forked from M-Labs/artiq
1
0
Fork 0

kasli: Correct the GTP TX clock path during init

- TXOUT must be fed back into TXUSRCLK during initialization
- Now, MMCM Clock Input is switched before GTP TX Init is started instead of after GTP TX Init is done
- Reset in Sys Clock domain is kept asserted when clock is switched and GTP TX Init is NOT done
This commit is contained in:
linuswck 2023-11-03 10:24:54 +08:00 committed by Sébastien Bourdeauducq
parent ce80bf5717
commit bb0b8a6c00
5 changed files with 12 additions and 10 deletions

View File

@ -255,7 +255,7 @@ pub fn init() {
};
if switched == 0 {
info!("Switching sys clock, rebooting...");
clock::spin_us(500); // delay for clean UART log
clock::spin_us(3000); // delay for clean UART log
unsafe {
// clock switch and reboot will begin after TX is initialized
// and TX will be initialized after this

View File

@ -571,7 +571,7 @@ fn sysclk_setup() {
si5324::setup(&SI5324_SETTINGS, si5324::Input::Ckin1).expect("cannot initialize Si5324");
info!("Switching sys clock, rebooting...");
// delay for clean UART log, wait until UART FIFO is empty
clock::spin_us(1300);
clock::spin_us(3000);
unsafe {
csr::gt_drtio::stable_clkin_write(1);
}

View File

@ -18,7 +18,7 @@ class GTPSingle(Module):
# # #
self.stable_clkin = Signal()
self.clk_path_ready = Signal()
self.txenable = Signal()
self.submodules.encoder = encoder = Encoder(2, True)
self.submodules.decoders = decoders = [ClockDomainsRenamer("rtio_rx")(
@ -40,7 +40,7 @@ class GTPSingle(Module):
self.submodules += rx_init
self.comb += [
tx_init.stable_clkin.eq(self.stable_clkin),
tx_init.clk_path_ready.eq(self.clk_path_ready),
qpll_channel.reset.eq(tx_init.pllreset),
tx_init.plllock.eq(qpll_channel.lock)
]
@ -715,7 +715,7 @@ class GTP(Module, TransceiverInterface):
def __init__(self, qpll_channel, data_pads, sys_clk_freq, rtio_clk_freq, master=0):
self.nchannels = nchannels = len(data_pads)
self.gtps = []
self.clk_path_ready = Signal()
# # #
channel_interfaces = []
@ -736,7 +736,7 @@ class GTP(Module, TransceiverInterface):
TransceiverInterface.__init__(self, channel_interfaces)
for n, gtp in enumerate(self.gtps):
self.comb += [
gtp.stable_clkin.eq(self.stable_clkin.storage),
gtp.clk_path_ready.eq(self.clk_path_ready),
gtp.txenable.eq(self.txenable.storage[n])
]

View File

@ -10,7 +10,7 @@ __all__ = ["GTPTXInit", "GTPRXInit"]
class GTPTXInit(Module):
def __init__(self, sys_clk_freq, mode="single"):
self.stable_clkin = Signal()
self.clk_path_ready = Signal()
self.done = Signal()
self.restart = Signal()
@ -87,7 +87,7 @@ class GTPTXInit(Module):
startup_fsm.act("PLL_RESET",
self.pllreset.eq(1),
pll_reset_timer.wait.eq(1),
If(pll_reset_timer.done & self.stable_clkin,
If(pll_reset_timer.done & self.clk_path_ready,
NextState("GTP_RESET")
)
)

View File

@ -326,7 +326,8 @@ class MasterBase(MiniSoC, AMPSoC):
txout_buf = Signal()
self.specials += Instance("BUFG", i_I=gtp.txoutclk, o_O=txout_buf)
self.crg.configure(txout_buf, clk_sw=gtp.tx_init.done)
self.crg.configure(txout_buf, clk_sw=self.gt_drtio.stable_clkin.storage, ext_async_rst=self.crg.clk_sw_fsm.o_clk_sw & ~gtp.tx_init.done)
self.specials += MultiReg(self.crg.clk_sw_fsm.o_clk_sw & self.crg.mmcm_locked, self.gt_drtio.clk_path_ready, odomain="bootstrap")
platform.add_period_constraint(gtp.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtp.rxoutclk, rtio_clk_period)
@ -596,7 +597,8 @@ class SatelliteBase(BaseSoC, AMPSoC):
gtp = self.gt_drtio.gtps[0]
txout_buf = Signal()
self.specials += Instance("BUFG", i_I=gtp.txoutclk, o_O=txout_buf)
self.crg.configure(txout_buf, clk_sw=gtp.tx_init.done)
self.crg.configure(txout_buf, clk_sw=self.gt_drtio.stable_clkin.storage, ext_async_rst=self.crg.clk_sw_fsm.o_clk_sw & ~gtp.tx_init.done)
self.specials += MultiReg(self.crg.clk_sw_fsm.o_clk_sw & self.crg.mmcm_locked, self.gt_drtio.clk_path_ready, odomain="bootstrap")
platform.add_period_constraint(gtp.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtp.rxoutclk, rtio_clk_period)