main: Add PrepareForDfu state

- By default, smoltcp by default reset any new connections
    if there is no available socket

flake.nix

@@ -73,7 +73,7 @@
         src = "${self}/pykirdy";
 
         nativeBuildInputs = [ pkgs.qt6.wrapQtAppsHook ];
-        propagatedBuildInputs = [ pkgs.qt6.qtbase ] ++ (with pkgs.python3Packages; [ pyqtgraph pyqt6 qasync pglive aenum]);
+        propagatedBuildInputs = [ pkgs.qt6.qtbase ] ++ (with pkgs.python3Packages; [ pyqtgraph pyqt6 qasync pglive aenum sipyco]);
 
         dontWrapQtApps = true;
         postFixup = ''
@@ -94,7 +94,7 @@
         buildInputs = with pkgs; [
           rust openocd dfu-util glibc
           ] ++ (with python3Packages; [
-            numpy matplotlib pyqtgraph setuptools pyqt6 qasync pglive aenum
+            numpy matplotlib pyqtgraph setuptools pyqt6 qasync pglive aenum sipyco
           ]);
           shellHook=
           ''

pykirdy/asyncio_exmaple.py

@@ -2,147 +2,135 @@ from pprint import pp
 from driver.kirdy import Kirdy, FilterConfig
 import signal
 import time
+import asyncio
 
-"""
-    Enter Device Firmware Upgrade(Dfu) mode
-    Please see README.md for flash instructions.
-"""
-def enter_dfu_mode(kirdy: Kirdy):
-    kirdy.device.dfu()
-    kirdy.end_session()
+async def enter_dfu_mode(kirdy: Kirdy):
+    """
+        Enter Device Firmware Upgrade(Dfu) mode
+        Please refer to README.md for firmware update instructions.
+    """
+    await kirdy.device.dfu()
 
-"""
-    Configure Kirdy to actively report status
-    Press Ctrl + C to exit active report mode
-"""
-def active_report(kirdy: Kirdy):
-    class SignalHandler:
-        def __init__(self):
-            signal.signal(signal.SIGINT, self.exit_gracefully)
-            signal.signal(signal.SIGTERM, self.exit_gracefully)
-        def exit_gracefully(self, signum, frame):
-            kirdy.stop_report_mode()
-
-    signal_handler = SignalHandler()
-
-    for data in kirdy.get_report_stream():
+async def active_report(kirdy: Kirdy):
+    """
+        Configure Kirdy to actively report status to connected socket
+        Press Ctrl + C to exit active report mode
+    """
+    async for data in kirdy.report_mode():
         pp(data)
 
-"""
-    Configure Kirdy network and board specific transconductance settings.
-    These configs are saved to flash immediately after command is processed. 
-"""
-def device_cfg(kirdy: Kirdy):
+async def device_cfg(kirdy: Kirdy):
+    """
+        Configure Kirdy's network and board specific transconductance settings.
+        These configs are saved to flash immediately after command is processed. 
+    """
     # Kirdy rev0_3's gain and transconductance varies between boards to maximize the
     # PD current range resolution.
-    kirdy.device.set_pd_mon_fin_gain(1.0)
-    kirdy.device.set_pd_mon_transconductance(1/1000.0)
+    await kirdy.device.set_pd_mon_fin_gain(1.0)
+    await kirdy.device.set_pd_mon_transconductance(1/1000.0)
 
     # Network Settings will be updated on next reboot.
-    kirdy.device.set_ip_settings(
+    await kirdy.device.set_ip_settings(
         addr="192.168.1.128",
         port=1337,
         prefix_len=24,
         gateway="192.168.1.1"
     )
     # Hard reset Kirdy.
-    kirdy.device.hard_reset()
+    await kirdy.device.hard_reset()
 
-"""
-    Control and config laser diode and thermostat parameters.
-"""
-def ld_thermostat_cfg(kirdy: Kirdy):
-    # Load the laser diode and thermostat settings from flash
-    kirdy.device.restore_settings_from_flash()
+async def ld_thermostat_cfg(kirdy: Kirdy):
+    """
+        Control and config laser diode and thermostat parameters.
+    """
+    # Load the laser diode and thermostat settings from flash memory.
+    await kirdy.device.restore_settings_from_flash()
 
-    # Power off the laser diode and thermostat and clear alarm (if any)
-    kirdy.laser.set_power_on(False)
-    kirdy.laser.clear_alarm()
-    kirdy.thermostat.set_power_on(False)
-    kirdy.thermostat.clear_alarm()
+    # Power off the laser diode & thermostat and clear any asserted alarm
+    await kirdy.laser.set_power_on(False)
+    await kirdy.laser.clear_alarm()
+    await kirdy.thermostat.set_power_on(False)
+    await kirdy.thermostat.clear_alarm()
 
     # Set the laser diode terminals not to be shorted
-    kirdy.laser.set_ld_terms_short(False)
+    await kirdy.laser.set_ld_terms_short(False)
 
     # Do not power up the laser & thermostat during initial startup
-    kirdy.laser.set_default_pwr_on(False)
-    kirdy.thermostat.set_default_pwr_on(False)
+    await kirdy.laser.set_default_pwr_on(False)
+    await kirdy.thermostat.set_default_pwr_on(False)
 
-    kirdy.laser.set_i(0)
+    await kirdy.laser.set_i(0)
 
     # Configure the laser diode output power limit and photodiode parameters
-    # Exceeding the measured power limit triggers overpower protection alarm.
-    # The laser diode power will be turned off while the thermostat power remains unchanged.
-    kirdy.laser.set_ld_pwr_limit(0.0)
-    kirdy.laser.set_pd_mon_dark_current(0.0)
-    kirdy.laser.set_pd_mon_responsitivity(0.0)
+    # Exceeding the power limit triggers overpower protection alarm.
+    # The laser diode power will be cut off upon alarm assertion while the thermostat power remains unchanged.
+    await kirdy.laser.set_ld_pwr_limit(0.0)
+    await kirdy.laser.set_pd_mon_dark_current(0.0)
+    await kirdy.laser.set_pd_mon_responsitivity(0.0)
 
     # Configure the thermostat NTC thermistor parameters.
-    kirdy.thermostat.set_sh_r0(10.0 * 1000)
-    kirdy.thermostat.set_sh_t0(25)
-    kirdy.thermostat.set_sh_beta(3900)
+    await kirdy.thermostat.set_sh_r0(10.0 * 1000)
+    await kirdy.thermostat.set_sh_t0(25)
+    await kirdy.thermostat.set_sh_beta(3900)
 
-    # Configure the thermostat output limits.
-    # The actual output current is limited by the hardware limit set below. 
-    kirdy.thermostat.set_tec_max_cooling_i(1.0)
-    kirdy.thermostat.set_tec_max_heating_i(1.0)
-    kirdy.thermostat.set_tec_max_v(4.0)
+    # Configure the thermostat TEC settings.
+    # The actual output current is limited by value set below. 
+    await kirdy.thermostat.set_tec_max_cooling_i(1.0)
+    await kirdy.thermostat.set_tec_max_heating_i(1.0)
+    await kirdy.thermostat.set_tec_max_v(4.0)
 
-    # Configure the thermostat temperature monitor limit.
-    # Exceeding the limit will trigger over temperature protection alarm.
-    # The laser diode and thermostat power will be turned off.
-    kirdy.thermostat.set_temp_mon_upper_limit(70)
-    kirdy.thermostat.set_temp_mon_lower_limit(0)
+    # Configure the thermostat temperature monitor limits.
+    # Exceeding the temperature limits trigger over temperature protection alarm.
+    # Both laser diode and thermostat power will be cut off upon alarm assertion.
+    await kirdy.thermostat.set_temp_mon_upper_limit(70)
+    await kirdy.thermostat.set_temp_mon_lower_limit(0)
 
-    # Configure the thermostat PID related parameter.
-    # You can configure the PID parameter with the autotune tool.
-    # Here provides an example if it is configured manually.
-    kirdy.thermostat.set_temperature_setpoint(25)
-    kirdy.thermostat.set_pid_kp(0.15668282198105507)
-    kirdy.thermostat.set_pid_ki(0.002135962407793784)
-    kirdy.thermostat.set_pid_kd(0.829254515277143)
-    kirdy.thermostat.set_pid_output_max(1.0)
-    kirdy.thermostat.set_pid_output_min(-1.0)
+    # Configure the thermostat PID parameters.
+    # You can configure the PID parameter by the included autotune script.
+    await kirdy.thermostat.set_temperature_setpoint(25)
+    await kirdy.thermostat.set_pid_kp(0.15668282198105507)
+    await kirdy.thermostat.set_pid_ki(0.002135962407793784)
+    await kirdy.thermostat.set_pid_kd(0.829254515277143)
+    await kirdy.thermostat.set_pid_output_max(1.0)
+    await kirdy.thermostat.set_pid_output_min(-1.0)
 
     # Configure the thermostat ADC Filter Setting / PID Update Rate / Report Rate.
     # The ADC sampling rate determines the report and pid update rate.
     # The chosen filter and sampling rate affects the noise of the readings.
-    # For details, please refer to the AD7172 da`tas`heet.
-    kirdy.thermostat.config_temp_adc_filter(FilterConfig.Sinc5Sinc1With50hz60HzRejection.f16sps)
+    # For details, please refer to the AD7172 datasheet.
+    await kirdy.thermostat.config_temp_adc_filter(FilterConfig.Sinc5Sinc1With50hz60HzRejection.f16sps)
 
     # Configure thermostat to run in PID control mode
-    kirdy.thermostat.set_pid_control_mode()
+    await kirdy.thermostat.set_pid_control_mode()
     
     # When control mode is switched from PID to constant current(CC) control mode,
-    # the thermostat keeps its instantaneous output current unchanged.
+    # thermostat keeps its instantaneous output current unchanged.
     # Thermostat output current should only be set if it is in CC control mode
-    # or the value set will not be overwritten by PID output. 
-    kirdy.thermostat.set_constant_current_control_mode()
-    kirdy.thermostat.set_tec_i_out(0.0)
+    # or the value set will be overwritten by PID output. 
+    await kirdy.thermostat.set_constant_current_control_mode()
+    await kirdy.thermostat.set_tec_i_out(0.0)
 
-    # Save the above settings configured into the flash
-    kirdy.device.save_current_settings_to_flash()
+    # Save the current settings to flash memory
+    await kirdy.device.save_current_settings_to_flash()
 
