forked from M-Labs/artiq
1
0
Fork 0

firmware: add slave fpga serial load support

based on whitequark's work in f95fb27

m-labs/artiq#813
This commit is contained in:
Robert Jördens 2018-02-28 16:46:16 +00:00 committed by Robert Jordens
parent 1f999c7f5f
commit 0c49201be7
5 changed files with 86 additions and 0 deletions

View File

@ -41,6 +41,7 @@ dependencies = [
"board 0.0.0", "board 0.0.0",
"build_artiq 0.0.0", "build_artiq 0.0.0",
"build_misoc 0.0.0", "build_misoc 0.0.0",
"byteorder 1.2.1 (registry+https://github.com/rust-lang/crates.io-index)",
"log 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)", "log 0.4.1 (registry+https://github.com/rust-lang/crates.io-index)",
] ]

View File

@ -14,6 +14,7 @@ build_artiq = { path = "../libbuild_artiq" }
[dependencies] [dependencies]
bitflags = "1.0" bitflags = "1.0"
byteorder = { version = "1.0", default-features = false }
log = { version = "0.4", default-features = false } log = { version = "0.4", default-features = false }
board = { path = "../libboard" } board = { path = "../libboard" }

View File

@ -3,6 +3,7 @@
#[macro_use] #[macro_use]
extern crate bitflags; extern crate bitflags;
extern crate byteorder;
#[macro_use] #[macro_use]
extern crate log; extern crate log;
extern crate board; extern crate board;
@ -15,6 +16,8 @@ pub mod spi;
#[cfg(has_si5324)] #[cfg(has_si5324)]
pub mod si5324; pub mod si5324;
#[cfg(has_slave_fpga)]
pub mod slave_fpga;
#[cfg(has_serwb_phy_amc)] #[cfg(has_serwb_phy_amc)]
pub mod serwb; pub mod serwb;
#[cfg(has_hmc830_7043)] #[cfg(has_hmc830_7043)]

View File

@ -0,0 +1,79 @@
mod slave_fpga {
use board::{csr, clock};
use core::slice;
use byteorder::{ByteOrder, BigEndian};
const CCLK_BIT: u8 = 1 << 0;
const DIN_BIT: u8 = 1 << 1;
const DONE_BIT: u8 = 1 << 2;
const INIT_B_BIT: u8 = 1 << 3;
const PROGRAM_B_BIT: u8 = 1 << 4;
const GATEWARE: *mut u8 = csr::CONFIG_SLAVE_FPGA_GATEWARE as *mut u8;
unsafe fn shift_u8(data: u8) {
for i in 0..8 {
let mut bits: u8 = PROGRAM_B_BIT;
if data & (0x80 >> i) != 0 {
bits |= DIN_BIT;
}
// Without delays, this is about 6 MHz CCLK which is fine.
csr::slave_fpga_cfg::out_write(bits);
// clock::spin_us(1);
csr::slave_fpga_cfg::out_write(bits | CCLK_BIT);
// clock::spin_us(1);
}
}
pub fn load() -> Result<(), &'static str> {
info!("Loading slave FPGA gateware...");
let header = unsafe { slice::from_raw_parts(GATEWARE, 8) };
let magic = BigEndian::read_u32(&header[0..]);
let length = BigEndian::read_u32(&header[4..]) as usize;
if magic != 0x53415231 { // "SAR1"
return Err("Slave FPGA gateware magic not found");
} else if length > 0x220000 {
return Err("Slave FPGA gateware too large (corrupted?)");
}
info!("Slave FPGA gateware length: 0x{:06x}", length);
unsafe {
csr::slave_fpga_cfg::oe_write(CCLK_BIT | DIN_BIT | PROGRAM_B_BIT);
csr::slave_fpga_cfg::out_write(0);
clock::spin_us(1); // TPROGRAM=250ns min
csr::slave_fpga_cfg::out_write(PROGRAM_B_BIT);
clock::spin_us(5_000); // TPL=5ms max
if csr::slave_fpga_cfg::in_read() & INIT_B_BIT == 0 {
return Err("Slave FPGA did not initialize.");
}
for i in slice::from_raw_parts(GATEWARE.offset(8), length) {
shift_u8(*i);
if csr::slave_fpga_cfg::in_read() & INIT_B_BIT == 0 {
return Err("Slave FPGA error: INIT_B went low.");
}
}
let t = clock::get_ms();
while csr::slave_fpga_cfg::in_read() & DONE_BIT == 0 {
if clock::get_ms() > t + 100 {
error!("Slave FPGA not DONE after loading");
error!("Corrupt gateware? Slave FPGA in slave serial mode?");
return Err("Slave FPGA not DONE");
}
shift_u8(0xff);
}
shift_u8(0xff); // "Compensate for Special Startup Conditions"
csr::slave_fpga_cfg::out_write(PROGRAM_B_BIT);
}
Ok(())
}
}
pub fn load() -> Result<(), &'static str> {
slave_fpga::load()
}

View File

@ -72,6 +72,8 @@ fn startup() {
_ => info!("UART log level set to INFO by default") _ => info!("UART log level set to INFO by default")
} }
#[cfg(has_slave_fpga)]
board_artiq::slave_fpga::load().expect("cannot load RTM FPGA gateware");
#[cfg(has_serwb_phy_amc)] #[cfg(has_serwb_phy_amc)]
board_artiq::serwb::wait_init(); board_artiq::serwb::wait_init();