srenblad/artiq-zynq
1
0
Fork 0
forked from M-Labs/artiq-zynq
Code Pull Requests Activity
749 Commits 25 Branches 0 Tags 3.5 MiB
35ea0ed2ca
Commit Graph

48 Commits

Author SHA1 Message Date
morgan
35ea0ed2ca WRPLL: add filter for DRTIO 100MHz 2024-05-08 18:50:55 +08:00
morgan
cdf4ff24c0 WRPLL: replace PI controller with new filter 2024-05-08 18:50:55 +08:00
morgan
285b02c4b1 WRPLL: remove anti-windup 2024-05-08 18:50:55 +08:00
morgan
61315c29b9 Si549: recalibrate TAG_OFFSET for ISERDESE2 2024-04-29 13:03:30 +08:00
mwojcik
a30c7d1f3a runtime: drtio aux refactoring, revert async flag 2024-04-26 11:37:14 +08:00
mwojcik
2d10503c20 libboard_artiq: support multiple aux rx buffers 2024-04-24 17:12:57 +08:00
morgan
14fa038118 Firmware: Runtime WRPLL 
runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
 2024-04-12 16:38:46 +08:00
morgan
b81323af30 Firmware: Satman skew calibration & tester 
cargo template: add calibrate_wrpll_skew feature
tag collector: add TAG_OFFSET for Satman WRPLL
tag collector: add TAG_OFFSET getter & setter for calibration
wrpll: add skew tester and calibration
wrpll: gate calibration behind calibrate_wrpll_skew feature
 2024-04-12 16:38:46 +08:00
morgan
291777f764 Firmware: Satman WRPLL 
satman: drive CLK_SEL to true when si549 is used
satman : add main & helper si549 setup
satman : add WRPLL select_recovered_clock
si549: add tag collector to process gtx & main tags
si549: add frequency counter to set BASE_ADPLL
si549: add set_adpll for main & helper PLL
si549: add main & helper PLL
FIQ & si549: replace dummy with a custom handler for gtx & main tags ISR
 2024-04-12 16:38:39 +08:00
morgan
a1d80fb93b Firmware: Si549 and io_expander 
io_expander: set CLK_SEL pin to output when si549 is used
io_expander: gate virtual leds for standalone
si549: add bit bang i2c
si549: add si549 programming
si549: add main & helper setup
 2024-04-11 15:18:10 +08:00
morgan
63bf1c81d4 fiq: use dummy handler to fix compilation error 2024-03-07 13:26:52 +08:00
mwojcik
30e6bf4a3a subkernel: add support for (d)dma 2024-01-11 12:33:02 +08:00
mwojcik
8f4e30dd9c satman: support sub-subkernels, routing 2024-01-11 12:33:02 +08:00
mwojcik
e31a31c4ff master: drtioaux: 
- support async flag
- source in packets
- rerouting packets
 2024-01-11 12:33:02 +08:00
mwojcik
b76f634686 drtio: increase robustness for longer payloads 2023-11-02 14:48:52 +08:00
morgan
43e4527392 fix kasli-soc demo compilation warning 2023-10-25 11:45:13 +08:00
Egor Savkin
b768d5648c Add grabber module 
Signed-off-by: Egor Savkin <es@m-labs.hk>
 2023-10-16 14:35:20 +08:00
Sebastien Bourdeauducq
812aea33b3 rustfmt 2023-10-11 17:56:30 +08:00
linuswck
a4d1be00c0 Firmware: Add drtio_eem.rs support 
- Port from Artiq repo
- Initialize the drtio_eem on main, rtio_clocking
- Driver for eem_transceiver
 2023-10-10 11:22:05 +08:00
Sebastien Bourdeauducq
e5aafad60d force cargo to use our copy of zynq-rs 2023-10-09 18:27:58 +08:00
mwojcik
6785ca2c85 subkernel: port master support 2023-10-09 10:35:03 +08:00
Sebastien Bourdeauducq
37df7fd45b cargo fmt 2023-08-30 16:14:35 +08:00
morgan
2ac7eedec1 firmware: fix compilation without virtual LEDs 
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
 2023-08-30 15:33:44 +08:00
morgan
622d267d55 add virtual LEDs, improve IO expander setup, drive TX_DISABLE 
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
 2023-08-28 16:08:10 +08:00
Sebastien Bourdeauducq
ca17cd419e Revert "kasli_soc: add SFP0..3 LED indication" 
This reverts commit 5111778363.
 2023-08-03 10:42:09 +08:00
morgan
5111778363 kasli_soc: add SFP0..3 LED indication 
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
 2023-07-24 16:30:14 +08:00
mwojcik
6088e6bb6f fix cargo fmt 2023-05-24 10:00:48 +08:00
mwojcik
259b0ba1b7 satellite: port analyzer, drtio packets 2023-05-22 15:23:23 +08:00
mwojcik
48721ca9cb apply rustfmt policies to ddma code 2023-03-27 15:53:32 +08:00
mwojcik
908dfc780e satman: add dma support 2023-03-23 11:04:26 +08:00
Egor Savkin
a519d24074 firmware: create and apply rustfmt policy 
Co-authored-by: Egor Savkin <es@m-labs.hk>
Co-committed-by: Egor Savkin <es@m-labs.hk>
 2023-02-22 11:02:43 +08:00
Egor Savkin
05c22792d6 satman: drive SFP TX_DISABLE 
Co-authored-by: Egor Savkin <es@m-labs.hk>
Co-committed-by: Egor Savkin <es@m-labs.hk>
 2023-02-17 17:19:30 +08:00
mwojcik
46b2687d70 RTIO/SYS Clock merge 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2023-02-17 15:52:43 +08:00
David Nadlinger
8e0229d265 si5324: crystal_{ref -> as_ckin2} [nfc] 
This makes it clear that by itself, the flag does not
cause the input mux to be changed.
 2022-12-17 01:33:50 +00:00
David Nadlinger
2ddb4d259f Undo most of Si5324 unification (5c054cc901) 
This reverts most of 5c054cc901, as it turns out that
si5324::setup is in fact also used to configure the
chip for operation as a DRTIO satellite.
 2022-12-17 01:31:14 +00:00
David Nadlinger
5c054cc901 Unify Si5324 setup code with main ARTIQ repository [nfc] 
I chose the version from the main repository for two
reasons:
 - Explicitly specifying si5324_ref_input every time would
   not work for the different Kasli/… hardware versions.
 - Having `crystal_ref` as a setting in the configuration
   is misleading if it does not actually activate the crystal
   for use as a reference (but rather does
   `route_crystal_to_ckin2`).

