forked from M-Labs/artiq
gateware.spi: refactor, sim verified
This commit is contained in:
parent
bd9ceb4e12
commit
3b6999ac06
|
|
@ -1,11 +1,158 @@
|
|||
from itertools import product
|
||||
|
||||
from migen import *
|
||||
from migen.genlib.fsm import *
|
||||
from migen.genlib.misc import WaitTimer
|
||||
from migen.genlib.fsm import FSM, NextState
|
||||
from misoc.interconnect import wishbone
|
||||
|
||||
|
||||
class SPIClockGen(Module):
|
||||
def __init__(self, width):
|
||||
self.load = Signal(width)
|
||||
self.bias = Signal() # bias this clock phase to longer times
|
||||
self.edge = Signal()
|
||||
self.clk = Signal(reset=1)
|
||||
|
||||
cnt = Signal.like(self.load)
|
||||
self.comb += [
|
||||
self.edge.eq(cnt == 0),
|
||||
]
|
||||
self.sync += [
|
||||
cnt.eq(cnt - 1),
|
||||
If(self.edge,
|
||||
cnt.eq(self.load[1:] +
|
||||
(self.load[0] & self.bias)),
|
||||
self.clk.eq(~self.clk),
|
||||
)
|
||||
]
|
||||
|
||||
|
||||
class SPIRegister(Module):
|
||||
def __init__(self, width):
|
||||
self.data = Signal(width)
|
||||
self.o = Signal()
|
||||
self.i = Signal()
|
||||
self.lsb = Signal()
|
||||
self.shift = Signal()
|
||||
self.sample = Signal()
|
||||
|
||||
self.comb += [
|
||||
self.o.eq(Mux(self.lsb, self.data[0], self.data[-1])),
|
||||
]
|
||||
self.sync += [
|
||||
If(self.shift,
|
||||
If(self.lsb,
|
||||
self.data[:-1].eq(self.data[1:]),
|
||||
).Else(
|
||||
self.data[1:].eq(self.data[:-1]),
|
||||
)
|
||||
),
|
||||
If(self.sample,
|
||||
If(self.lsb,
|
||||
self.data[-1].eq(self.i),
|
||||
).Else(
|
||||
self.data[0].eq(self.i),
|
||||
)
|
||||
)
|
||||
]
|
||||
|
||||
|
||||
class SPIBitCounter(Module):
|
||||
def __init__(self, width):
|
||||
self.n_read = Signal(width)
|
||||
self.n_write = Signal(width)
|
||||
self.read = Signal()
|
||||
self.write = Signal()
|
||||
self.done = Signal()
|
||||
|
||||
self.comb += [
|
||||
self.write.eq(self.n_write != 0),
|
||||
self.read.eq(self.n_read != 0),
|
||||
self.done.eq(~(self.write | self.read)),
|
||||
]
|
||||
self.sync += [
|
||||
If(self.write,
|
||||
self.n_write.eq(self.n_write - 1),
|
||||
).Elif(self.read,
|
||||
self.n_read.eq(self.n_read - 1),
|
||||
)
|
||||
]
|
||||
|
||||
|
||||
class SPIMachine(Module):
|
||||
def __init__(self, data_width, clock_width, bits_width):
|
||||
ce = CEInserter()
|
||||
self.submodules.cg = ce(SPIClockGen(clock_width))
|
||||
self.submodules.reg = ce(SPIRegister(data_width))
|
||||
self.submodules.bits = ce(SPIBitCounter(bits_width))
|
||||
self.div_write = Signal.like(self.cg.load)
|
||||
self.div_read = Signal.like(self.cg.load)
|
||||
self.clk_phase = Signal()
|
||||
self.start = Signal()
|
||||
self.cs = Signal()
|
||||
self.oe = Signal()
|
||||
self.done = Signal()
|
||||
|
||||
# # #
|
||||
|
||||
fsm = CEInserter()(FSM("IDLE"))
|
||||
self.submodules += fsm
|
||||
|
||||
fsm.act("IDLE",
|
||||
If(self.start,
|
||||
If(self.clk_phase,
|
||||