     # Power on the laser diode and thermostat
-    kirdy.laser.set_power_on(True)
-    kirdy.thermostat.set_power_on(True)
+    await kirdy.laser.set_power_on(True)
+    await kirdy.thermostat.set_power_on(True)
 
-    pp(kirdy.device.get_settings_summary())
-    pp(kirdy.device.get_status_report())
+    pp(await kirdy.device.get_settings_summary())
+    pp(await kirdy.device.get_status_report())
 
-def main():
+async def main():
     kirdy = Kirdy()
     kirdy.start_session(host='192.168.1.128', port=1337)
+    await kirdy.wait_until_connected()
 
-    while not(kirdy.connected()):   
-        pass
-
-    ld_thermostat_cfg(kirdy)
-    # active_report(kirdy)
+    await ld_thermostat_cfg(kirdy)
+    # await active_report(kirdy)
     # await device_cfg(kirdy)
-    # enter_dfu_mode(kirdy)
+    # await enter_dfu_mode(kirdy)
 
-    kirdy.end_session(block=True)
+    await kirdy.end_session()
 
 if __name__ == "__main__":
-    main()
+    asyncio.run(main())

pykirdy/driver/kirdy.py

@@ -1,3 +1,4 @@
+import types
 import socket
 import json
 import logging
@@ -25,6 +26,7 @@ class CmdList:
         SetPdFinGain = _dt.f32
         SetPdTransconductance = _dt.f32
         SetActiveReportMode = _dt.bool
+        GetHwRev = _dt.none
         GetStatusReport = _dt.none
         GetSettingsSummary = _dt.none
         Dfu = _dt.none
@@ -153,15 +155,14 @@ class InvalidCmd(Exception):
     pass
 
 class Device:
-    def __init__(self, send_cmd_handler, send_raw_cmd_handler, read_msg_queue):
+    def __init__(self, send_cmd_handler, send_raw_cmd_handler):
         self._cmd = CmdList.device
         self._send_cmd = send_cmd_handler
         self._send_raw_cmd = send_raw_cmd_handler
-        self._read_msg_queue = read_msg_queue
 
-    def set_ip_settings(self, addr="192.168.1.128", port=1337, prefix_len=24, gateway="192.168.1.1"):
+    async def set_ip_settings(self, addr="192.168.1.128", port=1337, prefix_len=24, gateway="192.168.1.1"):
         """
-            After calling this fn, the ip settings are immediately saved into flash and will be effective on next reboot.
+            Upon command execution, the ip settings are saved into flash and are effective upon next reboot.
         """
         try:
             socket.inet_aton(addr)
@@ -175,7 +176,7 @@ class Device:
         if not(isinstance(port, int) and isinstance(prefix_len, int)):
             raise InvalidDataType
         
-        return self._send_raw_cmd(
+        return await self._send_raw_cmd(
             {
                 "device_cmd": "SetIPSettings",
                 "ip_settings": {
@@ -187,32 +188,45 @@ class Device:
             }
         )
 
-    def set_active_report_mode(self, on):
+    async def set_active_report_mode(self, on):
         """
             Set active report to be on. If it is on, Kirdy will send status report
-            to ALL client socket connections according to the temperature polling rate set.
+            to the client socket according to the temperature polling rate set.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetActiveReportMode, on)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetActiveReportMode, on)
 
-    def set_pd_mon_fin_gain(self, gain):
+    async def set_pd_mon_fin_gain(self, gain):
         """
-            Configure the photodiode monitor final analog front-end stage gain
+            Configure the photodiode monitor final analog front-end stage gain.
                 - gain: unitless
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPdFinGain, gain)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPdFinGain, gain)
 
-    def set_pd_mon_transconductance(self, transconductance):
+    async def set_pd_mon_transconductance(self, transconductance):
         """
-            Configure the photodiode monitor transconductance
+            Configure the photodiode monitor transconductance value.
                 - transconductance: 1/Ohm
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPdTransconductance, transconductance)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPdTransconductance, transconductance)
 
-    def get_status_report(self, sig=None):
+    async def get_hw_rev(self):
         """
-            Get status of all peripherals in a json object
+            Get hardware revision of the connected Kirdy
+
+            {
+                'msg_type': 'HwRev', 
+                'hw_rev': {
+                    'major': 0, 
+                    'minor': 3
+                }
+            }
+        """
+        return await self._send_cmd(self._cmd._target, self._cmd.GetHwRev, msg_type="HwRev")
+
+    async def get_status_report(self, sig=None):
+        """
+            Get status of all peripherals in a json object.
 
-            Example of yielded data::
             {
                 'ts': 227657,                   # Relative Timestamp (ms)
                 'msg_type': 'Report'            # Indicate it is a 'Report' json object
@@ -222,13 +236,17 @@ class Device:
                     'ld_i_set': 0.0,            # Laser Diode Output Current (A)
                     'pd_i': 2.0000002e-06,      # Internal Photodiode Monitor current (A)
                     'pd_pwr': None,             # Power Readings from Internal Photodiode (W). Return None if pd_mon parameter(s) are not defined.
-                    'term_50ohm': 'Is50Ohm'    # Is the Low Frequency Modulation Input's Impedance 50 Ohm? (On/Off)
+                    'term_50ohm': 'On'          # Is the Low Frequency Modulation Input's Impedance 50 Ohm? ("On"/"Off")
                 }, 
                 'thermostat': {
                     'pwr_on': False,            # Tec Power is On (True/False)
                     'pid_engaged': False,       # Is Pid_Engaged. If False, it is in Constant Current Mode (True/False)
                     'temp_mon_status': {        # Temperature Monitor:
-                        'status': 'Off',            # (To be revised)
+                        'status': 'Off',            # "Off": Power is Off 
+                                                    # "ConstantCurrentMode": Thermostat is regulated in CC mode
+                                                    # "PidStartUp": PID Regulation is not stable
+                                                    # "PidStable": PID Regulation is stable and the temperature is within +-1mK to the setpoint
+                                                    # "OverTempAlarm": Overtemperature Alarm is triggered
                         'over_temp_alarm': False    # Was Laser Diode experienced an Overtemperature condition (True/False)
                     }, 
                     'temperature': 25.03344,   # Temperature Readings (Degree Celsius)
@@ -238,15 +256,11 @@ class Device:
                 }
             }
         """
-        if sig is None:
-            self._send_cmd(self._cmd._target, self._cmd.GetStatusReport, msg_type="Report", sig=sig)
-            return self._read_msg_queue()
-        else:
-            return self._send_cmd(self._cmd._target, self._cmd.GetStatusReport, msg_type="Report", sig=sig)
+        return await self._send_cmd(self._cmd._target, self._cmd.GetStatusReport, msg_type="Report", sig=sig)
 
-    def get_settings_summary(self, sig=None):
+    async def get_settings_summary(self, sig=None):
         """
-            Get the current settings of laser and thermostat in a json object
+            Get the current settings of laser and thermostat in a json object.
 
             {
                 'msg_type': 'Settings',             # Indicate it is a 'Settings' json object
@@ -255,13 +269,13 @@ class Device:
                     'ld_drive_current': {           # Laser Diode Output Current(A)
                        'value': 0.0,                    # Value Set
                        'max': 0.3                       # Max Value Settable
-                    ,
+                    },
                     'pd_mon_params': {              # Laser Diode Software Current Limit(A)
                        'responsitivity': None,          # Value Set
                        'i_dark': 0.0                    # Max Value Settable
-                    ,   
-                    'ld_pwr_limit': 0.0             # Laser Diode Power Limit(W)
-                    'ld_terms_short: False          # Is Laser Diode Terminals short? (True/False)
+                    },   
+                    'ld_pwr_limit': 0.0,            # Laser Diode Power Limit(W)
+                    'ld_terms_short: False,         # Is Laser Diode Terminals short? (True/False)
                 }, 
                 'thermostat': {
                     'default_pwr_on': True,         # Power on Thermostat at Startup
@@ -312,106 +326,101 @@ class Device:
                 }
             }
         """
-        if sig is None:
-            self._send_cmd(self._cmd._target, self._cmd.GetSettingsSummary, msg_type="Settings", sig=sig)
-            return self._read_msg_queue()
-        else:
-            return self._send_cmd(self._cmd._target, self._cmd.GetSettingsSummary, msg_type="Settings", sig=sig)
+        return await self._send_cmd(self._cmd._target, self._cmd.GetSettingsSummary, msg_type="Settings", sig=sig)
 
-    def dfu(self):
+    async def dfu(self):
         """
-            Issuing this cmd will HARD RESET the device and 
-            put Kirdy into Dfu mode for flashing firmware.
+            Hard reset and put the connected Kirdy into the Dfu mode for firmware update.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.Dfu, hard_reset=True)
+        return await self._send_cmd(self._cmd._target, self._cmd.Dfu)
 
-    def save_current_settings_to_flash(self):
+    async def save_current_settings_to_flash(self):
         """
             Save the current laser diode and thermostat configurations into flash.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SaveFlashSettings)
+        return await self._send_cmd(self._cmd._target, self._cmd.SaveFlashSettings)
 
-    def restore_settings_from_flash(self):
+    async def restore_settings_from_flash(self):
         """
-            Restore the laser diode and thermostat settings from flash
+            Restore the laser diode and thermostat settings from flash.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.LoadFlashSettings)
+        return await self._send_cmd(self._cmd._target, self._cmd.LoadFlashSettings)
 
-    def hard_reset(self):
+    async def hard_reset(self):
         """
             Hard Reset Kirdy. The socket connection will be closed by Kirdy. 
             Laser diode power and Tec power will be turned off.
-            Kirdy will send out a json({'msg_type': 'HardReset'}) to all sockets indicating. The device is being reset.
+            Kirdy will send out a json({'msg_type': 'HardReset'}) to all sockets before hard reset take place.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.HardReset, hard_reset=True)
+        return await self._send_cmd(self._cmd._target, self._cmd.HardReset)
 
 class Laser:
     def __init__(self, send_cmd_handler):
         self._cmd = CmdList.ld
         self._send_cmd = send_cmd_handler
 
-    def set_power_on(self, on):
+    async def set_power_on(self, on):
         """
             Power Up or Power Down laser diode. Powering up the Laser Diode resets the pwr_excursion status
                 - on (True/False)
         """
         if on:
-            return self._send_cmd(self._cmd._target, self._cmd.PowerUp, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.PowerUp, None)
         else:
-            return self._send_cmd(self._cmd._target, self._cmd.PowerDown, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.PowerDown, None)
 
