qspi flash unfinished...

experiments/src/main.rs

@@ -20,8 +20,10 @@ static mut STACK_CORE1: [u32; 512] = [0; 512];
 
 #[no_mangle]
 pub fn main_core0() {
-    // zynq::clocks::CpuClocks::enable_io(1_250_000_000);
+    // zynq::clocks::Clocks::enable_io(1_250_000_000);
     println!("\nzc706 main");
+    let clocks = zynq::clocks::Clocks::get();
+    println!("CPU Clocks: {}/{}/{}/{}", clocks.cpu_6x4x(), clocks.cpu_3x2x(), clocks.cpu_2x(), clocks.cpu_1x());
     {
         use libregister::RegisterR;
         println!("Boot mode: {:?}", zynq::slcr::RegisterBlock::new().boot_mode.read().boot_mode_pins());
@@ -52,17 +54,36 @@ pub fn main_core0() {
     }
     let mut flash = flash.stop();
 
-    let mut ddr = zynq::ddr::DdrRam::new();
+    for i in 0../*=*/1 {
-    #[cfg(not(feature = "target_zc706"))]
-    ddr.memtest();
-    ram::init_alloc(&mut ddr);
-
-    for i in 0..=1 {
         let mut flash_io = flash.manual_mode(i);
-        // println!("rdcr={:02X}", flash_io.rdcr());
+
+        let mut cr: zynq::flash::CR = flash_io.read_reg();
+        println!("rdcr={:02X}", cr.inner);
+        // if cr.quad() {
+        //     println!("disabling quad mode...");
+        //     cr.set_quad(false);
+        //     let sr1: zynq::flash::SR1 = flash_io.read_reg();
+        //     println!("sr1={:02X}", sr1.inner);
+        //     flash_io.write_regs(sr1, cr);
+        // }
+        // if ! cr.quad() {
+        //     println!("setting quad mode...");
+        //     cr.set_quad(true);
+        //     let sr1: zynq::flash::SR1 = flash_io.read_reg();
+        //     // println!("sr1={:02X}", sr1.inner);
+        //     flash_io.write_regs(sr1, cr);
+        // }
+
         print!("Flash {} ID:", i);
-        for b in flash_io.rdid() {
+        for (i, b) in flash_io.rdid().enumerate() {
             print!(" {:02X}", b);
+            if i % 0x10 == 0xf {
+                println!("");
+            } else if i % 8 == 7 {
+                print!("   ");
+            } else if i % 4 == 3 {
+                print!(" ");
+            }
         }
         println!("");
         print!("Flash {} I/O:", i);
@@ -85,12 +106,28 @@ pub fn main_core0() {
         flash_io.dump("ASP Read", 0x2B);
         flash_io.dump("Password Read", 0xE7);
 
+        for o in 0..8 {
+            const SIZE: u32 = 0x100;
+            println!("WREN");
             flash_io.write_enabled(|flash_io| {
-            flash_io.erase(0);
+                println!("Erase page {}", o);
+                flash_io.erase(o * SIZE);
             });
+            println!("WREN");
             flash_io.write_enabled(|flash_io| {
-            flash_io.program(0, [0x23054223; (0x100 >> 2)].iter().cloned());
+                println!("Program page {}", o);
+                flash_io.program(o * SIZE, [0x26121984; (SIZE >> 2) as usize].iter().cloned());
             });
+        }
+
+        print!("Flash {} I/O:", i);
+        for o in 0..8 {
+            const CHUNK: u32 = 32;
+            for b in flash_io.read(CHUNK * o, CHUNK as usize) {
+                print!(" {:02X}", b);
+            }
+        }
+        println!("");
 
         flash = flash_io.stop();
     }
@@ -119,6 +156,11 @@ pub fn main_core0() {
     }
     println!(".");
 
