2022-06-08 17:22:55 +08:00
\documentclass [10pt] { datasheet}
\usepackage { palatino}
\usepackage { textgreek}
\usepackage { minted}
\usepackage { tcolorbox}
\usepackage { etoolbox}
\usepackage [justification=centering] { caption}
\usepackage [utf8] { inputenc}
\usepackage [english] { babel}
\usepackage [english] { isodate}
\usepackage { graphicx}
\usepackage { subfig}
\usepackage { tikz}
\usepackage { pgfplots}
\usepackage { circuitikz}
\usepackage { pifont}
\usetikzlibrary { calc}
\usetikzlibrary { fit,backgrounds}
\title { 5518 BNC-IDC / 5528 SMA-IDC}
\author { M-Labs Limited}
\date { January 2022}
\revision { Revision 1}
\companylogo { \includegraphics [height=0.73in] { artiq_ sinara.pdf} }
\begin { document}
\maketitle
\section { Features}
\begin { itemize}
\item { 8 channels.}
\item { Internal IDC connector.}
\item { External BNC or SMA connectors.}
\end { itemize}
\section { Applications}
\begin { itemize}
\item { Breaks out analog signals.}
\item { BNC or SMA adapters for: \begin { itemize}
\item { 5432 DAC Zotino}
\item { 5632 DAC Fastino}
\end { itemize} }
\item { (5528 only) SMA adapter for 5108 Sampler.}
\item { Convert from/to HD68 with 5568 HD68-IDC.}
\end { itemize}
\section { General Description}
The 5518 BNC-IDC card is a 8hp EEM module, while the 5528 SMA-IDC card is a 4hp EEM module.
2022-06-17 16:12:27 +08:00
Both adapter cards break out analog signal from IDC connectors to BNC (5518) or SMA (5528).
2022-06-08 17:22:55 +08:00
IDC connectors can be found on 5108 Sampler, 5432 DAC Zotino, 5632 DAC Fastino \& 5568 HD68-IDC.
Each card provides 8 channels, with BNC (5518) or SMA (5528) connectors.
Breaking out all 32 channels from 5432 DAC Zotino, 5632 DAC Fastino or 5568 HD68-IDC requires 4 BNC/SMA-IDC cards.
Only 1 BNC/SMA-IDC is required to break out all 8 ADC channels from a 5108 Sampler.
% Switch to next column
\vfill \break
\newcommand * { \MyLabel } [3][2cm]{ \parbox { #1} { \centering #2 \\ #3} }
\newcommand * { \MymyLabel } [3][4cm]{ \parbox { #1} { \centering #2 \\ #3} }
\newcommand { \repeatfootnote } [1]{ \textsuperscript { \ref { #1} } }
\newcommand { \inputcolorboxminted } [2]{ %
\begin { tcolorbox} [colback=white]
\inputminted [#1, gobble=4] { python} { #2}
\end { tcolorbox}
}
\begin { figure} [h]
\centering
\scalebox { 0.95} {
\begin { circuitikz} [european, scale=1.2, every label/.append style={ align=center} ]
\begin { scope} []
% Node to pin-point the locations of IO symbols
\draw [color=white, text=black] (-0.1, 2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io0) { } ;
\draw [color=white, text=black] (-0.1, 1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io1) { } ;
\draw [color=white, text=black] (-0.1, 1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io2) { } ;
\draw [color=white, text=black] (-0.1, 0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io3) { } ;
\draw [color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io4) { } ;
\draw [color=white, text=black] (-0.1, -1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io5) { } ;
\draw [color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io6) { } ;
\draw [color=white, text=black] (-0.1, -2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io7) { } ;
% Labels for all IO symbols
\node [label=left:\tiny { IO 0} ] at (0.25, 2.45) { } ;
\node [label=left:\tiny { IO 1} ] at (0.25, 1.75) { } ;
\node [label=left:\tiny { IO 2} ] at (0.25, 1.05) { } ;
\node [label=left:\tiny { IO 3} ] at (0.25, 0.35) { } ;
\node [label=left:\tiny { IO 4} ] at (0.25, -0.35) { } ;
\node [label=left:\tiny { IO 5} ] at (0.25, -1.05) { } ;
\node [label=left:\tiny { IO 6} ] at (0.25, -1.75) { } ;
\node [label=left:\tiny { IO 7} ] at (0.25, -2.45) { } ;
% draw all IO symbols
\begin { scope} [scale=0.07 , rotate=-90, xshift=35cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=15cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=-5cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=-15cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=-25cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
