515 B
515 B
Kasli_SOC
HW Setup
Check the BOOT mode switches - they both should be at SD if the Kasli-SoC going to be shipped to customer. POR jumper needs only for JTAG mode.
Mounting fan onto heatsink
- ⚠️ Verify the fan has the correct polarity
- Place the fan on a heatsink
- Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws)
- Replace the tapping screws with M2.5x14mm screws
- Verify the fan is secure