+    let mut ddr = zynq::ddr::DdrRam::new();
+    // #[cfg(not(feature = "target_zc706"))]
+    ddr.memtest();
+    ram::init_alloc(&mut ddr);
+
     let eth = zynq::eth::Eth::default(HWADDR.clone());
     println!("Eth on");
 

libboard_zynq/src/ddr/mod.rs

@@ -172,9 +172,14 @@ impl DdrRam {
         #[cfg(feature = "target_cora_z7_10")]
         let width = regs::DataBusWidth::Width16bit;
         self.regs.ddrc_ctrl.modify(|_, w| w
-            .soft_rstb(true)
+            .soft_rstb(false)
             .powerdown_en(false)
             .data_bus_width(width)
+            .burst8_refresh(1)
+            .rdwr_idle_gap(1)
+            .dis_rd_bypass(false)
+            .dis_act_bypass(false)
+            .dis_auto_refresh(false)
         );
 
         while self.status() == regs::ControllerStatus::Init {}

libboard_zynq/src/ddr/regs.rs

@@ -1,6 +1,6 @@
 use volatile_register::{RO, RW};
 
-use libregister::{register, register_bit, register_bits_typed};
+use libregister::{register, register_bit, register_bits, register_bits_typed};
 
 #[allow(unused)]
 #[repr(u8)]
@@ -169,7 +169,11 @@ register_bit!(ddrc_ctrl,
               soft_rstb, 0);
 register_bit!(ddrc_ctrl, powerdown_en, 1);
 register_bits_typed!(ddrc_ctrl, data_bus_width, u8, DataBusWidth, 2, 3);
-// (ddrc_ctrl) ...
+register_bits!(ddrc_ctrl, burst8_refresh, u8, 4, 6);
+register_bits!(ddrc_ctrl, rdwr_idle_gap, u8, 7, 13);
+register_bit!(ddrc_ctrl, dis_rd_bypass, 14);
+register_bit!(ddrc_ctrl, dis_act_bypass, 15);
+register_bit!(ddrc_ctrl, dis_auto_refresh, 16);
 
 // Controller operation mode status
 register!(mode_sts_reg,

libboard_zynq/src/flash/mod.rs

@@ -10,16 +10,21 @@ mod regs;
 mod bytes;
 pub use bytes::{BytesTransferExt, BytesTransfer};
 mod spi_flash_register;
-use spi_flash_register::*;
+pub use spi_flash_register::*;
 mod transfer;
 use transfer::Transfer;
 
-const FLASH_BAUD_RATE: u32 = 50_000_000;
+#[cfg(feature = "target_zc706")]
+const FLASH_BAUD_RATE: u32 = 10_000_000;
+#[cfg(feature = "target_cora_z7_10")]
+const FLASH_BAUD_RATE: u32 = 10_000_000;
 /// 16 MB
 pub const SINGLE_CAPACITY: u32 = 0x1000000;
 pub const SECTOR_SIZE: u32 = 0x10000;
 pub const PAGE_SIZE: u32 = 0x100;
 
+/// Write Register
+const INST_WRR: u8 = 0x01;
 /// Instruction: Read Identification
 const INST_RDID: u8 = 0x9F;
 const INST_READ: u8 = 0x03;
@@ -33,8 +38,10 @@ const INST_PP: u8 = 0x02;
 const INST_SE: u8 = 0xD8;
 /// Instruction: Erase 4K Block
 const INST_BE_4K: u8 = 0x20;
+/// Instruction: Clear Status Register
+const INST_CLSR: u8 = 0x30;
 
-#[derive(Clone)]
+#[derive(Clone, Debug)]
 pub enum SpiWord {
     W8(u8),
     W16(u16),
@@ -119,9 +126,11 @@ impl<MODE> Flash<MODE> {
         );
     }
 
-    fn wait_tx_fifo_flush(&mut self) {
+    fn wait_tx_fifo_flush(&mut self) -> u32 {
         self.regs.config.modify(|_, w| w.man_start_com(true));
-        while !self.regs.intr_status.read().tx_fifo_not_full() {}
+        let mut waited = 0;
+        while !self.regs.intr_status.read().tx_fifo_not_full() { waited += 1; }
+        waited
     }
 }
 