NextState("WAIT"),
|
||||
).Else(
|
||||
NextState("SETUP"),
|
||||
)
|
||||
)
|
||||
)
|
||||
fsm.act("SETUP",
|
||||
self.reg.sample.eq(1),
|
||||
NextState("HOLD"),
|
||||
)
|
||||
fsm.act("HOLD",
|
||||
If(self.bits.done & ~self.start,
|
||||
If(self.clk_phase,
|
||||
NextState("IDLE"),
|
||||
).Else(
|
||||
NextState("WAIT"),
|
||||
)
|
||||
).Else(
|
||||
self.reg.shift.eq(1),
|
||||
NextState("SETUP"),
|
||||
)
|
||||
)
|
||||
fsm.act("WAIT",
|
||||
If(self.bits.done,
|
||||
NextState("IDLE"),
|
||||
).Else(
|
||||
NextState("SETUP"),
|
||||
)
|
||||
)
|
||||
|
||||
write0 = Signal()
|
||||
self.sync += [
|
||||
If(self.cg.edge & self.reg.shift,
|
||||
write0.eq(self.bits.write),
|
||||
)
|
||||
]
|
||||
self.comb += [
|
||||
self.cg.ce.eq(self.start | self.cs | ~self.cg.edge),
|
||||
If(self.bits.write | ~self.bits.read,
|
||||
self.cg.load.eq(self.div_write),
|
||||
).Else(
|
||||
self.cg.load.eq(self.div_read),
|
||||
),
|
||||
self.cg.bias.eq(fsm.before_entering("SETUP")),
|
||||
fsm.ce.eq(self.cg.edge),
|
||||
self.cs.eq(~fsm.ongoing("IDLE")),
|
||||
self.reg.ce.eq(self.cg.edge),
|
||||
self.bits.ce.eq(self.cg.edge & self.reg.sample),
|
||||
self.done.eq(self.cg.edge & self.bits.done & fsm.ongoing("HOLD")),
|
||||
self.oe.eq(write0 | self.bits.write),
|
||||
]
|
||||
|
||||
|
||||
class SPIMaster(Module):
|
||||
"""SPI Master.
|
||||
|
||||
|
|
@ -15,50 +162,61 @@ class SPIMaster(Module):
|
|||
* If there is a miso wire in pads, the input and output can be done
|
||||
with two signals (a.k.a. 4-wire SPI), else mosi must be used for
|
||||
both output and input (a.k.a. 3-wire SPI) and config.half_duplex
|
||||
needs to be set.
|
||||
* Every transfer consists of a 0-M bit write followed by a 0-M
|
||||
bit read.
|
||||
* cs_n is always asserted at the beginning and deasserted
|
||||
at the end of the transfer.
|
||||
must to be set when reading data is desired.
|
||||
* Every transfer consists of a write_length 0-M bit write followed
|
||||
by a read_length 0-M bit read.
|
||||
* cs_n is asserted at the beginning and deasserted at the end of the
|
||||
transfer if there is no other transfer pending.
|
||||
* cs_n handling is agnostic to whether it is one-hot or decoded
|
||||
somewhere downstream. If it is decoded, "cs_n all deasserted"
|
||||
should be handled accordingly (no slave selected).
|
||||
If it is one-hot, asserting multiple slaves should only be attempted
|
||||
if miso is either not connected between slaves or open collector.
|
||||
cs can also be handled independently through other means.
|
||||
if miso is either not connected between slaves, or open collector,
|
||||
or correctly multiplexed externally.
|
||||
* If config.cs_polarity == 0 (cs active low, the default),
|
||||
"cs_n all deasserted" means "all cs_n bits high".
|
||||
* cs is not mandatory in pads. Framing and chip selection can also
|
||||
be handled independently through other means.
