forked from sinara-hw/datasheets
occheung
3654502d1b
Also remove propagation delay specs from LVDS-TTL. PCB traces would make a significant impact.
642 lines
29 KiB
TeX
642 lines
29 KiB
TeX
\documentclass[10pt]{datasheet}
|
|
\usepackage{palatino}
|
|
\usepackage{textgreek}
|
|
\usepackage{minted}
|
|
\usepackage{tcolorbox}
|
|
\usepackage{etoolbox}
|
|
\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}%
|
|
\AfterEndEnvironment{minted}{\end{tcolorbox}}%
|
|
|
|
\usepackage[justification=centering]{caption}
|
|
|
|
\usepackage[utf8]{inputenc}
|
|
\usepackage[english]{babel}
|
|
\usepackage[english]{isodate}
|
|
|
|
\usepackage{graphicx}
|
|
\usepackage{subfig}
|
|
|
|
\usepackage{tikz}
|
|
\usepackage{pgfplots}
|
|
\usepackage{circuitikz}
|
|
\usetikzlibrary{calc}
|
|
\usetikzlibrary{fit,backgrounds}
|
|
|
|
\title{2238 MCX-TTL}
|
|
\author{M-Labs Limited}
|
|
\date{January 2022}
|
|
\revision{Revision 1}
|
|
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
|
|
|
|
\begin{document}
|
|
\maketitle
|
|
|
|
\section{Features}
|
|
|
|
\begin{itemize}
|
|
\item{16 channels.}
|
|
\item{Input and output capable.}
|
|
\item{No galvanic isolation.}
|
|
\item{High speed and low jitter.}
|
|
\item{MCX connectors.}
|
|
\end{itemize}
|
|
|
|
\section{Applications}
|
|
|
|
\begin{itemize}
|
|
\item{Photon counting.}
|
|
\item{External equipment trigger.}
|
|
\item{Optical shutter control.}
|
|
\end{itemize}
|
|
|
|
\section{General Description}
|
|
The 2238 MCX-TTL card is a 4hp EEM module.
|
|
It adds general-purpose digital I/O capabilities to carrier cards such as 1124 Kasli and 1125 Kasli-SoC.
|
|
|
|
Each card provides four banks of four digital channels each, with MCX connectors, controlled through 2 EEM connectors.
|
|
Each EEM connector controls two banks independently.
|
|
Single EEM operation is possible.
|
|
The direction (input or output) of each bank can be selected using DIP switches.
|
|
Each channel supports 50\textOmega~terminations individually controllable using DIP switches.
|
|
This card can achieve higher speed and lower jitter than the isolated 2118/2128 BNC/SMA-TTL cards.
|
|
|
|
% Switch to next column
|
|
\vfill\break
|
|
|
|
\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}}
|
|
\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}}
|
|
|
|
\begin{figure}[h]
|
|
\centering
|
|
\scalebox{0.88}{
|
|
\begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]
|
|
% Node to pin-point the locations of MCX symbols
|
|
\draw[color=white, text=black] (-0.1, 0.7) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx0) {};
|
|
\draw[color=white, text=black] (-0.1, 0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx1) {};
|
|
\draw[color=white, text=black] (-0.1, 0) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx2) {};
|
|
\draw[color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx3) {};
|
|
\draw[color=white, text=black] (-0.1, -1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx4) {};
|
|
\draw[color=white, text=black] (-0.1, -1.4) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx5) {};
|
|
\draw[color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx6) {};
|
|
\draw[color=white, text=black] (-0.1, -2.1) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx7) {};
|
|
\draw[color=white, text=black] (-0.1, -4.2) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx8) {};
|
|
\draw[color=white, text=black] (-0.1, -4.55) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx9) {};
|
|
\draw[color=white, text=black] (-0.1, -4.9) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx10) {};
|
|
