ''}
-    cat > $out/default.nix << EOF
-    { pkgs ? import <nixpkgs> {}}:
-
-    let
-      artiq-fast = import ${if beta then "./board-generated" else "."}/fast { inherit pkgs; };
-      ddbDeps = [
-        artiq-fast.artiq
-        (pkgs.python3.withPackages (ps: [ ps.jsonschema ]))
-      ];
-
-      kasliVariants = [${builtins.concatStringsSep " " (
-        builtins.map (variant: "\"${variant}\"") kasliVariants
-      )}];
-      standaloneVariants = [${builtins.concatStringsSep " " (
-        builtins.map (variant: "\"${variant}\"") standaloneVariants
-      )}];
-
-      vivado = import ${if beta then "./board-generated" else "."}/fast/vivado.nix {
-        inherit pkgs;
-      };
-      artiq-board =
-        ${if beta
-        then ''
-          import ./artiq-board-vivado.nix {
-            inherit pkgs vivado;
-            version = artiq-fast.artiq.version;
-            board-generated = import ./board-generated {
-              inherit pkgs;
-            };
-          }
-        ''
-        else ''
-          import ./fast/artiq-board.nix {
-            inherit pkgs vivado;
-          }
-        ''};
-      conda-artiq-board = import ./conda-artiq-board.nix { inherit pkgs; };
-      src = pkgs.fetchgit {
-        url = "https://git.m-labs.hk/M-Labs/sinara-systems.git";
-        rev = "$REV";
-        sha256 = "$HASH";
-      };
-      artiq-targets = pkgs.lib.lists.foldr (conf: start:
-        let
-          inherit (conf) target variant;
-          json = src + "/\''${variant}.json";
-          boardBinaries = artiq-board (conf // {
-            src = json;
-          });
-        in
-          start // {
-            "artiq-board-\''${target}-\''${variant}" = boardBinaries;
-            "conda-artiq-board-\''${target}-\''${variant}" = conda-artiq-board {
-              boardBinaries = boardBinaries;
-              inherit target variant;
-            };
-          } // (pkgs.lib.optionalAttrs (
-            target == "kasli" &&
-             builtins.elem variant standaloneVariants
-          ) {
-            "device-db-\''${target}-\''${variant}" = pkgs.stdenv.mkDerivation {
-              name = "device-db-\''${target}-\''${variant}";
-              buildInputs = ddbDeps;
-              phases = [ "buildPhase" ];
-              buildPhase = "
-                mkdir \$out
-                artiq_ddb_template \''${json} -o \$out/device_db.py
-                mkdir \$out/nix-support
-                echo file device_db_template \$out/device_db.py >> \$out/nix-support/hydra-build-products
-                ";
-            };
-          })
-      ) {} ${serializedTargets};
-      drtio-systems = {
-        ${pkgs.lib.optionalString beta ''
-          berkeley3 = {
-            master = "berkeley3master";
-            satellites = {
-              "1" = "berkeley3satellite";
-            };
-          };
-          bonn1 = {
-            master = "bonn1master";
-            satellites = {
-              "1" = "bonn1satellite";
-            };
-          };
-          hw2 = {
-            master = "hw2master";
-            satellites = {
-              "1" = "hw2satellite";
-            };
-          };
-          ptb3 = {
-            master = "ptb3master";
-            satellites = {
-              "1" = "ptb3satellite";
-            };
-          };
-          purdue = {
-            master = "purduemaster";
-            satellites = {
-              "1" = "purduesatellite";
-            };
-          };
-          stfc = {
-            master = "stfcmaster";
-            satellites = {
-              "1" = "stfcsatellite";
-            };
-          };
-          wipm7 = {
-            master = "wipm7master";
-            satellites = {
-              "1" = "wipm7satellite";
-            };
-          };
-        ''}
-      };
-      drtio-ddbs = pkgs.lib.attrsets.mapAttrs'
-        (system: crates: pkgs.lib.attrsets.nameValuePair ("device-db-" + system)
-        (pkgs.stdenv.mkDerivation {
-          name = "device-db-\''${system}";
-          buildInputs = ddbDeps;
-          phases = [ "buildPhase" ];
-          buildPhase = "
-            mkdir \$out
-            artiq_ddb_template \
-              \''${pkgs.lib.strings.concatStringsSep " " (pkgs.lib.attrsets.mapAttrsToList (dest: desc: "-s " + dest + " " + (src + "/\''${desc}.json")) crates.satellites) } \
-              \''${src}/\''${crates.master}.json -o \$out/device_db.py
-            mkdir \$out/nix-support
-            echo file device_db_template \$out/device_db.py >> \$out/nix-support/hydra-build-products
-            ";
-        })) drtio-systems;
-      extras = import ./extras.nix { inherit pkgs; inherit (artiq-fast) sipyco asyncserial artiq; };
-    in
-      artiq-fast // artiq-targets // drtio-ddbs // extras // rec {
-        conda-artiq-board-kasli-tester = conda-artiq-board {
-          target = "kasli";
-          variant = "tester";
-          boardBinaries = artiq-fast.artiq-board-kasli-tester;
-        };
-        conda-artiq-board-kc705-nist_clock = conda-artiq-board {
-          target = "kc705";
-          variant = "nist_clock";
-          boardBinaries = artiq-fast.artiq-board-kc705-nist_clock;
-        };
-      }
-    EOF
-    '';
-  pythonDeps = import ./artiq-full/python-deps.nix { inherit pkgs; };
-  sipycoManualPackages = import ./artiq-full/sipyco-manual.nix {
-    inherit (pkgs) stdenv lib python3Packages texlive texinfo;
-    inherit (import artiq-fast { inherit pkgs; }) sipyco;
-  };
-  artiqManualPackages = import ./artiq-full/artiq-manual.nix {
-    inherit (pkgs) stdenv lib fetchgit git python3Packages texlive texinfo;
-    inherit (pythonDeps) sphinxcontrib-wavedrom;
-    inherit artiq-fast;
-  };
-  artiq-full = import generatedNix { inherit pkgs; };
-  exampleUserEnv = import ./artiq-full/example-user-env.nix { inherit pkgs artiq-full; };
-  jobs = artiq-full // sipycoManualPackages // artiqManualPackages // exampleUserEnv;
-in
-  builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) jobs // {
-    artiq-full = pkgs.releaseTools.channel {
-      name = "artiq-full";
-      src = generatedNix;
-      constituents = [];
-    };
-    conda-channel = import ./artiq-full/conda-channel.nix { inherit pkgs; } { inherit jobs; };
-  }

artiq-full/artiq-board-vivado.nix

@@ -1,125 +0,0 @@
-# Install Vivado in /opt and add to /etc/nixos/configuration.nix:
-#  nix.sandboxPaths = ["/opt"];
-
-{ pkgs
-, vivado ? import ./fast/vivado.nix { inherit pkgs; }
-, board-generated
-, version
-}:
-
-let
-  # Funnelling the source code through a Nix string allows dropping
-  # all dependencies via `unsafeDiscardStringContext`.
-  discardContextFromPath = { name, src }:
-    let
-      packed = pkgs.stdenv.mkDerivation {
-          name = "${name}.nar.base64";
-          buildInputs = [ pkgs.nix ];
-          phases = [ "installPhase" ];
-          installPhase = "nix-store --dump ${src} | base64 -w0 > $out";
-        };
-      unpacked = archive:
-        pkgs.stdenvNoCC.mkDerivation {
-          name = builtins.unsafeDiscardStringContext name;
-
-          phases = [ "installPhase" ];
-          buildInputs = [ pkgs.nix ];
-          installPhase = "base64 -d < ${archive} | nix-store --restore $out";
-        };
-    in
-      unpacked (
-        builtins.toFile "${builtins.unsafeDiscardStringContext name}.nar.base64" (
-          builtins.unsafeDiscardStringContext (
-            builtins.readFile packed
-          ))) ;
-in
-{ target
-, variant
-, extraInstallCommands ? ""
-, ... }:
-let
-  name = "artiq-board-${target}-${variant}-${version}";
-  installPath = builtins.unsafeDiscardStringContext "${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}";
-
-  generated = board-generated."artiq-board-${target}-${variant}";
-
-  identifierStr = "${version};${variant}";
-  identifiers = import (
-    pkgs.runCommandLocal "${name}-identifiers.nix" {
-      buildInputs = [ pkgs.python3 ];
-    } ''python ${./generate-identifier.py} "${identifierStr}" > $out''
-  );
-
-  # Depends on just Vivado and the generated Bitstream source
-  vivadoCheckpoint = pkgs.stdenvNoCC.mkDerivation {
-    name = builtins.unsafeDiscardStringContext "${name}-vivado-checkpoint";
-
-    src = discardContextFromPath {
-      name = "${name}-gateware";
-      src = "${generated}/gateware";
-    };
-    buildInputs = [ vivado pkgs.nix ];
-    buildPhase = ''
-      vivado -mode batch -source top_route.tcl
-    '';
-
-    installPhase = ''
-      mkdir -p $out
-
-      chmod a+r top_route.dcp
-      cp top_route.dcp $out
-      cp top_bitstream.tcl $out
-    '';
-  };
-
-  vivadoOutput = pkgs.stdenvNoCC.mkDerivation {
-    name = builtins.unsafeDiscardStringContext "${name}-vivado-output";
-    src = vivadoCheckpoint;
-    buildInputs = [ vivado ];
-    buildPhase =
-      ''
-      cat >top.tcl <<EOF
-      open_checkpoint top_route.dcp
-      '' +
-      (pkgs.lib.concatMapStrings ({ cell, init }:
-        ''
-        set_property INIT ${init} [get_cell ${cell}]
-        ''
-      ) identifiers) +
-      ''
-      source "top_bitstream.tcl"
-      EOF
-      vivado -mode batch -source top.tcl
-      '';
-    installPhase = ''
-      TARGET_DIR=$out/${installPath}
-      mkdir -p $TARGET_DIR
-      chmod a+r top.bit
-      cp top.bit $TARGET_DIR/
-    '';
-
-    # temporarily disabled because there is currently always at least one Kasli bitstream
-    # that fails timing and blocks the conda channel.
-    doCheck = false;
-    checkPhase = ''
-      # Search for PCREs in the Vivado output to check for errors
-      check_log() {
-        set +e
-        grep -Pe "$1" vivado.log
-        FOUND=$?
-        set -e
-        if [ $FOUND != 1 ]; then
-          exit 1
-        fi
-      }
-      check_log "\d+ constraint not met\."
-      check_log "Timing constraints are not met\."
-    '';
-  };
-in
-pkgs.python3Packages.toPythonModule (
-  pkgs.buildEnv rec {
-    inherit name;
-    paths = [ generated vivadoOutput ];
-    pathsToLink = [ "/${installPath}" ];
-  })

artiq-full/artiq-manual.nix

@@ -1,57 +0,0 @@
-{ stdenv, lib, fetchgit, git, python3Packages, texlive, texinfo, sphinxcontrib-wavedrom, artiq-fast }:
-
-let
-  artiqVersion = import (artiq-fast + "/pkgs/artiq-version.nix") { inherit stdenv fetchgit git; };
-
-  isLatexPdfTarget = target: builtins.match "latexpdf.*" target != null;
-
-  latex = texlive.combine {
-    inherit (texlive)
-      scheme-basic latexmk cmap collection-fontsrecommended fncychap
-      titlesec tabulary varwidth framed fancyvrb float wrapfig parskip
-      upquote capt-of needspace etoolbox;
-  };
-
-  artiq-manual = target: stdenv.mkDerivation rec {
-    name = "artiq-manual-${target}-${version}";
-    version = artiqVersion;
-
-    src = import (artiq-fast + "/pkgs/artiq-src.nix") { inherit fetchgit; };
-    buildInputs = [
-      python3Packages.sphinx python3Packages.sphinx_rtd_theme
-      python3Packages.sphinx-argparse sphinxcontrib-wavedrom
-    ] ++
-      lib.optional (isLatexPdfTarget target) latex ++
-      lib.optional (target == "texinfo") texinfo;
-
-    preBuild = ''
-        export VERSIONEER_OVERRIDE=${artiqVersion}
-        export SOURCE_DATE_EPOCH=${import (artiq-fast + "/pkgs/artiq-timestamp.nix") { inherit stdenv fetchgit git; }}
-        cd doc/manual
-      '';
-    makeFlags = [ target ];
-
-    installPhase =
-      let
-        dest = "$out/share/doc/artiq-manual";
-      in
-        if isLatexPdfTarget target
-        then ''
-            mkdir -p ${dest}
-            cp _build/latex/ARTIQ.pdf ${dest}/
-
-            mkdir -p $out/nix-support/
-            echo doc-pdf manual ${dest} ARTIQ.pdf >> $out/nix-support/hydra-build-products
-          ''
-        else ''
-            mkdir -p ${dest}
-            cp -r _build/${target} ${dest}/
-
-            mkdir -p $out/nix-support/
-            echo doc manual ${dest}/${target} index.html >> $out/nix-support/hydra-build-products
-          '';
-  };
-
-  targets = [ "html" "latexpdf" ];
-in
-  builtins.listToAttrs (map (target: { name = "artiq-manual-${target}"; value = artiq-manual target; }) targets)

