sinara-hw
/
datasheets
7
1
Fork 3
Code Issues 8 Pull Requests Projects Releases Wiki Activity
datasheets/2238.tex

663 lines
31 KiB
TeX
Raw Blame History

\documentclass[10pt]{datasheet}
\usepackage{palatino}
\usepackage{textgreek}
\usepackage{minted}
\usepackage{tcolorbox}
\usepackage{etoolbox}
\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}%
\AfterEndEnvironment{minted}{\end{tcolorbox}}%
\usepackage[justification=centering]{caption}
\usepackage[utf8]{inputenc}
\usepackage[english]{babel}
\usepackage[english]{isodate}
\usepackage{graphicx}
\usepackage{subfig}
\usepackage{tikz}
\usepackage{pgfplots}
\usepackage{circuitikz}
\usetikzlibrary{calc}
\usetikzlibrary{fit,backgrounds}
\title{2238 MCX-TTL}
\author{M-Labs Limited}
\date{January 2022}
\revision{Revision 1}
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
\begin{document}
\maketitle
\section{Features}
\begin{itemize}
\item{16 channels.}
\item{Input and output capable.}
\item{No galvanic isolation.}
\item{High speed and low jitter.}
\item{MCX connectors.}
\end{itemize}
\section{Applications}
\begin{itemize}
\item{Photon counting.}
\item{External equipment trigger.}
\item{Optical shutter control.}
\end{itemize}
\section{General Description}
The 2238 MCX-TTL card is a 4hp EEM module.
It adds general-purpose digital I/O capabilities to carrier cards such as 1124 Kasli and 1125 Kasli-SoC.
Each card provides four banks of four digital channels each, with MCX connectors, controlled through 2 EEM connectors.
Each EEM connector controls two banks independently.
Single EEM operation is possible.
The direction (input or output) of each bank can be selected using DIP switches.
Each channel supports 50\textOmega~terminations individually controllable using DIP switches.
This card can achieve higher speed and lower jitter than the isolated 2118/2128 BNC/SMA-TTL cards.
% Switch to next column
\vfill\break
\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}}
\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}}
\begin{figure}[h]
\centering
\scalebox{0.88}{
\begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]
% Node to pin-point the locations of MCX symbols
\draw[color=white, text=black] (-0.1, 0) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx0) {};
\draw[color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx1) {};
\draw[color=white, text=black] (-0.1, -0.7) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx2) {};
\draw[color=white, text=black] (-0.1, -1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx3) {};
\draw[color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx4) {};
\draw[color=white, text=black] (-0.1, -2.1) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx5) {};
\draw[color=white, text=black] (-0.1, -2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx6) {};
\draw[color=white, text=black] (-0.1, -2.8) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx7) {};
\draw[color=white, text=black] (-0.1, -3.5) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx8) {};
\draw[color=white, text=black] (-0.1, -3.85) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx9) {};
\draw[color=white, text=black] (-0.1, -4.2) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx10) {};
\draw[color=white, text=black] (-0.1, -4.55) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx11) {};
\draw[color=white, text=black] (-0.1, -5.25) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx12) {};
\draw[color=white, text=black] (-0.1, -5.6) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx13) {};
\draw[color=white, text=black] (-0.1, -5.95) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx14) {};
\draw[color=white, text=black] (-0.1, -6.3) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx15) {};
% Labels for IO 0-15
\node [label=left:\tiny{IO 0}] at (0.35, 0) {};
\node [label=left:\tiny{IO 1}] at (0.35, -0.35) {};
\node [label=left:\tiny{IO 2}] at (0.35, -0.7) {};
\node [label=left:\tiny{IO 3}] at (0.35, -1.05) {};
\node [label=left:\tiny{IO 4}] at (0.35, -1.75) {};
\node [label=left:\tiny{IO 5}] at (0.35, -2.1) {};
\node [label=left:\tiny{IO 6}] at (0.35, -2.45) {};
\node [label=left:\tiny{IO 7}] at (0.35, -2.8) {};