-    def set_default_pwr_on(self, on):
+    async def set_default_pwr_on(self, on):
         """
-            Set whether laser diode is powered up at Startup
+            Set whether laser diode is powered up at Startup.
                 - on (True/False)
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetDefaultPowerOn, on)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetDefaultPowerOn, on)
     
-    def set_ld_terms_short(self, short):
+    async def set_ld_terms_short(self, short):
         """
             Open/Short laser diode terminals.
                 - on (True/False)
         """
         if short:
-            return self._send_cmd(self._cmd._target, self._cmd.LdTermsShort, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.LdTermsShort, None)
         else:
-            return self._send_cmd(self._cmd._target, self._cmd.LdTermsOpen, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.LdTermsOpen, None)
 
-    def set_i(self, i):
+    async def set_i(self, i):
         """
-            Set laser diode output current: Max(0, Min(i_set, i_soft_limit))
+            Set laser diode output current: Max(0, Min(i_set, 300mA)).
                 - i: A  
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetI, i)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetI, i)
     
-    def set_pd_mon_responsitivity(self, responsitivity):
+    async def set_pd_mon_responsitivity(self, responsitivity):
         """
-            Configure the photodiode monitor responsitivity parameter
+            Configure the photodiode monitor responsitivity parameter.
                 - responsitivity: A/W
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPdResponsitivity, responsitivity)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPdResponsitivity, responsitivity)
 
-    def set_pd_mon_dark_current(self, dark_current):
+    async def set_pd_mon_dark_current(self, dark_current):
         """
-            Configure the photodiode monitor dark current parameter
+            Configure the photodiode monitor dark current parameter.
                 - dark_current: A
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPdDarkCurrent, dark_current)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPdDarkCurrent, dark_current)
 
-    def set_ld_pwr_limit(self, pwr_limit):
+    async def set_ld_pwr_limit(self, pwr_limit):
         """
-            Set power limit for the power excursion monitor
+            Set the power limit for the power excursion monitor.
             If the calculated power with the params of pd_mon > pwr_limit,
             overpower protection is triggered.
                 - pwr_limit: W 
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetLdPwrLimit, pwr_limit)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetLdPwrLimit, pwr_limit)
 
-    def clear_alarm(self):
+    async def clear_alarm(self):
         """
-            Clear the power excursion monitor alarm 
+            Clear the power excursion monitor alarm.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.ClearAlarm)
+        return await self._send_cmd(self._cmd._target, self._cmd.ClearAlarm)
 
 class Thermostat:
     def __init__(self, send_cmd_handler, send_raw_cmd_handler):
@@ -419,158 +428,158 @@ class Thermostat:
         self._send_cmd = send_cmd_handler
         self._send_raw_cmd = send_raw_cmd_handler
 
-    def set_power_on(self, on):
+    async def set_power_on(self, on):
         """
-            Power up or power down thermostat
+            Power up or power down thermostat.
                 - Powering up the thermostat resets the pwr_excursion status
         """
         if on:
-            return self._send_cmd(self._cmd._target, self._cmd.PowerUp, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.PowerUp, None)
         else:
-            return self._send_cmd(self._cmd._target, self._cmd.PowerDown, None)
+            return await self._send_cmd(self._cmd._target, self._cmd.PowerDown, None)
 
-    def set_default_pwr_on(self, on):
+    async def set_default_pwr_on(self, on):
         """
-            Set whether thermostat is powered up at Startup
+            Set whether thermostat is powered up at Startup.
                 - on: (True/False)
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetDefaultPowerOn, on)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetDefaultPowerOn, on)
 
-    def set_tec_max_v(self, max_v):
+    async def set_tec_max_v(self, max_v):
         """
-            Set Tec Maximum Voltage Across the TEC Terminals
+            Set Tec Maximum Voltage Across the TEC Terminals.
                 - max_v: V
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetTecMaxV, max_v)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTecMaxV, max_v)
 
-    def set_tec_max_cooling_i(self, max_i_pos):
+    async def set_tec_max_cooling_i(self, max_i_pos):
         """
             Set Tec maximum cooling current (Settable Range: 0.0 - 1.0)
                 - max_i_pos: A
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetTecMaxIPos, max_i_pos)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTecMaxIPos, max_i_pos)
 
-    def set_tec_max_heating_i(self, max_i_neg):
+    async def set_tec_max_heating_i(self, max_i_neg):
         """
             Set Tec maximum heating current (Settable Range: 0.0 - 1.0)
                 - max_i_neg: A
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetTecMaxINeg, max_i_neg)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTecMaxINeg, max_i_neg)
 
-    def set_tec_i_out(self, i_out):
+    async def set_tec_i_out(self, i_out):
         """
-            Set Tec Output Current
+            Set Tec Output Current (Settable Range: 0.0 - 1.0)
             This cmd is only effective in constant current control mode 
             or your newly set value will be overwritten by PID Controller Output
                 - i_out: A
         """
         if isinstance(i_out, float):
-            return self._send_raw_cmd({"tec_set_i": i_out})
+            return await self._send_raw_cmd({"tec_set_i": i_out})
         elif isinstance(i_out, int):
-            return self._send_raw_cmd({"tec_set_i": float(i_out)})
+            return await self._send_raw_cmd({"tec_set_i": float(i_out)})
         else:
             raise InvalidDataType
 
-    def set_constant_current_control_mode(self):
+    async def set_constant_current_control_mode(self):
         """
             Disable PID Controller and output current can be controlled with set_tec_i_out() cmd.
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidDisEngage, None)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidDisEngage, None)
 
-    def set_temperature_setpoint(self, temperature):
+    async def set_temperature_setpoint(self, temperature):
         """
             Set Temperature Setpoint for PID Controller. This parameter is not active in constant current control mode
                 - temperature: Degree Celsius
         """
 
-        return self._send_cmd(self._cmd._target, self._cmd.SetTemperatureSetpoint, temperature)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTemperatureSetpoint, temperature)
 
-    def set_pid_control_mode(self):
+    async def set_pid_control_mode(self):
         """
             Enable PID Controller. Its PID Update Interval is controlled by the Temperature ADC polling rate.
             Please refer to config_temp_adc_filter for the possible polling rate options
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidEngage, None)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidEngage, None)
 
-    def set_pid_kp(self, kp):
+    async def set_pid_kp(self, kp):
         """
             Set Kp parameter for PID Controller
                 kp: (unitless) 
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidKp, kp)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidKp, kp)
 
-    def set_pid_ki(self, ki):
+    async def set_pid_ki(self, ki):
         """
             Set Ki parameter for PID Controller
                 ki: (unitless) 
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidKi, ki)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidKi, ki)
 
-    def set_pid_kd(self, kd):
+    async def set_pid_kd(self, kd):
         """
             Set Kd parameter for PID Controller
                 kd: (unitless) 
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidKd, kd)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidKd, kd)
 
-    def set_pid_output_max(self, out_max):
+    async def set_pid_output_max(self, out_max):
         """
             Set max output limit at the PID Output
                 - out_max: A
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidOutMax, out_max)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidOutMax, out_max)
     
-    def set_pid_output_min(self, out_min):
+    async def set_pid_output_min(self, out_min):
         """
             Set min output limit at the PID Output
                 - out_min: A
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetPidOutMin, out_min)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetPidOutMin, out_min)
     
-    def set_temp_mon_upper_limit(self, upper_limit):
+    async def set_temp_mon_upper_limit(self, upper_limit):
         """
             Set Temperature Monitor Upper Limit Threshold. Exceeding the limit for too long
             will force the TEC Controller, PID Controller and Laser Diode Power to Shutdown
                 - upper_limit: Degree Celsius
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetTempMonUpperLimit, upper_limit)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTempMonUpperLimit, upper_limit)
 
-    def set_temp_mon_lower_limit(self, lower_limit):
+    async def set_temp_mon_lower_limit(self, lower_limit):
         """
             Set Temperature Monitor Lower Limit Threshold. Exceeding the limit for too long
             will force the TEC Controller, PID Controller and Laser Diode Power to Shutdown
                 - lower_limit: Degree Celsius
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetTempMonLowerLimit, lower_limit)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetTempMonLowerLimit, lower_limit)
 
-    def clear_alarm(self):
+    async def clear_alarm(self):
         """
             Clear the temperature monitor alarm
         """
-        return self._send_cmd(self._cmd._target, self._cmd.ClearAlarm)
+        return await self._send_cmd(self._cmd._target, self._cmd.ClearAlarm)
 
-    def set_sh_t0(self, t0):
+    async def set_sh_t0(self, t0):
         """
             Set t0 Steinhart-Hart parameter for the laser diode NTC 
                 - t0: Degree Celsius
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetShT0, t0)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetShT0, t0)
 
-    def set_sh_r0(self, r0):
+    async def set_sh_r0(self, r0):
         """
             Set r0 Steinhart-Hart parameter for the laser diode NTC
                 - r0: Ohm
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetShR0, r0)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetShR0, r0)
 
-    def set_sh_beta(self, beta):
+    async def set_sh_beta(self, beta):
         """
             Set beta Steinhart-Hart parameter for the laser diode NTC 
                 - beta: (unitless)
         """
-        return self._send_cmd(self._cmd._target, self._cmd.SetShBeta, beta)
+        return await self._send_cmd(self._cmd._target, self._cmd.SetShBeta, beta)
     
-    def config_temp_adc_filter(self, filter_config):
+    async def config_temp_adc_filter(self, filter_config):
         """
             Configure the temperature adc filter type and sampling rate. 
             Please refer to AD7172 datasheet for the usage of various types of filter.
@@ -591,29 +600,38 @@ class Thermostat:
                 filter_config._odr_type(): filter_config,
             }
 
-        return self._send_raw_cmd(cmd)
-
+        return await self._send_raw_cmd(cmd)
 class Kirdy:
     def __init__(self):
-        self.device = Device(self._send_cmd_handler, self._send_raw_cmd_handler, self._get_msg)
-        self.laser = Laser(self._send_cmd_handler)
-        self.thermostat = Thermostat(self._send_cmd_handler, self._send_raw_cmd_handler)
+        self.device = Device(self._send_cmd, self._send_raw_cmd)
+        self.laser = Laser(self._send_cmd)
+        self.thermostat = Thermostat(self._send_cmd, self._send_raw_cmd)
+        self.hw_rev = None
 