artiq-full/artiq-targets.nix

@@ -1,65 +0,0 @@
-{ pkgs
-, artiqVersion
-, sinaraSystemsSrc
-}:
-
-let
-  jsons =
-    map (jsonFile: builtins.fromJSON (
-      builtins.readFile (sinaraSystemsSrc + "/${jsonFile}")
-    )) (
-      builtins.attrNames (
-        pkgs.lib.filterAttrs (name: type:
-          type != "directory" &&
-          builtins.match ".+\\.json" name != null
-        ) (builtins.readDir sinaraSystemsSrc)
-      )
-    );
-  kasli = builtins.listToAttrs (
-    builtins.map ({ variant, base, ... }: {
-      name = "artiq-board-kasli-${variant}";
-      value = {
-        target = "kasli";
-        inherit variant;
-        src = sinaraSystemsSrc + "/${variant}.json";
-        buildCommand = "python -m artiq.gateware.targets.kasli_generic $src";
-        standalone = base == "standalone";
-      };
-    }) (
-      builtins.filter (json:
-        pkgs.lib.strings.versionAtLeast artiqVersion (
-          if json ? min_artiq_version
-          then json.min_artiq_version
-          else "0"
-        )
-      ) jsons
-    )
-  );
-in
-kasli // {
-  artiq-board-sayma-rtm = {
-    target = "sayma";
-    variant = "rtm";
-    buildCommand = "python -m artiq.gateware.targets.sayma_rtm";
-  };
-  artiq-board-sayma-satellite = {
-    target = "sayma";
-    variant = "satellite";
-    buildCommand = "python -m artiq.gateware.targets.sayma_amc";
-  };
-  artiq-board-metlino-master = {
-    target = "metlino";
-    variant = "master";
-    buildCommand = "python -m artiq.gateware.targets.metlino";
-  };
-  artiq-board-kc705-nist_qc2 = {
-    target = "kc705";
-    variant = "nist_qc2";
-  };
-} // (pkgs.lib.optionalAttrs (pkgs.lib.strings.versionAtLeast artiqVersion "6.0") {
-  artiq-board-sayma-satellite-st = {
-    target = "sayma";
-    variant = "satellite";
-    buildCommand = "python -m artiq.gateware.targets.sayma_amc --jdcg-type syncdds";
-  };
-})

artiq-full/conda-artiq-board.nix

@@ -1,48 +0,0 @@
-{ pkgs }:
-{ target, variant, boardBinaries }:
-
-with pkgs;
-
-let
-  version = import ./fast/pkgs/artiq-version.nix (with pkgs; { inherit stdenv fetchgit git; });
-  fakeCondaSource = runCommand "fake-condasrc-artiq-board-${target}-${variant}" { }
-    ''
-    mkdir -p $out/fake-conda;
-
-    cat << EOF > $out/fake-conda/meta.yaml
-    package:
-      name: artiq-board-${target}-${variant}
-      version: ${version}
-
-    build:
-      noarch: python
-      ignore_prefix_files: True
-
-    outputs:
-      - name: artiq-board-${target}-${variant}
-        noarch: python
-        files:
-          - site-packages
-        ignore_prefix_files: True
-
-    about:
-      home: https://m-labs.hk/artiq
-      license: LGPL
-      summary: 'Bitstream, bootloader and firmware for the ${target}-${variant} board variant'
-    EOF
-
-    cat << EOF > $out/fake-conda/build.sh
-    #!/bin/bash
-    set -e
-    SOC_PREFIX=\$PREFIX/site-packages/artiq/board-support/${target}-${variant}
-    mkdir -p \$SOC_PREFIX
-    cp ${boardBinaries}/${pkgs.python3Packages.python.sitePackages}/artiq/board-support/${target}-${variant}/* \$SOC_PREFIX
-    EOF
-    chmod 755 $out/fake-conda/build.sh
-    '';
-  conda-artiq-board = import ./fast/conda/build.nix { inherit pkgs; } {
-    name = "conda-artiq-board-${target}-${variant}";
-    src = fakeCondaSource;
-  };
-in
-  conda-artiq-board

artiq-full/conda-channel.nix

@@ -1,25 +0,0 @@
-{ pkgs }:
-{ jobs }:
-
-let 
-  condaBuilderEnv = import <artiq-fast/conda/builder-env.nix> { inherit pkgs; };
-in
-  pkgs.runCommand "conda-channel" { }
-    ''
-    mkdir -p $out/noarch $out/linux-64 $out/win-64
-    for storepath in ${pkgs.lib.concatMapStringsSep " " builtins.toString (builtins.attrValues jobs)}; do
-      hydra_build_products=$storepath/nix-support/hydra-build-products
-      if [ -f $hydra_build_products ]; then
-        while IFS= read -r line; do
-          type=`echo $line | cut -f2 -d " "`
-          if [ $type == "conda" ]; then
-            path=`echo $line | cut -f3 -d " "`
-            arch=`echo $path | cut -f5 -d "/"`
-            ln -s $path $out/$arch
-          fi
-        done < $hydra_build_products
-      fi
-    done
-    cd $out
-    ${condaBuilderEnv}/bin/conda-builder-env -c "conda index"
-    ''

artiq-full/example-user-env.nix

@@ -1,37 +0,0 @@
-{ pkgs, artiq-full }:
-let
-  matplotlib-qt = (pkgs.python3Packages.matplotlib.override { enableQt = true; });
-in
-{
-  artiq-example-user-env = pkgs.runCommand "artiq-example-user-env" {
-    buildInputs = [
-      (pkgs.python3.withPackages(ps: [
-        artiq-full.artiq
-        artiq-full.artiq-comtools
-        artiq-full.wand
-        artiq-full.flake8-artiq
-        artiq-full.lda
-        artiq-full.korad_ka3005p
-        artiq-full.novatech409b
-        artiq-full.thorlabs_tcube
-        artiq-full.artiq-board-kc705-nist_clock
-        artiq-full.artiq-board-kasli-oregon
-        ps.paramiko
-        ps.pandas
-        ps.numpy
-        ps.scipy
-        ps.numba
-        ps.bokeh
-        matplotlib-qt
-        (ps.cirq.override { matplotlib = matplotlib-qt; })
-        # qiskit does not work with matplotlib-qt
-        #ps.qiskit
-      ]))
-
-      artiq-full.openocd
-      pkgs.gtkwave
-      #pkgs.spyder  # broken on 20.03
-      pkgs.R
-    ];
-  } "touch $out";
-}

artiq-full/extras.nix

@@ -1,248 +0,0 @@
-{ pkgs, sipyco, asyncserial, artiq }:
-let
-  condaBuild = import ./fast/conda/build.nix { inherit pkgs; };
-  condaFakeSource = import ./fast/conda/fake-source.nix { inherit pkgs; };
-  dualPackage = (
-    { name, version, src, pythonOptions ? {}, condaOptions ? {}, withManual ? true}:
-      {
-        "${name}" = pkgs.python3Packages.buildPythonPackage ({
-          inherit version;
-          name = "${name}-${version}";
-          inherit src;
-        } // pythonOptions);
-        "conda-${name}" = condaBuild {
-          name = "conda-${name}";
-          src = condaFakeSource ({
-            inherit name version src;
-          } // condaOptions);
-        };
-      } // (pkgs.lib.optionalAttrs withManual {
-        "${name}-manual-html" = pkgs.stdenv.mkDerivation {
-          name = "${name}-manual-html-${version}";
-          inherit version src;
-          buildInputs = (with pkgs.python3Packages; [ sphinx sphinx_rtd_theme sphinx-argparse ]) ++ [ artiq ];
-          preBuild = ''
-            export SOURCE_DATE_EPOCH=${import ./fast/pkgs/artiq-timestamp.nix { inherit (pkgs) stdenv fetchgit git; }}
-            cd doc
-          '';
-          makeFlags = [ "html" ];
-          installPhase =
-            let
-              dest = "$out/share/doc/${name}-manual";
-            in
-              ''
-              mkdir -p ${dest}
-              cp -r _build/html ${dest}/
-
-              mkdir -p $out/nix-support/
-              echo doc manual ${dest}/html index.html >> $out/nix-support/hydra-build-products
-              '';
-        };
-      })
-    );
-  # https://github.com/m-labs/artiq/issues/23
-  hidapi = pkgs.hidapi.overrideAttrs (oa: {
-      src = pkgs.fetchFromGitHub {
-        owner = "signal11";
-        repo = "hidapi";
-        rev = "a6a622ffb680c55da0de787ff93b80280498330f";
-        sha256 = "17n7c4v3jjrnzqwxpflggxjn6vkzscb32k4kmxqjbfvjqnx7qp7j";
-      };
-    });
-in
-  (dualPackage {
-    name = "korad_ka3005p";
-    version = "1.1";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "korad_ka3005p";
-      rev = "a1898409cb188b388ed1cf84e76ca69e9c8a74eb";
-      sha256 = "0h20qss70nssqiagc2fx75mravq1pji7rizhag3nq8xrcz2w20nc";
-    };
-    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
-    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
-  }) // (dualPackage {
-    name = "novatech409b";
-    version = "1.1";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "novatech409b";
-      rev = "3bd559753972f07d881df66b7c6819afc5436053";
-      sha256 = "1g9qv6fn5h7d393mb1v7w8sg6fimqg34blqdj22qnayb4agw1wyg";
-    };
-    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
-    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
-  }) // (dualPackage {
-    name = "lda";
-    version = "1.1";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "lda";
-      rev = "e6bf828b6dfd7fbf59b61b691712736c98c95970";
-      sha256 = "1w4ykzsl3386bz4ggpd6i60b6a3k7rnc6qjw59xm3hk0vs3w2vyn";
-    };
-    pythonOptions = {
-      propagatedBuildInputs = [ sipyco ];
-      postPatch = ''
-        substituteInPlace lda/hidapi.py \
-        --replace "hidapi_lib_path = None"\
-                  "hidapi_lib_path = '${hidapi}/lib/libhidapi-libusb.so.0'"
-      '';
-    };
-    condaOptions = { dependencies = [ "sipyco" ]; };
-  }) // (dualPackage {
-    name = "thorlabs_tcube";
-    version = "1.1";
-    src = pkgs.fetchFromGitHub {
-      owner = "m-labs";
-      repo = "thorlabs_tcube";
-      rev = "0cb0c15fc7e660a150e193245f5338d48f8b97db";
-      sha256 = "1n4zmjcj2kpd97217y602pq6x8s80w39fgyi6qjmal92aicqdg07";
-    };
-    pythonOptions = { propagatedBuildInputs = [ sipyco asyncserial ]; };
-    condaOptions = { dependencies = [ "sipyco" "asyncserial" ]; };
-  }) // (dualPackage {
-    name = "newfocus8742";
-    version = "0.2";
-    src = pkgs.fetchFromGitHub {
-      owner = "quartiq";
-      repo = "newfocus8742";
-      rev = "9f6092b724b33b934aa4d3a1d6a20c295cd1d02d";
-      sha256 = "0qf05ghylnqf3l5vjx5dc748wi84xn6p6lb6f9r8p6f1z7z67fb8";
-    };
-    pythonOptions = {
-      propagatedBuildInputs = [ sipyco pkgs.python3Packages.pyusb ];
-      # no unit tests so do a simple smoke test
-      checkPhase = "python -m newfocus8742.aqctl_newfocus8742 -h";
-    };
-    condaOptions = { dependencies = [ "sipyco" ]; };
-  }) // (dualPackage {
-    name = "hut2";
-    version = "0.2";
-    src = pkgs.fetchFromGitHub {
-      owner = "quartiq";
-      repo = "hut2";
-      rev = "68369d5d63d233827840a9a752d90454a4e03baa";
-      sha256 = "0r832c0icz8v3w27ci13024bqfslj1gx6dwhjv11ksw229xdcghd";
-    };
-    pythonOptions = {
-      propagatedBuildInputs = [ sipyco ];
-      # no unit tests without hardware so do a simple smoke test
-      checkPhase = "python -m hut2.aqctl_hut2 -h";
-    };
-    condaOptions = { dependencies = [ "sipyco" ]; };
-  }) // rec {
-    toptica-lasersdk = pkgs.python3Packages.buildPythonPackage rec {
-      version = "2.0.0";
-      name = "toptica-lasersdk-${version}";
-      format = "wheel";
-      src = pkgs.fetchurl {
-        url = "https://files.pythonhosted.org/packages/6b/e2/5c98407215884c2570453a78bc0d6f0bbe619f06593847ccd6a2f1d3fe59/toptica_lasersdk-2.0.0-py3-none-any.whl";
-        sha256 = "1k5d9ah8qzp75hh63nh9l5dk808v9ybpmzlhrdc3sxmas3ajv8s7";
-      };
-      propagatedBuildInputs = [ pkgs.python3Packages.pyserial ];
-    };
-    toptica-lasersdk-artiq = pkgs.python3Packages.buildPythonPackage rec {
-      version = "0.2";
-      name = "toptica-lasersdk-artiq-${version}";
-      src = pkgs.fetchFromGitHub {
-        owner = "quartiq";
-        repo = "lasersdk-artiq";
-        rev = "901dec13a1bf9429ce7ab49be34b03d1c49b8a9f";
-        sha256 = "0lqxvgvpgrpw1kzhg5axnfb40ils2vdk75r43hqmk2lfz4sydwb2";
-      };
-      postPatch = ''
-        substituteInPlace lasersdk_artiq/aqctl_laser.py \
-          --replace "toptica.lasersdk.async.client" \
-                    "toptica.lasersdk.asyncio.client"
-        substituteInPlace lasersdk_artiq/test.py \
-          --replace "toptica.lasersdk.async.client" \
-                    "toptica.lasersdk.asyncio.client"
-      '';
-      propagatedBuildInputs = [ sipyco toptica-lasersdk ];
-    };
-    conda-toptica-lasersdk-artiq = condaBuild {
-      name = "conda-toptica-lasersdk-artiq";
-      src = condaFakeSource {
-        name = "toptica-lasersdk-artiq";
-        inherit (toptica-lasersdk-artiq) version src;
-        dependencies = [ "sipyco" "lasersdk =1.3.1" ];
-      };
-    };
-  } // (dualPackage {
-    name = "highfinesse-net";
-    version = "0.2";
-    src = pkgs.fetchFromGitHub {
-      owner = "quartiq";
-      repo = "highfinesse-net";
-      rev = "a9cc049c9846845d2b2d8662266ec11fe770abee";
-      sha256 = "01mk4gf6rk3jqpz4y7m35vawjybvyp26bizz5a4ygkb8dq5l51g4";
-    };
-    pythonOptions = {
-      propagatedBuildInputs = [ sipyco ];
-      # no unit tests without hardware so do a simple smoke test
-      checkPhase = "python -m highfinesse_net.aqctl_highfinesse_net -h";
-    };
-    condaOptions = { dependencies = [ "sipyco" ]; };
-  }) // rec {
-    artiq-comtools = pkgs.python3Packages.buildPythonPackage rec {
-      name = "artiq-comtools-${version}";
-      version = "1.1";
-      src = pkgs.fetchFromGitHub {
-        owner = "m-labs";
-        repo = "artiq-comtools";
-        rev = "v${version}";
-        sha256 = "165j12k9nnrkf2pv0idcv6xhnp1hnsllna4rps2dssnqgjfaw1ss";
-      };
-      propagatedBuildInputs = [ sipyco pkgs.python3Packages.numpy pkgs.python3Packages.aiohttp ];
-      # Modifies PATH to pass the wrapped python environment (i.e. python3.withPackages(...) to subprocesses.
-      # Allows subprocesses using python to find all packages you have installed
-      makeWrapperArgs = [ ''--run 'if [ ! -z "$NIX_PYTHONPREFIX" ]; then export PATH=$NIX_PYTHONPREFIX/bin:$PATH;fi' '' ];
-    };
-    conda-artiq-comtools = condaBuild {
-      name = "conda-artiq-comtools";
-      src = condaFakeSource {
-        name = "artiq-comtools";
-        inherit (artiq-comtools) version src;
-        dependencies = [ "sipyco" "numpy" "aiohttp >=3" ];
-      };
-    };
-  } // {
-    wand = pkgs.python3Packages.buildPythonApplication rec {
-      name = "wand";
-      version = "0.4.dev";
-      src = pkgs.fetchFromGitHub {
-        owner = "OxfordIonTrapGroup";
-        repo = "wand";
-        rev = "0bf1cfef4aa37e5761c20ac8702abec125b45e23";
-        sha256 = "0jfw6w6id7qkx2f6rklrmp13b2hsnvii1qbls60ampx399lcb43g";
-      };
-      patches = [ ./wand-fix-config-dir.patch ];
-      nativeBuildInputs = [ pkgs.qt5.wrapQtAppsHook ];
-      dontWrapQtApps = true;
-      postFixup = ''
-        wrapQtApp "$out/bin/wand_gui"
-      '';
-      propagatedBuildInputs = with pkgs.python3Packages; [ artiq quamash numpy scipy influxdb setuptools ];
-    };
-  } // (dualPackage {
-    name = "flake8-artiq";
-    version = "0.1";
-    withManual = false;
-    src = pkgs.fetchgit {
-      url = "https://gitlab.com/duke-artiq/flake8-artiq.git";
-      rev = "ed5c4f56c391fe11c6c81020f06a1dc80c2cae9e";
-      sha256 = "112qlx3rx4w7l23f0n16xldc49x4wvf65fx4wdyzq85rxlvl72kh";
-    };
-    pythonOptions = {
-      propagatedBuildInputs = [ pkgs.python3Packages.flake8 ];
-      checkInputs = [ pkgs.python3Packages.pytest pkgs.python3Packages.mypy pkgs.python3Packages.flake8 ];
-      checkPhase =
-        ''
-        pytest
-        mypy
-        flake8
-        '';
-    };
-    condaOptions = { dependencies = [ "flake8" ]; };
-  })