\draw[color=white, text=black] (-0.1, -5.25) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx11) {};
|
|
\draw[color=white, text=black] (-0.1, -5.95) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx12) {};
|
|
\draw[color=white, text=black] (-0.1, -6.3) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx13) {};
|
|
\draw[color=white, text=black] (-0.1, -6.65) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx14) {};
|
|
\draw[color=white, text=black] (-0.1, -7) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (mcx15) {};
|
|
|
|
% Labels for IO 0-15
|
|
\node [label=left:\tiny{IO 0}] at (0.35, 0.7) {};
|
|
\node [label=left:\tiny{IO 1}] at (0.35, 0.35) {};
|
|
\node [label=left:\tiny{IO 2}] at (0.35, 0) {};
|
|
\node [label=left:\tiny{IO 3}] at (0.35, -0.35) {};
|
|
\node [label=left:\tiny{IO 4}] at (0.35, -1.05) {};
|
|
\node [label=left:\tiny{IO 5}] at (0.35, -1.4) {};
|
|
\node [label=left:\tiny{IO 6}] at (0.35, -1.75) {};
|
|
\node [label=left:\tiny{IO 7}] at (0.35, -2.1) {};
|
|
\node [label=left:\tiny{IO 8}] at (0.35, -4.2) {};
|
|
\node [label=left:\tiny{IO 9}] at (0.35, -4.55) {};
|
|
\node [label=left:\tiny{IO 10}] at (0.35, -4.9) {};
|
|
\node [label=left:\tiny{IO 11}] at (0.35, -5.25) {};
|
|
\node [label=left:\tiny{IO 12}] at (0.35, -5.95) {};
|
|
\node [label=left:\tiny{IO 13}] at (0.35, -6.3) {};
|
|
\node [label=left:\tiny{IO 14}] at (0.35, -6.65) {};
|
|
\node [label=left:\tiny{IO 15}] at (0.35, -7) {};
|
|
|
|
% Draw all female MCX connectors
|
|
% Bank 1
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=-10cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=-5cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=0cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
|
|
% Bank 2
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=15cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=20cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=30cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
|
|
% Bank 3
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=60cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=65cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=70cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=75cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
|
|
% Bank 4
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=85cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=90cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=95cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
\begin{scope}[scale=0.07 , rotate=-90, xshift=100cm, yshift=2cm]
|
|
\draw (0,0.65) -- (0,3);
|
|
\clip (-1.5,0) rectangle (1.5,1.5);
|
|
\draw (0,0) circle(1.5);
|
|
\clip (-0.8,0) rectangle (0.8,0.8);
|
|
\draw (0,0) circle(0.8);
|
|
\end{scope}
|
|
|
|
% Draw bank boundaries
|
|
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx0)(mcx3)] (bank0) {};
|
|
\node[fill=white, scale=0.7, rotate=-90] at (bank0.west) {Bank 0};
|
|
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx4)(mcx7)] (bank1) {};
|
|
\node[fill=white, scale=0.7, rotate=-90] at (bank1.west) {Bank 1};
|
|
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx8)(mcx11)] (bank2) {};
|
|
\node[fill=white, scale=0.7, rotate=-90] at (bank2.west) {Bank 2};
|
|
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.2em, fit=(mcx12)(mcx15)] (bank3) {};
|
|
\node[fill=white, scale=0.7, rotate=-90] at (bank3.west) {Bank 3};
|
|
|
|
% Draw bus transceivers
|
|
\draw (3.25, -0.7) node[twoportshape,t=\MymyLabel{2x 16-bits Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus0) {};
|
|
