forked from M-Labs/artiq
1
0
Fork 0

doc/core_device: update, add KC705 QC1 TTL table

This commit is contained in:
Sebastien Bourdeauducq 2015-08-18 16:04:27 +08:00
parent 2c15bd3e44
commit 178816243c
1 changed files with 23 additions and 7 deletions

View File

@ -26,7 +26,25 @@ FPGA board ports
KC705
-----
The main target board for the ARTIQ core device is the KC705 development board from Xilinx.
The main target board for the ARTIQ core device is the KC705 development board from Xilinx. It supports the NIST QC1 hardware via an adapter, and the NIST QC2 hardware (FMC).
With the QC1 hardware, the TTL lines are mapped as follows:
+--------------+------------+--------------+
| RTIO channel | TTL line | Capability |
+==============+============+==============+
| 0 | PMT0 | Input |
+--------------+------------+--------------+
| 1 | PMT1 | Input |
+--------------+------------+--------------+
| 2-16 | TTL0-14 | Output |
+--------------+------------+--------------+
| 17 | SMA_GPIO_N | Input+Output |
+--------------+------------+--------------+
| 18 | LED | Output |
+--------------+------------+--------------+
| 19 | TTL15 | Clock |
+--------------+------------+--------------+
Pipistrello
-----------
@ -44,17 +62,15 @@ When plugged to an adapter, the NIST QC1 hardware can be used. The TTL lines are
+--------------+----------+------------+
| 2-16 | TTL0-14 | Output |
+--------------+----------+------------+
| 17 | TTL15 | Clock |
| 17 | EXT_LED | Output |
+--------------+----------+------------+
| 18 | EXT_LED | Output |
| 18 | USER_LED | Output |
+--------------+----------+------------+
| 19 | USER_LED | Output |
+--------------+----------+------------+
| 20 | DDS | Output |
| 19 | TTL15 | Clock |
+--------------+----------+------------+
The input only limitation on channels 0 and 1 comes from the QC-DAQ adapter. When the adapter is not used (and physically unplugged from the Pipistrello board), the corresponding pins on the Pipistrello can be used as outputs. Do not configure these channels as outputs when the adapter is plugged, as this would cause electrical contention.
The board can accept an external RTIO clock connected to PMT2. If the DDS box
does not drive the PMT2 pair, use XTRIG and patch the XTRIG transciever output
does not drive the PMT2 pair, use XTRIG and patch the XTRIG transceiver output
on the adapter board onto C:15 disconnecting PMT2.