artiq-full/generate-identifier.py

@@ -1,24 +0,0 @@
-#!/usr/bin/env python
-#
-# Encodes data like ARTIQ build_soc.py ReprogrammableIdentifier
-
-import sys
-
-if len(sys.argv) != 2:
-    raise ValueError('argument missing')
-
-identifier_str = sys.argv[1]
-contents = list(identifier_str.encode())
-l = len(contents)
-if l > 255:
-    raise ValueError("Identifier string must be 255 characters or less")
-contents.insert(0, l)
-
-f = sys.stdout
-f.write("[\n");
-for i in range(7):
-    init = sum(1 << j if c & (1 << i) else 0 for j, c in enumerate(contents))
-    f.write(
-        '  {{ cell = "identifier_str{}"; init = "256\'h{:X}"; }}\n'.format(i, init)
-    )
-f.write("]\n");

artiq-full/python-deps.nix

@@ -1,43 +0,0 @@
-{ pkgs }:
-
-rec {
-  wavedrom = pkgs.python3Packages.buildPythonPackage rec {
-    pname = "wavedrom";
-    version = "2.0.3.post2";
-
-    src = pkgs.python3Packages.fetchPypi {
-      inherit pname version;
-      sha256 = "13a4086417nv836s2wbj3f4r31gwapbyw5smgl00jsqizwsk96r3";
-    };
-
-    buildInputs = [ pkgs.python3Packages.setuptools_scm ];
-    propagatedBuildInputs = with pkgs.python3Packages; [ svgwrite attrdict ];
-    doCheck = false;
-
-    meta = with pkgs.stdenv.lib; {
-      description = "WaveDrom compatible Python module and command line";
-      homepage    = "https://pypi.org/project/wavedrom/";
-      license     = licenses.mit;
-    };
-  };
-
-  sphinxcontrib-wavedrom = pkgs.python3Packages.buildPythonPackage rec {
-    pname = "sphinxcontrib-wavedrom";
-    version = "2.1.1";
-
-    src = pkgs.python3Packages.fetchPypi {
-      inherit pname version;
-      sha256 = "09xq4csdcil2x8mm38yd5k6lfbkazicvm278xnzwbfc9vghkqqs2";
-    };
-
-    buildInputs = [ pkgs.python3Packages.setuptools_scm ];
-    propagatedBuildInputs = [ wavedrom ] ++ (with pkgs.python3Packages; [ sphinx xcffib cairosvg ]);
-    doCheck = false;
-
-    meta = with pkgs.stdenv.lib; {
-      description = "A Sphinx extension that allows including WaveDrom diagrams";
-      homepage    = "https://pypi.org/project/sphinxcontrib-wavedrom/";
-      license     = licenses.mit;
-    };
-  };
-}

artiq-full/sipyco-manual.nix

@@ -1,56 +0,0 @@
-{ stdenv, lib, python3Packages, texlive, texinfo, sipyco }:
-
-let
-  version = sipyco.version;
-
-  isLatexPdfTarget = target: builtins.match "latexpdf.*" target != null;
-
-  latex = texlive.combine {
-    inherit (texlive)
-      scheme-basic latexmk cmap collection-fontsrecommended fncychap
-      titlesec tabulary varwidth framed fancyvrb float wrapfig parskip
-      upquote capt-of needspace etoolbox;
-  };
-
-  sipyco-manual = target: stdenv.mkDerivation rec {
-    name = "sipyco-manual-${target}-${version}";
-    inherit version;
-
-    src = sipyco.src;
-    buildInputs = [
-      python3Packages.sphinx python3Packages.sphinx_rtd_theme
-      python3Packages.sphinx-argparse sipyco
-    ] ++
-      lib.optional (isLatexPdfTarget target) latex ++
-      lib.optional (target == "texinfo") texinfo;
-
-    preBuild = ''
-        export SOURCE_DATE_EPOCH=`cat TIMESTAMP`
-        cd doc
-      '';
-    makeFlags = [ target ];
-
-    installPhase =
-      let
-        dest = "$out/share/doc/sipyco-manual";
-      in
-        if isLatexPdfTarget target
-        then ''
-            mkdir -p ${dest}
-            cp _build/latex/SiPyCo.pdf ${dest}/
-
-            mkdir -p $out/nix-support/
-            echo doc-pdf manual ${dest} SiPyCo.pdf >> $out/nix-support/hydra-build-products
-          ''
-        else ''
-            mkdir -p ${dest}
-            cp -r _build/${target} ${dest}/
-
-            mkdir -p $out/nix-support/
-            echo doc manual ${dest}/${target} index.html >> $out/nix-support/hydra-build-products
-          '';
-  };
-
-  targets = [ "html" "latexpdf" ];
-in
-  builtins.listToAttrs (map (target: { name = "sipyco-manual-${target}"; value = sipyco-manual target; }) targets)

artiq-full/wand-fix-config-dir.patch

@@ -1,30 +0,0 @@
-diff --git a/wand/tools.py b/wand/tools.py
-index a51dabd..4d5a9d1 100644
---- a/wand/tools.py
-+++ b/wand/tools.py
-@@ -6,6 +6,7 @@ import shutil
- import logging
- 
- from sipyco import pyon
-+from artiq.appdirs import user_config_dir
- import wand
- 
- logger = logging.getLogger(__name__)
-@@ -26,10 +27,15 @@ class LockException(Exception):
-     pass
- 
- 
-+def get_user_config_dir():
-+    dir = user_config_dir("wand", "oitg", "1")
-+    os.makedirs(dir, exist_ok=True)
-+    return dir
-+
-+
- def get_config_path(args, name_suffix=""):
-     config_file = "{}{}_config.pyon".format(args.name, name_suffix)
--    wand_dir = os.path.dirname(wand.__file__)
--    config_path = os.path.join(wand_dir, config_file)
-+    config_path = os.path.join(get_user_config_dir(), config_file)
- 
-     if args.backup_dir == "":
-         backup_path = ""

gluelogic/default.nix

@@ -1,12 +1,12 @@
 { pkgs ? import <nixpkgs> {} }:
 let
-  artiqpkgs = import ../artiq-fast/pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = true; };
   ise = import ./ise.nix { inherit pkgs; };
-  vivado = import ../artiq-fast/vivado.nix { inherit pkgs; };
+  vivado = import ./vivado.nix { inherit pkgs; };
+  fpgatools = import ./fpgatools.nix { inherit pkgs; };
   buildUrukulCpld = {version, src}: pkgs.stdenv.mkDerivation {
     pname = "urukul-cpld";
     inherit src version;
-    buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen]))] ++ (builtins.attrValues ise);
+    buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen]))] ++ (builtins.attrValues fpgatools.ise);
     phases = ["buildPhase" "installPhase"];
     buildPhase = "python $src/urukul_impl.py";
     installPhase =
@@ -16,11 +16,11 @@ let
       echo file binary-dist $out/urukul.jed >> $out/nix-support/hydra-build-products
       '';
   };
-  buildMirnyCpld = {version, src}: pkgs.stdenv.mkDerivation {
+  buildMirnyCpld = {version, patchPhase ? "", src}: pkgs.stdenv.mkDerivation {
     pname = "mirny-cpld";
-    inherit src version;
-    buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen]))] ++ (builtins.attrValues ise);
-    phases = ["buildPhase" "installPhase"];
+    inherit src version patchPhase;
+    buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen]))] ++ (builtins.attrValues fpgatools.ise);
+    phases = ["unpackPhase" "patchPhase" "buildPhase" "installPhase"];
     buildPhase = "python $src/mirny_impl.py";
     installPhase =
       ''
@@ -58,18 +58,28 @@ in
       src = <mirnySrc>;
     };
     mirny-cpld-release = buildMirnyCpld rec {
+      version = "0.3.1";
+      src = pkgs.fetchFromGitHub {
+        owner = "quartiq";
+        repo = "mirny";
+        rev = "v${version}";
+        sha256 = "sha256-FbPUgXcUByEnczbnDCh8wYPO+rpSZSAabG1rtvA7mIs=";
+      };
+    };
+    mirny-cpld-legacy-almazny = buildMirnyCpld rec {
       version = "0.2.4";
       src = pkgs.fetchFromGitHub {
         owner = "quartiq";
         repo = "mirny";
         rev = "v${version}";
-        sha256 = "0fyz0g1h1s54zdivkfqhgyhpq7gjkl9kxkcfy3104p2f889l1vgw";
+        sha256 = "sha256-/O1AE0JOXALC8I7NPhOd8h18oX8Qu7lj+6ToAMMD3zs=";
       };
+      patchPhase = "patch -p1 < ${./mirny-legacy-almazny.diff}";
     };
     fastino-fpga = pkgs.stdenv.mkDerivation {
       name = "fastino-fpga";
       src = <fastinoSrc>;
-      buildInputs = [(pkgs.python3.withPackages(ps: [artiqpkgs.migen artiqpkgs.misoc]))] ++ [pkgs.yosys pkgs.nextpnr pkgs.icestorm];
+      buildInputs = [(pkgs.python3.withPackages(ps: [fpgatools.migen fpgatools.misoc]))] ++ [pkgs.yosys pkgs.nextpnr pkgs.icestorm];
       phases = ["buildPhase" "installPhase"];
       buildPhase = "python $src/fastino_phy.py";
       installPhase =
@@ -88,7 +98,7 @@ in
                     ""
       '';
 
-      buildInputs = [ (pkgs.python3.withPackages(ps: [ artiqpkgs.migen artiqpkgs.misoc ])) ] ++ [ vivado ];
+      buildInputs = [ (pkgs.python3.withPackages(ps: [ fpgatools.migen fpgatools.misoc ])) ] ++ [ fpgatools.vivado ];
       buildPhase = "python phaser.py";
       installPhase =
         ''

gluelogic/fpgatools.nix

@@ -0,0 +1,94 @@
+{ pkgs, isePath ? "/opt/Xilinx/14.7/ISE_DS", vivadoPath ? "/opt/Xilinx/Vivado/2022.2" }:
+rec {
+  ise = let
+    makeXilinxEnv = name: pkgs.buildFHSUserEnv {
+      inherit name;
+      targetPkgs = pkgs: (
+        with pkgs; [
+          ncurses5
+          zlib
+          libuuid
+          xorg.libSM
+          xorg.libICE
+          xorg.libXrender
+          xorg.libX11
+          xorg.libXext
+          xorg.libXtst
+          xorg.libXi
+        ]
+      );
+      profile = 
+        ''
+        source ${isePath}/common/.settings64.sh ${isePath}/common
+        source ${isePath}/ISE/.settings64.sh ${isePath}/ISE
+        '';
+      runScript = name;
+    };
+  in
+    pkgs.lib.attrsets.genAttrs ["xst" "ngdbuild" "cpldfit" "taengine" "hprep6"] makeXilinxEnv;
+  vivado = pkgs.buildFHSUserEnv {
+    name = "vivado";
+    targetPkgs = pkgs: (
+      with pkgs; let
+        # Apply patch from https://github.com/nix-community/nix-environments/pull/54
+        # to fix ncurses libtinfo.so's soname issue
+        ncurses' = ncurses5.overrideAttrs (old: {
+          configureFlags = old.configureFlags ++ [ "--with-termlib" ];
+          postFixup = "";
+        });
+      in [
+        libxcrypt-legacy
+        (ncurses'.override { unicodeSupport = false; })
+        zlib
+        libuuid
+        xorg.libSM
+        xorg.libICE
+        xorg.libXrender
+        xorg.libX11
+        xorg.libXext
+        xorg.libXtst
+        xorg.libXi
+      ]
+    );
+    profile = "source ${vivadoPath}/settings64.sh";
+    runScript = "vivado";
+  };
+  migen = pkgs.python3Packages.buildPythonPackage {
+    pname = "migen";
+    version = "unstable-2024-05-02";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "migen";
+      rev = "4790bb577681a8c3a8d226bc196a4e5deb39e4df";
+      sha256 = "sha256-4DCHBUBfc/VA+7NW2Hr0+JP4NnKPru2uVJyZjCCk0Ws=";
+    };
+    format = "pyproject";
+    nativeBuildInputs = [ pkgs.python3Packages.setuptools ];
+    propagatedBuildInputs = with pkgs.python3Packages; [ colorama ];
+  };
+  asyncserial = pkgs.python3Packages.buildPythonPackage {
+    pname = "asyncserial";
+    version = "0.1";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "asyncserial";
+      rev = "d95bc1d6c791b0e9785935d2f62f628eb5cdf98d";
+      sha256 = "0yzkka9jk3612v8gx748x6ziwykq5lr7zmr9wzkcls0v2yilqx9k";
+    };
+    propagatedBuildInputs = with pkgs.python3Packages; [ pyserial ];
+  };
+  misoc = pkgs.python3Packages.buildPythonPackage {
+    pname = "misoc";
+    version = "unstable-2021-10-10";
+    src = pkgs.fetchFromGitHub {
+      owner = "m-labs";
+      repo = "misoc";
+      rev = "f5203e406520874e15ab5d070058ef642fc57fd9";
+      sha256 = "sha256-/2XTejqj0Bo81HaTrlTSWwInnWwsuqnq+CURXbpIrkA=";
+      fetchSubmodules = true;
+    };
+    # TODO: fix misoc bitrot and re-enable tests
+    doCheck = false;
+    propagatedBuildInputs = with pkgs.python3Packages; [ pyserial jinja2 numpy asyncserial migen ];
+  };
+}