\draw (3.25, -5.6) node[twoportshape,t=\MymyLabel{2x 16-bits Bus}{Transceivers}, circuitikz/bipoles/twoport/width=3.2, scale=0.7, rotate=-90 ] (bus1) {};
|
|
|
|
% Draw termination switches
|
|
% Bus transceiver 0
|
|
\draw (1.7, 1.2) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch0) {};
|
|
\begin{scope}[xshift=1.8cm, yshift=1.23cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.9cm, yshift=1.23cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=2.0cm, yshift=1.23cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=2.1cm, yshift=1.23cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
|
|
% Bus transceiver 1
|
|
\draw (1.5, -2.6) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch1) {};
|
|
\begin{scope}[xshift=1.6cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.7cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.8cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.9cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
|
|
% Bus transceiver 2
|
|
\draw (1.7, -3.7) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch2) {};
|
|
\begin{scope}[xshift=1.8cm, yshift=-3.67cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.9cm, yshift=-3.67cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=2cm, yshift=-3.67cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=2.1cm, yshift=-3.67cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
|
|
% Bus transceiver 3
|
|
\draw (1.5, -7.5) node[twoportshape,t=\MymyLabel{High-Z/50\textOmega}{Switch \phantom{ssssss} }, circuitikz/bipoles/twoport/width=2, scale=0.4] (termswitch3) {};
|
|
\begin{scope}[xshift=1.6cm, yshift=-7.47cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.7cm, yshift=-7.47cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.8cm, yshift=-7.47cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=1.9cm, yshift=-7.47cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
|
|
% Connection termination switches to each IO line
|
|
% IO 0, 2, 4, 6
|
|
\draw [-] (1.4, 1) -- (1.4, 0.7);
|
|
\draw [-] (1.6, 1) -- (1.6, 0);
|
|
\draw [-] (1.8, 1) -- (1.8, -1.05);
|
|
\draw [-] (2, 1) -- (2, -1.75);
|
|
|
|
% IO 1, 3, 5, 7
|
|
\draw [-] (1.2, -2.4) -- (1.2, 0.35);
|
|
\draw [-] (1.4, -2.4) -- (1.4, -0.35);
|
|
\draw [-] (1.6, -2.4) -- (1.6, -1.4);
|
|
\draw [-] (1.8, -2.4) -- (1.8, -2.1);
|
|
|
|
% IO 8, 10, 12, 14
|
|
\draw [-] (1.4, -3.9) -- (1.4, -4.2);
|
|
\draw [-] (1.6, -3.9) -- (1.6, -4.9);
|
|
\draw [-] (1.8, -3.9) -- (1.8, -5.95);
|
|
\draw [-] (2, -3.9) -- (2, -6.65);
|
|
|
|
% IO 9, 11, 13, 15
|
|
\draw [-] (1.2, -7.3) -- (1.2, -4.55);
|
|
\draw [-] (1.4, -7.3) -- (1.4, -5.25);
|
|
\draw [-] (1.6, -7.3) -- (1.6, -6.3);
|
|
\draw [-] (1.8, -7.3) -- (1.8, -7);
|
|
|
|
% Connect I/Os to corresponding tranceivers
|
|
\draw [latexslim-latexslim] (mcx0) -- (2.9, 0.7);
|
|
\draw [latexslim-latexslim] (mcx1) -- (2.9, 0.35);
|
|
\draw [latexslim-latexslim] (mcx2) -- (2.9, 0);
|
|
\draw [latexslim-latexslim] (mcx3) -- (2.9, -0.35);
|
|
|
|
\draw [latexslim-latexslim] (mcx4) -- (2.9, -1.05);
|
|
\draw [latexslim-latexslim] (mcx5) -- (2.9, -1.4);
|
|
\draw [latexslim-latexslim] (mcx6) -- (2.9, -1.75);
|
|
\draw [latexslim-latexslim] (mcx7) -- (2.9, -2.1);
|
|
|
|
\draw [latexslim-latexslim] (mcx8) -- (2.9, -4.2);
|
|
\draw [latexslim-latexslim] (mcx9) -- (2.9, -4.55);
|
|
\draw [latexslim-latexslim] (mcx10) -- (2.9, -4.9);
|
|
\draw [latexslim-latexslim] (mcx11) -- (2.9, -5.25);
|
|
|
|
\draw [latexslim-latexslim] (mcx12) -- (2.9, -5.95);
|
|
\draw [latexslim-latexslim] (mcx13) -- (2.9, -6.3);
|
|
\draw [latexslim-latexslim] (mcx14) -- (2.9, -6.65);
|
|
\draw [latexslim-latexslim] (mcx15) -- (2.9, -7);
