forked from M-Labs/artiq
drtio: initialize si5324 in firmware
This commit is contained in:
parent
3488b4a857
commit
f512ea42dc
|
@ -8,6 +8,28 @@ extern crate log;
|
|||
extern crate logger_artiq;
|
||||
extern crate board;
|
||||
|
||||
#[cfg(rtio_frequency = "62.5")]
|
||||
const SI5324_SETTINGS: board::si5324::FrequencySettings
|
||||
= board::si5324::FrequencySettings {
|
||||
n1_hs : 10,
|
||||
nc1_ls : 8,
|
||||
n2_hs : 10,
|
||||
n2_ls : 20112,
|
||||
n31 : 2514,
|
||||
n32 : 4597
|
||||
};
|
||||
|
||||
#[cfg(rtio_frequency = "150.0")]
|
||||
const SI5324_SETTINGS: board::si5324::FrequencySettings
|
||||
= board::si5324::FrequencySettings {
|
||||
n1_hs : 9,
|
||||
nc1_ls : 4,
|
||||
n2_hs : 10,
|
||||
n2_ls : 33732,
|
||||
n31 : 9370,
|
||||
n32 : 7139
|
||||
};
|
||||
|
||||
fn startup() {
|
||||
board::clock::init();
|
||||
info!("ARTIQ satellite manager starting...");
|
||||
|
@ -16,6 +38,8 @@ fn startup() {
|
|||
|
||||
#[cfg(has_ad9516)]
|
||||
board::ad9516::init().expect("cannot initialize ad9516");
|
||||
board::i2c::init();
|
||||
board::si5324::setup_hitless_clock_switching(&SI5324_SETTINGS).expect("cannot initialize si5324");
|
||||
|
||||
loop {}
|
||||
}
|
||||
|
|
|
@ -3,9 +3,8 @@ import os
|
|||
|
||||
from migen import *
|
||||
from migen.build.generic_platform import *
|
||||
from misoc.cores.i2c import *
|
||||
from misoc.cores.sequencer import *
|
||||
from misoc.cores import spi as spi_csr
|
||||
from misoc.cores import gpio
|
||||
from misoc.integration.builder import *
|
||||
from misoc.integration.soc_core import mem_decoder
|
||||
from misoc.targets.kc705 import BaseSoC, soc_kc705_args, soc_kc705_argdict
|
||||
|
@ -19,119 +18,6 @@ from artiq import __version__ as artiq_version
|
|||
from artiq import __artiq_dir__ as artiq_dir
|
||||
|
||||
|
||||
# NOTE: the logical parameters DO NOT MAP to physical values written
|
||||
# into registers. They have to be mapped; see the datasheet.
|
||||
# DSPLLsim reports the logical parameters in the design summary, not
|
||||
# the physical register values.
|
||||
|
||||
pll_dividers_62_5 = {
|
||||
"N1_HS" : 6, # 10
|
||||
"NC1_LS" : 7, # 8
|
||||
"N2_HS" : 6, # 10
|
||||
"N2_LS" : 20111, # 20112
|
||||
"N31" : 2513, # 2514
|
||||
"N32" : 4596 # 4597
|
||||
}
|
||||
|
||||
pll_dividers_150 = {
|
||||
"N1_HS" : 5, # 9
|
||||
"NC1_LS" : 3, # 4
|
||||
"N2_HS" : 6, # 10
|
||||
"N2_LS" : 33731, # 33732
|
||||
"N31" : 9369, # 9370
|
||||
"N32" : 7138 # 7139
|
||||
}
|
||||
|
||||
|
||||
# TODO: move I2C programming to softcore CPU
|
||||
def get_i2c_program(d, sys_clk_freq):
|
||||
i2c_sequence = [
|
||||
# PCA9548: select channel 7
|
||||
[(0x74 << 1), 1 << 7],
|
||||
# Si5324: configure
|
||||
[(0x68 << 1), 0, 0b01010000], # FREE_RUN=1
|
||||
[(0x68 << 1), 1, 0b11100100], # CK_PRIOR2=1 CK_PRIOR1=0
|
||||
[(0x68 << 1), 2, 0b0010 | (4 << 4)], # BWSEL=4
|
||||
[(0x68 << 1), 3, 0b0101 | 0x10], # SQ_ICAL=1
|
||||
[(0x68 << 1), 4, 0b10010010], # AUTOSEL_REG=b10
|
||||
[(0x68 << 1), 6, 0x07], # SFOUT1_REG=b111
|
||||
[(0x68 << 1), 25, (d["N1_HS"] << 5 ) & 0xff],
|
||||
[(0x68 << 1), 31, (d["NC1_LS"] >> 16) & 0xff],
|
||||
[(0x68 << 1), 32, (d["NC1_LS"] >> 8 ) & 0xff],
|
||||
[(0x68 << 1), 33, (d["NC1_LS"]) & 0xff],
|
||||
[(0x68 << 1), 40, (d["N2_HS"] << 5 ) & 0xff |
|
||||
(d["N2_LS"] >> 16) & 0xff],
|
||||
[(0x68 << 1), 41, (d["N2_LS"] >> 8 ) & 0xff],
|
||||
[(0x68 << 1), 42, (d["N2_LS"]) & 0xff],
|
||||
[(0x68 << 1), 43, (d["N31"] >> 16) & 0xff],
|
||||
[(0x68 << 1), 44, (d["N31"] >> 8) & 0xff],
|
||||
[(0x68 << 1), 45, (d["N31"]) & 0xff],
|
||||
[(0x68 << 1), 46, (d["N32"] >> 16) & 0xff],
|
||||
[(0x68 << 1), 47, (d["N32"] >> 8) & 0xff],
|
||||
[(0x68 << 1), 48, (d["N32"]) & 0xff],
|
||||