\node [label=left:\tiny{IO 8}] at (0.35, -3.5) {};
\node [label=left:\tiny{IO 9}] at (0.35, -3.85) {};
\node [label=left:\tiny{IO 10}] at (0.35, -4.2) {};
\node [label=left:\tiny{IO 11}] at (0.35, -4.55) {};
\node [label=left:\tiny{IO 12}] at (0.35, -5.25) {};
\node [label=left:\tiny{IO 13}] at (0.35, -5.6) {};
\node [label=left:\tiny{IO 14}] at (0.35, -5.95) {};
\node [label=left:\tiny{IO 15}] at (0.35, -6.3) {};
% Draw all female MCX connectors
% Bank 1
\begin{scope}[scale=0.07 , rotate=-90, xshift=0cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=10cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=15cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
% Bank 2
\begin{scope}[scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=30cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=35cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=40cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
% Bank 3
\begin{scope}[scale=0.07 , rotate=-90, xshift=50cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=55cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=60cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=65cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
% Bank 4
\begin{scope}[scale=0.07 , rotate=-90, xshift=75cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=80cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=85cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
\begin{scope}[scale=0.07 , rotate=-90, xshift=90cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end{scope}
% Draw bank boundaries
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx0)(mcx3)] (bank0) {};
\node[fill=white, scale=0.7, rotate=-90] at (bank0.west) {Bank 0};
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx4)(mcx7)] (bank1) {};
\node[fill=white, scale=0.7, rotate=-90] at (bank1.west) {Bank 1};
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx8)(mcx11)] (bank2) {};
\node[fill=white, scale=0.7, rotate=-90] at (bank2.west) {Bank 2};
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx12)(mcx15)] (bank3) {};
\node[fill=white, scale=0.7, rotate=-90] at (bank3.west) {Bank 3};
% Draw bus transceivers
\draw (3.8, -0.025) node[twoportshape,t={Bus Transceiver}, circuitikz/bipoles/twoport/width=2.0, scale=0.5, rotate=-90 ] (bus0) {};
\draw (3.8, -1.675) node[twoportshape,t={Bus Transceiver}, circuitikz/bipoles/twoport/width=2.0, scale=0.5, rotate=-90 ] (bus1) {};
\draw (3.8, -4.625) node[twoportshape,t={Bus Transceiver}, circuitikz/bipoles/twoport/width=2.0, scale=0.5, rotate=-90 ] (bus2) {};
\draw (3.8, -6.275) node[twoportshape,t={Bus Transceiver}, circuitikz/bipoles/twoport/width=2.0, scale=0.5, rotate=-90 ] (bus3) {};
% Draw termination switches
% Bus transceiver 0
\draw (2.6, 0.5) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch0) {};
\begin{scope}[xshift=2.7cm, yshift=0.53cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.8cm, yshift=0.53cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.9cm, yshift=0.53cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=3cm, yshift=0.53cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
% Bus transceiver 1
\draw (2.6, -1.15) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch1) {};
\begin{scope}[xshift=2.7cm, yshift=-1.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.8cm, yshift=-1.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.9cm, yshift=-1.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=3cm, yshift=-1.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
% Bus transceiver 2
\draw (2.6, -5.15) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch2) {};
\begin{scope}[xshift=2.7cm, yshift=-5.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.8cm, yshift=-5.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.9cm, yshift=-5.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=3cm, yshift=-5.12cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
% Bus transceiver 3
\draw (2.6, -6.8) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch3) {};