|
||||
* The first bit output on mosi is always the MSB/LSB (depending on
|
||||
config.lsb_first) of the data register, independent of
|
||||
xfer.write_len. The last bit input from miso always ends up in
|
||||
the LSB/MSB (respectively) of the data register, independent of
|
||||
read_len.
|
||||
* For 4-wire SPI only the sum of read_len and write_len matters. The
|
||||
behavior is the same no matter how the transfer length is divided
|
||||
between the two. For 3-wire SPI, the direction of mosi/miso is
|
||||
switched from output to input after write_len cycles, at the
|
||||
"output" clk edge corresponding to bit write_len + 1 of the transfer.
|
||||
behavior is the same no matter how the total transfer length is
|
||||
divided between the two. For 3-wire SPI, the direction of mosi/miso
|
||||
is switched from output to input after write_len cycles, at the
|
||||
"shift_out" clk edge corresponding to bit write_length + 1 of the
|
||||
transfer.
|
||||
* Data output on mosi in 4-wire SPI during the read cycles is what
|
||||
is found in the data register at the time.
|
||||
Data in the data register outside the least/most (depending
|
||||
on config.lsb_first) significant read_len bits is what is
|
||||
on config.lsb_first) significant read_length bits is what is
|
||||
seen on miso during the write cycles.
|
||||
* When the transfer is complete the wishbone transaction is ack-ed.
|
||||
* Input data from the last transaction can be read from the data
|
||||
register at any time.
|
||||
* The SPI data register is double-buffered: once a transfer completes,
|
||||
the previous transfer's read data is available in the data register
|
||||
and new write data can be written, queuing a new transfer. Transfers
|
||||
submitted this way are chained and executed without deasserting cs.
|
||||
* A wishbone transaction is ack-ed when the transfer has been written
|
||||
to the intermediate buffer. It will be started when there are no
|
||||
other transactions being executed.
|
||||
|
||||
Transaction Sequence:
|
||||
* If desired, write the config register to set up the core.
|
||||
* If desired, write the xfer register to change lengths and cs_n.
|
||||
* Write the data register (also for zero-length writes),
|
||||
writing triggers the transfer and when the transfer is complete the
|
||||
write is ack-ed.
|
||||
writing triggers the transfer and when the transfer is accepted to
|
||||
the inermediate buffer, the write is ack-ed.
|
||||
* If desired, read the data register.
|
||||
* If desired write xfer and data for the next, chained, transfer
|
||||
|
||||
Register address and bit map:
|
||||
|
||||
config (address 2):
|
||||
1 offline: all pins high-z (reset=1)
|
||||
1 active: cs/transfer active
|
||||
1 pending: transfer pending in intermediate buffer, bus writes will
|
||||
block
|
||||
1 cs_polarity: active level of chip select (reset=0)
|
||||
1 clk_polarity: idle level for clk (reset=0)
|
||||
1 clk_phase: first edge after cs assertion to sample data on (reset=0)
|
||||
|
|
@ -68,11 +226,11 @@ class SPIMaster(Module):
|
|||
(1, 1): idle high, output on falling, input on rising
|
||||
1 lsb_first: LSB is the first bit on the wire (reset=0)
|
||||
1 half_duplex: 3-wire SPI, in/out on mosi (reset=0)
|
||||
10 undefined
|
||||
16 clk_load: clock load value to divide from this module's clock
|
||||
to the SPI write clk clk pulses are asymmetric
|
||||
if a divider is odd, favoring longer setup over hold times.
|
||||
clk/spi_clk == clk_load + 2 (reset=0)
|
||||
12 div_write: counter load value to divide this module's clock
|
||||
to the SPI write clk. clk pulses are asymmetric
|
||||
if the value is odd, favoring longer setup over hold times.