[(0x68 << 1), 137, 0x01], # FASTLOCK=1
|
||||
[(0x68 << 1), 136, 0x40], # ICAL=1
|
||||
]
|
||||
|
||||
program = [
|
||||
InstWrite(I2C_CONFIG_ADDR, int(sys_clk_freq/1e3)),
|
||||
]
|
||||
for subseq in i2c_sequence:
|
||||
program += [
|
||||
InstWrite(I2C_XFER_ADDR, I2C_START),
|
||||
InstWait(I2C_XFER_ADDR, I2C_IDLE),
|
||||
]
|
||||
for octet in subseq:
|
||||
program += [
|
||||
InstWrite(I2C_XFER_ADDR, I2C_WRITE | octet),
|
||||
InstWait(I2C_XFER_ADDR, I2C_IDLE),
|
||||
]
|
||||
program += [
|
||||
InstWrite(I2C_XFER_ADDR, I2C_STOP),
|
||||
InstWait(I2C_XFER_ADDR, I2C_IDLE),
|
||||
]
|
||||
program += [
|
||||
InstEnd(),
|
||||
]
|
||||
return program
|
||||
|
||||
|
||||
class Si5324ResetClock(Module):
|
||||
def __init__(self, platform, sys_clk_freq):
|
||||
self.si5324_not_ready = Signal(reset=1)
|
||||
|
||||
# minimum reset pulse 1us
|
||||
reset_done = Signal()
|
||||
si5324_rst_n = platform.request("si5324").rst_n
|
||||
reset_val = int(sys_clk_freq*1.1e-6)
|
||||
reset_ctr = Signal(max=reset_val+1, reset=reset_val)
|
||||
self.sync += \
|
||||
If(reset_ctr != 0,
|
||||
reset_ctr.eq(reset_ctr - 1)
|
||||
).Else(
|
||||
si5324_rst_n.eq(1),
|
||||
reset_done.eq(1)
|
||||
)
|
||||
# 10ms after reset to microprocessor access ready
|
||||
ready_val = int(sys_clk_freq*11e-3)
|
||||
ready_ctr = Signal(max=ready_val+1, reset=ready_val)
|
||||
self.sync += \
|
||||
If(reset_done,
|
||||
If(ready_ctr != 0,
|
||||
ready_ctr.eq(ready_ctr - 1)
|
||||
).Else(
|
||||
self.si5324_not_ready.eq(0)
|
||||
)
|
||||
)
|
||||
|
||||
si5324_clkin = platform.request("si5324_clkin")
|
||||
self.specials += \
|
||||
Instance("OBUFDS",
|
||||
i_I=ClockSignal("rtio_rx"),
|
||||
o_O=si5324_clkin.p, o_OB=si5324_clkin.n
|
||||
)
|
||||
|
||||
|
||||
class Satellite(BaseSoC):
|
||||
mem_map = {
|
||||
"drtio_aux": 0x50000000,
|
||||
|
@ -158,22 +44,6 @@ class Satellite(BaseSoC):
|
|||
self.submodules += phy
|
||||
rtio_channels.append(rtio.Channel.from_phy(phy))
|
||||
|
||||
if cfg == "simple_gbe":
|
||||
pll_dividers = pll_dividers_62_5
|
||||
elif cfg == "sawg_3g":
|
||||
pll_dividers = pll_dividers_150
|
||||
else:
|
||||
raise ValueError
|
||||
i2c_master = I2CMaster(platform.request("i2c"))
|
||||
sequencer = ResetInserter()(
|
||||
Sequencer(get_i2c_program(pll_dividers, self.clk_freq)))
|
||||
si5324_reset_clock = Si5324ResetClock(platform, self.clk_freq)
|
||||
self.submodules += i2c_master, sequencer, si5324_reset_clock
|
||||
self.comb += [
|
||||
sequencer.bus.connect(i2c_master.bus),
|
||||
sequencer.reset.eq(si5324_reset_clock.si5324_not_ready)
|
||||
]
|
||||
|
||||
self.comb += platform.request("sfp_tx_disable_n").eq(1)
|
||||
tx_pads = platform.request("sfp_tx")
|
||||
rx_pads = platform.request("sfp_rx")
|
||||
|
@ -215,6 +85,19 @@ class Satellite(BaseSoC):
|
|||
self.drtio.aux_controller.bus)
|
||||
self.add_memory_region("drtio_aux", self.mem_map["drtio_aux"] | self.shadow_base, 0x800)
|
||||
|
||||
self.config["RTIO_FREQUENCY"] = str(self.transceiver.rtio_clk_freq/1e6)
|
||||
si5324_clkin = platform.request("si5324_clkin")
|
||||
self.specials += \
|
||||
Instance("OBUFDS",
|
||||
i_I=ClockSignal("rtio_rx"),
|
||||
o_O=si5324_clkin.p, o_OB=si5324_clkin.n
|
||||
)
|
||||
self.comb += platform.request("si5324").rst_n.eq(1)
|
||||
i2c = self.platform.request("i2c")
|
||||
self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
|
||||
self.csr_devices.append("i2c")
|
||||
self.config["I2C_BUS_COUNT"] = 1
|
||||
|
||||
rtio_clk_period = 1e9/self.transceiver.rtio_clk_freq
|
||||
platform.add_period_constraint(self.transceiver.txoutclk, rtio_clk_period)
|
||||
platform.add_period_constraint(self.transceiver.rxoutclk, rtio_clk_period)
|
||||
|
|
Loading…
Reference in New Issue