@@ -234,7 +243,7 @@ impl Flash<()> {
 
             // Option: Add Feedback Output Clock
             // 7. Configure MIO pin 8 for feedback clock.
-            #[cfg(not(feature = "target_zc706"))]
+            // #[cfg(not(feature = "target_zc706"))]
             slcr.mio_pin_08.write(
                 slcr::MioPin08::zeroed()
                     .l0_sel(true)
@@ -273,9 +282,12 @@ impl Flash<()> {
         while baud_rate_div < 7 && 2u32.pow(1 + baud_rate_div) < divider {
             baud_rate_div += 1;
         }
+        println!("delay: {:08X}", self.regs.delay.read());
 
         self.regs.config.write(regs::Config::zeroed()
             .baud_rate_div(baud_rate_div as u8)
+            .clk_ph(true)
+            .clk_pol(true)
             .mode_sel(true)
             .leg_flsh(true)
             .holdb_dr(true)
@@ -377,9 +389,21 @@ impl Flash<Manual> {
 
     pub fn read_reg<R: SpiFlashRegister>(&mut self) -> R {
         let args = Some(R::inst_code());
-        let transfer = self.transfer(args.into_iter(), 2)
+        let transfer = self.transfer(args.into_iter(), 3)
             .bytes_transfer();
-        R::new(transfer.skip(1).next().unwrap())
+        let b = transfer.skip(1).next().unwrap();
+        R::new(b)
+    }
+
+    pub fn write_regs(&mut self, sr1: SR1, cr: CR) {
+        self.write_enabled(|flash| {
+            let args = [
+                INST_WRR,
+                sr1.inner,
+                cr.inner,
+            ];
+            flash.transfer(args.into_iter().cloned(), 3);
+        });
     }
 
     pub fn read_reg_until<R, F, A>(&mut self, f: F) -> A
@@ -391,7 +415,7 @@ impl Flash<Manual> {
         while result.is_none() {
             let args = Some(R::inst_code());
             for b in self.transfer(args.into_iter(), 32)
-                .bytes_transfer().skip(1) {
+                .bytes_transfer().skip(5) {
                     result = f(R::new(b));
                     
                     if result.is_some() {
@@ -404,19 +428,22 @@ impl Flash<Manual> {
 
     /// Status Register-1 remains `0x00` immediately after invoking a command.
     fn wait_while_sr1_zeroed(&mut self) -> SR1 {
-        self.read_reg_until::<SR1, _, SR1>(|sr1|
+        println!("wait while sr1 0");
+        let sr1 = self.read_reg_until::<SR1, _, SR1>(|sr1|
             if sr1.is_zeroed() {
                 None
             } else {
                 Some(sr1)
             }
-        )
+        );
+        println!("sr1 non-zero: {:02X}", sr1.inner);
+        sr1
     }
 
     /// Read Identification
     pub fn rdid(&mut self) -> core::iter::Skip<BytesTransfer<Transfer<core::option::IntoIter<u32>, u32>>> {
         let args = Some((INST_RDID as u32) << 24);
-        self.transfer(args.into_iter(), 0x44)
+        self.transfer(args.into_iter(), 0x56)
             .bytes_transfer().skip(1)
     }
 
@@ -445,21 +472,23 @@ impl Flash<Manual> {
                 print!(".");
             }
             println!("");
-        } else {
-            println!("erased? sr1={:02X}", sr1.inner);
         }
+        println!("erased? sr1={:02X}", sr1.inner);
     }
 
     pub fn program<I: Iterator<Item=u32>>(&mut self, offset: u32, data: I) {
         {
             let len = 4 + 4 * data.size_hint().0;
+            // let args = Some(SpiWord::W8(INST_PP)).into_iter()
+            //     .chain(Some(SpiWord::W24(offset as u32)).into_iter())
+
             let args = Some(SpiWord::W32(((INST_PP as u32) << 24) | (offset as u32))).into_iter()
                 .chain(data.map(SpiWord::W32));
             self.transfer(args, len);
         }
 
-        // let sr1 = self.wait_while_sr1_zeroed();
+        let sr1 = self.wait_while_sr1_zeroed();
-        let sr1 = self.read_reg::<SR1>();
+        // let sr1 = self.read_reg::<SR1>();
 
         if sr1.e_err() {
             println!("E_ERR");
@@ -477,10 +506,13 @@ impl Flash<Manual> {
     }
 
     pub fn write_enabled<F: Fn(&mut Self) -> R, R>(&mut self, f: F) -> R {
+        let args = Some(INST_CLSR);
+        self.transfer(args.into_iter(), 1);
         // Write Enable
         let args = Some(INST_WREN);
         self.transfer(args.into_iter(), 1);
         self.regs.gpio.modify(|_, w| w.wp_n(true));
+        println!("WPn hi");
         let sr1 = self.wait_while_sr1_zeroed();
         if !sr1.wel() {
             panic!("Cannot write-enable flash");
@@ -491,6 +523,7 @@ impl Flash<Manual> {
         // Write Disable
         let args = Some(INST_WRDI);
         self.transfer(args.into_iter(), 1);
+        println!("WPn lo");
         self.regs.gpio.modify(|_, w| w.wp_n(false));
 
