forked from M-Labs/artiq
1
0
Fork 0

doc/ndsp_reference: reorganize

This commit is contained in:
Sebastien Bourdeauducq 2015-08-18 22:34:22 +08:00
parent 178816243c
commit c97c6e2b9a
1 changed files with 35 additions and 39 deletions

View File

@ -34,6 +34,15 @@ Client
Lab Brick Digital Attenuator (LDA)
----------------------------------
Driver
++++++
.. automodule:: artiq.devices.lda.driver
:members:
Controller
++++++++++
On Linux, you need to give your user access to the USB device.
You can do that by creating a file under ``/etc/udev/rules.d/`` named
@ -56,15 +65,6 @@ Also, the ``SN:`` prefix is mandatory.
You can choose the LDA model with the ``-P`` parameter. The default is LDA-102.
Driver
++++++
.. automodule:: artiq.devices.lda.driver
:members:
Controller
++++++++++
.. argparse::
:ref: artiq.frontend.lda_controller.get_argparser
:prog: lda_controller
@ -88,6 +88,25 @@ Controller
Thorlabs T-Cube
---------------
TDC001 Driver
+++++++++++++
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tdc
:members:
TPZ001 Driver
+++++++++++++
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tpz
:members:
Controller
++++++++++
.. argparse::
:ref: artiq.frontend.thorlabs_tcube_controller.get_argparser
:prog: thorlabs_controller
.. _tdc001-controller-usage-example:
TDC001 controller usage example
@ -149,28 +168,21 @@ Then, send commands to it via the ``artiq_rpctool`` utility::
$ artiq_rpctool ::1 3255 call set_output_volts 150 # set output voltage to 150 V
$ artiq_rpctool ::1 3255 call close # close the device
TDC001 Driver
+++++++++++++
NI PXI6733
----------
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tdc
:members:
Driver
++++++
TPZ001 Driver
+++++++++++++
.. autoclass:: artiq.devices.thorlabs_tcube.driver.Tpz
.. automodule:: artiq.devices.pxi6733.driver
:members:
Controller
++++++++++
.. argparse::
:ref: artiq.frontend.thorlabs_tcube_controller.get_argparser
:prog: thorlabs_controller
NI PXI6733
----------
:ref: artiq.frontend.pxi6733_controller.get_argparser
:prog: pxi6733_controller
PXI6733 controller usage example
++++++++++++++++++++++++++++++++
@ -201,19 +213,3 @@ Then, send a load_sample_values command to it via the ``artiq_rpctool`` utility:
This loads 4 voltage values as a numpy float array: 1.0 V, 2.0 V, 3.0 V, 4.0 V
Then the device is set up to output those samples at each rising edge of the clock.
Driver
++++++
.. automodule:: artiq.devices.pxi6733.driver
:members:
Controller
++++++++++
Usage example
.. argparse::
:ref: artiq.frontend.pxi6733_controller.get_argparser
:prog: pxi6733_controller