|
|
|
|
% Draw LVDS transceivers
|
|
\draw (5.05, -0.025) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds0) {};
|
|
\draw (5.05, -1.675) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds1) {};
|
|
\draw (5.05, -4.625) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds2) {};
|
|
\draw (5.05, -6.275) node[twoportshape,t={\MymyLabel{LVDS}{Transceiver}}, circuitikz/bipoles/twoport/width=2, scale=0.5, rotate=-90 ] (lvds3) {};
|
|
|
|
% Aesthetic EEPROM at each end of LVDS transceivers
|
|
\draw (5.05, 1.1) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (eeprom0) {};
|
|
\draw (5.05, -7.4) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (eeprom1) {};
|
|
|
|
% I/O expander
|
|
\draw (6.65, -3.5) node[twoportshape,t=\MymyLabel{IO Expander}{for I2C Bus}, circuitikz/bipoles/twoport/width=1.8, scale=0.5] (i2c) {};
|
|
|
|
% I/O direction switches
|
|
\draw (5.05, -2.8) node[twoportshape,t=\MymyLabel{Per-bank \phantom{space} }{Input/Output Switch}, circuitikz/bipoles/twoport/width=2.7, scale=0.44] (ioswitch) {};
|
|
\begin{scope}[xshift=5.3cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=5.4cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=5.5cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
\begin{scope}[xshift=5.6cm, yshift=-2.57cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
|
\draw (0.4,0) to[short,-o](0.75,0);
|
|
\draw (0.78,0)-- +(30:0.46);
|
|
\draw (1.25,0)to[short,o-](1.6,0) ;
|
|
\end{scope}
|
|
|
|
% EEM Ports
|
|
\draw (6.65, -0.5) node[twoportshape, t={EEM Port 0}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem0) {};
|
|
\draw (6.65, -5.8) node[twoportshape, t={EEM Port 1}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem1) {};
|
|
|
|
% Connect I/O expander & direction switches to bus transceivers block
|
|
% The transceivers had been grouped up, there is no need to label I/O direction indices anymore
|
|
% It might still be useful to identify the direction line itself, though
|
|
\draw [latexslim-] (i2c.west) -- (3.25, -3.5);
|
|
\draw [-] (ioswitch.south) -- (5.05, -3.5);
|
|
\draw [latexslim-latexslim] (bus0.east) -- (bus1.west);
|
|
\node [label=center:\tiny{IO Direction}] at (4.1, -3.4) {};
|
|
|
|
% Connect LVDS transceivers to bus transceivers, with labelling
|
|
\draw [latexslim-latexslim] (lvds0.south) -- (3.6, -0.025);
|
|
\node [label=center:\tiny{EEM}] at (4.2, 0.075) {};
|
|
\node [label=center:\tiny{0..3}] at (4.2, -0.125) {};
|
|
\draw [latexslim-latexslim] (lvds1.south) -- (3.6, -1.675);
|
|
\node [label=center:\tiny{EEM}] at (4.2, -1.575) {};
|
|
\node [label=center:\tiny{4..7}] at (4.2, -1.775) {};
|
|
\draw [latexslim-latexslim] (lvds2.south) -- (3.6, -4.625);
|
|
\node [label=center:\tiny{EEM}] at (4.2, -4.525) {};
|
|
\node [label=center:\tiny{8..11}] at (4.2, -4.725) {};
|
|
\draw [latexslim-latexslim] (lvds3.south) -- (3.6, -6.275);
|
|
\node [label=center:\tiny{EEM}] at (4.2, -6.175) {};
|
|
\node [label=center:\tiny{12..15}] at (4.2, -6.375) {};
|
|
|
|
% Connect EEM0 & EEM1
|
|
\draw [latexslim-latexslim] (lvds0.north) -- (6.3, -0.025);
|
|
\draw [latexslim-latexslim] (lvds1.north) -- (6.3, -1.675);
|
|
\draw [latexslim-latexslim] (lvds2.north) -- (6.3, -4.625);
|
|
\draw [latexslim-latexslim] (lvds3.north) -- (6.3, -6.275);
|
|
\draw [latexslim-latexslim] (eeprom0.east) -- (6.3, 1.1);
|
|
\draw [latexslim-latexslim] (eeprom1.east) -- (6.3, -7.4);
|
|
\draw [latexslim-latexslim] (eem0.east) -- (i2c.north);
|
|
|
|
% Reminder: IO directions are only selectable by bank. Channels from the same bank must have the same IO direction.