         result

libboard_zynq/src/flash/spi_flash_register.rs

@@ -35,6 +35,18 @@ macro_rules! u8_register {
 }
 
 u8_register!(CR, "Configuration Register", 0x35);
+impl CR {
+    /// quad I/O mode
+    pub fn quad(&self) -> bool {
+        self.inner.get_bit(1)
+    }
+
+    /// set quad I/O mode
+    pub fn set_quad(&mut self, value: bool) {
+        self.inner.set_bit(1, value);
+    }
+}
+
 u8_register!(SR1, "Status Register-1", 0x05);
 impl SR1 {
     /// Write In Progress

libboard_zynq/src/flash/transfer.rs

@@ -1,6 +1,7 @@
 use libregister::{RegisterR, RegisterW, RegisterRW};
 use super::regs;
 use super::{SpiWord, Flash, Manual};
+use crate::{print, println};
 
 pub struct Transfer<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> {
     flash: &'a mut Flash<Manual>,
@@ -31,13 +32,15 @@ impl<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> Transfer<'a, Args, W> {
             let arg = self.args.next()
                 .map(|n| n.into())
                 .unwrap_or(SpiWord::W32(0));
-            match arg {
+
+            // println!("w {:?}", arg);
+            let write_len = match arg {
                 SpiWord::W32(w) => {
                     // println!("txd0 {:08X}", w);
                     unsafe {
                         self.flash.regs.txd0.write(w);
                     }
-                    self.sent += 4;
+                    4
                 }
                 // Only txd0 can be used without flushing
                 _ => {
@@ -46,32 +49,38 @@ impl<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> Transfer<'a, Args, W> {
                         self.flash.wait_tx_fifo_flush();
                     }
 
-                    match arg {
+                    let write_len = match arg {
                         SpiWord::W8(w) => {
                             // println!("txd1 {:02X}", w);
                             unsafe {
                                 self.flash.regs.txd1.write(u32::from(w) << 24);
                             }
-                            self.sent += 1;
+                            1
                         }
                         SpiWord::W16(w) => {
                             unsafe {
                                 self.flash.regs.txd2.write(u32::from(w) << 16);
                             }
-                            self.sent += 2;
+                            2
                         }
                         SpiWord::W24(w) => {
                             unsafe {
                                 self.flash.regs.txd3.write(w << 8);
                             }
-                            self.sent += 3;
+                            3
                         }
                         SpiWord::W32(_) => unreachable!(),
-                    }
+                    };
 
                     self.flash.wait_tx_fifo_flush();
+
+                    write_len
                 }
-            }
+            };
+            self.sent += write_len;
+            // if self.sent % 258 == 0 {
+            //     self.flash.wait_tx_fifo_flush();
+            // }
         }
     }
 
@@ -81,6 +90,7 @@ impl<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> Transfer<'a, Args, W> {
 
     fn read(&mut self) -> u32 {
         let rx = self.flash.regs.rx_data.read();
+        // println!("r 0x{:02X}", rx);
         self.received += 4;
         rx
     }
@@ -93,11 +103,21 @@ impl<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> Drop for Transfer<'a, Args,
             self.read();
         }
 
+        // // Stop
+        // self.flash.regs.enable.write(
+        //     regs::Enable::zeroed()
+        //         .spi_en(false)
+        // );
 
         self.flash.regs.config.modify(|_, w| w
             .pcs(true)
             .man_start_com(false)
         );
+
+        /// Leave PCS high for a few cycles
+        for _ in 0..0x100 {
+            libcortex_a9::asm::nop();
+        }
     }
 }
 
@@ -111,7 +131,10 @@ impl<'a, Args: Iterator<Item = W>, W: Into<SpiWord>> Iterator for Transfer<'a, A
 
         self.fill_tx_fifo();
 
+        // print!("read:");
         while !self.can_read() {}
-        Some(self.read())
+        let b = self.read();
+        // println!(" {:08X}", b);
+        Some(b)
     }
 }