-        self._task_queue, self._msg_queue, self._int_msg_queue, self._report_queue = None, None, None, None
+        self._task_queue, self._int_msg_queue, self._report_queue = None, None, None
+        self._timeout = 5.0
         self._writer, self._reader = None, None
         self._event_loop = None
         
-        self._lock = asyncio.Lock()
         self._msg_queue_get_report = False
         self._report_mode_on = False
+        self._state = State.disconnected
+
+        self.read_response_task, self.handler_task = None, None
+        self._lock = asyncio.Lock()
 
         # PyQt Signal
         self._report_sig = None # Dict
         self._connected_sig = None # Bool
+        
+        self.connected_event = None
+
+    def get_hw_rev(self):
+        return self.hw_rev
 
     def set_report_sig(self, sig):
         """
-            Connect a PyQt Signal to the active report output(dict)
+            Connect a PyQt Signal to the active report output(dict). This should be configured before the session is started.
         """
         self._report_sig = sig
 
@@ -625,40 +643,41 @@ class Kirdy:
         """
         self._connected_sig = sig
 
-    def start_session(self, host='192.168.1.128', port=1337, timeout=5.0, con_retry=5.0):
+    def start_session(self, host='192.168.1.128', port=1337):
         """
-            Start Kirdy Connection Session. 
-            A new thread is started to handle TCP connection and task execution in the background.
-            In case of disconnection, all the queued tasks are cleared and the thread retries TCP connection indefinitely.
-            
+            Start Kirdy Connection Session.
+            In case of disconnection, all the queued tasks are cleared and the handler task retries TCP connection indefinitely.
                 - host: Kirdy's IP Address
-                - port: Kirdy's TCP Port
+                - port: Kirdy's Port Number
         """
+        self._host, self._ctrl_port = host, port
         if self._event_loop is None:
-            self._host, self._ctrl_port = host, port
-            self._timeout, self._con_retry = timeout, con_retry
-
-            self._event_loop = asyncio.new_event_loop()
-            self._thread = Thread(target=self._event_loop.run_forever)
-            self._thread.start()
-            asyncio.run_coroutine_threadsafe(self._handler(), self._event_loop)
-            return True
-        else:
-            logging.warning("Helper Thread has been started.")
-            return False
+            try:
+                self._event_loop = asyncio.get_running_loop()
+            except:
+                self._event_loop = asyncio.new_event_loop()
+                self._event_loop.run_forever()
+            self.connected_event = asyncio.Event()
+        self.handler_task = asyncio.create_task(self._handler())
     
-    def end_session(self, block=False):
+    async def end_session(self, block=False):
         """
             Stop Kirdy's TCP connection and its associated thread.
         """
         if self._event_loop is not None:
             if block:
-                while not(self._task_queue.empty()):
-                    pass
-            cancel_task = asyncio.run_coroutine_threadsafe(self._stop_handler(), self._event_loop)
-            while not(cancel_task.done()):
-                pass
-            self._thread.join()
+                await self._task_queue.join()
+
+            if self.read_response_task is not None:
+                self.read_response_task.cancel()
+                await self.read_response_task
+                self.read_response_task = None
+                
+            if self.handler_task is not None:
+                self.handler_task.cancel()
+                await self.handler_task
+                self.handler_task = None
+            
             self._writer = None
 
             if self._connected_sig is not None:
@@ -668,7 +687,7 @@ class Kirdy:
         """
             Return True if client is connecting
         """
-        return not self.connected() and self._event_loop is not None
+        return self._state == State.disconnected and self.read_response_task is not None
 
     def connected(self):
         """
@@ -676,28 +695,43 @@ class Kirdy:
         """
         return self._writer is not None
 
-    def get_report_stream(self):
-        """
-            Start reporting device status in json object.
-        """
-        if self.connected():            
-            self._report_mode_on = True
+    async def wait_until_connected(self):
+        if not(self.connected()):
+            await self.connected_event.wait()
 
-            self.device.set_active_report_mode(True)
+    async def report_mode(self):
+        """
+            Enable and retrieve active report from Kirdy
+        """
+        if self.connected():
+            self._report_mode_on = True
+            await self.device.set_active_report_mode(True)
+            report = None
 
             while self._report_mode_on:
-                report = self._report_queue.get()
-                if isinstance(report, Exception):
-                    raise report
-                yield report
-
-            self.device.set_active_report_mode(False)
+                report = await self._report_queue.get()
+                if not(isinstance(report, dict)):
+                    self.stop_active_report()
+                else:
+                    yield report
+            
+            if isinstance(report, dict):
+                await self.device.set_active_report_mode(False)
         else:
             raise ConnectionError
 
     def stop_report_mode(self):
         self._report_mode_on = False
 
+    def task_dispatcher(self, awaitable_fn):
+        """
+            Enqueue a task to be handled by the handler.
+        """
+        if self.connected():
+            self._task_queue.put_nowait(lambda: awaitable_fn)
+        else:
+            raise ConnectionError
+
     async def _sock_disconnection_handling(self):
         # Reader needn't be closed
         try:
@@ -709,11 +743,6 @@ class Kirdy:
         self._reader = None
         self._writer = None
 
-        for i in range(self._msg_queue.maxsize):
-            if self._msg_queue.full():
-                self._msg_queue.get_nowait()
-            self._msg_queue.put_nowait(None)
-
         for i in range(self._report_queue.maxsize):
             if self._report_queue.full():
                 self._report_queue.get_nowait()
@@ -724,97 +753,93 @@ class Kirdy:
 
     async def _handler(self):
         try:
-            state = State.disconnected
+            self._state = State.disconnected
             first_con = True
             task = None
             while True:
-                if state == State.disconnected:
+                if self._state == State.disconnected:
                     try:
+                        self.hw_rev = None
                         await self.__coninit(self._timeout)
-                        read_response_fut = asyncio.run_coroutine_threadsafe(self._read_response_handler(), self._event_loop)
+                        self.read_response_task = asyncio.create_task(self._read_response_handler())
                         task = None
-                        logging.debug("Connected")
+                        logging.info("Connected to %s:%d", self._host, self._ctrl_port)
+
+                        hw_rev = await self.device.get_hw_rev()
+                        self.hw_rev = hw_rev["hw_rev"]
+
+                        if self._connected_sig is not None:
+                            self._connected_sig.emit(True)
+                        self.connected_event.set()
 
                         # State Transition
-                        state = State.connected
+                        self._state = State.connected
                     except (OSError, TimeoutError):
                         if first_con:
                             first_con = False
-                            logging.warning("Cannot connect to %s:%d. Retrying in the background", self._host, self._ctrl_port)
-                        await asyncio.sleep(self._con_retry)
+                            logging.warning("Cannot connect to %s:%d. Retrying in the background.", self._host, self._ctrl_port)
+                        await asyncio.sleep(5.0)
 
-                elif state == State.connected:
+                elif self._state == State.connected:
                     try:
                         task = await self._task_queue.get()
                         if isinstance(task, Exception):
                             raise task
-                        
-                        response = await asyncio.wait_for(task(), self._timeout) 
-                        if response is not None:
-                            if response["msg_type"] != "Acknowledge":
-                                self._msg_queue.put_nowait(response)
+                        await task()
+                        self._task_queue.task_done()
 
-                    except (TimeoutError, ConnectionResetError):
-                        logging.warning("Kirdy connection is dropped.")
+                    except (TimeoutError, ConnectionResetError, ConnectionError):
+                        logging.warning("Connection to Kirdy is dropped.")
                         first_con = True
-                        read_response_fut.cancel()
-                        await self._sock_disconnection_handling()
-                        
-                        # State Transition
-                        state = State.disconnected
+                        self.read_response_task.cancel()
 
+                        # State Transition
+                        self._state = State.disconnected
+                        await self._sock_disconnection_handling()
         except asyncio.exceptions.CancelledError:
-            logging.debug("Handler is canceling")
+            pass
         except:
-            logging.debug("Handler experienced an error. Exiting.", exc_info=True)
+            logging.warning("Handler experienced an error.", exc_info=True)
         await self._sock_disconnection_handling()
-        if self._event_loop is not None:
-            self._event_loop.call_soon_threadsafe(self._event_loop.stop)
-            self._event_loop = None
 
     async def _read_response_handler(self):
         try:
             while True:
                 if self._report_mode_on:
-                    responses = await asyncio.wait_for(self._read_response(), 5.0)
+                    response = await asyncio.wait_for(self._read_response(), self._timeout)
                 else:
-                    responses = await self._read_response()
-                for response in responses:
-                    if response["msg_type"] == 'Report' and not self._msg_queue_get_report:
-                        if self._report_sig is None:
-                            if self._report_queue.full():
-                                self._report_queue.get_nowait()
-                            self._report_queue.put_nowait(response)
-                        else:
-                            self._report_sig.emit(response)
+                    response = await self._read_response()
+
+                if response["msg_type"] == 'HardReset':
+                    logging.warn("Kirdy is being hard reset.")
+                    raise asyncio.exceptions.CancelledError
+                if response["msg_type"] == 'Dfu':
+                    logging.warn("Kirdy enters Dfu Mode.")
+                    asyncio.create_task(self.end_session())
+                if response["msg_type"] == 'ConnectionClose':
+                    logging.warn("Kirdy runs out of TCP sockets and closes this connected socket.")
+                    asyncio.create_task(self.end_session())
+                if response["msg_type"] == 'Report' and not self._msg_queue_get_report:
+                    if self._report_sig is None:
+                        self._report_queue.put_nowait_overwrite(response)
                     else:
-                        if self._msg_queue_get_report:
-                            async with self._lock:
-                                self._msg_queue_get_report = False
-                        if self._int_msg_queue.full():
-                            logging.debug("_int_msg_queue is full")
-                            self._int_msg_queue.get_nowait()
-                        self._int_msg_queue.put_nowait(response)
+                        self._report_sig.emit(response)
+                else:
+                    if self._msg_queue_get_report:
+                        self._msg_queue_get_report = False
+                    self._int_msg_queue.put_nowait_overwrite(response)
         except asyncio.exceptions.CancelledError:
-            logging.debug("Read Response Handler is canceling")
-        except TimeoutError:
-            logging.warning("Read active report response timeout")
-            if self._task_queue.full():
-                logging.debug("_int_msg_queue is full")
-                self._task_queue.get_nowait()
-            self._task_queue.put_nowait(TimeoutError())
-        except ConnectionResetError:
-            logging.warning("Connection Reset by peer")
-            if self._task_queue.full():
-                logging.debug("_int_msg_queue is full")
-                self._task_queue.get_nowait()
-            self._task_queue.put_nowait(ConnectionResetError())
-        except:
+            pass
+        except (TimeoutError, ConnectionResetError, ConnectionError) as exec:
+            self._task_queue.put_nowait_overwrite(exec)
+            self._int_msg_queue.put_nowait_overwrite(exec)
+        except Exception as exec:
             logging.warn("Read Response Handler experienced an error. Exiting.", exc_info=True)
-        
+            self._task_queue.put_nowait_overwrite(exec)
+            self._int_msg_queue.put_nowait_overwrite(exec)
         if self._report_mode_on:
             self._report_mode_on = False
-            self._report_queue.put_nowait(TimeoutError)
+            self._report_queue.put_nowait_overwrite(TimeoutError)
 