gluelogic/ise.nix

@@ -1,31 +0,0 @@
-# Install ISE in /opt and add to /etc/nixos/configuration.nix:
-#  nix.sandboxPaths = ["/opt"];
-
-{ pkgs, isePath ? "/opt/Xilinx/14.7/ISE_DS" }:
-
-let
-  makeXilinxEnv = name: pkgs.buildFHSUserEnv {
-    inherit name;
-    targetPkgs = pkgs: (
-      with pkgs; [
-        ncurses5
-        zlib
-        libuuid
-        xorg.libSM
-        xorg.libICE
-        xorg.libXrender
-        xorg.libX11
-        xorg.libXext
-        xorg.libXtst
-        xorg.libXi
-      ]
-    );
-    profile = 
-      ''
-      source ${isePath}/common/.settings64.sh ${isePath}/common
-      source ${isePath}/ISE/.settings64.sh ${isePath}/ISE
-      '';
-    runScript = name;
-  };
-in
-  pkgs.lib.attrsets.genAttrs ["xst" "ngdbuild" "cpldfit" "taengine" "hprep6"] makeXilinxEnv

gluelogic/mirny-legacy-almazny.diff

@@ -0,0 +1,313 @@
+diff --git a/Makefile b/Makefile
+index 667b8e7..ed97303 100644
+--- a/Makefile
++++ b/Makefile
+@@ -8,9 +8,15 @@ test:
+ .PHONY: build
+ build: build/mirny.vm6
+ 
++.PHONY: legacy_almazny
++legacy_almazny: build/mirny_legacy_almazny.vm6
++
+ build/mirny.vm6: mirny.py mirny_cpld.py
+ 	python mirny_impl.py
+ 
++build/mirny_legacy_almazny.vm6: mirny.py mirny_cpld.py
++	python mirny_impl.py --legacy-almazny
++
+ REV:=$(shell git describe --always --abbrev=8 --dirty)
+ 
+ .PHONY: release
+diff --git a/README.md b/README.md
+index 1bea35a..5e93809 100644
+--- a/README.md
++++ b/README.md
+@@ -1,23 +1,39 @@
+-# Mirny CPLD code
++# Mirny CPLD gateware
+ 
+-[Mirny overview](https://github.com/sinara-hw/mirny/wiki)
++## Hardware
++
++[![Hardware](https://github.com/sinara-hw/mirny/wiki/Mirny_v1.0_top_small.jpg)](https://github.com/sinara-hw/mirny/wiki)
+ 
+ [Mirny Schematics](https://github.com/sinara-hw/mirny/releases)
+ 
+ ## Building
+ 
+-Needs migen and ISE.
++Needs [migen](https://github.com/m-labs/migen) and [Xilinx ISE](https://www.xilinx.com/products/design-tools/ise-design-suite.html). Assumes ISE is installed in ``/opt/Xilinx``.
+ 
+ ```
+ make
+-# and then look at/use flash.sh or make flash
+-
+-# or use fxload and xc3sprog:
+-/sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-3/devnum` && sleep 10 && \
+-xc3sprog -c xpc -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
+-# look for "Verify: Success"
+ ```
+ 
++## Flashing
++
++With Digilent [JTAG HS2](https://store.digilentinc.com/jtag-hs2-programming-cable/) cable:
++
++  - download firmware to dongle. Manually (adjust USB bus as needed):
++  ```
++  /sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-3/devnum`
++  ```
++  or automatically via the ``udev`` rule:
++  ```
++  SUBSYSTEM=="usb", ACTION="add", ATTR{idVendor}=="0403", ATTR{idProduct}=="6014", ATTR{manufacturer}=="Digilent", RUN+="/usr/bin/fxload -v -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D $tempnode"
++  ```
++
++  - install [xc3sprog](http://xc3sprog.sourceforge.net/)
++
++  - ``flash_xc3.sh jtaghs2``
++
++  - look for ``Verify: Success``
++
++
+ # License
+ 
+ GPLv3+
+diff --git a/flash_xc3.sh b/flash_xc3.sh
+index 4c8a94c..c84b4d6 100755
+--- a/flash_xc3.sh
++++ b/flash_xc3.sh
+@@ -1,8 +1,9 @@
+ #!/bin/bash
+ 
+ set -e
+-set -x
+ 
+-/sbin/fxload -t fx2 -I /opt/Xilinx/14.7/ISE_DS/ISE/bin/lin64/xusb_xp2.hex -D /dev/bus/usb/001/*`cat /sys/bus/usb/devices/1-7/devnum`
+-sleep 7
+-../xc3sprog/build/xc3sprog -c xpc -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
++XC3SPROG=xc3sprog
++CABLE=${1-xpc}
++
++set -x
++$XC3SPROG -c $CABLE -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed:w
+diff --git a/mirny.py b/mirny.py
+index 82edca2..6dc2612 100644
+--- a/mirny.py
++++ b/mirny.py
+@@ -153,7 +153,6 @@ class SR(Module):
+             ),
+         ]
+ 
+-
+ def intersection(a, b):
+     (aa, am), (ba, bm) = a, b
+     # TODO
+@@ -182,26 +181,26 @@ class Mirny(Module):
+     SPI
+     ---
+ 
+-    SPI xfer is ADR(7), WE(1), DAT(REG: 16, ATT: 8, PLL: 32)
+-
+-    | ADR | TARGET |
+-    |--------+--------|
+-    | 0 | REG0     |
+-    | 1 | REG1     |
+-    | 2 | REG2     |
+-    | 3 | REG3     |
+-    | 4 | PLL0     |
+-    | 5 | PLL1     |
+-    | 6 | PLL2     |
+-    | 7 | PLL3     |
+-    | 8 | ATT0     |
+-    | 9 | ATT1     |
+-    | a | ATT2     |
+-    | b | ATT3     |
+-    | c | reserved |
+-    | d | reserved |
+-    | e | reserved |
+-    | f | reserved |
++    SPI xfer is ADR(7), WE(1), DAT(REG: 16, ATT: 8, PLL: 32, SR: 8)
++
++    | ADR | TARGET               |
++    |-----+----------------------|
++    | 0   | REG0                 |
++    | 1   | REG1                 |
++    | 2   | REG2                 |
++    | 3   | REG3                 |
++    | 4   | PLL0                 |
++    | 5   | PLL1                 |
++    | 6   | PLL2                 |
++    | 7   | PLL3                 |
++    | 8   | ATT0                 |
++    | 9   | ATT1                 |
++    | a   | ATT2                 |
++    | b   | ATT3                 |
++    | c   | (Legacy Almazny) SR1 |
++    | d   | (Legacy Almazny) SR2 |
++    | e   | (Legacy Almazny) SR3 |
++    | f   | (Legacy Almazny) SR4 |
+ 
+     The SPI interface is CPOL=0, CPHA=0, SPI mode 0, 4-wire, full fuplex.
+ 
+@@ -223,8 +222,8 @@ class Mirny(Module):
+     | Name      | Width | Function                           |
+     |-----------+-------+------------------------------------|
+     | CE_N      | 4     | PLL chip enable (bar)              |
+-    | CLK_SEL   | 2     | Selects CLK source: 0 OSC, 1 MMCX, |
+-    |           |       | 2 reserved, 3 SMA                  |
++    | CLK_SEL   | 2     | Selects CLK source:                |
++    |           |       | 0 OSC, 1 reserved, 2 MMCX, 3 SMA   |
+     | DIV       | 2     | Clock divider configuration:       |
+     |           |       | 0: divide-by-one,                  |
+     |           |       | 1: reserved,                       |
+@@ -234,6 +233,7 @@ class Mirny(Module):
+     | FSEN_N    | 1     | LVDS fail safe, Type 2 (bar)       |
+     | MUXOUT_EEM| 1     | route MUXOUT to EEM[4:8]           |
+     | EEM_MEZZIO| 1     | route EEM[4:8] to MEZZ_IO[0:4]     |
++    | ALMAZNY_OE| 1     | Almazny OE in legacy Almazny mode  |
+ 
+     | Name      | Width | Function                           |
+     |-----------+-------+------------------------------------|
+@@ -250,7 +250,7 @@ class Mirny(Module):
+     The test points expose miscellaneous signals for debugging and are not part
+     of the protocol revision.
+     """
+-    def __init__(self, platform):
++    def __init__(self, platform, legacy_almazny=False):
+         self.eem = eem = []
+         for i in range(8):
+             tsi = TSTriple()
+@@ -292,7 +292,7 @@ class Mirny(Module):
+             self.sr.ext.cs.eq(eem[3].i),
+         ]
+ 
+-        regs = [REG(), REG(width=12), REG(width=4), REG()]
++        regs = [REG(), REG(width=13), REG(width=4), REG()]
+         self.submodules += regs
+         for i, reg in enumerate(regs):
+             self.sr.connect(reg.bus, adr=i, mask=mask)
+@@ -310,23 +310,47 @@ class Mirny(Module):
+         clk = platform.request("clk")
+         clk_div = TSTriple()
+         self.specials += clk_div.get_tristate(clk.div)
+-        # in_sel: 00: XO, 01: MMCX, 10: n/a (SMA+XO), 11: SMA
++        # in_sel: 00: XO, 01: n/a (SMA+XO), 10: MMCX, 11: SMA
+         # dividers: 00(z): 1, 01(z): 1, 10(low): 2, 11(high) 4
+         self.comb += [
+             Cat(clk.in_sel, clk_div.o, clk_div.oe).eq(regs[1].write[4:8]),
+             platform.request("fsen").eq(~regs[1].write[9]),
+         ]
+ 
+-        for i, m in enumerate(platform.request("mezz_io")):
+-            tsi = TSTriple()
+-            self.specials += tsi.get_tristate(m)
++        if legacy_almazny:
++            almazny_io = platform.request("legacy_almazny_common")
++            almazny_adr = 0b1100  # 1100 - and then 1101, 1110, 1111 for sr 1-4
++            ext = Record(ext_layout)
++            self.sr.connect_ext(ext, almazny_adr, almazny_adr)
++            latches = AsyncRst(width=4, reset=0xF)
++            self.submodules += latches
++
+             self.comb += [
+-                tsi.o.eq(regs[3].write[i] | (0 if i >= 4 else
+-                    (regs[1].write[11] & eem[i + 4].i))),
+-                regs[3].read[i].eq(tsi.i),
+-                tsi.oe.eq(regs[3].write[i + 8]),
+-                regs[3].read[i + 8].eq(tsi.oe),
++                latches.ce.eq(ext.cs),
++                almazny_io.clk.eq(ext.sck),
++                almazny_io.mosi.eq(ext.sdi),
++                almazny_io.srclr.eq(1)
+             ]
++            
++            for i in range(4):
++                almazny = platform.request("legacy_almazny", i)
++                self.sync += latches.i[i].eq(self.sr.bus.adr[:2] != i)
++                self.comb += [ 
++                    almazny.latch.eq(latches.o[i]),
++                    almazny.noe.eq(~regs[1].write[12])
++                ]
++
++        else:
++            for i, m in enumerate(platform.request("mezz_io")):
++                tsi = TSTriple()
++                self.specials += tsi.get_tristate(m)
++                self.comb += [
++                    tsi.o.eq(regs[3].write[i] | (0 if i >= 4 else
++                        (regs[1].write[11] & eem[i + 4].i))),
++                    regs[3].read[i].eq(tsi.i),
++                    tsi.oe.eq(regs[3].write[i + 8]),
++                    regs[3].read[i + 8].eq(tsi.oe),
++                ]
+ 
+         for i in range(4):
+             rf_sw = platform.request("rf_sw", i)
+diff --git a/mirny_cpld.py b/mirny_cpld.py
+index 70fc164..a688d89 100644
+--- a/mirny_cpld.py
++++ b/mirny_cpld.py
+@@ -16,9 +16,33 @@ _io = [
+         # fail save LVDS enable, LVDS mode selection
+         # high: type 2 receiver, failsafe low
+         ("fsen", 0, Pins("P80")),
+-
++        
++        # IO from 0 to 7
+         ("mezz_io", 0, Pins("P57 P58 P59 P60 P61 P64 P68 P69")),
+ 
++        # legacy (v1.0-1.1) Almazny pins
++        ("legacy_almazny_common", 0, 
++            Subsignal("mosi", Pins("P94")),
++            Subsignal("clk", Pins("P97")),
++            Subsignal("srclr", Pins("P60")),
++        ),
++        ("legacy_almazny", 0,
++            Subsignal("latch", Pins("P96")),
++            Subsignal("noe", Pins("P95")),
++        ),
++        ("legacy_almazny", 1,
++            Subsignal("latch", Pins("P100")),
++            Subsignal("noe", Pins("P98")),
++        ),
++        ("legacy_almazny", 2,
++            Subsignal("latch", Pins("P92")),
++            Subsignal("noe", Pins("P101")),
++        ),
++        ("legacy_almazny", 3,
++            Subsignal("latch", Pins("P57")),
++            Subsignal("noe", Pins("P58")),
++        ),
++
+         ("clk", 0,
+             Subsignal("div", Pins("P53")),
+             Subsignal("in_sel", Pins("P54 P56")),
+diff --git a/mirny_impl.py b/mirny_impl.py
+index 0c42b0b..d7022dc 100644
+--- a/mirny_impl.py
++++ b/mirny_impl.py
+@@ -1,10 +1,23 @@
++import argparse
++
++def get_argparser():
++    parser = argparse.ArgumentParser(
++        description="Mirny CPLD firmware"
++    )
++    parser.add_argument("--legacy-almazny", action="store_true", default=False)
++
++    return parser
++
+ def main():
+     from mirny_cpld import Platform
+     from mirny import Mirny
+ 
++    args = get_argparser().parse_args()
++
+     p = Platform()
+-    mirny = Mirny(p)
+-    p.build(mirny, build_name="mirny", mode="cpld")
++    mirny = Mirny(p, args.legacy_almazny)
++    build_name = "mirny" if not args.legacy_almazny else "mirny_legacy_almazny"
++    p.build(mirny, build_name=build_name, mode="cpld")
+ 
+ 
+ if __name__ == "__main__":