\begin{scope}[xshift=2.7cm, yshift=-6.77cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.8cm, yshift=-6.77cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=2.9cm, yshift=-6.77cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=3cm, yshift=-6.77cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
% Left-extend the upcoming boundary
\draw[color=white, text=black] (1.9, -3.15) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (bus_west) {};
% Connect bus transceivers & termination switches to the boundary (I/O side)
\draw [latexslim-latexslim] (3.55, -0.4) -- (1.55, -0.4);
\draw [-] (termswitch0.south) -- (2.6, -0.4);
\node [label=center:\tiny{IO}] at (2.1, -0.3) {};
\node [label=center:\tiny{0,2,4,6}] at (2.1, -0.5) {};
\draw [latexslim-latexslim] (3.55, -2.05) -- (1.55, -2.05);
\draw [-] (termswitch1.south) -- (2.6, -2.05);
\node [label=center:\tiny{IO}] at (2.1, -1.95) {};
\node [label=center:\tiny{8,10,12,14}] at (2.1, -2.15) {};
\draw [latexslim-latexslim] (3.55, -4.25) -- (1.55, -4.25);
\draw [-] (termswitch2.north) -- (2.6, -4.25);
\node [label=center:\tiny{IO}] at (2.1, -4.15) {};
\node [label=center:\tiny{1,3,5,7}] at (2.1, -4.35) {};
\draw [latexslim-latexslim] (3.55, -5.85) -- (1.55, -5.85);
\draw [-] (termswitch3.north) -- (2.6, -5.85);
\node [label=center:\tiny{IO}] at (2.1, -5.75) {};
\node [label=center:\tiny{9,11,13,15}] at (2.1, -5.95) {};
% Connect bus transceivers to the boundary (EEM side)
\draw [latexslim-latexslim] (4.05, 0.35) -- (5.2, 0.35);
\node [label=center:\tiny{EEM}] at (4.65, 0.45) {};
\node [label=center:\tiny{0,2,4,6}] at (4.65, 0.25) {};
\draw [latexslim-] (4.05, -0.4) -- (5.2, -0.4);
\node [label=center:\tiny{Direction}] at (4.65, -0.3) {};
\node [label=center:\tiny{Bank 0,1}] at (4.65, -0.5) {};
\draw [latexslim-latexslim] (4.05, -1.3) -- (5.2, -1.3);
\node [label=center:\tiny{EEM}] at (4.65, -1.2) {};
\node [label=center:\tiny{8,10,12,14}] at (4.65, -1.4) {};
\draw [latexslim-] (4.05, -2.05) -- (5.2, -2.05);
\node [label=center:\tiny{Direction}] at (4.65, -1.95) {};
\node [label=center:\tiny{Bank 2,3}] at (4.65, -2.15) {};
\draw [latexslim-latexslim] (4.05, -4.25) -- (5.2, -4.25);
\node [label=center:\tiny{EEM}] at (4.65, -4.15) {};
\node [label=center:\tiny{1,3,5,7}] at (4.65, -4.35) {};
\draw [latexslim-] (4.05, -5) -- (5.2, -5);
\node [label=center:\tiny{Direction}] at (4.65, -4.9) {};
\node [label=center:\tiny{Bank 0,1}] at (4.65, -5.1) {};
\draw [latexslim-latexslim] (4.05, -5.85) -- (5.2, -5.85);
\node [label=center:\tiny{EEM}] at (4.65, -5.75) {};
\node [label=center:\tiny{9,11,13,15}] at (4.65, -5.95) {};
\draw [latexslim-] (4.05, -6.6) -- (5.2, -6.6);
\node [label=center:\tiny{Direction}] at (4.65, -6.5) {};
\node [label=center:\tiny{Bank 2,3}] at (4.65, -6.7) {};
% Right-extend the upcoming boundary
\draw[color=white, text=black] (4.85, -3.15) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (bus_east) {};
% Draw central tranceivers boundary
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.4em, fit=(bus0)(termswitch3)(bus_west)(bus_east)] () {};
% Draw partition between baseboard and mezzanie with labels at the center
\draw [line width=0.4mm] (bus_west) -- (bus_east);
\node [label=above:{Baseboard}] at (3.375, -3.15) {};
\node [label=below:{Mezzanie}] at (3.375, -3.15) {};
% Connect I/Os to tranceivers block
\draw [latexslim-latexslim] (mcx0) -- (1.5, 0);
\draw [latexslim-latexslim] (mcx1) -- (1.5, -0.35);
\draw [latexslim-latexslim] (mcx2) -- (1.5, -0.7);
\draw [latexslim-latexslim] (mcx3) -- (1.5, -1.05);
\draw [latexslim-latexslim] (mcx4) -- (1.5, -1.75);
\draw [latexslim-latexslim] (mcx5) -- (1.5, -2.1);
\draw [latexslim-latexslim] (mcx6) -- (1.5, -2.45);
\draw [latexslim-latexslim] (mcx7) -- (1.5, -2.8);
\draw [latexslim-latexslim] (mcx8) -- (1.5, -3.5);
\draw [latexslim-latexslim] (mcx9) -- (1.5, -3.85);
\draw [latexslim-latexslim] (mcx10) -- (1.5, -4.2);
\draw [latexslim-latexslim] (mcx11) -- (1.5, -4.55);
\draw [latexslim-latexslim] (mcx12) -- (1.5, -5.25);
\draw [latexslim-latexslim] (mcx13) -- (1.5, -5.6);
\draw [latexslim-latexslim] (mcx14) -- (1.5, -5.95);
\draw [latexslim-latexslim] (mcx15) -- (1.5, -6.3);
% Draw LVDS transceivers
\draw (6.6, -0.025) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds0) {};