     async def _stop_handler(self):
         for task in asyncio.all_tasks():
@@ -822,71 +847,52 @@ class Kirdy:
         await asyncio.gather(*asyncio.all_tasks(), loop=self._event_loop)
 
     async def __coninit(self, timeout):
-        self._task_queue = asyncio.Queue(maxsize=64)
+        def _put_nowait_overwrite(self, item):
+            if self.full():
+                self.get_nowait()
+            self.put_nowait(item)
+        asyncio.Queue.put_nowait_overwrite = _put_nowait_overwrite
+
+        if self._task_queue is not None:
+            while not(self._task_queue.empty()):
+                task = self._task_queue.get_nowait()
+                if isinstance(task, types.FunctionType):
+                    task().close()
+        else:
+            self._task_queue = asyncio.Queue(maxsize=16)
         self._int_msg_queue = asyncio.Queue(maxsize=4)
-        self._msg_queue = queue.Queue(maxsize=64)
-        self._report_queue = queue.Queue(maxsize=16)
+        self._report_queue = asyncio.Queue(maxsize=16)
 
         self._reader, self._writer = await asyncio.wait_for(asyncio.open_connection(self._host, self._ctrl_port), timeout)
         writer_sock = self._writer.get_extra_info("socket")
         writer_sock.setsockopt(socket.IPPROTO_TCP, socket.TCP_NODELAY, 1)
-
-        if self._connected_sig is not None:
-            self._connected_sig.emit(True)
         
-    async def _read_response(self, buffer_size=16384):
+    async def _read_response(self):
         raw_response = b''
         while len(raw_response) == 0:
             # Ignore 0 size packet
-            raw_response = await self._reader.read(buffer_size)
+            raw_response = await self._reader.readuntil()
         response = raw_response.decode('utf-8', errors='ignore').split("\n")
-        response = response[:-1]
-
-        items = []
-        for item in response:
-            items.append(json.loads(item))
-        return items
-
-    def _get_msg(self):
-        msg = self._msg_queue.get()
-        return msg
-
-    def _send_raw_cmd_handler(self, cmd, msg_type="Acknowledge", sig=None):
-        if self.connected():
-            self._event_loop.call_soon_threadsafe(self._task_queue.put_nowait, lambda: self._send_raw_cmd(cmd, msg_type, sig=sig))
-        else:
-            raise ConnectionError
+        return json.loads(response[0])
     
-    # If the cmd involves a cmd specific data type, 
-    #   checking is done separately within the functions being called
-    async def _send_raw_cmd(self, cmd, msg_type, sig=None):
+    async def _send_raw_cmd(self, cmd, msg_type="Acknowledge", sig=None):
         if self.connected():
-            self._writer.write(bytes(json.dumps(cmd), "UTF-8"))
-            await self._writer.drain()
-            response = await self._int_msg_queue.get()
-            if response["msg_type"] == msg_type:
+            async with self._lock:
+                self._writer.write(bytes(json.dumps(cmd), "UTF-8"))
+                await self._writer.drain()
+                msg = await asyncio.wait_for(self._int_msg_queue.get(), self._timeout)
+
+            if msg["msg_type"] == msg_type:
                 if sig is not None:
-                    sig.emit(response)
+                    sig.emit(msg)
                     return {"msg_type": "Acknowledge"}
-                return response
+                return msg
             else:
                 raise InvalidCmd
         else:
             raise ConnectionError
 
-    def _send_cmd_handler(self, target, cmd, data=None, msg_type="Acknowledge", sig=None, hard_reset=False):
-        if self.connected():
-            if hard_reset:
-                while not(self._task_queue.empty()):
-                    pass
-            self._event_loop.call_soon_threadsafe(self._task_queue.put_nowait, lambda: self._send_cmd(target, cmd, data, msg_type, sig=sig))
-            if hard_reset:
-                # Wait 1s for Kirdy to hard reset
-                time.sleep(1.0)
-        else:
-            raise ConnectionError
-
-    async def _send_cmd(self, target, cmd, data, msg_type, sig=None):
+    async def _send_cmd(self, target, cmd, data=None, msg_type="Acknowledge", sig=None):
         cmd_dict = {}
         cmd_dict[target] = cmd.name
 
@@ -904,17 +910,21 @@ class Kirdy:
             pass
 
         if msg_type == 'Report':
-            async with self._lock:
-                self._msg_queue_get_report = True
+            self._msg_queue_get_report = True
 
-        self._writer.write(bytes(json.dumps(cmd_dict), "UTF-8"))
-        await self._writer.drain()
+        async with self._lock:
+            self._writer.write(bytes(json.dumps(cmd_dict), "UTF-8"))
+            await self._writer.drain()
+
+            msg = await asyncio.wait_for(self._int_msg_queue.get(), self._timeout)
+            if isinstance(msg, Exception):
+                raise msg
 
-        msg = await self._int_msg_queue.get()
         if msg['msg_type'] == msg_type:
             if sig is not None:
                 sig.emit(msg)
                 return {"msg_type": "Acknowledge"}
-            return msg
+            else:
+                return msg
         else:
             raise InvalidCmd

pykirdy/kirdy_qt.py

@@ -20,7 +20,7 @@ import logging
 import asyncio
 from driver.kirdy import Kirdy as Kirdy_Driver
 import qasync
-from qasync import asyncClose
+from qasync import asyncClose, asyncSlot
 from collections import deque
 from datetime import datetime, timezone, timedelta
 from time import time
@@ -96,15 +96,16 @@ class Kirdy(QObject):
     def end_session(self):
         if self._timer.isActive():
             self._timer.stop()
-        self._kirdy.end_session()
+        asyncio.get_running_loop().create_task(self._kirdy.end_session())
 
     @pyqtSlot(bool)
     def connected_setup(self, connected):
         if connected:
-            self._kirdy.device.set_active_report_mode(True)
+            self._kirdy.task_dispatcher(self._kirdy.device.set_active_report_mode(True))
+            self._kirdy._report_mode_on = True
 
     def timerEvent(self, event):
-        self._kirdy.device.get_settings_summary(sig=self.setting_update_sig)
+        self._kirdy.task_dispatcher(self._kirdy.device.get_settings_summary(sig=self.setting_update_sig))
 
     @pyqtSlot(bool)
     def start_polling(self, start):
@@ -127,6 +128,9 @@ class Kirdy(QObject):
             self.start_polling()
         else:
             logging.debug("Attempt to update polling timer when it is stopped")
+    
+    def get_hw_rev(self):
+        return self._kirdy.get_hw_rev()
 
 class Graphs:
     def __init__(self, ld_i_set_graph, pd_mon_pwr_graph, tec_i_graph, tec_temp_graph, max_samples=1000):
@@ -524,12 +528,12 @@ class MainWindow(QtWidgets.QMainWindow):
     def setup_menu_bar(self):
         @pyqtSlot(bool)
         def about_kirdy(_):
-            # TODO: Replace the hardware revision placeholder
+            hw_rev = self.kirdy_handler.get_hw_rev()
             QtWidgets.QMessageBox.about(
                 self,
                 "About Kirdy",
                 f"""
-                <h1>Sinara 1550 Kirdy v"major rev"."minor rev"</h1>
+                <h1>Sinara 1550 Kirdy v{hw_rev["major"]}.{hw_rev["minor"]}</h1>
                 """
             )
         self.menu_action_about_kirdy.triggered.connect(about_kirdy)
@@ -548,19 +552,19 @@ class MainWindow(QtWidgets.QMainWindow):
 
         @pyqtSlot(bool)
         def dfu_mode(_):
-            self.kirdy.device.dfu()
+            self.kirdy.task_dispatcher(self.kirdy.device.dfu())
             self.kirdy_handler.end_session()
         self.menu_action_dfu_mode.triggered.connect(dfu_mode)
 
         @pyqtSlot(bool)
         def reset_kirdy(_):
-            self.kirdy.device.hard_reset()
+            self.kirdy.task_dispatcher(self.kirdy.device.hard_reset())
             self.kirdy_handler.end_session()
         self.menu_action_hard_reset.triggered.connect(reset_kirdy)
 
         @pyqtSlot(bool)
         def save_settings(_):
-            self.kirdy.device.save_current_settings_to_flash()
+            self.kirdy.task_dispatcher(self.kirdy.device.save_current_settings_to_flash())
             saved = QtWidgets.QMessageBox(self)
             saved.setWindowTitle("Config saved")
             saved.setText(f"Laser diode and thermostat configs have been saved into flash.")
@@ -570,7 +574,7 @@ class MainWindow(QtWidgets.QMainWindow):
 
         @pyqtSlot(bool)
         def load_settings(_):
-            self.kirdy.device.restore_settings_from_flash()
+            self.kirdy.task_dispatcher(self.kirdy.device.restore_settings_from_flash())
             loaded = QtWidgets.QMessageBox(self)
             loaded.setWindowTitle("Config loaded")
             loaded.setText(f"Laser Diode and Thermostat configs have been loaded from flash.")
@@ -596,32 +600,32 @@ class MainWindow(QtWidgets.QMainWindow):
     def _set_up_ctrl_btns(self):
         @pyqtSlot(bool)
         def ld_pwr_on(_):
-            self.kirdy.laser.set_power_on(True)
+            self.kirdy.task_dispatcher(self.kirdy.laser.set_power_on(True))
         self.ld_pwr_on_btn.clicked.connect(ld_pwr_on)
 
         @pyqtSlot(bool)
         def ld_pwr_off(_):
-            self.kirdy.laser.set_power_on(False)
+            self.kirdy.task_dispatcher(self.kirdy.laser.set_power_on(False))
         self.ld_pwr_off_btn.clicked.connect(ld_pwr_off)
         