hydra/artiq.json

@@ -1,93 +1,140 @@
 {
-    "fast-beta": {
+    "main-nac3": {
         "enabled": 1,
+        "type": 1,
         "hidden": false,
-        "description": "Core ARTIQ packages to build fast for CI purposes (beta version)",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "artiq-fast.nix",
+        "description": "Main ARTIQ packages (with NAC3)",
+        "flake": "git+https://github.com/m-labs/artiq.git?ref=nac3",
         "checkinterval": 300,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "artiqSrc": { "type": "git", "value": "git://github.com/m-labs/artiq.git master 1", "emailresponsible": false }
-        }
+        "keepnr": 50
     },
-    "board-generated-beta": {
+    "nac3": {
         "enabled": 1,
+        "type": 1,
         "hidden": false,
-        "description": "Generated code for ARTIQ targets (beta version)",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "artiq-board-generated",
-        "checkinterval": 86400,
-        "schedulingshares": 1,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "sinaraSystemsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/sinara-systems.git master 1", "emailresponsible": false },
-            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast-beta:generated-nix", "emailresponsible": false }
-        }
-    },
-    "full-beta": {
-        "enabled": 1,
-        "hidden": false,
-        "description": "Full set of ARTIQ packages (beta version)",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "artiq-full.nix",
-        "checkinterval": 86400,
-        "schedulingshares": 1,
-        "enableemail": false,
-        "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "beta": { "type": "boolean", "value": "true" },
-            "artiq-board-generated": { "type": "sysbuild", "value": "artiq:board-generated-beta:generated-nix", "emailresponsible": false }
-        }
-    },
-    "fast": {
-        "enabled": 1,
-        "hidden": false,
-        "description": "Core ARTIQ packages to build fast for CI purposes",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "artiq-fast.nix",
+        "description": "Third generation ARTIQ compiler",
+        "flake": "git+https://git.m-labs.hk/M-Labs/nac3.git",
         "checkinterval": 300,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "artiqSrc": { "type": "git", "value": "git://github.com/m-labs/artiq.git release-5 1", "emailresponsible": false }
-        }
+        "keepnr": 50
     },
-    "full": {
+
+    "main-beta": {
         "enabled": 1,
+        "type": 1,
         "hidden": false,
-        "description": "Full set of ARTIQ packages",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "artiq-full.nix",
-        "checkinterval": 86400,
-        "schedulingshares": 1,
+        "description": "Main ARTIQ packages (beta version)",
+        "flake": "git+https://github.com/m-labs/artiq.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "sinaraSystemsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/sinara-systems.git master 1", "emailresponsible": false },
-            "beta": { "type": "boolean", "value": "false" },
-            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast:generated-nix", "emailresponsible": false }
-        }
+        "keepnr": 50
     },
+    "extra-beta": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Additional ARTIQ packages (beta version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+    "zynq-beta": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "ARTIQ on Zynq-7000 (beta version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+
+    "main": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Main ARTIQ packages (stable version)",
+        "flake": "git+https://github.com/m-labs/artiq.git?ref=release-8",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+    "extra": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Additional ARTIQ packages (stable version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git?ref=release-8",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+    "zynq": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "ARTIQ on Zynq-7000 (stable version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git?ref=release-8",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+
+    "main-legacy": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Main ARTIQ packages (legacy version)",
+        "flake": "git+https://github.com/m-labs/artiq.git?ref=release-7",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+    "extra-legacy": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Additional ARTIQ packages (legacy version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-extrapkg.git?ref=release-7",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+    "zynq-legacy": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "ARTIQ on Zynq-7000 (legacy version)",
+        "flake": "git+https://git.m-labs.hk/m-labs/artiq-zynq.git?ref=release-7",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
+    },
+
     "gluelogic": {
         "enabled": 1,
         "hidden": false,
@@ -98,33 +145,39 @@
         "schedulingshares": 1,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 10,
+        "keepnr": 50,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "urukulSrc": { "type": "git", "value": "git://github.com/quartiq/urukul", "emailresponsible": false },
-            "mirnySrc": { "type": "git", "value": "git://github.com/quartiq/mirny", "emailresponsible": false },
-            "fastinoSrc": { "type": "git", "value": "git://github.com/quartiq/fastino", "emailresponsible": false },
-            "phaserSrc": { "type": "git", "value": "git://github.com/quartiq/phaser", "emailresponsible": false }
+            "urukulSrc": { "type": "git", "value": "https://github.com/quartiq/urukul.git", "emailresponsible": false },
+            "mirnySrc": { "type": "git", "value": "https://github.com/quartiq/mirny.git", "emailresponsible": false },
+            "fastinoSrc": { "type": "git", "value": "https://github.com/quartiq/fastino.git", "emailresponsible": false },
+            "phaserSrc": { "type": "git", "value": "https://github.com/quartiq/phaser.git", "emailresponsible": false }
         }
     },
-    "zynq": {
+
+    "sipyco": {
         "enabled": 1,
+        "type": 1,
         "hidden": false,
-        "description": "ARTIQ on Zynq",
-        "nixexprinput": "nixScripts",
-        "nixexprpath": "zynq.nix",
-        "checkinterval": 300,
-        "schedulingshares": 1,
+        "description": "Simple Python Communications",
+        "flake": "github:m-labs/sipyco",
+        "checkinterval": 600,
+        "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
-        "keepnr": 10,
-        "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "artiq-fast": { "type": "sysbuild", "value": "artiq:fast-beta:generated-nix", "emailresponsible": false },
-            "zynq-rs": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/zynq-rs.git", "emailresponsible": false },
-            "artiq-zynq": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/artiq-zynq.git", "emailresponsible": false }
-        }
+        "keepnr": 50
+    },
+    "zynq-rs": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Bare-metal Rust on Zynq-7000",
+        "flake": "git+https://git.m-labs.hk/m-labs/zynq-rs.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 50
     }
 }

hydra/mcu.json

@@ -1,23 +1,57 @@
 {
-    "mcu": {
+    "mcu-contrib": {
         "enabled": 1,
         "hidden": false,
-        "description": "MCU firmware",
+        "description": "Third-party MCU firmware",
         "nixexprinput": "nixScripts",
-        "nixexprpath": "mcu.nix",
-        "checkinterval": 300,
+        "nixexprpath": "mcu-contrib.nix",
+        "checkinterval": 7200,
         "schedulingshares": 10,
         "enableemail": false,
         "emailoverride": "",
         "keepnr": 10,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.09", "emailresponsible": false },
-            "mozillaOverlay": { "type": "git", "value": "git://github.com/mozilla/nixpkgs-mozilla.git", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
+            "mozillaOverlay": { "type": "git", "value": "https://github.com/mozilla/nixpkgs-mozilla.git", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "stabilizerSrc": { "type": "git", "value": "git://github.com/quartiq/stabilizer.git", "emailresponsible": false },
-            "thermostatSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/thermostat.git", "emailresponsible": false },
-            "humpbackDdsSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/humpback-dds.git", "emailresponsible": false },
-            "saymaMmcSrc": { "type": "git", "value": "git://github.com/sinara-hw/openMMC sayma-devel", "emailresponsible": false }
+            "stabilizerSrc": { "type": "git", "value": "https://github.com/quartiq/stabilizer.git main", "emailresponsible": false },
+            "saymaMmcSrc": { "type": "git", "value": "https://github.com/sinara-hw/openMMC.git sayma-devel", "emailresponsible": false }
         }
+    },
+    "thermostat": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Firmware for the Sinara 8451 Thermostat",
+        "flake": "git+https://git.m-labs.hk/M-Labs/thermostat.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 10
+    },
+    "humpback-dds": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Firmware for Humpback-DDS",
+        "flake": "git+https://git.m-labs.hk/M-Labs/humpback-dds.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 10
+    },
+    "kirdy": {
+        "enabled": 1,
+        "type": 1,
+        "hidden": false,
+        "description": "Firmware for the Sinara 1550 Kirdy laser diode driver",
+        "flake": "git+https://git.m-labs.hk/M-Labs/kirdy.git",
+        "checkinterval": 300,
+        "schedulingshares": 10,
+        "enableemail": false,
+        "emailoverride": "",
+        "keepnr": 10
     }
 }

hydra/web.json

@@ -2,7 +2,7 @@
     "web": {
         "enabled": 1,
         "hidden": false,
-        "description": "M-Labs website",
+        "description": "Websites",
         "nixexprinput": "nixScripts",
         "nixexprpath": "web.nix",
         "checkinterval": 300,
@@ -11,9 +11,10 @@
         "emailoverride": "",
         "keepnr": 10,
         "inputs": {
-            "nixpkgs": { "type": "git", "value": "git://github.com/NixOS/nixpkgs nixos-20.03", "emailresponsible": false },
+            "nixpkgs": { "type": "git", "value": "https://github.com/NixOS/nixpkgs.git nixos-24.05", "emailresponsible": false },
             "nixScripts": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/nix-scripts.git", "emailresponsible": false },
-            "webSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/web2019.git", "emailresponsible": false }
+            "webSrc": { "type": "git", "value": "https://git.m-labs.hk/M-Labs/web2019.git", "emailresponsible": false },
+            "nmigenSrc": { "type": "git", "value": "https://gitlab.com/nmigen/nmigen.git", "emailresponsible": false }
         }
     }
 }

mcu-contrib.nix

@@ -1,7 +1,7 @@
 { pkgs ? import <nixpkgs> {} }:
 
 let
-  jobs = import ./mcu/default.nix {
+  jobs = import ./mcu-contrib/default.nix {
     mozillaOverlay = import <mozillaOverlay>;
   };
 in

mcu-contrib/default.nix

@@ -0,0 +1,104 @@
+{ # Use master branch of the overlay by default
+  mozillaOverlay ? import (builtins.fetchTarball https://github.com/mozilla/nixpkgs-mozilla/archive/master.tar.gz),
+}:
+
+let
+  pkgs = import <nixpkgs> { overlays = [ mozillaOverlay ]; };
+  targets = [
+    "thumbv7em-none-eabihf"
+  ];
+  rustManifest = pkgs.fetchurl {
+    url = "https://static.rust-lang.org/dist/2024-06-13/channel-rust-stable.toml";
+    sha256 = "sha256-Ngiz76YP4HTY75GGdH2P+APE/DEIx2R/Dn+BwwOyzZU=";
+  };
+  rustChannelOfTargets = _channel: _date: targets:
+    (pkgs.lib.rustLib.fromManifestFile rustManifest {
+      inherit (pkgs) stdenv lib fetchurl patchelf;
+      }).rust.override {
+      inherit targets;
+      extensions = ["rust-src"];
+    };
+  rust = rustChannelOfTargets "nightly" null targets;
+  rustPlatform = pkgs.recurseIntoAttrs (pkgs.makeRustPlatform {
+    rustc = rust;
+    cargo = rust;
+  });
+
+  buildStm32Firmware = { name, src, cargoDepsName ? name, patchPhase ? "", extraNativeBuildInputs ? [], checkPhase ? "", doCheck ? true, binaryName ? name, extraCargoBuildArgs ? "", outputHashes ? {} }:
+    rustPlatform.buildRustPackage rec {
+      inherit name cargoDepsName;
+      version = "0.0.0";
+
+      inherit src;
+
+      cargoLock = { lockFile = "${src}/Cargo.lock"; inherit outputHashes; };
+
+      inherit patchPhase;
+      nativeBuildInputs = [ pkgs.llvm ] ++ extraNativeBuildInputs;
+      buildPhase = ''
+        export CARGO_HOME=$(mktemp -d cargo-home.XXX)
+        cargo build --release --bin ${binaryName} ${extraCargoBuildArgs}
+      '';
+
+      inherit checkPhase doCheck;
+      # binaryName defaults to the `name` arg (i.e. the Rust package name);
+      # it is used as the Cargo binary filename
+      installPhase = ''
+        mkdir -p $out $out/nix-support
+        cp target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.elf
+        echo file binary-dist $out/${name}.elf >> $out/nix-support/hydra-build-products
+        llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.bin
+        echo file binary-dist $out/${name}.bin >> $out/nix-support/hydra-build-products
+      '';
+
+      dontFixup = true;
+      auditable = false;
+    };
+in
+  pkgs.lib.attrsets.mapAttrs'
+    (name: value: pkgs.lib.attrsets.nameValuePair ("stabilizer-" + name)
+    (buildStm32Firmware ({
+      name = "stabilizer-" + name;
+      # If binaryName is not specified, use the attribute name as binaryName by default.
+      binaryName = name;
+      cargoDepsName = "stabilizer";
+      src = <stabilizerSrc>;
+      patchPhase = ''
+        patch -p1 < ${./pounder-725.diff}
+      '';
+      doCheck = false;
+      outputHashes = {
+        "menu-0.6.0" = "sha256-Zilj27J4a/T/Je2qJr6igFj2OEw0/4fU4f0t+afm4TY=";
+      };
+    } // value))) {
+      dual-iir = {};
+      dual-iir-pounder_v1_0 = {
+        binaryName = "dual-iir";
+        extraCargoBuildArgs = "--features pounder_v1_0";
+      };
+      lockin = {};
+    } //
+  {
+    # openMMC build system breaks if host compiler is not available, so do not use stdenvNoCC here
+    sayma-mmc = pkgs.stdenv.mkDerivation {
+      name = "sayma-mmc";
+      src = <saymaMmcSrc>;
+      phases = [ "unpackPhase" "buildPhase" "installPhase" ];
+      nativeBuildInputs = [ pkgs.cmake pkgs.gcc-arm-embedded ];
+      buildPhase =
+        ''
+        mkdir build
+        cd build
+        cmake .. -DBOARD=sayma -DBOARD_RTM=sayma -DVERSION= -DTARGET_CONTROLLER=LPC1776 -DCMAKE_BUILD_TYPE=Debug
+        make
+        '';
+      installPhase =
+        ''
+        mkdir $out
+        cp out/* $out
+        mkdir -p $out $out/nix-support
+        echo file binary-dist $out/openMMC.axf >> $out/nix-support/hydra-build-products
+        echo file binary-dist $out/openMMC.bin >> $out/nix-support/hydra-build-products
+        '';
+    };
+  }

