assembly/src/sw_sup/flashing_firmware.md

Flashing the Firmware

Here are some extra steps needed for flashing the firmware.

Kasli

Windows

From the official manual:

On Windows, a third-party tool, Zadig, is necessary. Use it as follows:

1. Make sure the FPGA board’s JTAG USB port is connected to your computer.
2. Activate Options → List All Devices.
3. Select the “Digilent Adept USB Device (Interface 0)” or “FTDI Quad-RS232 HS” (or similar) device from the drop-down list.
4. Select WinUSB from the spinner list.
5. Click “Install Driver” or “Replace Driver”.

You may need to repeat these steps every time you plug the FPGA board into a port where it has not been plugged into previously on the same system.