492 lines
16 KiB
Python
492 lines
16 KiB
Python
from migen import *
|
|
from sync_serdes import *
|
|
from migen.genlib.fifo import SyncFIFO
|
|
from migen.build.platforms.sinara import kasli
|
|
from migen.genlib.misc import WaitTimer
|
|
from kasli_crg import TransceiverCRG
|
|
from eem_helpers import generate_pads
|
|
from uart import UART
|
|
from io_loopback import SingleIOLoopback
|
|
|
|
|
|
SEPARATOR = Constant(0b0101)
|
|
|
|
class SingleSerDesLoopBack(Module):
|
|
def __init__(self, io_pad, sys_clk_freq, debug):
|
|
self.uart_rx = Signal()
|
|
self.uart_tx = Signal()
|
|
|
|
self.submodules.uart = UART(round((115200/sys_clk_freq)*2**32))
|
|
self.comb += [
|
|
self.uart.phy_rx.eq(self.uart_rx),
|
|
self.uart_tx.eq(self.uart.phy_tx),
|
|
]
|
|
|
|
self.submodules.tx = SingleLineTX()
|
|
self.submodules.rx = SingleLineRX()
|
|
|
|
# Primary adjustment to master-slave bitslip
|
|
self.submodules.slave_aligner = SlaveAligner()
|
|
|
|
# Optimal delay solver
|
|
self.submodules.delay_solver = DelayOptimizer()
|
|
|
|
# Debugging readers
|
|
if debug:
|
|
self.submodules.bitslip_reader = BitSlipReader()
|
|
self.submodules.post_align_reader = BitSlipReader()
|
|
self.submodules.phase_reader = PhaseReader()
|
|
|
|
# The actual channel
|
|
self.submodules.channel = SingleIOLoopback(io_pad)
|
|
|
|
# Attach FIFO to UART TX, send rate is too slow w.r.t sysclk
|
|
self.submodules.tx_fifo = SyncFIFO(8, 64)
|
|
|
|
self.comb += [
|
|
# Repetitively send 0b00100
|
|
self.tx.txdata.eq(0b00100),
|
|
|
|
# Loopback channel
|
|
self.channel.i.eq(self.tx.ser_out),
|
|
self.rx.ser_in_no_dly.eq(self.channel.o),
|
|
self.channel.t.eq(self.tx.t_out),
|
|
|
|
# TX path
|
|
self.uart.tx_data.eq(self.tx_fifo.dout),
|
|
self.uart.tx_stb.eq(self.tx_fifo.readable),
|
|
self.tx_fifo.re.eq(self.uart.tx_ack),
|
|
]
|
|
|
|
# Route deserializer to phase_reader & the delay tap optimizer
|
|
self.comb += [
|
|
self.slave_aligner.start.eq(0),
|
|
self.delay_solver.start.eq(0),
|
|
|
|
# RXDATA for aligner & optimzer
|
|
self.slave_aligner.loopback_rxdata.eq(self.rx.rxdata),
|
|
self.delay_solver.loopback_rxdata.eq(self.rx.rxdata),
|
|
|
|
# Delay tap value
|
|
self.delay_solver.delay_tap.eq(self.rx.cnt_out),
|
|
|
|
# IDELAY delay tap control, such that phase_reader can
|
|
# change tap value after delay measurement
|
|
self.rx.ce.eq(self.delay_solver.inc_en),
|
|
self.rx.master_bitslip.eq(self.slave_aligner.master_bitslip),
|
|
self.rx.slave_bitslip.eq(self.slave_aligner.slave_bitslip),
|
|
self.rx.ld.eq(self.delay_solver.ld),
|
|
self.rx.cnt_in.eq(self.delay_solver.opt_delay_tap),
|
|
]
|
|
|
|
# Debugging logics
|
|
if debug:
|
|
self.comb += [
|
|
self.bitslip_reader.loopback_rxdata.eq(self.rx.rxdata),
|
|
self.post_align_reader.loopback_rxdata.eq(self.rx.rxdata),
|
|
self.phase_reader.loopback_rxdata.eq(self.rx.rxdata),
|
|
|
|
self.phase_reader.delay_tap.eq(self.rx.cnt_out),
|
|
|
|
self.rx.ce.eq(
|
|
self.phase_reader.inc_en |
|
|
self.delay_solver.inc_en
|
|
),
|
|
self.rx.master_bitslip.eq(
|
|
