forked from M-Labs/artiq
393 lines
8.7 KiB
C
393 lines
8.7 KiB
C
#include <stdio.h>
|
|
#include <string.h>
|
|
#include <irq.h>
|
|
#include <uart.h>
|
|
#include <console.h>
|
|
#include <system.h>
|
|
#include <time.h>
|
|
#include <generated/csr.h>
|
|
#include <hw/flags.h>
|
|
|
|
#ifdef CSR_ETHMAC_BASE
|
|
#include <netif/etharp.h>
|
|
#include <netif/liteethif.h>
|
|
#include <lwip/init.h>
|
|
#include <lwip/memp.h>
|
|
#include <lwip/ip4_addr.h>
|
|
#include <lwip/ip4.h>
|
|
#include <lwip/netif.h>
|
|
#include <lwip/sys.h>
|
|
#include <lwip/tcp.h>
|
|
#include <lwip/timers.h>
|
|
#endif
|
|
|
|
#include "test_mode.h"
|
|
#include "session.h"
|
|
|
|
#ifdef CSR_ETHMAC_BASE
|
|
unsigned char macadr[6] = {0x10, 0xe2, 0xd5, 0x00, 0x00, 0x00};
|
|
|
|
u32_t clock_ms;
|
|
|
|
u32_t sys_now(void)
|
|
{
|
|
unsigned int freq;
|
|
unsigned int prescaler;
|
|
|
|
freq = identifier_frequency_read();
|
|
prescaler = freq/1000; /* sys_now expects time in ms */
|
|
timer0_update_value_write(1);
|
|
clock_ms += (0xffffffff - timer0_value_read())/prescaler;
|
|
/* Reset timer to avoid rollover, this will increase clock_ms
|
|
drift but we don't need precision */
|
|
timer0_en_write(0);
|
|
timer0_en_write(1);
|
|
return clock_ms;
|
|
}
|
|
|
|
static struct netif netif;
|
|
|
|
static void lwip_service(void)
|
|
{
|
|
sys_check_timeouts();
|
|
if(ethmac_sram_writer_ev_pending_read() & ETHMAC_EV_SRAM_WRITER) {
|
|
liteeth_input(&netif);
|
|
ethmac_sram_writer_ev_pending_write(ETHMAC_EV_SRAM_WRITER);
|
|
}
|
|
}
|
|
|
|
static void network_init(void)
|
|
{
|
|
struct ip4_addr local_ip;
|
|
struct ip4_addr netmask;
|
|
struct ip4_addr gateway_ip;
|
|
|
|
timer0_en_write(0);
|
|
timer0_load_write(0xffffffff);
|
|
timer0_reload_write(0xffffffff);
|
|
timer0_en_write(1);
|
|
clock_ms = 0;
|
|
|
|
IP4_ADDR(&local_ip, 192, 168, 0, 42);
|
|
IP4_ADDR(&netmask, 255, 255, 255, 0);
|
|
IP4_ADDR(&gateway_ip, 192, 168, 0, 1);
|
|
|
|
lwip_init();
|
|
|
|
netif_add(&netif, &local_ip, &netmask, &gateway_ip, 0, liteeth_init, ethernet_input);
|
|
netif_set_default(&netif);
|
|
netif_set_up(&netif);
|
|
netif_set_link_up(&netif);
|
|
}
|
|
|
|
struct kserver_connstate {
|
|
int magic_recognized;
|
|
struct pbuf *rp;
|
|
int rp_offset;
|
|
};
|
|
|
|
static struct kserver_connstate *cs_new(void)
|
|
{
|
|
struct kserver_connstate *cs;
|
|
|
|
cs = (struct kserver_connstate *)mem_malloc(sizeof(struct kserver_connstate));
|
|
if(!cs)
|
|
return NULL;
|
|
cs->magic_recognized = 0;
|
|
cs->rp = NULL;
|
|
cs->rp_offset = 0;
|
|
return cs;
|
|
}
|
|
|
|
static void cs_free(struct kserver_connstate *cs)
|
|
{
|
|
if(cs->rp)
|
|
pbuf_free(cs->rp);
|
|
mem_free(cs);
|
|
}
|
|
|
|
static const char kserver_magic[] = "ARTIQ coredev\n";
|
|
|
|
static int magic_ok(struct kserver_connstate *cs)
|
|
{
|
|
return cs->magic_recognized >= 14;
|
|
}
|
|
|
|
static struct kserver_connstate *active_cs;
|
|
static struct tcp_pcb *active_pcb;