\begin { scope} [scale=0.07 , rotate=-90, xshift=-35cm, yshift=2cm]
\draw (0,0.65) -- (0,3);
\clip (-1.5,0) rectangle (1.5,1.5);
\draw (0,0) circle(1.5);
\clip (-0.8,0) rectangle (0.8,0.8);
\draw (0,0) circle(0.8);
\end { scope}
% Draw CH0, CH1 & CH7 CM chokes
\draw (3, 1.2) node[twoportshape, t=\MymyLabel { Common Mode} { Line Filter} , circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm0) { } ;
\draw (3, 0.4) node[twoportshape, t=\MymyLabel { Common Mode} { Line Filter} , circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm1) { } ;
\draw (3, -1.1) node[twoportshape, t=\MymyLabel { Common Mode} { Line Filter} , circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm7) { } ;
% Omission dots for other channels
\node at (3, -0.15)[circle,fill,inner sep=0.7pt]{ } ;
\node at (3, -0.35)[circle,fill,inner sep=0.7pt]{ } ;
\node at (3, -0.55)[circle,fill,inner sep=0.7pt]{ } ;
% IDC26 connector
\draw (5.13, 0) node[twoportshape, t={ IDC Port} , circuitikz/bipoles/twoport/width=3.8, scale=0.7, rotate=-90] (idc) { } ;
% Connect IO connectors to CM chokes
\draw [latexslim-latexslim] (io0.east) -- (1.3, 2.45) -- (1.3, 1.2) -- (cm0.west);
\draw [latexslim-latexslim] (io1.east) -- (1.2, 1.75) -- (1.2, 0.4) -- (cm1.west);
\draw [latexslim-latexslim] (io2.east) -- (1.1, 1.05) -- (1.1, -0.15) -- (2.5, -0.15);
\draw [latexslim-latexslim] (io3.east) -- (1.0, 0.35) -- (1.0, -0.25) -- (2.5, -0.25);
\draw [latexslim-latexslim] (io4.east) -- (1.0, -0.35) -- (1.0, -0.35) -- (2.5, -0.35);
\draw [latexslim-latexslim] (io5.east) -- (1.1, -1.05) -- (1.1, -0.45) -- (2.5, -0.45);
\draw [latexslim-latexslim] (io6.east) -- (1.2, -1.75) -- (1.2, -0.55) -- (2.5, -0.55);
\draw [latexslim-latexslim] (io7.east) -- (1.3, -2.45) -- (1.3, -1.1) -- (cm7.west);
% Connect CM chokes to the IDC connector
\draw [latexslim-latexslim] (cm0.east) -- (4.85, 1.2);
\draw [latexslim-latexslim] (cm1.east) -- (4.85, 0.4);
\draw [latexslim-latexslim] (3.5, -0.15) -- ++(1.35, 0);
\draw [latexslim-latexslim] (3.5, -0.25) -- ++(1.35, 0);
\draw [latexslim-latexslim] (3.5, -0.35) -- ++(1.35, 0);
\draw [latexslim-latexslim] (3.5, -0.45) -- ++(1.35, 0);
\draw [latexslim-latexslim] (3.5, -0.55) -- ++(1.35, 0);
\draw [latexslim-latexslim] (cm7.east) -- (4.85, -1.1);
\end { scope}
\end { circuitikz}
}
\caption { Simplified Block Diagram}
\end { figure}
\begin { figure} [hbt!]
\centering
\subfloat [\centering BNC-IDC] { {
\includegraphics [height=2.5in] { BNC_ IDC_ FP.jpg}
\includegraphics [height=2.5in] { photo5518.jpg}
} } %
\subfloat [\centering SMA-IDC] { {
\quad
\includegraphics [height=2.5in] { SMA_ IDC_ FP.pdf}
\quad
} } %
\caption { BNC-IDC/SMA-IDC Card photos} %
\label { fig:example} %
\end { figure}
% For wide tables, a single column layout is better. It can be switched
% page-by-page.
\onecolumn
\section { Electrical Specifications}
Specifications of parameters are based on the datasheet of the
common mode line filter\footnote { \label { cm_ choke} https://www.we-online.com/catalog/datasheet/744229.pdf} .
\begin { table} [h]
\centering
\begin { threeparttable}
\caption { Electrical Specifications}
\begin { tabularx} { 0.65\textwidth } { l | c | c | c | X}
\thickhline
\textbf { Parameter} & \textbf { Symbol} & \textbf { Max. Value} & \textbf { Unit} & \textbf { Conditions} \\
\hline
Rated voltage & $ V _ { R } $ & 80 & V & \\
\hline
Rated current & $ I _ { R } $ & 400 & mA & $ \Delta T ^ { * } = 40 K $ \\
\thickhline
\end { tabularx}
*$ \Delta T $ refers to the temperature of the CM line filter minus the ambient.
\end { threeparttable}
\end { table}
Impedance characteristics of common mode \& differential mode signal at different frequencies are shown in the following graph.
\begin { figure} [H]
\centering
\includegraphics [] { idc_ cm_ choke.pdf}
\caption { Common Mode Line Filter Impedance Characteristics}
\end { figure}
\newpage
\section { Channel Mapping}
The following table shows the corresponding channel number of the BNC/SMA-IDC adapter IO ports, when it is connected to Sinara cards that support IDC connections.
