forked from M-Labs/artiq
1
0
Fork 0

add servo docu

This commit is contained in:
SingularitySurfer 2022-06-21 09:29:42 +00:00
parent 8bea821f93
commit 57176fedb2
1 changed files with 20 additions and 0 deletions

View File

@ -122,6 +122,26 @@ class Phaser:
configured through a shared SPI bus that is accessed and controlled via configured through a shared SPI bus that is accessed and controlled via
FPGA registers. FPGA registers.
Each phaser output channel features a servo to control the RF output amplitude
using feedback from an ADC. The servo consists of a first order IIR (infinite
impulse response) filter fed by the ADC and a multiplier that scales the I
and Q datastreams from the DUC by the IIR output.
Each channels IIR features 4 profiles, each consisting of the [b0, b1, a1] filter
coefficients as well as an output offset. The coefficients and offset can be
set for each profile individually and the profiles each have their own filter
state. To avoid transient effects, care should be taken to not update the
coefficents in the currently selected profile.
The IIR output can be put on hold for each channel. In hold mode, the filter
still ingests samples and updates its input x0 and x1 registers, but does not
update the y0, y1 output registers. The servo can also be bypassed.
After power-up the servo is bypassed, in profile 0, with coefficients [0, 0, 0]
and hold is disabled. If older gateware without ther servo is loaded onto the
Phaser FPGA, the device simply behaves as if the servo is bypassed and none of
the servo functions have any effect.
.. note:: Various register settings of the DAC and the quadrature .. note:: Various register settings of the DAC and the quadrature
upconverters are available to be modified through the `dac`, `trf0`, upconverters are available to be modified through the `dac`, `trf0`,
`trf1` dictionaries. These can be set through the device database `trf1` dictionaries. These can be set through the device database