srenblad/zynq-rs
1
0
Fork 0
forked from M-Labs/zynq-rs
Code Pull Requests Activity
Bare-metal Rust on Zynq-7000
32 Commits 9 Branches 0 Tags 2.1 MiB
Rust 96.3%
Assembly 2.6%
Nix 1%
d10ffe9eb9
Go to file
Astro d10ffe9eb9 eth: setup mio_pins, configure net_cfg
2019-05-25 03:06:39 +02:00
.cargo PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
src eth: setup mio_pins, configure net_cfg 2019-05-25 03:06:39 +02:00
build.rs PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
Cargo.lock PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
Cargo.toml run with the cora z7-10 2019-05-25 02:38:48 +02:00
cora-z7-10.cfg run with the cora z7-10 2019-05-25 02:38:48 +02:00
default.nix PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
link.x PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
qemu.gdb PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
README.md run with the cora z7-10 2019-05-25 02:38:48 +02:00
runner.sh PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00
shell.nix PoC: boot, uart output in qemu 2019-05-05 14:56:23 +02:00

README.md

Build

nix-shell --command "cargo build --release"

Debug

Using the Xilinx toolchain

Tested with the ZC706 board.

Run the Xilinx Microprocessor Debugger:

/opt/Xilinx/14.7/ISE_DS/EDK/bin/lin64/xmd

Connect to target (given it is connected and you have permissions):

connect arm hw

Leave xmd running.

Start the Xilinx version of the GNU debugger with your latest build:

/opt/Xilinx/14.7/ISE_DS/EDK/gnu/arm/lin/bin/arm-xilinx-linux-gnueabi-gdb zc706

Connect the debugger to xmd over TCP on localhost:

target remote :1234

Proceed using gdb with load, c

Using OpenOCD

Resources for the ZC706

https://devel.rtems.org/wiki/Debugging/OpenOCD/Xilinx_Zynq https://github.com/nathanrossi/meta-random/tree/master/openocd-zynq

Running on the Cora Z7-10

nix-shell --command "cargo build --release --no-default-features --features=target_cora_z7_10"
openocd -f cora-z7-10.cfg