Kasli_SOC

HW Setup

Check the BOOT mode switches - they both should be at SD if the Kasli-SoC going to be shipped to customer. POR jumper needs only for JTAG mode.

⚠️ Verify the fan has the correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)
Place the fan on a heatsink
Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws)
Replace the tapping screws with M2.5x14mm screws
Verify the fan is secure