self.bitslip_reader.bitslip |
|
|
self.slave_aligner.master_bitslip |
|
|
self.post_align_reader.bitslip
|
|
),
|
|
self.rx.slave_bitslip.eq(
|
|
self.bitslip_reader.bitslip |
|
|
self.slave_aligner.slave_bitslip |
|
|
self.post_align_reader.bitslip
|
|
),
|
|
]
|
|
|
|
if debug:
|
|
delay_tap_count = Signal(6)
|
|
bitslip_count = Signal(3)
|
|
post_align_bitslip_count = Signal(3)
|
|
|
|
rx_intra_aligned = Signal()
|
|
select_odd = Signal()
|
|
rxdata_decimated = Signal(5)
|
|
rxdata_pulse_read = Signal(10)
|
|
|
|
self.comb += [
|
|
If(select_odd,
|
|
rxdata_decimated.eq(self.rx.rxdata[1::2]),
|
|
).Else(
|
|
rxdata_decimated.eq(self.rx.rxdata[::2]),
|
|
),
|
|
]
|
|
|
|
if not debug:
|
|
release_fsm = FSM(reset_state="WAIT_ALIGNER")
|
|
self.submodules += release_fsm
|
|
|
|
release_fsm.act("WAIT_ALIGNER",
|
|
self.slave_aligner.start.eq(1),
|
|
If(self.slave_aligner.done,
|
|
NextState("WAIT_DELAY_OPT"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("WAIT_DELAY_OPT",
|
|
self.delay_solver.start.eq(1),
|
|
If(self.delay_solver.done,
|
|
NextValue(select_odd, self.delay_solver.select_odd),
|
|
NextState("INTRA_ALIGN_DONE"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("INTRA_ALIGN_DONE",
|
|
rx_intra_aligned.eq(1),
|
|
NextState("WAIT_TX_ZERO"),
|
|
)
|
|
|
|
release_fsm.act("WAIT_TX_ZERO",
|
|
If(rxdata_decimated == 0,
|
|
NextState("WAIT_PULSE"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("WAIT_PULSE",
|
|
If(rxdata_decimated != 0,
|
|
NextValue(rxdata_pulse_read, rxdata_decimated),
|
|
NextState("NEXT_RXDATA"),
|
|
),
|
|
)
|
|
|
|
next_rxdata = Signal(5)
|
|
|
|
release_fsm.act("NEXT_RXDATA",
|
|
NextValue(next_rxdata, rxdata_decimated),
|
|
NextState("WRITE_PULSE_UPPER"),
|
|
)
|
|
|
|
release_fsm.act("WRITE_PULSE_UPPER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0),
|
|
NextState("WRITE_PULSE_LOWER"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("WRITE_PULSE_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(rxdata_pulse_read),
|
|
NextState("WRITE_NEXT_UPPER"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("WRITE_NEXT_UPPER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0),
|
|
NextState("WRITE_NEXT_LOWER"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("WRITE_NEXT_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(next_rxdata),
|
|
NextState("TERMINATE"),
|
|
),
|
|
)
|
|
|
|
release_fsm.act("TERMINATE",
|
|
NextState("TERMINATE"),
|
|
)
|
|
|
|
else:
|
|
fsm = FSM(reset_state="WAIT_DONE")
|
|
self.submodules += fsm
|
|
|
|
fsm.act("WAIT_DONE",
|
|
self.bitslip_reader.start.eq(1),
|
|
If(self.bitslip_reader.done,
|
|
NextValue(bitslip_count, 0),
|
|
NextState("WRITE_UPPER"),
|
|
),
|
|
)
|
|
|
|
fsm.act("WRITE_UPPER",
|
|
# Exist state if all results are sent
|
|
If(bitslip_count == 5,
|
|
NextState("START_SLAVE_ALIGNER"),
|
|
).Elif(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.bitslip_reader.data_result[bitslip_count][8:]),
|
|
NextState("WRITE_LOWER"),
|
|
),
|
|
)
|
|
|
|