|
|
|
|
static void kserver_close(struct kserver_connstate *cs, struct tcp_pcb *pcb)
|
|
{
|
|
if(cs == active_cs) {
|
|
session_end();
|
|
active_cs = NULL;
|
|
active_pcb = NULL;
|
|
}
|
|
|
|
/* lwip loves to call back with broken pointers. Prevent that. */
|
|
tcp_arg(pcb, NULL);
|
|
tcp_recv(pcb, NULL);
|
|
tcp_sent(pcb, NULL);
|
|
tcp_err(pcb, NULL);
|
|
|
|
cs_free(cs);
|
|
tcp_close(pcb);
|
|
}
|
|
|
|
static err_t kserver_recv(void *arg, struct tcp_pcb *pcb, struct pbuf *p, err_t err)
|
|
{
|
|
struct kserver_connstate *cs;
|
|
|
|
cs = (struct kserver_connstate *)arg;
|
|
if(p) {
|
|
if(cs->rp)
|
|
pbuf_cat(cs->rp, p);
|
|
else {
|
|
cs->rp = p;
|
|
cs->rp_offset = 0;
|
|
}
|
|
} else
|
|
kserver_close(cs, pcb);
|
|
return ERR_OK;
|
|
}
|
|
|
|
static err_t kserver_sent(void *arg, struct tcp_pcb *pcb, u16_t len)
|
|
{
|
|
session_ack_mem(len);
|
|
return ERR_OK;
|
|
}
|
|
|
|
static void tcp_pcb_service(void *arg, struct tcp_pcb *pcb)
|
|
{
|
|
struct kserver_connstate *cs;
|
|
int remaining_in_pbuf;
|
|
char *rpp;
|
|
struct pbuf *next;
|
|
int r;
|
|
|
|
cs = (struct kserver_connstate *)arg;
|
|
|
|
while(cs->rp) {
|
|
remaining_in_pbuf = cs->rp->len - cs->rp_offset;
|
|
rpp = (char *)cs->rp->payload;
|
|
while(remaining_in_pbuf > 0) {
|
|
if(cs == active_cs) {
|
|
r = session_input(&rpp[cs->rp_offset], remaining_in_pbuf);
|
|
if(r > 0) {
|
|
tcp_recved(pcb, r);
|
|
cs->rp_offset += r;
|
|
remaining_in_pbuf -= r;
|
|
} else if(r == 0)
|
|
return;
|
|
else
|
|
kserver_close(cs, pcb);
|
|
} else {
|
|
if(rpp[cs->rp_offset] == kserver_magic[cs->magic_recognized]) {
|
|
cs->magic_recognized++;
|
|
if(magic_ok(cs)) {
|
|
if(active_cs)
|
|
kserver_close(active_cs, active_pcb);
|
|
session_start();
|
|
active_cs = cs;
|
|
active_pcb = pcb;
|
|
tcp_sent(pcb, kserver_sent);
|
|
}
|
|
} else {
|
|
kserver_close(cs, pcb);
|
|
return;
|
|
}
|
|
remaining_in_pbuf--;
|
|
cs->rp_offset++;
|
|
tcp_recved(pcb, 1);
|
|
}
|
|
}
|
|
next = cs->rp->next;
|
|
if(cs->rp->tot_len != cs->rp->len) {
|
|
pbuf_ref(next);
|
|
pbuf_free(cs->rp);
|
|
cs->rp = next;
|
|
cs->rp_offset = 0;
|
|
} else {
|
|
pbuf_free(cs->rp);
|
|
cs->rp = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void kserver_err(void *arg, err_t err)
|
|
{
|
|
struct kserver_connstate *cs;
|
|
|
|
cs = (struct kserver_connstate *)arg;
|
|
cs_free(cs);
|
|
}
|
|
|
|
static struct tcp_pcb *listen_pcb;
|
|
|
|
static err_t kserver_accept(void *arg, struct tcp_pcb *newpcb, err_t err)
|
|
{
|
|
struct kserver_connstate *cs;
|
|
|
|
cs = cs_new();
|
|
if(!cs)
|
|
return ERR_MEM;
|
|
tcp_accepted(listen_pcb);
|
|
tcp_arg(newpcb, cs);
|
|
tcp_recv(newpcb, kserver_recv);
|
|
tcp_err(newpcb, kserver_err);
|
|
return ERR_OK;
|
|
}
|
|
|
|
static void kserver_init(void)
|
|
{
|
|
listen_pcb = tcp_new();
|
|
tcp_bind(listen_pcb, IP_ADDR_ANY, 1381);
|
|
listen_pcb = tcp_listen(listen_pcb);
|
|
tcp_accept(listen_pcb, kserver_accept);
|
|
}
|
|