         @pyqtSlot(bool)
         def ld_clear_alarm(_):
-            self.kirdy.laser.clear_alarm()
+            self.kirdy.task_dispatcher(self.kirdy.laser.clear_alarm())
         self.ld_clear_alarm_btn.clicked.connect(ld_clear_alarm)
 
         @pyqtSlot(bool)
         def tec_pwr_on(_):
-            self.kirdy.thermostat.set_power_on(True)
+            self.kirdy.task_dispatcher(self.kirdy.thermostat.set_power_on(True))
         self.tec_pwr_on_btn.clicked.connect(tec_pwr_on)
 
         @pyqtSlot(bool)
         def tec_pwr_off(_):
-            self.kirdy.thermostat.set_power_on(False)
+            self.kirdy.task_dispatcher(self.kirdy.thermostat.set_power_on(False))
         self.tec_pwr_off_btn.clicked.connect(tec_pwr_off)
 
         @pyqtSlot(bool)
         def tec_clear_alarm(_):
-            self.kirdy.thermostat.clear_alarm()
+            self.kirdy.task_dispatcher(self.kirdy.thermostat.clear_alarm())
         self.tec_clear_alarm_btn.clicked.connect(tec_clear_alarm)
 
     def _set_up_plot_menu(self):
@@ -665,11 +669,11 @@ class MainWindow(QtWidgets.QMainWindow):
         tree.setParameters(self.params[3], showTop=False)
         self.params[3].sigTreeStateChanged.connect(self.send_command)
 
-        @pyqtSlot()
-        def autotune(param):
+        @asyncSlot()
+        async def autotune(param):
             match self.autotuner.state():
                 case PIDAutotuneState.STATE_OFF:
-                    settings = self.kirdy.device.get_settings_summary()
+                    settings = await self.kirdy.device.get_settings_summary()
                     self.autotuner.setParam(
                         param.parent().child('Target Temperature').value(),
                         param.parent().child('Test Current').value() / 1000,
@@ -678,7 +682,7 @@ class MainWindow(QtWidgets.QMainWindow):
                         param.parent().child('Lookback').value())
                     self.autotuner.setReady()
                     param.setOpts(title="Stop")
-                    self.kirdy.thermostat.set_constant_current_control_mode()
+                    self.kirdy.task_dispatcher(self.kirdy.thermostat.set_constant_current_control_mode())
                     self.kirdy_handler.report_update_sig.connect(self.autotune_tick)
                     self.loading_spinner.show()
                     self.loading_spinner.start()
@@ -686,7 +690,7 @@ class MainWindow(QtWidgets.QMainWindow):
                 case PIDAutotuneState.STATE_READY | PIDAutotuneState.STATE_RELAY_STEP_UP | PIDAutotuneState.STATE_RELAY_STEP_DOWN:
                     self.autotuner.setOff()
                     param.setOpts(title="Run")
-                    self.kirdy.thermostat.set_tec_i_out(0.0)
+                    self.kirdy.task_dispatcher(self.kirdy.thermostat.set_tec_i_out(0.0))
                     self.kirdy_handler.report_update_sig.disconnect(self.autotune_tick)
                     self.background_task_lbl.setText("Ready.")
                     self.loading_spinner.stop()
@@ -698,16 +702,16 @@ class MainWindow(QtWidgets.QMainWindow):
         match self.autotuner.state():
             case PIDAutotuneState.STATE_READY | PIDAutotuneState.STATE_RELAY_STEP_UP | PIDAutotuneState.STATE_RELAY_STEP_DOWN:
                 self.autotuner.run(report['thermostat']['temperature'], report['ts']/1000)
-                self.kirdy.thermostat.set_tec_i_out(self.autotuner.output())
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_tec_i_out(self.autotuner.output()))
             case PIDAutotuneState.STATE_SUCCEEDED:
                 kp, ki, kd = self.autotuner.get_tec_pid()
                 self.autotuner.setOff()
                 self.params[3].child('PID Config', 'PID Auto Tune', 'Run').setOpts(title="Run")
-                self.kirdy.thermostat.set_pid_kp(kp)
-                self.kirdy.thermostat.set_pid_ki(ki)
-                self.kirdy.thermostat.set_pid_kd(kd)
-                self.kirdy.thermostat.set_pid_control_mode()
-                self.kirdy.thermostat.set_temperature_setpoint(self.params[3].child('PID Config', 'PID Auto Tune', 'Target Temperature').value())
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_pid_kp(kp))
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_pid_ki(ki))
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_pid_kd(kd))
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_pid_control_mode())
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_temperature_setpoint(self.params[3].child('PID Config', 'PID Auto Tune', 'Target Temperature').value()))
                 self.kirdy_handler.report_update_sig.disconnect(self.autotune_tick)
                 self.background_task_lbl.setText("Ready.")
                 self.loading_spinner.stop()
@@ -719,7 +723,7 @@ class MainWindow(QtWidgets.QMainWindow):
             case PIDAutotuneState.STATE_FAILED:
                 self.autotuner.setOff()
                 self.params[3].child('PID Config', 'PID Auto Tune', 'Run').setOpts(title="Run")
-                self.kirdy.thermostat.set_tec_i_out(0.0)
+                self.kirdy.task_dispatcher(self.kirdy.thermostat.set_tec_i_out(0.0))
                 self.kirdy_handler.report_update_sig.disconnect(self.autotune_tick)
                 self.background_task_lbl.setText("Ready.")
                 self.loading_spinner.stop()
@@ -768,7 +772,6 @@ class MainWindow(QtWidgets.QMainWindow):
         if result:
             self.connect_btn.setText("Disconnect")
             self.connect_btn.clicked.connect(self.kirdy_handler.end_session)
-            # TODO: self.hw_rev_data = self.kirdy.hw_rev()
             self._status()
         else:
             if self.kirdy_handler.connecting():
@@ -782,10 +785,10 @@ class MainWindow(QtWidgets.QMainWindow):
             self.connect_btn.clicked.connect(self.kirdy_handler.end_session)
 
     def _status(self):
-        # TODO: Get rev no from Kirdy and then add revision into the text
         host = self.ip_addr
         port = self.port
-        self.status_lbl.setText(f"Connected to {host}:{port}")
+        hw_rev = self.kirdy_handler.get_hw_rev()
+        self.status_lbl.setText(f"Connected to Kirdy v{hw_rev['major']}.{hw_rev['minor']} @ {host}:{port}")
 
     def clear_graphs(self):
         self.graphs.clear_data_pts()
@@ -899,7 +902,7 @@ class MainWindow(QtWidgets.QMainWindow):
         port = net_settings["port"]
         prefix_len = net_settings["prefix_len"]
         gateway = net_settings["gateway_addr"]
-        self.kirdy.device.set_ip_settings(addr, port, prefix_len, gateway)
+        self.kirdy.task_dispatcher(self.kirdy.device.set_ip_settings(addr, port, prefix_len, gateway))
         self.status_lbl.setText("IP Settings is Updated")
 
     @pyqtSlot()
@@ -931,7 +934,7 @@ class MainWindow(QtWidgets.QMainWindow):
                     target, action = inner_param.opts['target_action_pair'][inner_param.opts['limits'].index(data)]
                     cmd = getattr(getattr(self.kirdy, target), action)
                     param.child(*param.childPath(inner_param)).setOpts(lock=True)
-                    cmd()
+                    self.kirdy.task_dispatcher(cmd())
                     param.child(*param.childPath(inner_param)).setOpts(lock=False)
                     continue
                 """ cmd translation from non-mutex type parameter"""
@@ -942,25 +945,27 @@ class MainWindow(QtWidgets.QMainWindow):
                             data = siEval(str(data)+inner_param.opts["unit"], regex=FLOAT_REGEX, suffix=suffix)
                         cmd = getattr(getattr(self.kirdy, inner_param.opts["target"]), inner_param.opts["action"])
                         param.child(*param.childPath(inner_param)).setOpts(lock=True)
-                        cmd(data)
+                        self.kirdy.task_dispatcher(cmd(data))
                         param.child(*param.childPath(inner_param)).setOpts(lock=False)
                         continue
 
-def coro_main():
+async def coro_main():
     args = get_argparser().parse_args()
     if args.logLevel:
         logging.basicConfig(level=getattr(logging, args.logLevel))
 
-    app = QtWidgets.QApplication(sys.argv)
+    app_quit_event = asyncio.Event()
+
+    app = QtWidgets.QApplication.instance()
+    app.aboutToQuit.connect(app_quit_event.set)
 
     main_window = MainWindow(args)
     main_window.show()
 
-    app.aboutToQuit.connect(main_window.kirdy_handler.end_session)
-    app.exec()
+    await app_quit_event.wait()
 
 def main():
-    coro_main()
+    qasync.run(coro_main())
 
 if __name__ == '__main__':
     main()

pykirdy/pid_autotune.py

@@ -8,6 +8,7 @@ import time
 import signal
 from driver.kirdy import Kirdy, FilterConfig
 import asyncio
+from sipyco.asyncio_tools import SignalHandler
 
 # Based on hirshmann pid-autotune libiary
 # See https://github.com/hirschmann/pid-autotune
@@ -76,6 +77,10 @@ class PIDAutotune:
     def setOff(self):
         self._state = PIDAutotuneState.STATE_OFF
 
+    def setFailed(self):
+        self._state = PIDAutotuneState.STATE_FAILED
+        self._peak_count = 30
+
     def state(self):
         """Get the current state."""
         return self._state
@@ -246,7 +251,7 @@ class PIDAutotune:
         return False
 
 
-def main():
+async def main():
     """
         PID AutoTune Tools for Kirdy
             The obtained temperature works best at the target temperature specified.
@@ -271,46 +276,46 @@ def main():
     noiseband = 2.0
 
     kirdy = Kirdy()
-    kirdy.start_session(host='192.168.1.128', port=1337)
+    kirdy.start_session(host='192.168.1.126', port=1337)
+
+    await kirdy.wait_until_connected()
 
     while not(kirdy.connected()):   
         pass
 
-    kirdy.laser.set_power_on(False)
-    kirdy.laser.set_i(0)
+    await kirdy.laser.set_power_on(False)
+    await kirdy.laser.set_i(0)
 