fsm.act("WRITE_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.bitslip_reader.data_result[bitslip_count][:8]),
|
|
NextValue(bitslip_count, bitslip_count + 1),
|
|
NextState("WRITE_UPPER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("START_SLAVE_ALIGNER",
|
|
self.slave_aligner.start.eq(1),
|
|
# self.rx.ce.eq(self.delay_optimizer.inc_en),
|
|
If(self.slave_aligner.done,
|
|
NextState("WRITE_DONE_UPPER"),
|
|
).Else(
|
|
NextState("START_SLAVE_ALIGNER")
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_DONE_UPPER",
|
|
self.post_align_reader.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("WRITE_DONE_LOWER")
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_DONE_LOWER",
|
|
self.post_align_reader.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("REREAD_BITSLIP")
|
|
)
|
|
)
|
|
|
|
fsm.act("REREAD_BITSLIP",
|
|
If(self.post_align_reader.done,
|
|
NextState("REWRITE_UPPER"),
|
|
).Else(
|
|
NextState("REREAD_BITSLIP"),
|
|
),
|
|
)
|
|
|
|
fsm.act("REWRITE_UPPER",
|
|
# Exist state if all results are sent
|
|
If(post_align_bitslip_count == 5,
|
|
NextState("WRITE_B2P_DIVIDER_UPPER"),
|
|
).Elif(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.post_align_reader.data_result[post_align_bitslip_count][8:]),
|
|
NextState("REWRITE_LOWER"),
|
|
),
|
|
)
|
|
|
|
fsm.act("REWRITE_LOWER",
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.post_align_reader.data_result[post_align_bitslip_count][:8]),
|
|
NextValue(post_align_bitslip_count, post_align_bitslip_count + 1),
|
|
NextState("REWRITE_UPPER"),
|
|
)
|
|
|
|
fsm.act("WRITE_B2P_DIVIDER_UPPER",
|
|
self.phase_reader.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("WRITE_B2P_DIVIDER_LOWER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_B2P_DIVIDER_LOWER",
|
|
self.phase_reader.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("WAIT_PHASE_READER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WAIT_PHASE_READER",
|
|
If(self.phase_reader.done,
|
|
NextState("WRITE_DELAY_UPPER"),
|
|
).Else(
|
|
NextState("WAIT_PHASE_READER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_DELAY_UPPER",
|
|
If(delay_tap_count == 32,
|
|
NextState("DELAY_SOLVER_DIVIDER_UPPER")
|
|
).Elif(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.phase_reader.data_result[delay_tap_count][8:]),
|
|
NextState("WRITE_DELAY_LOWER"),
|
|
),
|
|
)
|
|
|
|
fsm.act("WRITE_DELAY_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.phase_reader.data_result[delay_tap_count][:8]),
|
|
NextValue(delay_tap_count, delay_tap_count + 1),
|
|
NextState("WRITE_DELAY_UPPER")
|
|
),
|
|
)
|
|
|
|
fsm.act("DELAY_SOLVER_DIVIDER_UPPER",
|
|
self.delay_solver.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("DELAY_SOLVER_DIVIDER_LOWER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("DELAY_SOLVER_DIVIDER_LOWER",
|
|
self.delay_solver.start.eq(1),
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0xFF),
|
|
NextState("WAIT_DELAY_SOLVER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WAIT_DELAY_SOLVER",
|
|
If(self.delay_solver.done,
|
|