mcu-contrib/pounder-725.diff

@@ -0,0 +1,811 @@
+diff --git a/ad9959/src/lib.rs b/ad9959/src/lib.rs
+index 025f7d4f..59578cce 100644
+--- a/ad9959/src/lib.rs
++++ b/ad9959/src/lib.rs
+@@ -2,8 +2,24 @@
+ 
+ use bit_field::BitField;
+ use bitflags::bitflags;
++use core::ops::Range;
+ use embedded_hal::{blocking::delay::DelayUs, digital::v2::OutputPin};
+ 
++/// The minimum reference clock input frequency with REFCLK multiplier disabled.
++const MIN_REFCLK_FREQUENCY: f32 = 1e6;
++/// The minimum reference clock input frequency with REFCLK multiplier enabled.
++const MIN_MULTIPLIED_REFCLK_FREQUENCY: f32 = 10e6;
++/// The system clock frequency range with high gain configured for the internal VCO.
++const HIGH_GAIN_VCO_RANGE: Range<f32> = Range {
++    start: 255e6,
++    end: 500e6,
++};
++/// The system clock frequency range with low gain configured for the internal VCO.
++const LOW_GAIN_VCO_RANGE: Range<f32> = Range {
++    start: 100e6,
++    end: 160e6,
++};
++
+ /// A device driver for the AD9959 direct digital synthesis (DDS) chip.
+ ///
+ /// This chip provides four independently controllable digital-to-analog output sinusoids with
+@@ -218,23 +234,17 @@ impl<I: Interface> Ad9959<I> {
+         reference_clock_frequency: f32,
+         multiplier: u8,
+     ) -> Result<f32, Error> {
++        let frequency =
++            validate_clocking(reference_clock_frequency, multiplier)?;
+         self.reference_clock_frequency = reference_clock_frequency;
+ 
+-        if multiplier != 1 && !(4..=20).contains(&multiplier) {
+-            return Err(Error::Bounds);
+-        }
+-
+-        let frequency = multiplier as f32 * self.reference_clock_frequency;
+-        if frequency > 500_000_000.0f32 {
+-            return Err(Error::Frequency);
+-        }
+-
+         // TODO: Update / disable any enabled channels?
+         let mut fr1: [u8; 3] = [0, 0, 0];
+         self.read(Register::FR1, &mut fr1)?;
+         fr1[0].set_bits(2..=6, multiplier);
+ 
+-        let vco_range = frequency > 255e6;
++        let vco_range = HIGH_GAIN_VCO_RANGE.contains(&frequency)
++            || frequency == HIGH_GAIN_VCO_RANGE.end;
+         fr1[0].set_bit(7, vco_range);
+ 
+         self.write(Register::FR1, &fr1)?;
+@@ -365,9 +375,7 @@ impl<I: Interface> Ad9959<I> {
+         channel: Channel,
+         phase_turns: f32,
+     ) -> Result<f32, Error> {
+-        let phase_offset: u16 =
+-            (phase_turns * (1 << 14) as f32) as u16 & 0x3FFFu16;
+-
++        let phase_offset = phase_to_pow(phase_turns)?;
+         self.modify_channel(
+             channel,
+             Register::CPOW0,
+@@ -513,6 +521,108 @@ impl<I: Interface> Ad9959<I> {
+     }
+ }
+ 
++/// Validate the internal system clock configuration of the chip.
++///
++/// Arguments:
++/// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
++/// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
++///
++/// Returns:
++/// The system clock frequency to be configured.
++pub fn validate_clocking(
++    reference_clock_frequency: f32,
++    multiplier: u8,
++) -> Result<f32, Error> {
++    // The REFCLK frequency must be at least 1 MHz with REFCLK multiplier disabled.
++    if reference_clock_frequency < MIN_REFCLK_FREQUENCY {
++        return Err(Error::Bounds);
++    }
++    // If the REFCLK multiplier is enabled, the multiplier (FR1[22:18]) must be between 4 to 20.
++    // Alternatively, the clock multiplier can be disabled. The multiplication factor is 1.
++    if multiplier != 1 && !(4..=20).contains(&multiplier) {
++        return Err(Error::Bounds);
++    }
++    // If the REFCLK multiplier is enabled, the REFCLK frequency must be at least 10 MHz.
++    if multiplier != 1
++        && reference_clock_frequency < MIN_MULTIPLIED_REFCLK_FREQUENCY
++    {
++        return Err(Error::Bounds);
++    }
++    let frequency = multiplier as f32 * reference_clock_frequency;
++    // SYSCLK frequency between 255 MHz and 500 MHz (inclusive) is valid with high range VCO
++    if HIGH_GAIN_VCO_RANGE.contains(&frequency)
++        || frequency == HIGH_GAIN_VCO_RANGE.end
++    {
++        return Ok(frequency);
++    }
++
++    // SYSCLK frequency between 100 MHz and 160 MHz (inclusive) is valid with low range VCO
++    if LOW_GAIN_VCO_RANGE.contains(&frequency)
++        || frequency == LOW_GAIN_VCO_RANGE.end
++    {
++        return Ok(frequency);
++    }
++
++    // When the REFCLK multiplier is disabled, SYSCLK frequency can go below 100 MHz
++    if multiplier == 1 && (0.0..=LOW_GAIN_VCO_RANGE.start).contains(&frequency)
++    {
++        return Ok(frequency);
++    }
++
++    Err(Error::Frequency)
++}
++
++/// Convert and validate frequency into frequency tuning word.
++///
++/// Arguments:
++/// * `dds_frequency` - The DDS frequency to be converted and validated.
++/// * `system_clock_frequency` - The system clock frequency of the AD9959 core.
++///
++/// Returns:
++/// The corresponding frequency tuning word.
++pub fn frequency_to_ftw(
++    dds_frequency: f32,
++    system_clock_frequency: f32,
++) -> Result<u32, Error> {
++    // Output frequency should not exceed the Nyquist's frequency.
++    if !(0.0..=(system_clock_frequency / 2.0)).contains(&dds_frequency) {
++        return Err(Error::Bounds);
++    }
++    // The function for channel frequency is `f_out = FTW * f_s / 2^32`, where FTW is the
++    // frequency tuning word and f_s is the system clock rate.
++    Ok(((dds_frequency / system_clock_frequency) * (1u64 << 32) as f32) as u32)
++}
++
++/// Convert phase into phase offset word.
++///
++/// Arguments:
++/// * `phase_turns` - The normalized number of phase turns of a DDS channel.
++///
++/// Returns:
++/// The corresponding phase offset word.
++pub fn phase_to_pow(phase_turns: f32) -> Result<u16, Error> {
++    Ok((phase_turns * (1 << 14) as f32) as u16 & 0x3FFFu16)
++}
++
++/// Convert amplitude into amplitude control register values.
++///
++/// Arguments:
++/// * `amplitude` - The normalized amplitude of a DDS channel.
++///
++/// Returns:
++/// The corresponding value in the amplitude control register.
++pub fn amplitude_to_acr(amplitude: f32) -> Result<u32, Error> {
++    if !(0.0..=1.0).contains(&amplitude) {
++        return Err(Error::Bounds);
++    }
++
++    let acr: u32 = *0u32
++        .set_bits(0..=9, ((amplitude * (1 << 10) as f32) as u32) & 0x3FF)
++        .set_bit(12, amplitude != 1.0);
++
++    Ok(acr as u32)
++}
++
+ /// Represents a means of serializing a DDS profile for writing to a stream.
+ pub struct ProfileSerializer {
+     // heapless::Vec<u8, 32>, especially its extend_from_slice() is slow
+@@ -568,6 +678,39 @@ impl ProfileSerializer {
+         }
+     }
+ 
++    /// Update the system clock configuration.
++    ///
++    /// # Args
++    /// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
++    /// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
++    ///
++    /// # Limitations
++    /// The correctness of the FR1 register setting code rely on FR1\[0:17\] staying 0.
++    pub fn set_system_clock(
++        &mut self,
++        reference_clock_frequency: f32,
++        multiplier: u8,
++    ) -> Result<f32, Error> {
++        let frequency = reference_clock_frequency * multiplier as f32;
++
++        // The enabled channel will be updated after clock reconfig
++        let mut fr1 = [0u8; 3];
++
++        // The ad9959 crate does not modify FR1[0:17]. These bits keep their default value.
++        // These bits by default are 0.
++        // Reading the register then update is not possible to implement in a serializer, where
++        // many QSPI writes are performed in burst. Switching between read and write requires
++        // breaking the QSPI indirect write mode and switch into the QSPI indirect read mode.
++        fr1[0].set_bits(2..=6, multiplier);
++
++        // Frequencies within the VCO forbidden range (160e6, 255e6) are already rejected.
++        let vco_range = HIGH_GAIN_VCO_RANGE.contains(&frequency);
++        fr1[0].set_bit(7, vco_range);
++
++        self.add_write(Register::FR1, &fr1);
++        Ok(frequency)
++    }
++
+     /// Add a register write to the serialization data.
+     fn add_write(&mut self, register: Register, value: &[u8]) {
+         let data = &mut self.data[self.index..];
+diff --git a/src/bin/dual-iir.rs b/src/bin/dual-iir.rs
+index ea566e14..84bde34a 100644
+--- a/src/bin/dual-iir.rs
++++ b/src/bin/dual-iir.rs
+@@ -28,7 +28,7 @@
+ #![no_std]
+ #![no_main]
+ 
+-use core::mem::MaybeUninit;
++use core::mem::{MaybeUninit, size_of};
+ use core::sync::atomic::{fence, Ordering};
+ use serde::{Deserialize, Serialize};
+ 
+@@ -47,6 +47,8 @@ use stabilizer::{
+         dac::{Dac0Output, Dac1Output, DacCode},
+         hal,
+         signal_generator::{self, SignalGenerator},
++        pounder::{ClockConfig, PounderConfig},
++        setup::PounderDevices as Pounder,
+         timers::SamplingTimer,
+         DigitalInput0, DigitalInput1, SerialTerminal, SystemTimer, Systick,
+         UsbDevice, AFE0, AFE1,
+@@ -179,6 +181,16 @@ pub struct DualIir {
+     /// See [signal_generator::BasicConfig#miniconf]
+     #[tree(depth = 2)]
+     source: [signal_generator::BasicConfig; 2],
++
++    /// Specifies the config for pounder DDS clock configuration, DDS channels & attenuations
++    ///
++    /// # Path
++    /// `pounder`
++    ///
++    /// # Value
++    /// See [PounderConfig#miniconf]
++    #[tree]
++    pounder: Option<PounderConfig>,
+ }
+ 
+ impl Default for DualIir {
+@@ -206,6 +218,8 @@ impl Default for DualIir {
+             source: Default::default(),
+ 
+             stream: Default::default(),
++
++            pounder: None.into(),
+         }
+     }
+ }
+@@ -222,6 +236,7 @@ mod app {
+         active_settings: DualIir,
+         telemetry: TelemetryBuffer,
+         source: [SignalGenerator; 2],
++        pounder: Option<Pounder>,
+     }
+ 
+     #[local]
+@@ -233,6 +248,7 @@ mod app {
+         adcs: (Adc0Input, Adc1Input),
+         dacs: (Dac0Output, Dac1Output),
+         iir_state: [[[f32; 4]; IIR_CASCADE_LENGTH]; 2],
++        dds_clock_state: Option<ClockConfig>,
+         generator: FrameGenerator,
+         cpu_temp_sensor: stabilizer::hardware::cpu_temp_sensor::CpuTempSensor,
+     }
+@@ -242,7 +258,7 @@ mod app {
+         let clock = SystemTimer::new(|| Systick::now().ticks());
+ 
+         // Configure the microcontroller
+-        let (stabilizer, _pounder) = hardware::setup::setup::<Settings, 4>(
++        let (mut stabilizer, pounder) = hardware::setup::setup::<Settings, 4>(
+             c.core,
+             c.device,
+             clock,
+@@ -261,6 +277,13 @@ mod app {
+ 
+         let generator = network.configure_streaming(StreamFormat::AdcDacData);
+ 
++        let dds_clock_state = pounder.as_ref().map(|_| ClockConfig::default());
++        if pounder.is_some() {
++            stabilizer.settings.dual_iir
++                .pounder
++                .replace(PounderConfig::default());
++        }
++
+         let shared = Shared {
+             usb: stabilizer.usb,
+             network,
+@@ -279,6 +302,7 @@ mod app {
+                 ),
+             ],
+             settings: stabilizer.settings,
++            pounder
+         };
+ 
+         let mut local = Local {
+@@ -289,6 +313,7 @@ mod app {
+             adcs: stabilizer.adcs,
+             dacs: stabilizer.dacs,
+             iir_state: [[[0.; 4]; IIR_CASCADE_LENGTH]; 2],
++            dds_clock_state,
+             generator,
+             cpu_temp_sensor: stabilizer.temperature_sensor,
+         };
+@@ -458,7 +483,7 @@ mod app {
+         }
+     }
+ 
+-    #[task(priority = 1, local=[afes], shared=[network, settings, active_settings, source])]
++    #[task(priority = 1, local=[afes, dds_clock_state], shared=[network, settings, active_settings, source, pounder])]
+     async fn settings_update(mut c: settings_update::Context) {
+         c.shared.settings.lock(|settings| {
+             c.local.afes.0.set_gain(settings.dual_iir.afe[0]);
+@@ -480,6 +505,17 @@ mod app {
+                     ),
+                 }
+             }
++        // Update Pounder configurations
++        c.shared.pounder.lock(|pounder| {
++            if let Some(pounder) = pounder {
++                let pounder_settings = settings.dual_iir.pounder.as_ref().unwrap();
++                // let mut clocking = c.local.dds_clock_state;
++                pounder.update_dds(
++                    *pounder_settings,
++                    c.local.dds_clock_state.as_mut().unwrap(),
++                );
++            }
++        });
+ 
+             c.shared
+                 .network
+@@ -491,21 +527,30 @@ mod app {
+         });
+     }
+ 
+-    #[task(priority = 1, shared=[network, settings, telemetry], local=[cpu_temp_sensor])]
++    #[task(priority = 1, shared=[network, settings, telemetry, pounder], local=[cpu_temp_sensor])]
+     async fn telemetry(mut c: telemetry::Context) {
+         loop {
+             let telemetry = c.shared.telemetry.lock(|telemetry| *telemetry);
+ 
+-            let (gains, telemetry_period) =
++            let (gains, telemetry_period, pounder_config) =
+                 c.shared.settings.lock(|settings| {
+-                    (settings.dual_iir.afe, settings.dual_iir.telemetry_period)
++                    (
++                        settings.dual_iir.afe,
++                        settings.dual_iir.telemetry_period,
++                        settings.dual_iir.pounder
++                    )
+                 });
+ 
++            let pounder_telemetry = c.shared.pounder.lock(|pounder| {
++                pounder.as_mut().map(|pdr| pdr.get_telemetry(pounder_config.unwrap()))
++            });
++
+             c.shared.network.lock(|net| {
+                 net.telemetry.publish(&telemetry.finalize(
+                     gains[0],
+                     gains[1],
+                     c.local.cpu_temp_sensor.get_temperature().unwrap(),
++                    pounder_telemetry,
+                 ))
+             });
+ 
+diff --git a/src/bin/lockin.rs b/src/bin/lockin.rs
+index 3ddecd7c..77a7474b 100644
+--- a/src/bin/lockin.rs
++++ b/src/bin/lockin.rs
+@@ -29,7 +29,7 @@
+ 
+ use core::{
+     convert::TryFrom,
+-    mem::MaybeUninit,
++    mem::{MaybeUninit, size_of},
+     sync::atomic::{fence, Ordering},
+ };
+ 
+@@ -547,6 +547,7 @@ mod app {
+                     gains[0],
+                     gains[1],
+                     c.local.cpu_temp_sensor.get_temperature().unwrap(),