\draw (6.6, -1.675) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds1) {};
\draw (6.6, -4.625) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds2) {};
\draw (6.6, -6.275) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds3) {};
% Aesthetic EEPROM at each end of LVDS transceivers
\draw (6.6, 1.1) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (eeprom0) {};
\draw (6.6, -7.4) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (eeprom1) {};
% I/O expander
\draw (8.2, -3.5) node[twoportshape,t=\MymyLabel{IO Expander}{for I2C Bus}, circuitikz/bipoles/twoport/width=1.8, scale=0.5] (i2c) {};
% I/O direction switches
\draw (6.6, -2.8) node[twoportshape,t=\MymyLabel{Per-bank \phantom{space} }{Input/Output Switch}, circuitikz/bipoles/twoport/width=2.7, scale=0.44] (ioswitch) {};
\begin{scope}[xshift=6.85cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=6.95cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=7.05cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
\begin{scope}[xshift=7.15cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
\draw (0.4,0) to[short,-o](0.75,0);
\draw (0.78,0)-- +(30:0.46);
\draw (1.25,0)to[short,o-](1.6,0) ;
\end{scope}
% EEM Ports
\draw (8.2, -0.5) node[twoportshape, t={EEM Port 0}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem0) {};
\draw (8.2, -5.8) node[twoportshape, t={EEM Port 1}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem1) {};
% Connect I/O expander & direction switches to bus transceivers block, with labelling
\draw [latexslim-latexslim] (i2c.west) -- (5.25, -3.5);
\draw [-] (ioswitch.south) -- (6.6, -3.5);
\node [label=center:\tiny{Direction}] at (5.8, -3.4) {};
\node [label=center:\tiny{Bank 0..3}] at (5.8, -3.6) {};
% Connect LVDS transceivers to bus transceivers, with labelling
\draw [latexslim-latexslim] (lvds0.south) -- (5.25, -0.025);
\node [label=center:\tiny{EEM}] at (5.7, 0.075) {};
\node [label=center:\tiny{0..3}] at (5.7, -0.125) {};
\draw [latexslim-latexslim] (lvds1.south) -- (5.25, -1.675);
\node [label=center:\tiny{EEM}] at (5.7, -1.575) {};
\node [label=center:\tiny{4..7}] at (5.7, -1.775) {};
\draw [latexslim-latexslim] (lvds2.south) -- (5.25, -4.625);
\node [label=center:\tiny{EEM}] at (5.7, -4.525) {};
\node [label=center:\tiny{8..11}] at (5.7, -4.725) {};
\draw [latexslim-latexslim] (lvds3.south) -- (5.25, -6.275);
\node [label=center:\tiny{EEM}] at (5.7, -6.175) {};
\node [label=center:\tiny{12..15}] at (5.7, -6.375) {};
% Connect EEM0 & EEM1
\draw [latexslim-latexslim] (lvds0.north) -- (7.85, -0.025);
\draw [latexslim-latexslim] (lvds1.north) -- (7.85, -1.675);
\draw [latexslim-latexslim] (lvds2.north) -- (7.85, -4.625);
\draw [latexslim-latexslim] (lvds3.north) -- (7.85, -6.275);
\draw [latexslim-latexslim] (eeprom0.east) -- (7.85, 1.1);
\draw [latexslim-latexslim] (eeprom1.east) -- (7.85, -7.4);
\draw [latexslim-latexslim] (eem0.east) -- (i2c.north);
% Reminder: IO directions are only selectable by bank. Channels from the same bank must have the same IO direction.
% Might be unnecessary as I/O directions signals are labelled with the "Bank" prefix.
\node [label={center:\tiny{Channels from the same bank must have the same IO direction.}}] at (2.2, -7.3) {};
\end{circuitikz}
}
\caption{Simplified Block Diagram}
\end{figure}
\begin{figure}[hbt!]
\centering
\includegraphics[width=3.6in]{photo2238.jpg}
\caption{MCX-TTL Card photo}
\end{figure}
% For wide tables, a single column layout is better. It can be switched
% page-by-page.
\onecolumn
\section{Electrical Specifications}
\begin{table}[h]
\begin{threeparttable}
\caption{Recommended Operating Conditions}
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
\thickhline
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
\textbf{Unit} & \textbf{Conditions} \\
\hline
Input voltage & $V_{I}$ & 0 & & 5.5 & V \\
\hline
High-level output current & $I_{OH}$ & & & -24 & mA \\
\hline
Low-level output current & $I_{OL}$ & & & 24 & mA \\
\hline
Input edge rate & $\frac{\Delta t}{\Delta V}$ & 0 & & 10 & ns/V & $0.8V \leq V_I \leq 2.0V$ \\
\thickhline
\end{tabularx}
\end{threeparttable}
\end{table}
The recommended operating temperature is $-40\degree C \leq T_A \leq 85\degree C$.
