started writing register definitions

libboard_zynq/src/sdio/regs.rs

@@ -0,0 +1,228 @@
+use volatile_register::{RO, RW, WO};
+
+use libregister::{register, register_at, register_bit, register_bits, register_bits_typed};
+
+#[allow(unused)]
+#[repr(u8)]
+pub enum CommandType {
+    Normal = 0b00,
+    Suspend = 0b01,
+    Resume = 0b10,
+    Abort = 0b11,
+}
+
+#[allow(unused)]
+#[repr(u8)]
+pub enum ResponseTypeSelect {
+    NoResponse = 0b00,
+    Length136 = 0b01,
+    Length48 = 0b10,
+    Legnth48Check = 0b11,
+}
+
+#[repr(C)]
+pub struct RegisterBlock {
+    pub sdma_system_address: RM<u32>,
+    pub block_size_block_count: BockSizeBlockCount,
+    pub argument: RW<u32>,
+    pub transfer_mode_command: TransferModeCommand,
+    pub responses: [RO<u32>; 4],
+    pub buffer: RW<u32>,
+    pub present_state: PresentState,
+}
+
+register_at!(RegisterBlock, 0xE0100000, sd0);
+register_at!(RegisterBlock, 0xE0101000, sd1);
+
+register!(block_size_block_count, BlockSizeBlockCount, RW, u32);
+register_bits!(
+    block_size_block_count,
+    /// Current transfer block count.
+    blocks_count,
+    u16,
+    16,
+    31
+);
+register_bits!(
+    block_size_block_count,
+    /// Host SDMA Buffer Size, size = 2^(val + 2) KB.
+    dma_buffer_size,
+    u8,
+    12,
+    14
+);
+register_bits!(
+    block_size_block_count,
+    /// Block size for data transfer. Unit: byte.
+    transfer_block_size,
+    u16,
+    0,
+    11
+);
+
+
+register!(transfer_mode_command, TransferModeCommand, RW, u32);
+register_bits!(
+    transfer_mode_command,
+    /// Command Number.
+    command_index,
+    u8,
+    24,
+    29
+);
+register_bits_typed!(
+    transfer_mode_command,
+    /// Command type register.
+    command_type,
+    u8,
+    CommandType,
+    24,
+    29
+);
+register_bit!(
+    transfer_mode_command,
+    /// 1 if data is present and shall be transferred using the DAT line.
+    data_present_select,
+    21
+);
+register_bit!(
+    transfer_mode_command,
+    /// If the index field shall be checked.
+    index_check_en,
+    20
+);
+register_bit!(
+    transfer_mode_command,
+    /// If CRC shall be checked.
+    crc_check_en,
+    19
+);
+register_bits_typed!(
+    transfer_mode_command,
+    /// Different type of response.
+    response_type_select,
+    u8,
+    ResponseTypeSelect,
+    16,
+    17
+);
+register_bit!(
+    transfer_mode_command,
+    /// Enables the multi block DAT line data transfer.
+    multi_block_en,
+    5
+);
+register_bit!(
+    transfer_mode_command,
+    /// 1 if read (card to host), 0 if write (host to card).
+    direction_select,
+    4
+);
+register_bit!(
+    transfer_mode_command,
+    /// If CMD12 shall be issued automatically when last block transfer is completed.
+    auto_cmd12_en,
+    2
+);
+register_bit!(
+    transfer_mode_command,
+    /// Enable the block count register.
+    block_count_en,
+    1
+);
+register_bit!(
+    transfer_mode_command,
+    /// Enable DMA,
+    dma_en,
+    0
+);
+
+
+register!(present_state, PresentState, RO, u32);
+register_bit!(
+    present_state,
+    /// CMD Line Signal Level.
+    cmd_line_level,
+    24
+);
+register_bit!(
+    present_state,
+    /// Signal level in DAT[3]
+    dat3_level,
+    23
+);
+register_bit!(
+    present_state,
+    /// Signal level in DAT[2]
+    dat2_level,
+    22
+);
+register_bit!(
+    present_state,
+    /// Signal level in DAT[1]
+    dat1_level,
+    21
+);
+register_bit!(
+    present_state,
+    /// Signal level in DAT[0]
+    dat0_level,
+    20
+);
+register_bit!(
+    present_state,
+    /// Write enabled and inverse of SDx_WP pin level.
+    write_enabled,
+    19
+);
+register_bit!(
+    present_state,
+    /// Card detected and inverse of SDx_CDn pin level.
+    card_detected,
+    18
+);
+regsiter_bit!(
+    present_state,
+    card_state_stable,
+    17
+);
+register_bit!(
+    present_state,
+    card_inserted,
+    16
+);
+register_bit!(
+    present_state,
+    buffer_read_en,
+    11,
+);
+register_bit!(
+    present_state,
+    buffer_write_en,
+    10
+);
+register_bit!(
+    present_state,
+    read_transfer_active,
+    9
+);
+register_bit!(
+    present_state,
+    write_transfer_active,
+    8
+);
+register_bit!(
+    present_state,
+    dat_line_active,
+    2
+);
+register_bit!(
+    present_state,
+    command_inhibit_dat,
+    1
+);
+register_bit!(
+    present_state,
+    command_inhibit_cmd,
+    0
+);