|
|
% Might be unnecessary as I/O directions signals are labelled with the "Bank" prefix.
|
|
\node [label={center:\tiny{Channels from the same bank}}] at (1.4, -3.05) {};
|
|
\node [label={center:\tiny{must have the same IO direction.}}] at (1.4, -3.25) {};
|
|
|
|
\end{circuitikz}
|
|
}
|
|
|
|
\caption{Simplified Block Diagram}
|
|
\end{figure}
|
|
|
|
\begin{figure}[hbt!]
|
|
\centering
|
|
\includegraphics[width=3.6in]{photo2238.jpg}
|
|
\caption{MCX-TTL Card photo}
|
|
\end{figure}
|
|
|
|
% For wide tables, a single column layout is better. It can be switched
|
|
% page-by-page.
|
|
\onecolumn
|
|
|
|
\section{Electrical Specifications}
|
|
|
|
Both recommended operating conditions and electrical characteristics are based on the datasheet of the bus transceivers IC (74LVT162245MTD).
|
|
|
|
\begin{table}[h]
|
|
\begin{threeparttable}
|
|
\caption{Recommended Operating Conditions}
|
|
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
|
\thickhline
|
|
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
|
\textbf{Unit} & \textbf{Conditions} \\
|
|
\hline
|
|
Input voltage & $V_{I}$ & 0 & & 5.5 & V \\
|
|
\hline
|
|
High-level output current & $I_{OH}$ & & & -24 & mA \\
|
|
\hline
|
|
Low-level output current & $I_{OL}$ & & & 24 & mA \\
|
|
\hline
|
|
Input edge rate & $\frac{\Delta t}{\Delta V}$ & 0 & & 10 & ns/V & $0.8V \leq V_I \leq 2.0V$ \\
|
|
\thickhline
|
|
\end{tabularx}
|
|
\end{threeparttable}
|
|
\end{table}
|
|
The recommended operating temperature is $-40\degree C \leq T_A \leq 85\degree C$.
|
|
All specifications are in the recommended operating temperature range unless otherwise noted.
|
|
|
|
\begin{table}[h]
|
|
\begin{threeparttable}
|
|
\caption{Electrical Characteristics}
|
|
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
|
\thickhline
|
|
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
|
\textbf{Unit} & \textbf{Conditions} \\
|
|
\hline
|
|
Input clamp diode voltage & $V_{IK}$ & & & -1.2 & V & $I_I =-36 mA$ \\
|
|
\hline
|
|
Input high voltage & $V_{IH}$ & 2.0 & & & V & \\
|
|
\hline
|
|
Input low voltage & $V_{IL}$ & & & 0.8 & V & \\
|
|
\hline
|
|
Output high voltage & $V_{OH}$ & 2.0 & & & V & $I_{OH}=-24mA$ \\
|
|
& & 3.1 & & & V & $I_{OH}=-200\mu A$ \\
|
|
\hline
|
|
Output low voltage & $V_{OL}$ & & & 0.8 & V & $I_{OL}=-24mA$ \\
|
|
& & & & 0.2 & V & $I_{OL}=-200\mu A$ \\
|
|
\hline
|
|
Input current & $I_I$ & & & 20 & \textmu A & $V_I=5.5V$ \\
|
|
& & & & 2 & \textmu A & $V_I=3.3V$ \\
|
|
& & & & -10 & \textmu A & $V_I=0V$ \\
|
|
\thickhline
|
|
\end{tabularx}
|
|
\end{threeparttable}
|
|
\end{table}
|
|
|
|
\section{Configuring IO Direction \& Termination}
|
|
The termination and IO direction can be configured by switches.