|
|
extern struct tcp_pcb *tcp_active_pcbs;
|
|
|
|
static void kserver_service(void)
|
|
{
|
|
struct tcp_pcb *pcb;
|
|
void *data;
|
|
int len, sndbuf;
|
|
|
|
/* Assume all active TCP PCBs with a non-NULL arg are our connections. */
|
|
pcb = tcp_active_pcbs;
|
|
while(pcb) {
|
|
if(pcb->callback_arg)
|
|
tcp_pcb_service(pcb->callback_arg, pcb);
|
|
pcb = pcb->next;
|
|
}
|
|
|
|
if(active_cs) {
|
|
session_poll(&data, &len);
|
|
if(len > 0) {
|
|
sndbuf = tcp_sndbuf(active_pcb);
|
|
if(len > sndbuf)
|
|
len = sndbuf;
|
|
tcp_write(active_pcb, data, len, 0);
|
|
session_ack_data(len);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void regular_main(void)
|
|
{
|
|
network_init();
|
|
kserver_init();
|
|
|
|
while(1) {
|
|
lwip_service();
|
|
kserver_service();
|
|
}
|
|
}
|
|
|
|
#else /* CSR_ETHMAC_BASE */
|
|
|
|
static void serial_service(void)
|
|
{
|
|
char *txdata;
|
|
int txlen;
|
|
static char rxdata;
|
|
static int rxpending;
|
|
int r, i;
|
|
|
|
if(!rxpending && uart_read_nonblock()) {
|
|
rxdata = uart_read();
|
|
rxpending = 1;
|
|
}
|
|
if(rxpending) {
|
|
r = session_input(&rxdata, 1);
|
|
if(r > 0)
|
|
rxpending = 0;
|
|
if(r < 0) {
|
|
session_end();
|
|
session_start();
|
|
}
|
|
}
|
|
|
|
session_poll((void **)&txdata, &txlen);
|
|
if(txlen > 0) {
|
|
for(i=0;i<txlen;i++)
|
|
uart_write(txdata[i]);
|
|
session_ack_data(txlen);
|
|
session_ack_mem(txlen);
|
|
}
|
|
}
|
|
|
|
static void regular_main(void)
|
|
{
|
|
/* Open the session for the serial control. */
|
|
session_start();
|
|
while(1)
|
|
serial_service();
|
|
}
|
|
|
|
#endif
|
|
|
|
static void blink_led(void)
|
|
{
|
|
int i, ev, p;
|
|
|
|
p = identifier_frequency_read()/10;
|
|
time_init();
|
|
for(i=0;i<3;i++) {
|
|
leds_out_write(1);
|
|
while(!elapsed(&ev, p));
|
|
leds_out_write(0);
|
|
while(!elapsed(&ev, p));
|
|
}
|
|
}
|
|
|
|
static int check_test_mode(void)
|
|
{
|
|
char c;
|
|
|
|
timer0_en_write(0);
|
|
timer0_reload_write(0);
|
|
timer0_load_write(identifier_frequency_read() >> 2);
|
|
timer0_en_write(1);
|
|
timer0_update_value_write(1);
|
|
while(timer0_value_read()) {
|
|
if(readchar_nonblock()) {
|
|
c = readchar();
|
|
if((c == 't')||(c == 'T'))
|
|
return 1;
|
|
}
|
|
timer0_update_value_write(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int main(void)
|
|
{
|
|
irq_setmask(0);
|
|
irq_setie(1);
|
|
uart_init();
|
|
|
|
#ifdef ARTIQ_AMP
|
|
puts("ARTIQ runtime built "__DATE__" "__TIME__" for AMP systems\n");
|
|
#else
|
|
puts("ARTIQ runtime built "__DATE__" "__TIME__" for UP systems\n");
|
|
#endif
|
|
#ifdef CSR_ETHMAC_BASE
|
|
puts("Accepting sessions on Ethernet");
|
|
#else
|
|
puts("Accepting sessions on serial link");
|
|
#endif
|
|
puts("Press 't' to enter test mode...");
|
|
blink_led();
|
|
|
|
if(check_test_mode()) {
|
|
puts("Entering test mode.");
|
|
test_main();
|
|
} else {
|
|
puts("Entering regular mode.");
|
|
regular_main();
|
|
}
|
|
return 0;
|
|
}
|