|
||||
f_clk/f_spi_write == div_write + 2 (reset=0)
|
||||
12 div_read: ditto for the read clock
|
||||
|
||||
xfer (address 1):
|
||||
16 cs: active high bit mask of chip selects to assert
|
||||
|
|
@ -89,50 +247,18 @@ class SPIMaster(Module):
|
|||
|
||||
###
|
||||
|
||||
# State machine
|
||||
wb_we = Signal()
|
||||
start = Signal()
|
||||
active = Signal()
|
||||
|
||||
fsm = FSM("IDLE")
|
||||
self.submodules += fsm
|
||||
|
||||
fsm.act("IDLE",
|
||||
If(bus.cyc & bus.stb,
|
||||
NextState("ACK"),
|
||||
If(bus.we,
|
||||
wb_we.eq(1),
|
||||
If(bus.adr == 0, # data register
|
||||
NextState("START"),
|
||||
)
|
||||
)
|
||||
)
|
||||
)
|
||||
fsm.act("START",
|
||||
start.eq(1),
|
||||
NextState("ACTIVE"),
|
||||
)
|
||||
fsm.act("ACTIVE",
|
||||
If(~active,
|
||||
bus.ack.eq(1),
|
||||
NextState("IDLE"),
|
||||
)
|
||||
)
|
||||
fsm.act("ACK",
|
||||
bus.ack.eq(1),
|
||||
NextState("IDLE"),
|
||||
)
|
||||
|
||||
# Wishbone
|
||||
config = Record([
|
||||
("offline", 1),
|
||||
("active", 1),
|
||||
("pending", 1),
|
||||
("cs_polarity", 1),
|
||||
("clk_polarity", 1),
|
||||
("clk_phase", 1),
|
||||
("lsb_first", 1),
|
||||
("half_duplex", 1),
|
||||
("padding", 10),
|
||||
("clk_load", 16),
|
||||
("div_write", 12),
|
||||
("div_read", 12),
|
||||
])
|
||||
config.offline.reset = 1
|
||||
assert len(config) <= len(bus.dat_w)
|
||||
|
|
@ -144,101 +270,96 @@ class SPIMaster(Module):
|
|||
])
|
||||
assert len(xfer) <= len(bus.dat_w)
|
||||
|
||||
data = Signal.like(bus.dat_w)
|
||||
|
||||
wb_data = Array([data, xfer.raw_bits(), config.raw_bits()])[bus.adr]
|
||||
self.comb += bus.dat_r.eq(wb_data)
|
||||
self.sync += If(wb_we, wb_data.eq(bus.dat_w))
|
||||
|
||||
# SPI
|
||||
write_count = Signal.like(xfer.write_length)
|
||||
read_count = Signal.like(xfer.read_length)
|
||||
clk_count = Signal.like(config.clk_load)
|
||||
clk = Signal(reset=1) # idle high
|
||||
phase = Signal()
|
||||
edge = Signal()
|
||||
write = Signal()
|
||||
read = Signal()
|
||||
miso = Signal()
|
||||
miso_i = Signal()
|
||||
mosi_o = Signal()
|
||||
spi = SPIMachine(data_width, clock_width=len(config.div_read),
|
||||
bits_width=len(xfer.read_length))
|
||||
self.submodules += spi
|
||||
|
||||
wb_we = Signal()
|
||||
pending = Signal()
|
||||
cs = Signal.like(xfer.cs)
|
||||
data_read = Signal.like(spi.reg.data)
|
||||
data_write = Signal.like(spi.reg.data)
|
||||
|
||||
self.comb += [
|
||||
phase.eq(clk ^ config.clk_phase),
|
||||
edge.eq(active & (clk_count == 0)),
|
||||
write.eq(write_count != 0),
|
||||