NextValue(select_odd, self.delay_solver.select_odd),
|
|
NextState("WRITE_UPPER_ZERO"),
|
|
).Else(
|
|
NextState("WAIT_DELAY_SOLVER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_UPPER_ZERO",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(0x00),
|
|
NextState("WRITE_LOWER_OPT"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_LOWER_OPT",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.delay_solver.opt_delay_tap),
|
|
NextState("WAIT_OPT_DELAY_ACTIVE"),
|
|
),
|
|
)
|
|
|
|
fsm.act("WAIT_OPT_DELAY_ACTIVE",
|
|
If(self.rx.cnt_out == self.delay_solver.opt_delay_tap,
|
|
NextState("RESAMPLE_RXDATA_UPPER"),
|
|
),
|
|
)
|
|
|
|
fsm.act("RESAMPLE_RXDATA_UPPER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.rx.rxdata[8:]),
|
|
NextState("RESAMPLE_RXDATA_LOWER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("RESAMPLE_RXDATA_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(self.rx.rxdata[:8]),
|
|
NextState("INTRA_ALIGN_DONE"),
|
|
)
|
|
)
|
|
|
|
fsm.act("INTRA_ALIGN_DONE",
|
|
rx_intra_aligned.eq(1),
|
|
NextState("WAIT_TX_ZERO"),
|
|
)
|
|
|
|
fsm.act("WAIT_TX_ZERO",
|
|
If(rxdata_decimated == 0,
|
|
NextState("WAIT_PULSE"),
|
|
),
|
|
)
|
|
|
|
fsm.act("WAIT_PULSE",
|
|
If(rxdata_decimated != 0,
|
|
NextValue(rxdata_pulse_read, rxdata_decimated),
|
|
NextState("WRITE_PULSE_UPPER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_PULSE_UPPER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(rxdata_pulse_read[8:]),
|
|
NextState("WRITE_PULSE_LOWER"),
|
|
)
|
|
)
|
|
|
|
fsm.act("WRITE_PULSE_LOWER",
|
|
If(self.tx_fifo.writable,
|
|
self.tx_fifo.we.eq(1),
|
|
self.tx_fifo.din.eq(rxdata_pulse_read[:8]),
|
|
NextState("TERMINATE"),
|
|
)
|
|
)
|
|
|
|
fsm.act("TERMINATE",
|
|
NextState("TERMINATE"),
|
|
)
|
|
|
|
tx_fsm = FSM(reset_state="SEND_TRAINING")
|
|
self.submodules += tx_fsm
|
|
|
|
tx_fsm.act("SEND_TRAINING",
|
|
self.tx.txdata.eq(0b00100),
|
|
If(rx_intra_aligned,
|
|
NextState("TX_ZERO"),
|
|
),
|
|
)
|
|
|
|
# Intra-ISERDES alignment done, investigate group delay
|
|
# TX is first set zero for around 16 cycles.
|
|
tx_zero_counter = Signal(5)
|
|
|
|
tx_fsm.act("TX_ZERO",
|
|
self.tx.txdata.eq(0b00000),
|
|
If(tx_zero_counter == 15,
|
|
NextState("TX_HIGH"),
|
|
).Else(
|
|
NextValue(tx_zero_counter, tx_zero_counter + 1),
|
|
),
|
|
)
|
|
|
|
tx_fsm.act("TX_HIGH",
|
|
self.tx.txdata.eq(0b11111),
|
|
NextState("TX_LOW"),
|
|
)
|
|
|
|
tx_fsm.act("TX_LOW",
|
|
self.tx.txdata.eq(0b00000),
|
|
)
|
|
|
|
|
|
if __name__ == "__main__":
|
|
platform = kasli.Platform(hw_rev="v2.0")
|
|
|
|
# Generate pads for the I/O blocks
|
|
eem = 1
|
|
generate_pads(platform, eem)
|
|
pad = platform.request("dio{}".format(eem), 0)
|
|
|
|
crg = TransceiverCRG(platform, platform.request("clk125_gtp"))
|
|
top = SingleSerDesLoopBack(pad, crg.sys_clk_freq, True)
|
|
|
|
# Wire up UART core to the pads
|
|
uart_pads = platform.request("serial")
|
|
top.comb += [
|
|
top.uart_rx.eq(uart_pads.rx),
|
|
uart_pads.tx.eq(top.uart_tx),
|
|
]
|
|
|
|
top.submodules += crg
|
|
platform.build(top)
|