occheung
2127697fe6
4410-4412: update set() parameters
...
Note that the `frequency` param is mandatory in AD9912.set(), while optional in AD9910.set()
2021-12-08 12:17:27 +08:00
occheung
b9c7dcec67
4410: add amp modulation waveform
2021-12-07 16:38:56 +08:00
occheung
aa96ed4ab3
4410: fix whitespace in ram example
2021-12-07 16:35:03 +08:00
occheung
60861ccf1f
4410: mention default profile for single-tone
2021-12-07 16:29:35 +08:00
occheung
8f1a437378
4410: add ram modulation with synchronization example
2021-12-07 16:26:25 +08:00
occheung
011d63f3eb
4410: modify ram example
...
* Use `prepare()` to init the arrays, would be great if the value can be prepared there. However, the type check was not happy about it.
* Separate RAM configuration into a separate function
* Separate DDS init, digital attenuation & switch config in an init function
* Use `dds.set()`. It is supposed to look simple.
All these are to avoid repeating the long code in the coming RAM+SYNC example.
2021-12-07 16:21:56 +08:00
occheung
0dbf7a70c4
4410: add phase param to single-tone sync e.g.
...
+- 0.25 turns w.r.t the other channel, excluding I/O update mismatch
2021-12-07 16:20:18 +08:00
occheung
7265d05bae
4410-4412: remove leftover comment
2021-12-07 16:19:05 +08:00
occheung
b657e0fea5
4410-4412: clarify nominal power
...
The same figure can be found in sinara issue 354 / urukul issue 3, and it was meant to be an empirical limit for low frequency RF outputs.
2021-12-06 13:17:19 +08:00
occheung
ca896ed094
4410-4412: fix phase noise layout, add harmonics
2021-12-06 13:06:24 +08:00
occheung
e109ec2b6f
4410-4412: fix performance data condition
...
The condition should now align with wiki and sinara issue 354 / urukul issue 3.
2021-12-06 13:05:46 +08:00
occheung
41c6e37c74
4410-4412: fix caption
2021-12-06 12:39:35 +08:00
occheung
894823d2d4
4410-4412: remove phase param from single-tone e.g.
2021-12-06 11:53:45 +08:00
occheung
74bc8ef797
4410-4412: add waveform for ram mod e.g.
2021-12-06 11:52:31 +08:00
occheung
11b1aee030
4410-4412: specify digital for attenuator specs
2021-12-06 10:46:39 +08:00
occheung
3b4b44c833
4410-4412: remove air flow spec
2021-12-06 10:43:49 +08:00
occheung
c5c8701341
4410-4412: fix photo
2021-12-02 13:31:04 +08:00
occheung
69da8ea9b4
4410 -> 4410-4412, 4410/4412
2021-12-02 13:29:35 +08:00
occheung
5837353cab
4410: fix table/text sequence
2021-12-02 10:13:14 +08:00
occheung
0b28c4fbb2
4410: fix condition case
2021-12-02 09:56:47 +08:00
occheung
cf9d395947
4410: add recommended env
2021-12-01 16:13:44 +08:00
occheung
5c18e9267d
4410 diagram: sync only available to AD9910
2021-12-01 13:03:42 +08:00
occheung
6ef53abe0e
4410: add electrical characteristics
2021-12-01 12:05:20 +08:00
occheung
da7058d442
4410: include asf, pow param in example
2021-12-01 12:04:38 +08:00
occheung
816f19c027
init urukul 4410
2021-11-30 14:17:02 +08:00
Sebastien Bourdeauducq
9733bd17c2
remove PDF output
2021-11-09 08:56:40 +08:00
kai
a1e3cbd819
update 2128
2021-07-27 17:10:27 +08:00
Sebastien Bourdeauducq
de4fd7bd0f
initial commit
2021-07-19 16:49:16 +08:00
occheung
Sebastien Bourdeauducq
kai