read.eq(read_count != 0),
|
||||
wb_we.eq(bus.cyc & bus.stb & bus.we & (~pending | spi.done)),
|
||||
bus.dat_r.eq(
|
||||
Array([data_read, xfer.raw_bits(), config.raw_bits()
|
||||
])[bus.adr]),
|
||||
spi.start.eq(pending & (~spi.cs | spi.done)),
|
||||
spi.clk_phase.eq(config.clk_phase),
|
||||
spi.reg.lsb.eq(config.lsb_first),
|
||||
spi.div_write.eq(config.div_write),
|
||||
spi.div_read.eq(config.div_read),
|
||||
]
|
||||
|
||||
self.sync += [
|
||||
If(start,
|
||||
write_count.eq(xfer.write_length),
|
||||
read_count.eq(xfer.read_length),
|
||||
active.eq(1),
|
||||
bus.ack.eq(~bus.we | ~pending | spi.done),
|
||||
If(wb_we,
|
||||
Array([data_write, xfer.raw_bits(), config.raw_bits()
|
||||
])[bus.adr].eq(bus.dat_w)
|
||||
),
|
||||
If(active,
|
||||
clk_count.eq(clk_count - 1),
|
||||
config.active.eq(spi.cs),
|
||||
config.pending.eq(pending),
|
||||
If(spi.done,
|
||||
data_read.eq(spi.reg.data),
|
||||
),
|
||||
If(start | edge,
|
||||
# setup time passes during phase 0
|
||||
# use the lsb to bias that time to favor longer setup times
|
||||
clk_count.eq(config.clk_load[1:] +
|
||||
(config.clk_load[0] & phase)),
|
||||
clk.eq(~clk), # idle high
|
||||
If(phase,
|
||||
data.eq(Mux(config.lsb_first,
|
||||
Cat(data[1:], miso),
|
||||
Cat(miso, data[:-1]))),
|
||||
mosi_o.eq(Mux(config.lsb_first, data[0], data[-1])),
|
||||
If(write,
|
||||
write_count.eq(write_count - 1),
|
||||
If(spi.start,
|
||||
cs.eq(xfer.cs),
|
||||
spi.bits.n_write.eq(xfer.write_length),
|
||||
spi.bits.n_read.eq(xfer.read_length),
|
||||
spi.reg.data.eq(data_write),
|
||||
pending.eq(0),
|
||||
),
|
||||
).Else(
|
||||
miso.eq(miso_i),
|
||||
If(~write & read,
|
||||
read_count.eq(read_count - 1),
|
||||
),
|
||||
),
|
||||
),
|
||||
If(~clk & edge & ~write & ~read, # always from low clk
|
||||
active.eq(0),
|
||||
If(wb_we & (bus.adr == 0), # data register
|
||||
pending.eq(1),
|
||||
),
|
||||
]
|
||||
|
||||
# I/O
|
||||
if hasattr(pads, "cs_n"):
|
||||
cs_n_t = TSTriple(len(pads.cs_n))
|
||||
self.specials += cs_n_t.get_tristate(pads.cs_n)
|
||||
self.comb += [
|
||||
cs_n_t.oe.eq(~config.offline),
|
||||
cs_n_t.o.eq((cs & Replicate(spi.cs, len(cs))) ^
|
||||
Replicate(~config.cs_polarity, len(cs))),
|
||||
]
|
||||
|
||||
clk_t = TSTriple()
|
||||
self.specials += clk_t.get_tristate(pads.clk)
|
||||
mosi_t = TSTriple()
|
||||
self.specials += mosi_t.get_tristate(pads.mosi)
|
||||
|
||||
self.comb += [
|
||||
cs_n_t.oe.eq(~config.offline),
|
||||
clk_t.oe.eq(~config.offline),
|
||||
mosi_t.oe.eq(~config.offline & (write | ~config.half_duplex)),
