phaser: readback delay, test fastlink

artiq/gateware/rtio/phy/fastlink.py

@@ -114,12 +114,14 @@ class SerInterface(Module):
                              [pins_n.clk] + list(pins_n.mosi)):
             ddr = Signal()
             self.specials += [
-                DDROutput(d[-1], d[-2], ddr, ClockSignal("rio_phy")),
+                # d1 closer to q, LSB first
+                DDROutput(d[1], d[0], ddr, ClockSignal("rio_phy")),
                 DifferentialOutput(ddr, pp, pn),
             ]
         ddr = Signal()
         self.specials += [
             DifferentialInput(pins.miso, pins_n.miso, ddr),
-            DDRInput(ddr, self.data[-1][-1], self.data[-1][-2],
+            # q1 closer to d, MSB first
+            DDRInput(ddr, self.data[-1][1], self.data[-1][0],
                      ClockSignal("rio_phy")),
         ]

artiq/gateware/rtio/phy/phaser.py

@@ -38,20 +38,19 @@ class Phaser(Module):
                 len(self.serializer.payload)
         self.comb += self.serializer.payload.eq(Cat(header.raw_bits(), body))
 
-        self.sync.rio_phy += [
+        re_dly = Signal(3)  # stage, send, respond
+        self.sync.rtio += [
+            header.type.eq(1),  # reserved
             If(self.serializer.stb,
                 header.we.eq(0),
+                re_dly.eq(re_dly[1:]),
             ),
             If(self.config.o.stb,
-                header.we.eq(~self.config.o.address[-1]),
+                re_dly[-1].eq(~self.config.o.address[-1]),
+                header.we.eq(self.config.o.address[-1]),
                 header.addr.eq(self.config.o.address),
                 header.data.eq(self.config.o.data),
-                header.type.eq(1),  # reserved
             ),
-        ]
-
-        self.sync.rtio += [
-            self.config.i.stb.eq(self.config.o.stb &
-                self.config.o.address[-1]),
+            self.config.i.stb.eq(re_dly[0] & self.serializer.stb),
             self.config.i.data.eq(self.serializer.readback),
         ]

artiq/gateware/test/rtio/test_fastlink.py

@@ -0,0 +1,43 @@
+import unittest
+
+from migen import *
+from artiq.gateware.rtio.phy.fastlink import *
+
+
+
+class TestPhaser(unittest.TestCase):
+    def setUp(self):
+        self.dut = SerDes(n_data=8, t_clk=8, d_clk=0b00001111,
+                          n_frame=10, n_crc=6, poly=0x2f)
+
+    def test_init(self):
+        pass
+
+    def record_frame(self, frame):
+        clk = 0
+        marker = 0
+        state = "start"
+        while True:
+            clk = (clk << 2) & 0xff
+            clk |= (yield self.dut.data[0])
+            if clk == 0x0f:
+                marker = (marker << 1) & 0x7f
+                marker |= (yield self.dut.data[1]) & 1
+                if marker >> 1 == 0x01:
+                    if state == "start":
+                        state = "end"
+                    elif state == "end":
+                        break
+            yield
+            if state == "end":
+                data = yield from [(yield d) for d in self.dut.data]
+                frame.append(data)
+
+    def test_frame(self):
+        frame = []
+        run_simulation(self.dut, self.record_frame(frame),
+            clocks={n: 2 for n in ["sys", "rio", "rio_phy"]})
+        self.assertEqual(len(frame), 8*10//2)
+        self.assertEqual([d[0] for d in frame], [0, 0, 3, 3] * 10)
+        self.assertEqual([d[1] & 1 for d in frame[4*4 - 1:10*4 - 1:4]],
+                         [0, 0, 0, 0, 0, 1])