dio: rename transceivers on the IO side

Naming all transceivers on the IO side as "IO Bus Transceiver(s)".
Just to differentiate it from LVDS transceivers.
Closes #21.
This commit is contained in:
occheung 2022-01-14 14:41:11 +08:00
parent b0851a479e
commit 4ef628b708
2 changed files with 4 additions and 4 deletions

View File

@ -117,7 +117,7 @@ The card support a minimum pulse width of 3ns.
\draw (1.6,-1.05) node[twoportshape,t={Octal Bus Transceiver}, circuitikz/bipoles/twoport/width=2.5, scale=0.7, rotate=-90 ] (bus1) {};
\draw (1.6,-1.05) node[twoportshape,t={IO Bus Transceiver}, circuitikz/bipoles/twoport/width=2.5, scale=0.7, rotate=-90 ] (bus1) {};
\draw (3.05,-0) node[twoportshape,t={Isolator}, circuitikz/bipoles/twoport/width=1.3, scale=0.4] (iso1) {};
\draw (3.05,-0.7) node[twoportshape,t={Isolator}, circuitikz/bipoles/twoport/width=1.3, scale=0.4] (iso2) {};
@ -238,7 +238,7 @@ The card support a minimum pulse width of 3ns.
\end{scope}
\draw (1.6,-1.05) node[twoportshape,t={Octal Bus Transceiver}, circuitikz/bipoles/twoport/width=2.5, scale=0.7, rotate=-90 ] (bus2) {};
\draw (1.6,-1.05) node[twoportshape,t={IO Bus Transceiver}, circuitikz/bipoles/twoport/width=2.5, scale=0.7, rotate=-90 ] (bus2) {};
\draw (3.05,-0) node[twoportshape,t={Isolator}, circuitikz/bipoles/twoport/width=1.3, scale=0.4] (iso5) {};
\draw (3.05,-0.7) node[twoportshape,t={Isolator}, circuitikz/bipoles/twoport/width=1.3, scale=0.4] (iso6) {};

View File

@ -238,8 +238,8 @@ This card can achieve higher speed and lower jitter than the isolated 2118/2128
\node[fill=white, scale=0.7, rotate=-90] at (bank3.west) {Bank 3};
% Draw bus transceivers
\draw (3.25, -0.7) node[twoportshape,t=\MymyLabel{2x 16-bits Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus0) {};
\draw (3.25, -5.6) node[twoportshape,t=\MymyLabel{2x 16-bits Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus1) {};
\draw (3.25, -0.7) node[twoportshape,t=\MymyLabel{2x IO Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus0) {};
\draw (3.25, -5.6) node[twoportshape,t=\MymyLabel{2x IO Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus1) {};
% Draw termination switches
% Bus transceiver 0