\begin { table} [h]
\caption { Channel Mapping of BNC/SMA-IDC to Zotino, Fastino \& HD68-IDC}
\centering
\begin { tabular} { |c|c|c|c|c|c|c|c|c|}
\hline
IDC Port Label & \multicolumn { 1} { l|} { IO 0} & \multicolumn { 1} { l|} { IO 1} & \multicolumn { 1} { l|} { IO 2} & \multicolumn { 1} { l|} { IO 3} & \multicolumn { 1} { l|} { IO 4} & \multicolumn { 1} { l|} { IO 5} & \multicolumn { 1} { l|} { IO 6} & \multicolumn { 1} { l|} { IO 7} \\ \hline
CH 0-7 & 0 & 1 & 2 & 3 & 4 & 5 & 6 & 7 \\ \hline
CH 8-15 & 8 & 9 & 10 & 11 & 12 & 13 & 14 & 15 \\ \hline
CH 16-23 & 16 & 17 & 18 & 19 & 20 & 21 & 22 & 23 \\ \hline
CH 24-31 & 24 & 25 & 26 & 27 & 28 & 29 & 30 & 31 \\ \hline
\end { tabular}
\end { table}
\begin { table} [h]
\caption { Channel Mapping of BNC/SMA-IDC to 5108 Sampler}
\centering
\begin { tabular} { |l|l|l|l|l|l|l|l|l|}
\hline
& IO 0 & IO 1 & IO 2 & IO 3 & IO 4 & IO 5 & IO 6 & IO 7 \\ \hline
Sampler Ch. & \multicolumn { 1} { c|} { 7} & \multicolumn { 1} { c|} { 6} & \multicolumn { 1} { c|} { 5} & \multicolumn { 1} { c|} { 4} & \multicolumn { 1} { c|} { 3} & \multicolumn { 1} { c|} { 2} & \multicolumn { 1} { c|} { 1} & \multicolumn { 1} { c|} { 0} \\ \hline
\end { tabular}
\end { table}
\section { Front Panel Drawings}
\begin { multicols} { 2}
\begin { center}
\centering
\includegraphics [height=2.7in] { bnc_ idc_ drawings.pdf}
\captionof { figure} { 5518 BNC-IDC front panel drawings}
\end { center}
\begin { center}
\captionof { table} { Bill of Material (5518 Standalone)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90506946 & 1 & FP-FRONT PANEL, EXTRUDED, TYPE 2, STATIC, 3Ux8HP \\ \hline
2 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline
3 & 3020716 & 0.04 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline
\end { tabular}
\end { center}
\columnbreak
\begin { center}
\centering
\includegraphics [height=2.7in] { bnc_ idc_ assembly.pdf}
\captionof { figure} { 5518 BNC-IDC front panel assembly}
\end { center}
\begin { center}
\captionof { table} { Bill of Material (5518 Assembled)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90506946 & 1 & FP-LYKJ 3U8HP PANEL \\ \hline
2 & 3033098 & 0.04 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline
3 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline
4 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline
5 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline
6 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline
7 & 3040005 & 1 & HANDLE 8HP GREY PLASTIC \\ \hline
8 & 3207076 & 0.01 & SCR M2.5*16 PAN 100 21101-222 \\ \hline
9 & 3201130 & 0.01 & NUT M2.5 HEX ST NI KIT (100PCS) \\ \hline
10 & 3211232 & 1 & SCR M2.5*14 PAN PHL SS \\ \hline
11 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline
\end { tabular}
\end { center}
\end { multicols}
\begin { multicols} { 2}
\begin { center}
\centering
\includegraphics [height=3in] { sma_ idc_ drawings.pdf}
\captionof { figure} { 5528 SMA-IDC front panel drawings}
\end { center}
\begin { center}
\captionof { table} { Bill of Material (5528 Standalone)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90506946 & 1 & FRONT PANEL 3U 4HP PIU TYPE2 \\ \hline
2 & 3020716 & 0.02 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline
3 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline
\end { tabular}
\end { center}
\columnbreak
\begin { center}
\centering
\includegraphics [height=3in] { sma_ idc_ assembly.pdf}
\captionof { figure} { 5528 SMA-IDC front panel assembly}
\end { center}
\begin { center}
\captionof { table} { Bill of Material (5528 Assembled)}
\tiny
\begin { tabular} { |c|c|c|c|}
\hline
Index & Part No. & Qty & Description \\ \hline
1 & 90506949 & 1 & FP-LYKJ 3U4HP PANEL \\ \hline
2 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline
3 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline
4 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline
5 & 3040012 & 1 & HANDLE 4HP GREY PLASTIC \\ \hline
6 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline
7 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline
8 & 3207075 & 0.01 & SCR M2.5*12 PAN 100 21101-221 \\ \hline
9 & 3033098 & 0.02 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline
\end { tabular}
\end { center}
\end { multicols}
\section { Ordering Information}
To order, please visit \url { https://m-labs.hk} and select the 5518 BNC-IDC/5528 SMA-IDC in the ARTIQ Sinara crate configuration tool.
The card may also be ordered separately by writing to \url { mailto:sales@m-labs.hk} .
\section * { }
\vspace * { \fill }
\begin { footnotesize}
Information furnished by M-Labs Limited is provided in good faith in the hope that it will be useful. However, no responsibility is assumed by M-Labs Limited for its use. Specifications may be subject to change without notice.
\end { footnotesize}
\end { document}