Related m-labs/artiq commits:
 - 740543d4e284245248e3ff838c46505938dcae7a
 - 3c7a394eff553ab75a7ea78bdd17830366504dc6
 2022-12-12 23:22:01 +00:00
mwojcik
57d7f01b04 drtio: port 64-bit padding from mainline 2022-05-24 15:43:01 +08:00
mwojcik
14f7778732 update libconfig features 2022-04-08 10:30:21 +08:00
mwojcik
dcfb28ce61 fix drtioaux packet corruption 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-04-01 14:15:14 +08:00
Sebastien Bourdeauducq
426500d2f9 firmware: support 64-bit moninj probes 2022-03-17 20:26:44 +08:00
Sebastien Bourdeauducq
ebdb08180d drtio: demote default routing table message to info 2022-03-16 21:04:12 +08:00
mwojcik
9a06cd9d27 expose pca954x_select api (#167) 
PR accompanying to ARTIQ's PCA954X support (#1860).
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-03-02 10:52:27 +08:00
mwojcik
accac99f48 updated zynq-rs with pca9547 support (#165) 
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2022-02-11 13:53:58 +08:00
mwojcik
ada3f2e704 drtio: reading still needs work buffer after all 2021-11-29 12:46:08 +08:00
mwojcik
e8db2a4b49 drtio: crc from mainline, removed byte swap 2021-11-24 12:12:40 +08:00
mwojcik
8d2bb09149 add satman firmware (#136) 
Reviewed-on: M-Labs/artiq-zynq#136
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-08 16:04:50 +08:00
mwojcik
aaec0abdf6 fix build/warnings before drtio is fully merged 2021-10-06 16:17:19 +08:00
mwojcik
e6863263b4 add libboard_artiq (to be shared between runtime and satman) 
Reviewed-on: M-Labs/artiq-zynq#139
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
 2021-10-06 13:02:28 +08:00