-    kirdy.thermostat.set_power_on(False)
-    kirdy.thermostat.set_constant_current_control_mode()
-    kirdy.thermostat.set_tec_i_out(0)
-    kirdy.thermostat.clear_alarm()
+    await kirdy.thermostat.set_power_on(False)
+    await kirdy.thermostat.set_constant_current_control_mode()
+    await kirdy.thermostat.set_tec_i_out(0)
+    await kirdy.thermostat.clear_alarm()
     
-    class SignalHandler:
-        KEEP_PROCESSING = True
-        def __init__(self):
-            signal.signal(signal.SIGINT, self.exit_gracefully)
-            signal.signal(signal.SIGTERM, self.exit_gracefully)
 
-        def exit_gracefully(self, signum, frame):
-            self.KEEP_PROCESSING = False
     signal_handler = SignalHandler()
-
-    kirdy.device.set_active_report_mode(False)
+    signal_handler.setup()
+    async def sig_handling():
+        await signal_handler.wait_terminate()
+        tuner.setFailed()
+    asyncio.create_task(sig_handling())
+    
+    await kirdy.device.set_active_report_mode(False)
 
     # Configure the Thermistor Parameters
-    kirdy.thermostat.set_sh_beta(3950)
-    kirdy.thermostat.set_sh_r0(10.0 * 1000)
-    kirdy.thermostat.set_sh_t0(25)
+    await kirdy.thermostat.set_sh_beta(3950)
+    await kirdy.thermostat.set_sh_r0(10.0 * 1000)
+    await kirdy.thermostat.set_sh_t0(25)
 
     # Set a large enough temperature range so that it won't trigger overtemperature protection
-    kirdy.thermostat.set_temp_mon_upper_limit(target_temperature + 20)
-    kirdy.thermostat.set_temp_mon_lower_limit(target_temperature - 20)
+    await kirdy.thermostat.set_temp_mon_upper_limit(target_temperature + 20)
+    await kirdy.thermostat.set_temp_mon_lower_limit(target_temperature - 20)
 
-    kirdy.thermostat.set_tec_max_cooling_i(output_step)
-    kirdy.thermostat.set_tec_max_heating_i(output_step)
+    await kirdy.thermostat.set_tec_max_cooling_i(output_step)
+    await kirdy.thermostat.set_tec_max_heating_i(output_step)
 
     # The Polling Rate of Temperature Adc is equal to the PID Update Interval
-    kirdy.thermostat.config_temp_adc_filter(FilterConfig.Sinc5Sinc1With50hz60HzRejection.f16sps)
-    settings = kirdy.device.get_settings_summary()
+    await kirdy.thermostat.config_temp_adc_filter(FilterConfig.Sinc5Sinc1With50hz60HzRejection.f16sps)
+    settings = await kirdy.device.get_settings_summary()
     sampling_rate = settings["thermostat"]["temp_adc_settings"]["rate"]
 
     print("Settings: {0}".format(settings))
@@ -318,10 +323,10 @@ def main():
     tuner = PIDAutotune(target_temperature, output_step,
                         lookback, noiseband, 1/sampling_rate)
 
-    kirdy.thermostat.set_power_on(True)
+    await kirdy.thermostat.set_power_on(True)
 
-    while True and signal_handler.KEEP_PROCESSING:
-        status_report = kirdy.device.get_status_report()
+    while True:
+        status_report = await kirdy.device.get_status_report()
         
         temperature = status_report["thermostat"]["temperature"]
         ts = status_report['ts']
@@ -332,19 +337,20 @@ def main():
             break
 
         tuner_out = tuner.output()
-        kirdy.thermostat.set_tec_i_out(float(tuner_out))
+        await kirdy.thermostat.set_tec_i_out(float(tuner_out))
     
-    kirdy.thermostat.set_tec_i_out(0)
-    kirdy.thermostat.set_power_on(False)
+    await kirdy.thermostat.set_tec_i_out(0)
+    await kirdy.thermostat.set_power_on(False)
 
-    pid_params = tuner.get_pid_parameters(tuning_rule="tyreus-luyben")
-    kirdy.thermostat.set_pid_kp(pid_params.Kp)
-    kirdy.thermostat.set_pid_ki(pid_params.Ki)
-    kirdy.thermostat.set_pid_kd(pid_params.Kd)
-    kirdy.thermostat.set_pid_output_max(1.0)
-    kirdy.thermostat.set_pid_output_min(1.0)
+    if tuner.state() == PIDAutotuneState.STATE_SUCCEEDED:
+        pid_params = tuner.get_pid_parameters(tuning_rule="tyreus-luyben")
+        await kirdy.thermostat.set_pid_kp(pid_params.Kp)
+        await kirdy.thermostat.set_pid_ki(pid_params.Ki)
+        await kirdy.thermostat.set_pid_kd(pid_params.Kd)
+        await kirdy.thermostat.set_pid_output_max(1.0)
+        await kirdy.thermostat.set_pid_output_min(1.0)
 
-    kirdy.end_session(block=True)
+    await kirdy.end_session()
 
 if __name__ == "__main__":
-    main()
+    asyncio.run(main())

src/device/boot.rs

@@ -9,7 +9,8 @@ use uom::si::{electric_current::{ampere, milliampere},
               f32::ElectricCurrent};
 
 use super::{gpio, sys_timer, usb};
-use crate::{device::flash_store::{self, FlashStore},
+use crate::{device::{flash_store::{self, FlashStore},
+                     hw_rev::HWRev},
             laser_diode::{laser_diode::LdDrive, ld_ctrl::*},
             net::net::{IpSettings, ServerHandle},
             thermostat::{max1968::MAX1968, thermostat::Thermostat},
@@ -23,7 +24,7 @@ const WATCHDOG_PERIOD: u32 = 30000;
 pub fn bootup(
     mut core_perif: CorePeripherals,
     perif: Peripherals,
-) -> (IndependentWatchdog, FlashStore, LdDrive, Thermostat) {
+) -> (IndependentWatchdog, FlashStore, HWRev, LdDrive, Thermostat) {
     core_perif.SCB.enable_icache();
     core_perif.SCB.enable_dcache(&mut core_perif.CPUID);
 
@@ -119,5 +120,5 @@ pub fn bootup(
 
     info!("Kirdy setup complete");
 
-    (wd, flash_store, laser, thermostat)
+    (wd, flash_store, hw_rev, laser, thermostat)
 }

src/device/hw_rev.rs

@@ -1,4 +1,6 @@
 use crc::{Crc, CRC_24_BLE};
+use miniconf::Tree;
+use serde::{Deserialize, Serialize};
 use stm32f4xx_hal::{gpio::{Input, PE10, PE11, PE8, PE9},
                     signature};
 
@@ -11,6 +13,7 @@ pub struct HwRevPins {
     pub h3: PE11<Input>,
 }
 
+#[derive(Deserialize, Serialize, Copy, Clone, Debug, Tree)]
 pub struct HWRev {
     pub major: u8,
     pub minor: u8,

src/main.rs

@@ -1,7 +1,7 @@
 #![cfg_attr(not(test), no_main)]
 #![cfg_attr(not(test), no_std)]
 
-use core::marker::PhantomData;
+use core::{marker::PhantomData, u32};
 
 use cortex_m_rt::entry;
 use log::{debug, info};
@@ -52,6 +52,7 @@ pub enum State {
     SaveLdThermostatSettings,
     SaveDeviceSettings,
     PrepareForHardReset,
+    PrepareForDfu,
     HardReset,
 }
 
@@ -64,7 +65,7 @@ fn main() -> ! {
     let core_perif = CorePeripherals::take().unwrap();
     let perif = Peripherals::take().unwrap();
 
-    let (mut wd, mut flash_store, mut laser, mut thermostat) = bootup(core_perif, perif);
+    let (mut wd, mut flash_store, mut hw_rev, mut laser, mut thermostat) = bootup(core_perif, perif);
 
     let mut device_settings = DeviceSettings {
         ip_settings: IpSettings::default(),
@@ -82,6 +83,8 @@ fn main() -> ! {
 
     let eth_data_buffer = unsafe { addr_of_mut!(ETH_DATA_BUFFER).as_mut().unwrap() };
 
+    let mut sock_ts: [u32; net::net::NUM_OF_SOCKETS] = [0; net::net::NUM_OF_SOCKETS];
+
     loop {
         wd.feed();
 
@@ -183,6 +186,10 @@ fn main() -> ! {
                     thermostat.start_tec_readings_conversion();
                 }
 
+                let mut num_of_connected_sock: u8 = 0;
+                let mut oldest_connected_sock_ts: u32 = u32::MAX;
+                let mut oldest_connected_sock_id: usize = 0;
+
                 net::net::for_each(|mut socket, id| {
                     if net::net::eth_is_socket_active(socket) && net::net::eth_is_socket_connected(socket) {
                         if net::net::eth_can_sock_recv(socket) && net::net::eth_can_sock_send(socket) {
@@ -195,6 +202,7 @@ fn main() -> ! {
                                     eth_data_buffer,
                                     bytes,
                                     &mut socket,
+                                    &mut hw_rev,
                                     &mut laser,
                                     &mut thermostat,
                                     &mut state,
@@ -203,8 +211,35 @@ fn main() -> ! {
                                 );
                             }
                         }
+
+                        num_of_connected_sock += 1;
+
+                        if sock_ts[id] == 0 {
+                            sock_ts[id] = sys_timer::now();
+                        }
+                        if oldest_connected_sock_ts > sock_ts[id] {
+                            oldest_connected_sock_ts = sock_ts[id];
+                            oldest_connected_sock_id = id;
+                        }
+                    } else {
+                        sock_ts[id] = 0;
                     }
-                })
+                });
+
+                if num_of_connected_sock == net::net::NUM_OF_SOCKETS as u8 {
+                    let mut sock_handle = net::net::eth_get_sock_handle(oldest_connected_sock_id);
+                    net::cmd_handler::send_response(
+                        eth_data_buffer,
+                        net::cmd_handler::ResponseEnum::ConnectionClose,
+                        None,
+                        &mut sock_handle,
+                    );
+                    net::net::eth_poll_iface();
+                    debug!("Waiting for ConnectionClose msg to be sent");
+                    while !net::net::eth_is_data_sent() { }
+                    net::net::eth_close_socket_by_id(oldest_connected_sock_id);
+                    debug!("Closing socket id: {:?}", oldest_connected_sock_id);
+                }
             }
             State::SaveLdThermostatSettings => {
                 // State Transition
@@ -261,9 +296,30 @@ fn main() -> ! {
                             None,
                             &mut socket,
                         );
+                        net::net::eth_poll_iface();
                     }
                 });
             }
+            State::PrepareForDfu => {
+                // State Transition
+                state = State::HardReset;
+
+                wd.feed();
+                laser.power_down();
+                thermostat.power_down();
+                net::net::for_each(|mut socket, _| {
+                    if net::net::eth_is_socket_active(socket) {
+                        net::cmd_handler::send_response(
+                            eth_data_buffer,
+                            net::cmd_handler::ResponseEnum::Dfu,
+                            None,
+                            &mut socket,
+                        );
+                        net::net::eth_poll_iface();
+                    }
+                });
+            }
+
             State::HardReset => {
                 wd.feed();
                 laser.power_down();

src/net/cmd_handler.rs

@@ -10,7 +10,7 @@ use uom::si::{electric_current::{ampere, ElectricCurrent},
               electrical_resistance::{ohm, ElectricalResistance},
               power::{watt, Power}};
 