All specifications are in the recommended operating temperature range unless otherwise noted.
\begin{table}[h]
\begin{threeparttable}
\caption{Electrical Characteristics}
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
\thickhline
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
\textbf{Unit} & \textbf{Conditions} \\
\hline
Input clamp diode voltage & $V_{IK}$ & & & -1.2 & V & $I_I =-36 mA$ \\
\hline
Input high voltage & $V_{IH}$ & 2.0 & & & V & \\
\hline
Input low voltage & $V_{IL}$ & & & 0.8 & V & \\
\hline
Output high voltage & $V_{OH}$ & 2.0 & & & V & $I_{OH}=-24mA$ \\
& & 3.1 & & & V & $I_{OH}=-200\mu A$ \\
\hline
Output low voltage & $V_{OL}$ & & & 0.8 & V & $I_{OL}=-24mA$ \\
& & & & 0.2 & V & $I_{OL}=-200\mu A$ \\
\hline
Input current & $I_I$ & & & 20 & \textmu A & $V_I=5.5V$ \\
& & & & 2 & \textmu A & $V_I=3.3V$ \\
& & & & -10 & \textmu A & $V_I=0V$ \\
\hline
Quiet output & & & & & & $C_L=50pF$, $R_L=500\Omega$, $T_A=25\degree C$\\
\hspace{3mm} Maximum dynamic $V_{OL}$ & $V_{OLP}$ & & 0.8 & & V & \\
\hspace{3mm} Minimum dynamic $V_{OL}$ & $V_{OLV}$ & & -0.8 & & V & \\
\hline
Input/Output capacitance & $C_{I/O}$ & 8 & & & pF & 1 MHz frequency\\
\thickhline
\end{tabularx}
\end{threeparttable}
\end{table}
\newpage
\section{Example ARTIQ code}
The sections below demonstrate simple usage scenarios of the 2245 LVDS-TTL card with the ARTIQ control system.
They do not exhaustively demonstrate all the features of the ARTIQ system.
The full documentation for the ARTIQ software and gateware is available at \url{https://m-labs.hk}.
Timing accuracy in the examples below is well under 1 nanosecond thanks to the ARTIQ RTIO system.
\subsection{One pulse per second}
The channel should be configured as output in both the gateware and hardware.
\begin{minted}{python}
@kernel
def run(self):
self.core.reset()
while True:
self.ttl0.pulse(500*ms)
delay(500*ms)
\end{minted}
\subsection{Morse code}
This example demonstrates some basic algorithmic features of the ARTIQ-Python language.
\begin{minted}{python}
def prepare(self):
# As of ARTIQ-6, the ARTIQ compiler has limited string handling
# capabilities, so we pass a list of integers instead.
message = ".- .-. - .. --.-"
self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message]
@kernel
def run(self):
self.core.reset()
for cmd in self.commands:
if cmd == 1:
self.led.pulse(100*ms)
delay(100*ms)
if cmd == 2:
self.led.pulse(300*ms)
delay(100*ms)
if cmd == 3:
delay(700*ms)
\end{minted}
\newpage
\subsection{Counting rising edges in a 1ms window}
The channel should be configured as input in both the gateware and hardware.
\begin{minted}{python}
@kernel
def run(self):
self.core.reset()
gate_end_mu = self.ttl0.gate_rising(1*ms)
counts = self.ttl0.count()
print(counts)
\end{minted}
This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second.
If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second:
\begin{minted}{python}
@kernel
def run(self):
self.core.reset()
self.edgecounter0.gate_rising(1*ms)
counts = self.edgecounter0.fetch_count()
print(counts)
\end{minted}
\subsection{Responding to an external trigger}
One channel needs to be configured as input, and the other as output.
\begin{minted}{python}
@kernel
def run(self):
self.core.reset()
self.ttlin.gate_rising(5*ms)
timestamp_mu = self.ttlin.timestamp_mu()
at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms))
self.ttlout.pulse(1*us)
\end{minted}
\section{Ordering Information}
To order, please visit \url{https://m-labs.hk} and select the 2238 MCX-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}.
\section*{}
\vspace*{\fill}
\begin{footnotesize}
Information furnished by M-Labs Limited is believed to be accurate and reliable. However, no responsibility is assumed by M-Labs Limited for its use, nor for any infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice.
\end{footnotesize}
\end{document}
Reference in New Issue View Git Blame Copy Permalink