assembly/src/hw/zotino_fastino.md

Sinara 5432 DAC Zotino / Sinara 5632 DAC Fastino

• Datasheet Zotino
• Wiki Zotino
• Wiki Fastino

JSON

{
  "type": "zotino",
  "ports": [<port num>]
}

{
  "type": "fastino",
  "hw_rev": "v1.2", // optional
  "ports": [<port num>]
}

Setup

Connect the BNC/SMA-IDC adapters to the Zotino/Fastino with 26-pin cable if needed by customer. Be aware of the ports order - see reference numbers on the board.

Testing

After running artiq_sinara_test:

*** Testing Zotino DACs and USER LEDs.
Voltages:
zotino0 0.1 -0.1 0.2 -0.2 0.3 -0.3 0.4 -0.4 0.5 -0.5 0.6 -0.6 0.7 -0.7 0.8 -0.8 0.9 -0.9 1.0 -1.0 1.1 -1.1 1.2 -1.2 1.3 -1.3 1.4 -1.4 1.5 -1.5 1.6 -1.6
Press ENTER when done.

*** Testing Fastino DACs and USER LEDs.
Voltages:
fastino0 0.1 -0.1 0.2 -0.2 0.3 -0.3 0.4 -0.4 0.5 -0.5 0.6 -0.6 0.7 -0.7 0.8 -0.8 0.9 -0.9 1.0 -1.0 1.1 -1.1 1.2 -1.2 1.3 -1.3 1.4 -1.4 1.5 -1.5 1.6 -1.6
Press ENTER when done.

1. Touch with multimeter/DC voltmeter each pair of pins from bottom to top (left pins are ground)
2. Check that respective pins have voltages as described by artiq_sinara_test
3. If there are BNC/SMA-IDC adapters, also check their voltages - they should be the same
4. Check LEDs are on