|
|
The per-channel termination and per-bank IO direction switches are found at the top and middle of the card respectively.
|
|
\begin{multicols}{2}
|
|
Termination switches selects the termination of each channel, between high impedence (OFF) and 50\textOmega~(ON).
|
|
|
|
IO direction switches partly decides the IO direction of each bank.
|
|
\begin{itemize}
|
|
\itemsep0em
|
|
\item Closed switch (ON) \\
|
|
Fix the corresponding bank to output. The direction cannot be changed by I\textsuperscript{2}C.
|
|
\item Opened switch (OFF) \\
|
|
Leave the direction configurable by I\textsuperscript{2}C.
|
|
\end{itemize}
|
|
\columnbreak
|
|
\begin{center}
|
|
\centering
|
|
\includegraphics[height=1.7in]{mcx_ttl_switches.jpg}
|
|
\captionof{figure}{Position of switches}
|
|
\end{center}
|
|
\end{multicols}
|
|
|
|
\newpage
|
|
\section{Example ARTIQ code}
|
|
The sections below demonstrate simple usage scenarios of the 2245 LVDS-TTL card with the ARTIQ control system.
|
|
They do not exhaustively demonstrate all the features of the ARTIQ system.
|
|
The full documentation for the ARTIQ software and gateware is available at \url{https://m-labs.hk}.
|
|
|
|
Timing accuracy in the examples below is well under 1 nanosecond thanks to the ARTIQ RTIO system.
|
|
|
|
\subsection{One pulse per second}
|
|
The channel should be configured as output in both the gateware and hardware.
|
|
|
|
\begin{minted}{python}
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
while True:
|
|
self.ttl0.pulse(500*ms)
|
|
delay(500*ms)
|
|
\end{minted}
|
|
|
|
\subsection{Morse code}
|
|
This example demonstrates some basic algorithmic features of the ARTIQ-Python language.
|
|
\begin{minted}{python}
|
|
def prepare(self):
|
|
# As of ARTIQ-6, the ARTIQ compiler has limited string handling
|
|
# capabilities, so we pass a list of integers instead.
|
|
message = ".- .-. - .. --.-"
|
|
self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message]
|
|
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
for cmd in self.commands:
|
|
if cmd == 1:
|
|
self.led.pulse(100*ms)
|
|
delay(100*ms)
|
|
if cmd == 2:
|
|
self.led.pulse(300*ms)
|
|
delay(100*ms)
|
|
if cmd == 3:
|
|
delay(700*ms)
|
|
\end{minted}
|
|
|
|
\newpage
|
|
\subsection{Counting rising edges in a 1ms window}
|
|
The channel should be configured as input in both the gateware and hardware.
|
|
|
|
\begin{minted}{python}
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
gate_end_mu = self.ttl0.gate_rising(1*ms)
|
|
counts = self.ttl0.count()
|
|
print(counts)
|
|
\end{minted}
|
|
|
|
This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second.
|
|
If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second:
|
|
\begin{minted}{python}
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
self.edgecounter0.gate_rising(1*ms)
|
|
counts = self.edgecounter0.fetch_count()
|
|
print(counts)
|
|
\end{minted}
|
|
|
|
\subsection{Responding to an external trigger}
|
|
One channel needs to be configured as input, and the other as output.
|
|
|
|
\begin{minted}{python}
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
self.ttlin.gate_rising(5*ms)
|
|
timestamp_mu = self.ttlin.timestamp_mu()
|
|
at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms))
|
|
self.ttlout.pulse(1*us)
|
|
\end{minted}
|
|
|
|
\section{Ordering Information}
|
|
To order, please visit \url{https://m-labs.hk} and select the 2238 MCX-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}.
|
|
|
|
\section*{}
|
|
\vspace*{\fill}
|
|
|
|
\begin{footnotesize}
|
|
Information furnished by M-Labs Limited is provided in good faith in the hope that it will be useful. However, no responsibility is assumed by M-Labs Limited for its use. Specifications may be subject to change without notice.
|
|
\end{footnotesize}
|
|
|
|
\end{document}
|