++                    None,
+                 ))
+             });
+ 
+diff --git a/src/hardware/pounder/attenuators.rs b/src/hardware/pounder/attenuators.rs
+index cfd08b7f..2570f506 100644
+--- a/src/hardware/pounder/attenuators.rs
++++ b/src/hardware/pounder/attenuators.rs
+@@ -52,10 +52,9 @@ pub trait AttenuatorInterface {
+     fn get_attenuation(&mut self, channel: Channel) -> Result<f32, Error> {
+         let mut channels = [0_u8; 4];
+ 
+-        // Reading the data always shifts data out of the staging registers, so we perform a
+-        // duplicate write-back to ensure the staging register is always equal to the output
+-        // register.
+-        self.transfer_attenuators(&mut channels)?;
++        // Reading the data always shifts data out of the staging registers, so a duplicate
++        // write-back will be performed to ensure the staging register is always equal to the
++        // output register.
+         self.transfer_attenuators(&mut channels)?;
+ 
+         // The attenuation code is stored in the upper 6 bits of the register, where each LSB
+@@ -66,6 +65,9 @@ pub trait AttenuatorInterface {
+         // care) would contain erroneous data.
+         let attenuation_code = (!channels[channel as usize]) >> 2;
+ 
++        // The write-back transfer is performed. Staging register is now restored.
++        self.transfer_attenuators(&mut channels)?;
++
+         // Convert the desired channel code into dB of attenuation.
+         Ok(attenuation_code as f32 / 2.0)
+     }
+diff --git a/src/hardware/pounder/dds_output.rs b/src/hardware/pounder/dds_output.rs
+index 3ae1ce90..cd978b01 100644
+--- a/src/hardware/pounder/dds_output.rs
++++ b/src/hardware/pounder/dds_output.rs
+@@ -55,7 +55,7 @@
+ use log::warn;
+ use stm32h7xx_hal as hal;
+ 
+-use super::{hrtimer::HighResTimerE, QspiInterface};
++use super::{hrtimer::HighResTimerE, Profile, QspiInterface};
+ use ad9959::{Channel, Mode, ProfileSerializer};
+ 
+ /// The DDS profile update stream.
+@@ -157,6 +157,46 @@ impl<'a> ProfileBuilder<'a> {
+         self
+     }
+ 
++    /// Update a number of channels with fully defined profile settings.
++    ///
++    /// # Args
++    /// * `channels` - A set of channels to apply the configuration to.
++    /// * `profile` - The complete DDS profile, which defines the frequency tuning word,
++    ///   amplitude control register & the phase offset word of the channels.
++    /// # Note
++    /// The ACR should be stored in the 3 LSB of the word.
++    /// If amplitude scaling is to be used, the "Amplitude multiplier enable" bit must be set.
++    #[inline]
++    pub fn update_channels_with_profile(
++        &mut self,
++        channels: Channel,
++        profile: Profile,
++    ) -> &mut Self {
++        self.serializer.update_channels(
++            channels,
++            Some(profile.frequency_tuning_word),
++            Some(profile.phase_offset),
++            Some(profile.amplitude_control),
++        );
++        self
++    }
++
++    /// Update the system clock configuration.
++    ///
++    /// # Args
++    /// * `reference_clock_frequency` - The reference clock frequency provided to the AD9959 core.
++    /// * `multiplier` - The frequency multiplier of the system clock. Must be 1 or 4-20.
++    #[inline]
++    pub fn set_system_clock(
++        &mut self,
++        reference_clock_frequency: f32,
++        multiplier: u8,
++    ) -> Result<&mut Self, ad9959::Error> {
++        self.serializer
++            .set_system_clock(reference_clock_frequency, multiplier)?;
++        Ok(self)
++    }
++
+     /// Write the profile to the DDS asynchronously.
+     #[allow(dead_code)]
+     #[inline]
+diff --git a/src/hardware/pounder/mod.rs b/src/hardware/pounder/mod.rs
+index 5bc7e9ff..5b8d5d30 100644
+--- a/src/hardware/pounder/mod.rs
++++ b/src/hardware/pounder/mod.rs
+@@ -1,10 +1,17 @@
+ use self::attenuators::AttenuatorInterface;
+ 
+ use super::hal;
+-use crate::hardware::{shared_adc::AdcChannel, I2c1Proxy};
++use crate::hardware::{setup, shared_adc::AdcChannel, I2c1Proxy};
++use crate::net::telemetry::PounderTelemetry;
++use ad9959::{
++    amplitude_to_acr, frequency_to_ftw, phase_to_pow, validate_clocking,
++};
+ use embedded_hal::blocking::spi::Transfer;
+ use enum_iterator::Sequence;
++use miniconf::Tree;
++use rf_power::PowerMeasurementInterface;
+ use serde::{Deserialize, Serialize};
++use stm32h7xx_hal::time::MegaHertz;
+ 
+ pub mod attenuators;
+ pub mod dds_output;
+@@ -120,40 +127,99 @@ impl From<Channel> for GpioPin {
+     }
+ }
+ 
+-#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
+-pub struct DdsChannelState {
+-    pub phase_offset: f32,
++#[derive(Serialize, Deserialize, Copy, Clone, Debug, Tree)]
++pub struct DdsChannelConfig {
+     pub frequency: f32,
++    pub phase_offset: f32,
+     pub amplitude: f32,
+-    pub enabled: bool,
+ }
+ 
+-#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
+-pub struct ChannelState {
+-    pub parameters: DdsChannelState,
+-    pub attenuation: f32,
++impl Default for DdsChannelConfig {
++    fn default() -> Self {
++        Self {
++            frequency: 0.0,
++            phase_offset: 0.0,
++            amplitude: 0.0,
++        }
++    }
+ }
+ 
+-#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
+-pub struct InputChannelState {
+-    pub attenuation: f32,
+-    pub power: f32,
+-    pub mixer: DdsChannelState,
++/// Represents a fully defined DDS profile, with parameters expressed in machine units
++pub struct Profile {
++    /// A 32-bits representation of DDS frequency in relation to the system clock frequency.
++    /// This value corresponds to the AD9959 CFTW0 register, which specifies the frequency
++    /// of DDS channels.
++    pub frequency_tuning_word: u32,
++    /// The DDS phase offset. It corresponds to the AD9959 CPOW0 register, which specifies
++    /// the phase offset of DDS channels.
++    pub phase_offset: u16,
++    /// Control amplitudes of DDS channels. It corresponds to the AD9959 ACR register, which
++    /// controls the amplitude scaling factor of DDS channels.
++    pub amplitude_control: u32,
++}
++
++impl TryFrom<(ClockConfig, ChannelConfig)> for Profile {
++    type Error = ad9959::Error;
++
++    fn try_from(
++        (clocking, channel): (ClockConfig, ChannelConfig),
++    ) -> Result<Self, Self::Error> {
++        let system_clock_frequency =
++            clocking.reference_clock * clocking.multiplier as f32;
++        Ok(Profile {
++            frequency_tuning_word: frequency_to_ftw(
++                channel.dds.frequency,
++                system_clock_frequency,
++            )?,
++            phase_offset: phase_to_pow(channel.dds.phase_offset)?,
++            amplitude_control: amplitude_to_acr(channel.dds.amplitude)?,
++        })
++    }
+ }
+ 
+-#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
+-pub struct OutputChannelState {
++#[derive(Serialize, Deserialize, Copy, Clone, Debug, Tree)]
++pub struct ChannelConfig {
++    #[tree]
++    pub dds: DdsChannelConfig,
+     pub attenuation: f32,
+-    pub channel: DdsChannelState,
+ }
+ 
+-#[derive(Serialize, Deserialize, Copy, Clone, Debug)]
+-pub struct DdsClockConfig {
++impl Default for ChannelConfig {
++    fn default() -> Self {
++        ChannelConfig {
++            dds: DdsChannelConfig::default(),
++            attenuation: 31.5,
++        }
++    }
++}
++
++#[derive(Serialize, Deserialize, Copy, Clone, Debug, PartialEq, Tree)]
++pub struct ClockConfig {
+     pub multiplier: u8,
+     pub reference_clock: f32,
+     pub external_clock: bool,
+ }
+ 
++impl Default for ClockConfig {
++    fn default() -> Self {
++        Self {
++            multiplier: 5,
++            reference_clock: MegaHertz::MHz(100).to_Hz() as f32,
++            external_clock: false,
++        }
++    }
++}
++
++#[derive(Copy, Clone, Debug, Default, Deserialize, Serialize, Tree)]
++pub struct PounderConfig {
++    #[tree]
++    pub clock: ClockConfig,
++    #[tree(depth = 2)]
++    pub in_channel: [ChannelConfig; 2],
++    #[tree(depth = 2)]
++    pub out_channel: [ChannelConfig; 2],
++}
++
+ impl From<Channel> for ad9959::Channel {
+     /// Translate pounder channels to DDS output channels.
+     fn from(other: Channel) -> Self {
+@@ -585,3 +651,78 @@ impl rf_power::PowerMeasurementInterface for PounderDevices {
+         Ok(adc_scale * 2.048)
+     }
+ }
++
++impl setup::PounderDevices {
++    pub fn update_dds(
++        &mut self,
++        settings: PounderConfig,
++        clocking: &mut ClockConfig,
++    ) {
++        if *clocking != settings.clock {
++            match validate_clocking(
++                settings.clock.reference_clock,
++                settings.clock.multiplier,
++            ) {
++                Ok(_frequency) => {
++                    self.pounder
++                        .set_ext_clk(settings.clock.external_clock)
++                        .unwrap();
++
++                    self.dds_output
++                        .builder()
++                        .set_system_clock(
++                            settings.clock.reference_clock,
++                            settings.clock.multiplier,
++                        )
++                        .unwrap()
++                        .write();
++
++                    *clocking = settings.clock;
++                }
++                Err(err) => {
++                    log::error!("Invalid AD9959 clocking parameters: {:?}", err)
++                }
++            }
++        }
++
++        for (channel_config, pounder_channel) in settings
++            .in_channel
++            .iter()
++            .chain(settings.out_channel.iter())
++            .zip([Channel::In0, Channel::In1, Channel::Out0, Channel::Out1])
++        {
++            match Profile::try_from((*clocking, *channel_config)) {
++                Ok(dds_profile) => {
++                    self.dds_output
++                        .builder()
++                        .update_channels_with_profile(
++                            pounder_channel.into(),
++                            dds_profile,
++                        )
++                        .write();
++
++                    if let Err(err) = self.pounder.set_attenuation(
++                        pounder_channel,
++                        channel_config.attenuation,
++                    ) {
++                        log::error!("Invalid attenuation settings: {:?}", err)
++                    }
++                }
++                Err(err) => {
++                    log::error!("Invalid AD9959 profile settings: {:?}", err)
++                }
++            }
++        }
++    }
++
++    pub fn get_telemetry(&mut self, config: PounderConfig) -> PounderTelemetry {
++        PounderTelemetry {
++            temperature: self.pounder.lm75.read_temperature().unwrap(),
++            input_power: [
++                self.pounder.measure_power(Channel::In0).unwrap(),
++                self.pounder.measure_power(Channel::In1).unwrap(),
++            ],
++            config,
++        }
++    }
++}
+diff --git a/src/net/data_stream.rs b/src/net/data_stream.rs
+index 714ec57f..d442f197 100644
+--- a/src/net/data_stream.rs
++++ b/src/net/data_stream.rs
+@@ -25,7 +25,7 @@
+ 
+ #![allow(non_camel_case_types)] // https://github.com/rust-embedded/heapless/issues/411
+ 
+-use core::{fmt::Write, mem::MaybeUninit};
++use core::{fmt::Write, mem::{MaybeUninit, size_of_val}};
+ use heapless::{
+     box_pool,
+     pool::boxed::{Box, BoxBlock},
+diff --git a/src/net/mod.rs b/src/net/mod.rs
+index 43733fa8..a8b90f86 100644
+--- a/src/net/mod.rs
++++ b/src/net/mod.rs
+@@ -32,14 +32,14 @@ pub type NetworkReference =
+ 
+ pub struct MqttStorage {
+     telemetry: [u8; 2048],
+-    settings: [u8; 1024],
++    settings: [u8; 1536],
+ }
+ 
+ impl Default for MqttStorage {
+     fn default() -> Self {
+         Self {
+             telemetry: [0u8; 2048],
+-            settings: [0u8; 1024],
++            settings: [0u8; 1536],
+         }
+     }
+ }
+diff --git a/src/net/telemetry.rs b/src/net/telemetry.rs
+index c8eb536b..116382a3 100644
+--- a/src/net/telemetry.rs
++++ b/src/net/telemetry.rs
+@@ -16,7 +16,7 @@ use minimq::{DeferredPublication, Publication};
+ use serde::Serialize;
+ 
+ use super::NetworkReference;
+-use crate::hardware::{adc::AdcCode, afe::Gain, dac::DacCode, SystemTimer};
++use crate::hardware::{adc::AdcCode, afe::Gain, dac::DacCode, SystemTimer, pounder::PounderConfig};
+ 
+ /// Default metadata message if formatting errors occur.
+ const DEFAULT_METADATA: &str = "{\"message\":\"Truncated: See USB terminal\"}";
+@@ -68,6 +68,26 @@ pub struct Telemetry {
+ 
+     /// The CPU temperature in degrees Celsius.
+     pub cpu_temp: f32,
++
++    /// Measurements related to Pounder
++    pub pounder: Option<PounderTelemetry>,
++}
++
++/// The structure that holds the telemetry related to Pounder.
++///
++/// # Note
++/// This structure should be generated on-demand by the buffer when required to minimize conversion
++/// overhead.
++#[derive(Copy, Clone, Serialize)]
++pub struct PounderTelemetry {
++    /// The Pounder temperature in degrees Celsius
++    pub temperature: f32,
++
++    /// The detected RF power into IN channels
++    pub input_power: [f32; 2],
++
++    /// The configuration of the clock and DDS channels
++    pub config: PounderConfig,
+ }
+ 
+ impl Default for TelemetryBuffer {
+@@ -87,10 +107,17 @@ impl TelemetryBuffer {
+     /// * `afe0` - The current AFE configuration for channel 0.
+     /// * `afe1` - The current AFE configuration for channel 1.
+     /// * `cpu_temp` - The current CPU temperature.
++    /// * `pounder` - The current Pounder telemetry.
+     ///
+     /// # Returns
+     /// The finalized telemetry structure that can be serialized and reported.
+-    pub fn finalize(self, afe0: Gain, afe1: Gain, cpu_temp: f32) -> Telemetry {
++    pub fn finalize(
++        self,
++        afe0: Gain,
++        afe1: Gain,
++        cpu_temp: f32,
++        pounder: Option<PounderTelemetry>,
++    ) -> Telemetry {
+         let in0_volts = Into::<f32>::into(self.adcs[0]) / afe0.as_multiplier();
+         let in1_volts = Into::<f32>::into(self.adcs[1]) / afe1.as_multiplier();
+ 
+@@ -99,6 +126,7 @@ impl TelemetryBuffer {
+             adcs: [in0_volts, in1_volts],
+             dacs: [self.dacs[0].into(), self.dacs[1].into()],
+             digital_inputs: self.digital_inputs,
++            pounder,
+         }
+     }
+ }