|
||||
cs_n_t.o.eq((xfer.cs & Replicate(active, len(xfer.cs))) ^
|
||||
Replicate(~config.cs_polarity, len(xfer.cs))),
|
||||
clk_t.o.eq((clk & active) ^ config.clk_polarity),
|
||||
miso_i.eq(Mux(config.half_duplex, mosi_t.i,
|
||||
mosi_t.oe.eq(~config.offline & spi.cs &
|
||||
(spi.oe | ~config.half_duplex)),
|
||||
clk_t.o.eq((spi.cg.clk & spi.cs) ^ config.clk_polarity),
|
||||
spi.reg.i.eq(Mux(config.half_duplex, mosi_t.i,
|
||||
getattr(pads, "miso", mosi_t.i))),
|
||||
mosi_t.o.eq(mosi_o),
|
||||
mosi_t.o.eq(spi.reg.o),
|
||||
]
|
||||
|
||||
|
||||
SPI_CONFIG_ADDR = 2
|
||||
SPI_XFER_ADDR = 1
|
||||
SPI_DATA_ADDR = 0
|
||||
SPI_OFFLINE = 1 << 0
|
||||
SPI_CS_POLARITY = 1 << 1
|
||||
SPI_CLK_POLARITY = 1 << 2
|
||||
SPI_CLK_PHASE = 1 << 3
|
||||
SPI_LSB_FIRST = 1 << 4
|
||||
SPI_HALF_DUPLEX = 1 << 5
|
||||
SPI_DATA_ADDR, SPI_XFER_ADDR, SPI_CONFIG_ADDR = range(3)
|
||||
(
|
||||
SPI_OFFLINE,
|
||||
SPI_ACTIVE,
|
||||
SPI_PENDING,
|
||||
SPI_CS_POLARITY,
|
||||
SPI_CLK_POLARITY,
|
||||
SPI_CLK_PHASE,
|
||||
SPI_LSB_FIRST,
|
||||
SPI_HALF_DUPLEX,
|
||||
) = (1 << i for i in range(8))
|
||||
|
||||
|
||||
def SPI_CLK_LOAD(i):
|
||||
return i << 16
|
||||
def SPI_DIV_WRITE(i):
|
||||
return i << 8
|
||||
|
||||
|
||||
def SPI_DIV_READ(i):
|
||||
return i << 20
|
||||
|
||||
|
||||
def SPI_CS(i):
|
||||
|
|
@ -253,53 +374,44 @@ def SPI_READ_LENGTH(i):
|
|||
return i << 24
|
||||
|
||||
|
||||
def _test_gen(bus):
|
||||
yield from bus.write(SPI_CONFIG_ADDR,
|
||||
1*SPI_CLK_PHASE | 0*SPI_LSB_FIRST |
|
||||
1*SPI_HALF_DUPLEX | SPI_CLK_LOAD(3))
|
||||
yield
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(0b00001) |
|
||||
SPI_WRITE_LENGTH(4) | SPI_READ_LENGTH(0))
|
||||
yield
|
||||
yield from bus.write(SPI_DATA_ADDR, 0x90000000)
|
||||
yield
|
||||
print(hex((yield from bus.read(SPI_DATA_ADDR))))
|
||||
yield
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(0b00010) |
|
||||
SPI_WRITE_LENGTH(4) | SPI_READ_LENGTH(4))
|
||||
yield
|
||||
yield from bus.write(SPI_DATA_ADDR, 0x81000000)
|
||||
yield
|
||||
print(hex((yield from bus.read(SPI_DATA_ADDR))))
|
||||
yield
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(0b00010) |
|
||||
SPI_WRITE_LENGTH(0) | SPI_READ_LENGTH(4))
|
||||
yield
|
||||
yield from bus.write(SPI_DATA_ADDR, 0x90000000)
|
||||
yield
|
||||
print(hex((yield from bus.read(SPI_DATA_ADDR))))
|
||||
yield
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(0b00010) |
|
||||
SPI_WRITE_LENGTH(32) | SPI_READ_LENGTH(0))
|
||||
yield
|
||||
yield from bus.write(SPI_DATA_ADDR, 0x87654321)