-use crate::{device::{dfu, sys_timer},
+use crate::{device::{dfu, hw_rev::HWRev, sys_timer},
             laser_diode::{laser_diode::{LdDrive, LdSettingsSummary, StatusReport as LdStatusReport},
                           pd_mon_params::{self, ResponsitivityUnit}},
             net::net,
@@ -26,10 +26,13 @@ pub enum ResponseEnum {
     Reserved,
     Settings,
     Report,
+    HwRev,
     Acknowledge,
     InvalidDatatype,
     InvalidCmd,
     HardReset,
+    Dfu,
+    ConnectionClose,
 }
 
 pub type MsgType = Option<&'static str>;
@@ -59,6 +62,7 @@ pub struct ResponseObj<'a> {
 enum DeviceCmd {
     #[default]
     Reserved,
+    GetHwRev,
     SetIPSettings,
     SetActiveReportMode,
     SetPdFinGain,
@@ -173,6 +177,17 @@ pub struct SettingsSummaryObj {
     json: SettingsSummary,
 }
 
+#[derive(Deserialize, Serialize, Copy, Clone, Debug, Tree)]
+pub struct HwRevType {
+    msg_type: ResponseEnum,
+    hw_rev: HWRev,
+}
+
+#[derive(Deserialize, Serialize, Copy, Clone, Debug, Tree)]
+pub struct HwRevObj {
+    json: HwRevType,
+}
+
 pub fn send_response(buffer: &mut [u8], msg_type: ResponseEnum, msg: MsgType, socket: &mut SocketHandle) {
     let response = ResponseObj {
         json: Response {
@@ -227,6 +242,18 @@ pub fn send_status_report(
     net::eth_send(buffer, num_bytes, *socket);
 }
 
+pub fn send_hw_rev(buffer: &mut [u8], hw_rev_o: &mut HWRev, socket: &mut SocketHandle) {
+    let hw_rev = HwRevObj {
+        json: HwRevType {
+            msg_type: ResponseEnum::HwRev,
+            hw_rev: *hw_rev_o,
+        },
+    };
+    let mut num_bytes = hw_rev.get_json("/json", buffer).unwrap();
+    buffer[num_bytes] = b'\n';
+    num_bytes += 1;
+    net::eth_send(buffer, num_bytes, *socket);
+}
 // Use a minimal struct for high speed cmd ctrl to reduce processing overhead
 #[derive(Deserialize, Serialize, Copy, Clone, Debug, Default, Tree)]
 pub struct TecSetICmdJson {
@@ -245,6 +272,7 @@ pub fn execute_cmd(
     buffer: &mut [u8],
     buffer_size: usize,
     socket: &mut SocketHandle,
+    hw_rev: &mut HWRev,
     laser: &mut LdDrive,
     thermostat: &mut Thermostat,
     state: &mut State,
@@ -296,7 +324,8 @@ pub fn execute_cmd(
                     unsafe {
                         dfu::set_dfu_trigger();
                     }
-                    *state = State::HardReset;
+                    net::eth_poll_iface();
+                    *state = State::PrepareForDfu;
                 }
                 Some(DeviceCmd::SetActiveReportMode) => match cmd.json.data_bool {
                     Some(val) => {
@@ -348,6 +377,9 @@ pub fn execute_cmd(
                         );
                     }
                 },
+                Some(DeviceCmd::GetHwRev) => {
+                    send_hw_rev(buffer, hw_rev, socket);
+                }
                 Some(DeviceCmd::GetStatusReport) => {
                     send_status_report(buffer, laser, thermostat, socket);
                 }
@@ -364,6 +396,7 @@ pub fn execute_cmd(
                 }
                 Some(DeviceCmd::HardReset) => {
                     send_response(buffer, ResponseEnum::Acknowledge, None, socket);
+                    net::eth_poll_iface();
                     *state = State::PrepareForHardReset;
                 }
                 None => { /* Do Nothing */ }

src/net/net.rs

@@ -47,6 +47,7 @@ pub struct ServerHandle {
     dma: EthernetDMA<'static, 'static>,
     phy: EthernetPhy<EthernetMACWithMii<Pin<'A', 2, Alternate<11>>, Pin<'C', 1, Alternate<11>>>>,
     link_was_up: bool,
+    data_sent: bool,
 }
 pub type EthernetPins = EthPins<PA1<Input>, PA7<Input>, PB11<Input>, PB12<Input>, PB13<Input>, PC4<Input>, PC5<Input>>;
 pub struct EthernetMgmtPins {
@@ -55,7 +56,7 @@ pub struct EthernetMgmtPins {
 }
 pub type EthInterface = Interface;
 
-pub const NUM_OF_SOCKETS: usize = 4;
+pub const NUM_OF_SOCKETS: usize = 4 + 1;
 const TCP_BUFFER_SIZE: usize = 4096;
 static mut RX_RING: Option<[RxRingEntry; 8]> = None;
 static mut TX_RING: Option<[TxRingEntry; 8]> = None;
@@ -138,7 +139,7 @@ impl ServerHandle {
         let tcp_handles = {
             // Do not use NUM_OF_SOCKETS to define array size to
             //  remind developers to create/remove tcp_handles accordingly after changing NUM_OF_SOCKETS
-            let mut tcp_handles: [MaybeUninit<SocketHandle>; 4] = unsafe { MaybeUninit::uninit().assume_init() };
+            let mut tcp_handles: [MaybeUninit<SocketHandle>; 5] = unsafe { MaybeUninit::uninit().assume_init() };
 
             macro_rules! create_tcp_handle {
                 ($rx_storage:ident, $tx_storage:ident, $handle:expr) => {
@@ -155,8 +156,9 @@ impl ServerHandle {
             create_tcp_handle!(RX_STORAGE1, TX_STORAGE1, tcp_handles[1]);
             create_tcp_handle!(RX_STORAGE2, TX_STORAGE2, tcp_handles[2]);
             create_tcp_handle!(RX_STORAGE3, TX_STORAGE3, tcp_handles[3]);
+            create_tcp_handle!(RX_STORAGE4, TX_STORAGE4, tcp_handles[4]);
 
-            unsafe { mem::transmute::<_, [SocketHandle; 4]>(tcp_handles) }
+            unsafe { mem::transmute::<_, [SocketHandle; 5]>(tcp_handles) }
         };
 
         for i in 0..NUM_OF_SOCKETS {
@@ -189,6 +191,7 @@ impl ServerHandle {
                 dma: dma,
                 phy: phy,
                 link_was_up: false,
+                data_sent: true,
             };
 
             unsafe {
@@ -246,14 +249,17 @@ impl ServerHandle {
     pub fn send(&mut self, buffer: &mut [u8], num_bytes: usize, socket_handles: SocketHandle) {
         let socket = self.socket_set.get_mut::<Socket>(socket_handles);
         if num_bytes > 0 {
-            match socket.send_slice(&buffer[..num_bytes]) {
-                Ok(_) => {
-                    info!("Enqueued {} bytes.", num_bytes);
-                }
-                Err(err) => {
-                    info!("Bytes cannot be sent. Error: {:?}", err)
-                }
-            };
+            cortex_m::interrupt::free(|_| {
+                match socket.send_slice(&buffer[..num_bytes]) {
+                    Ok(_) => {
+                        self.data_sent = false;
+                        info!("Enqueued {} bytes.", num_bytes);
+                    }
+                    Err(err) => {
+                        info!("Bytes cannot be sent. Error: {:?}", err)
+                    }
+                };
+            });
         }
     }
 
@@ -433,7 +439,7 @@ pub fn eth_update_iface_poll_timer() {
     }
 }
 
-fn eth_poll_iface() {
+pub fn eth_poll_iface() {
     unsafe {
         if let Some(ref mut server_handle) = SERVER_HANDLE {
             server_handle.poll_iface();
@@ -499,6 +505,46 @@ pub fn eth_close_socket(socket_handles: SocketHandle) {
     }
 }
 
+pub fn eth_get_sock_handle(id: usize) -> SocketHandle {
+    unsafe {
+        if let Some(ref mut server_handle) = SERVER_HANDLE {
+            server_handle.socket_handles[id]
+        } else {
+            panic!("eth_get_sock_handle is called before init");
+        }
+    }
+}
+
+pub fn eth_close_socket_by_id(id: usize) {
+    unsafe {
+        if let Some(ref mut server_handle) = SERVER_HANDLE {
+            server_handle.close_socket(server_handle.socket_handles[id])
+        } else {
+            panic!("eth_close_socket_by_id is called before init");
+        }
+    }
+}
+
+pub fn eth_is_data_sent() -> bool {
+    unsafe {
+        if let Some(ref mut server_handle) = SERVER_HANDLE {
+            server_handle.data_sent
+        } else {
+            panic!("eth_is_data_sent is called before init");
+        }
+    }
+}
+
+fn eth_set_data_sent(val: bool) {
+    unsafe {
+        if let Some(ref mut server_handle) = SERVER_HANDLE {
+            server_handle.data_sent = val;
+        } else {
+            panic!("eth_is_data_sent is called before init");
+        }
+    }
+}
+
 pub fn for_each<F: FnMut(SocketHandle, usize)>(mut callback: F) {
     unsafe {
         if let Some(ref mut server_handle) = SERVER_HANDLE {
@@ -519,6 +565,9 @@ fn ETH() {
     if interrupt_reason.rx {
         eth_poll_iface();
     }
+    if interrupt_reason.tx {
+        eth_set_data_sent(true);
+    }
     debug!("Ethernet Interrupt{:?}", interrupt_reason);
 }