mcu/default.nix

@@ -1,105 +0,0 @@
-{ # Use master branch of the overlay by default
-  mozillaOverlay ? import (builtins.fetchTarball https://github.com/mozilla/nixpkgs-mozilla/archive/master.tar.gz),
-  rustManifest ? ./channel-rust-nightly.toml
-}:
-
-let
-  pkgs = import <nixpkgs> { overlays = [ mozillaOverlay ]; };
-  rustPlatform = pkgs.recurseIntoAttrs (pkgs.callPackage ./rustPlatform.nix {
-    inherit rustManifest;
-  });
-  buildStm32Firmware = { name, src, patchPhase ? "", extraNativeBuildInputs ? [], checkPhase ? "", ... } @ args:
-    let
-      # If binaryName is specified as an arg of buildStm32Firmware,
-      # then the .nix containing the cargoSha256 must be named "cargosha256-${binaryName}.nix";
-      # otherwise, the .nix must be named "cargosha256.nix".
-      cargoSha256Drv = pkgs.runCommand "${name}-cargosha256" { } ''
-        cp "${src}/cargosha256${
-          if (args ? binaryName) then "-" + args.binaryName else ""
-        }.nix" $out
-        '';
-      # If binaryName is specified as an arg of buildStm32Firmware,
-      # then use it as the filename of the ELF generated from `cargo build`;
-      # otherwise, use the `name` arg (i.e. the Rust package name) as the ELF filename.
-      binaryName = if (args ? binaryName) then args.binaryName else name;
-    in
-      rustPlatform.buildRustPackage rec {
-        inherit name;
-        version = "0.0.0";
-
-        inherit src;
-        cargoSha256 = (import cargoSha256Drv);
-
-        inherit patchPhase;
-        nativeBuildInputs = [ pkgs.llvm ] ++ extraNativeBuildInputs;
-        buildPhase = ''
-          export CARGO_HOME=$(mktemp -d cargo-home.XXX)
-          cargo build --release
-        '';
-
-        inherit checkPhase;
-        installPhase = ''
-          mkdir -p $out $out/nix-support
-          cp target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.elf
-          echo file binary-dist $out/${name}.elf >> $out/nix-support/hydra-build-products
-          llvm-objcopy -O binary target/thumbv7em-none-eabihf/release/${binaryName} $out/${name}.bin
-          echo file binary-dist $out/${name}.bin >> $out/nix-support/hydra-build-products
-        '';
-
-        dontFixup = true;
-      };
-  migen = (import ../artiq-fast/pkgs/python-deps.nix { inherit (pkgs) stdenv fetchgit fetchFromGitHub python3Packages; misoc-new = true; }).migen;
-in
-  {
-    stabilizer-dual-iir = buildStm32Firmware {
-      name = "stabilizer-dual-iir";
-      binaryName = "dual-iir";
-      src = <stabilizerSrc>;
-      patchPhase = ''
-        substituteInPlace src/hardware/configuration.rs \
-          --replace "IpAddress::v4(10, 34, 16, 103)" \
-                    "IpAddress::v4(192, 168, 1, 76)" \
-          --replace "Ipv4Address::new(10, 34, 16, 1)" \
-                    "Ipv4Address::new(192, 168, 1, 1)"
-      '';
-    };
-    thermostat = buildStm32Firmware {
-      name = "thermostat";
-      src = <thermostatSrc>;
-      checkPhase = ''
-        cargo test --target=${pkgs.rust.toRustTarget pkgs.stdenv.targetPlatform}
-      '';
-    };
-    humpback-dds = buildStm32Firmware {
-      name = "humpback-dds";
-      src = <humpbackDdsSrc>;
-      extraNativeBuildInputs = [
-        (pkgs.python3.withPackages(ps: [ migen ]))
-        pkgs.yosys
-        pkgs.nextpnr
-        pkgs.icestorm
-      ];
-    };
-    # openMMC build system breaks if host compiler is not available, so do not use stdenvNoCC here
-    sayma-mmc = pkgs.stdenv.mkDerivation {
-      name = "sayma-mmc";
-      src = <saymaMmcSrc>;
-      phases = [ "unpackPhase" "buildPhase" "installPhase" ];
-      nativeBuildInputs = [ pkgs.cmake pkgs.gcc-arm-embedded ];
-      buildPhase =
-        ''
-        mkdir build
-        cd build
-        cmake .. -DBOARD=sayma -DBOARD_RTM=sayma -DVERSION= -DTARGET_CONTROLLER=LPC1776 -DCMAKE_BUILD_TYPE=Debug
-        make
-        '';
-      installPhase =
-        ''
-        mkdir $out
-        cp out/* $out
-        mkdir -p $out $out/nix-support
-        echo file binary-dist $out/openMMC.axf >> $out/nix-support/hydra-build-products
-        echo file binary-dist $out/openMMC.bin >> $out/nix-support/hydra-build-products
-        '';
-    };
-  }

mcu/rustPlatform.nix

@@ -1,23 +0,0 @@
-{ recurseIntoAttrs, stdenv, lib,
-  makeRustPlatform,
-  fetchurl, patchelf,
-  rustManifest ? ./channel-rust-nightly.toml
-}:
-
-let
-  targets = [
-    "thumbv7em-none-eabihf"
-  ];
-  rustChannel =
-    lib.rustLib.fromManifestFile rustManifest {
-      inherit stdenv fetchurl patchelf;
-    };
-  rust =
-    rustChannel.rust.override {
-      inherit targets;
-    };
-in
-makeRustPlatform {
-  rustc = rust;
-  cargo = rust;
-}

web.nix

@@ -1,7 +1,36 @@
 let
    pkgs = import <nixpkgs> {};
-   src = <webSrc>;
+   web-src = <webSrc>;
+   nmigen-src = <nmigenSrc>;
 in
-  {
-    web = pkgs.runCommand "web" {} "cd ${src}; ${pkgs.zola}/bin/zola build -o $out";
+  rec {
+    web = pkgs.runCommand "web" {} "cd ${web-src}; ${pkgs.zola}/bin/zola build -o $out";
+    web-intl = pkgs.runCommand "web-intl" {}
+      ''
+      cd ${web-src}
+      export DOMAINNAME=m-labs-intl.com
+      ${pkgs.zola}/bin/zola build -o $out -u https://$DOMAINNAME
+      '';
+    sphinxcontrib-platformpicker = pkgs.python3Packages.buildPythonPackage rec {
+      pname = "sphinxcontrib-platformpicker";
+      version = "1.3";
+      src = pkgs.fetchFromGitHub {
+        owner = "whitequark";
+        repo = "sphinxcontrib-platformpicker";
+        rev = "v${version}";
+        sha256 = "sha256-qKhi4QqYhU7CbNSpziFacXc/sWWPSuM3Nc/oWPmBivM=";
+       };
+      propagatedBuildInputs = [ pkgs.python3Packages.sphinx ];
+    };
+    nmigen-docs = pkgs.stdenvNoCC.mkDerivation {
+      name = "nmigen-docs";
+      src = nmigen-src;
+      buildInputs = [ (pkgs.python3.withPackages(ps: [ ps.sphinx ps.sphinx_rtd_theme sphinxcontrib-platformpicker ])) ];
+      phases = [ "buildPhase" ];
+      buildPhase =
+        ''
+        export PYTHONPATH=$src
+        sphinx-build -b html $src/docs $out
+        '';
+    };
   }

zynq.nix

@@ -1,65 +0,0 @@
-let
-  pkgs = import <nixpkgs> {};
-  zynq-rs-latest = import <zynq-rs>;
-  artiq-zynq = import <artiq-zynq>;
-  artiq-fast = import <artiq-fast> { inherit pkgs; };
-in
-  (
-    builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) zynq-rs-latest
-  ) // (
-    builtins.mapAttrs (key: value: pkgs.lib.hydraJob value) artiq-zynq
-  ) // {
-    gateware-sim = pkgs.lib.hydraJob (pkgs.stdenv.mkDerivation {
-      name = "gateware-sim";
-      buildInputs = [ artiq-fast.migen artiq-fast.migen-axi artiq-fast.artiq ];
-
-      phases = [ "buildPhase" ];
-
-      buildPhase =
-        ''
-        python -m unittest discover ${<artiq-zynq>}/src/gateware -v
-        touch $out
-        '';
-    });
-    zc706-hitl-tests = pkgs.lib.hydraJob (pkgs.stdenv.mkDerivation {
-      name = "zc706-hitl-tests";
-
-      # requires patched Nix
-      __networked = true;
-
-      buildInputs = [
-        pkgs.netcat pkgs.openssh pkgs.rsync artiq-fast.artiq artiq-fast.artiq-netboot
-      ];
-      phases = [ "buildPhase" ];
-
-      buildPhase =
-        ''
-        echo Power cycling board...
-        (echo b; sleep 5; echo B; sleep 5) | nc -N -w6 192.168.1.31 3131
-        echo Power cycle done.
-
-        export USER=hydra
-        export OPENOCD_ZYNQ=${artiq-zynq.zynq-rs}/openocd
-        export SZL=${(import artiq-zynq.zynq-rs).zc706-szl}/szl.elf
-        pushd ${<artiq-zynq>}
-        bash ${<artiq-zynq>}/remote_run.sh -h rpi-4 -o "-F /dev/null -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -o LogLevel=ERROR -i /opt/hydra_id_rsa" -d ${artiq-zynq.zc706-nist_qc2-jtag}
-        popd
-
-        echo Waiting for the firmware to boot...
-        sleep 15
-
-        echo Running test kernel...
-        artiq_run --device-db ${<artiq-zynq>}/examples/device_db.py ${<artiq-zynq>}/examples/mandelbrot.py
-
-        echo Running ARTIQ unit tests...
-        ARTIQ_ROOT=${<artiq-zynq>}/examples python -m unittest discover artiq.test.coredevice -v
-
-        touch $out
-
-        echo Completed
-
-        (echo b; sleep 5) | nc -N -w6 192.168.1.31 3131
-        echo Board powered off
-        '';
-    });
-  }