Commit Graph

6177 Commits

Author SHA1 Message Date
Robert Jördens 5de2d06568 ad53xx/zotino: do not clear power down on overtemp 2018-06-01 13:17:13 +00:00
Robert Jördens 2c344686d9 ad53xx/zotino: enable overtemp shutdown and readback control 2018-06-01 13:06:52 +00:00
Robert Jördens b56d37eb63 manual: fix table 2018-06-01 14:22:15 +02:00
Robert Jördens 87d3ac9d25 suservo: swap transfer function parametrization
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.

close #1033
2018-06-01 09:38:18 +00:00
Sebastien Bourdeauducq e408241233 sawg: work around compiler not accepting delay_mu(int32) 2018-06-01 15:42:37 +08:00
Sebastien Bourdeauducq f5d55c6902 sawg: add 1 coarse RTIO cycle between spline resets
This keeps all events in the same SED lane and limits the number of SED lanes required.

Closes #1038
2018-06-01 15:15:24 +08:00
Robert Jördens 22506e849f suservo: clarify timings
close #1027
2018-06-01 06:35:38 +00:00
Robert Jördens a42f774440 suservo: document offset range limits
close #1034
2018-05-31 16:55:44 +00:00
Robert Jördens 36dcea3edf suservo: refactor y_mu_to_full_scale as portable
close #1032
2018-05-31 16:44:14 +00:00
Robert Jördens e136709cac suservo: document gain state
close #1030
2018-05-31 16:36:53 +00:00
Robert Jördens 5dbdc5650c suservo: document set_config and get_status more
close #1028
2018-05-31 16:32:05 +00:00
Robert Jördens e1b0fcc24e suservo: add documentation on settings and setup
close #1015
2018-05-31 16:21:09 +00:00
Robert Jördens 9b5a46dffd suservo: fix restart counter assertion
c.f. #788
2018-05-31 15:56:11 +00:00
Robert Jördens 58f71e34fc doc: add hut2 and lasersdk controller default ports 2018-05-31 14:23:57 +00:00
Sebastien Bourdeauducq 38b5128222 conda: bump jesd204 2018-05-30 23:39:22 +08:00
Paweł 44c7a028cb Added second argument to DIO.add_STD in master and satellite variant of kasli (now builds properly) 2018-05-30 22:49:40 +08:00
Sebastien Bourdeauducq 8fd57e6ccb kasli_tester: add Sampler and Zotino support 2018-05-29 22:36:42 +08:00
Sebastien Bourdeauducq d1df18ae6a monkey_patches: work around Python issue 33678. Closes #1016 2018-05-29 17:51:41 +08:00
whitequark 2e09307d8d firmware: use writeln instead of write in UART logger. 2018-05-29 03:16:52 +00:00
Sebastien Bourdeauducq 560889372f firmware: grabber support 2018-05-29 10:26:36 +08:00
Chris Ballance b860302a9a firmware: fix typo in UART logger 2018-05-28 17:25:23 +00:00
whitequark 2b7d98eb04 firmware: enable all log levels when creating UART logger.
The default is all off.
2018-05-28 16:49:25 +00:00
Sebastien Bourdeauducq ad099edf63 kasli: integrate grabber 2018-05-28 22:43:40 +08:00
Sebastien Bourdeauducq 563e434e15 eem: finalize grabber support 2018-05-28 22:43:06 +08:00
Sebastien Bourdeauducq 2612fd1e72 rtio: add grabber deserializer and WIP PHY encapsulation 2018-05-28 22:42:27 +08:00
Florent Kermarrec e21f14c0b3 serwb/phy: typo (KUSSerdes --> KUSerdes) 2018-05-28 10:41:11 +02:00
Sebastien Bourdeauducq c2890c6cf0 kasli_tester: initialize DDS channels 2018-05-28 14:24:39 +08:00
Robert Jördens b20a8c86b0 kasli: don't bother with grabber ttls for now
not used on target cameras
2018-05-28 07:31:00 +02:00
Sebastien Bourdeauducq 80c69da17e eem: add Grabber IOs and CC 2018-05-28 11:16:23 +08:00
Sebastien Bourdeauducq 4d3f763865 move kasli_opticlock to kasli_basic 2018-05-28 11:02:44 +08:00
Sebastien Bourdeauducq cc0ddf9d72 artiq_flash: do not check variants anymore
Not very useful and adds to the maintainance when building new Kasli systems.
2018-05-28 10:59:01 +08:00
Sebastien Bourdeauducq bb248970df style 2018-05-28 10:40:05 +08:00
Robert Jördens 56cfe77c91 environment: spelling 2018-05-27 20:36:11 +02:00
Robert Jördens b09d07905c kasli: add LUH/PTB/HUB variants
and refactor/simplify variant selection
2018-05-27 18:33:27 +00:00
whitequark db4d1878d3 compiler: remove debug print. 2018-05-25 09:37:18 +00:00
whitequark da851d8b7b conda: fix installation path in artiq-board. 2018-05-25 08:41:55 +00:00
whitequark bc86ade160 conda: add ignore_prefix_files in the outputs section too. 2018-05-25 08:41:19 +00:00
whitequark c3c9ffcd4f conda: override --install-lib, not --prefix. 2018-05-25 06:45:46 +00:00
whitequark 223b984385 Fix non-exception-safe finally: handlers.
Fixes #1013.
2018-05-25 04:23:32 +00:00
whitequark 44910efd0a conda: remove lib/python3.5 from artiq package paths as well.
Following c9287cfc.
2018-05-25 02:23:18 +00:00
whitequark fbf2c9a2fb compiler: hoist loads of kernel invariants to function entry block.
Addresses intraprocedural cases of #1007.
2018-05-25 02:18:13 +00:00
whitequark 12d1b9819c compiler: handle direct calls to class methods.
Fixes #1005.
2018-05-25 02:02:18 +00:00
whitequark c9287cfc69 conda: put `noarch: python` on correct artiq-board package.
Fixes #989.
2018-05-24 21:09:50 +00:00
Florent Kermarrec bcb9c3d09d firmware/serwb: move prbs_test outside of wait_init, add wishbone_test 2018-05-24 16:53:47 +02:00
Florent Kermarrec bca2969957 sayma_rtm: add RTMScratch module to test remote Wishbone accesses 2018-05-24 16:53:10 +02:00
Florent Kermarrec 7642254d83 Merge branch 'master' of http://github.com/m-labs/artiq 2018-05-24 16:51:23 +02:00
Florent Kermarrec 353767bfdb firmware/hmc830: add VCO subsystem register 6 programming (suggested by hartytp, tested on hardware without regression) 2018-05-24 16:49:49 +02:00
Sebastien Bourdeauducq 19efd8b13e kasli: refactor EEM code 2018-05-24 18:41:54 +08:00
Florent Kermarrec ad89c42acc firmware/serwb: automatically adjust prbs test delay to prbs test cycles, increase prbs test cycles 2018-05-24 10:20:55 +02:00
Florent Kermarrec 19e5280824 firmware/ad9154: cleanup DAC init
- Split dac_setup in dac_reset, dat_detect & dac_setup.
- Only do one reset/detection.
- Configure before doing SYSREF scan (otherwise scan don't work at the first scan after power up).
- Do the spi_setup in each function.
2018-05-24 09:34:00 +02:00