|
||||
yield
|
||||
print(hex((yield from bus.read(SPI_DATA_ADDR))))
|
||||
def _test_xfer(bus, cs, wlen, rlen, wdata):
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(cs) |
|
||||
SPI_WRITE_LENGTH(wlen) | SPI_READ_LENGTH(rlen))
|
||||
yield from bus.write(SPI_DATA_ADDR, wdata)
|
||||
yield
|
||||
|
||||
|
||||
def _test_read(bus, sync=SPI_ACTIVE | SPI_PENDING):
|
||||
while (yield from bus.read(SPI_CONFIG_ADDR)) & sync:
|
||||
pass
|
||||
return (yield from bus.read(SPI_DATA_ADDR))
|
||||
|
||||
|
||||
def _test_gen(bus):
|
||||
yield from bus.write(SPI_CONFIG_ADDR,
|
||||
0*SPI_CLK_PHASE | 0*SPI_LSB_FIRST |
|
||||
1*SPI_HALF_DUPLEX |
|
||||
SPI_DIV_WRITE(3) | SPI_DIV_READ(5))
|
||||
yield from _test_xfer(bus, 0b01, 4, 0, 0x90000000)
|
||||
print(hex((yield from _test_read(bus))))
|
||||
yield from _test_xfer(bus, 0b10, 0, 4, 0x90000000)
|
||||
print(hex((yield from _test_read(bus))))
|
||||
yield from _test_xfer(bus, 0b11, 4, 4, 0x81000000)
|
||||
print(hex((yield from _test_read(bus))))
|
||||
yield from _test_xfer(bus, 0b01, 8, 32, 0x87654321)
|
||||
yield from _test_xfer(bus, 0b01, 0, 32, 0x12345678)
|
||||
print(hex((yield from _test_read(bus, SPI_PENDING))))
|
||||
print(hex((yield from _test_read(bus, SPI_ACTIVE))))
|
||||
return
|
||||
for cpol, cpha, lsb, clk in product(
|
||||
(0, 1), (0, 1), (0, 1), (0, 1)):
|
||||
yield from bus.write(SPI_CONFIG_ADDR,
|
||||
cpol*SPI_CLK_POLARITY | cpha*SPI_CLK_PHASE |
|
||||
lsb*SPI_LSB_FIRST | SPI_CLK_LOAD(clk))
|
||||
lsb*SPI_LSB_FIRST | SPI_DIV_WRITE(clk) |
|
||||
SPI_DIV_READ(clk))
|
||||
for wlen, rlen, wdata in product((0, 8, 32), (0, 8, 32),
|
||||
(0, 0xffffffff, 0xdeadbeef)):
|
||||
yield from bus.write(SPI_XFER_ADDR, SPI_CS(0b00001) |
|
||||
SPI_WRITE_LENGTH(wlen) |
|
||||
SPI_READ_LENGTH(rlen))
|
||||
yield from bus.write(SPI_DATA_ADDR, wdata)
|
||||
rdata = yield from bus.read(SPI_DATA_ADDR)
|
||||
rdata = (yield from _test_xfer(bus, 0b1, wlen, rlen, wdata, True))
|
||||
len = (wlen + rlen) % 32
|
||||
mask = (1 << len) - 1
|
||||
if lsb:
|
||||
|
|
@ -336,10 +448,10 @@ if __name__ == "__main__":
|
|||
]
|
||||
Tristate.lower = staticmethod(lambda dr: T(dr))
|
||||
|
||||
from migen.fhdl.verilog import convert
|
||||
pads = _TestPads()
|
||||
dut = SPIMaster(pads)
|
||||
dut.comb += pads.miso.eq(pads.mosi)
|
||||
#print(convert(dut))
|
||||
# from migen.fhdl.verilog import convert
|
||||
# print(convert(dut))
|
||||
|
||||
run_simulation(dut, _test_gen(dut.bus), vcd_name="spi_master.vcd")
|
||||
|
|
|
|||
Loading…
Reference in New Issue