forked from M-Labs/artiq
118 lines
3.6 KiB
Python
118 lines
3.6 KiB
Python
from artiq.language.core import syscall, kernel
|
|
from artiq.language.types import TBool, TInt32, TNone
|
|
from artiq.coredevice.exceptions import I2CError
|
|
|
|
|
|
@syscall(flags={"nowrite"})
|
|
def i2c_init(busno: TInt32) -> TNone:
|
|
raise NotImplementedError("syscall not simulated")
|
|
|
|
|
|
@syscall(flags={"nounwind", "nowrite"})
|
|
def i2c_start(busno: TInt32) -> TNone:
|
|
raise NotImplementedError("syscall not simulated")
|
|
|
|
|
|
@syscall(flags={"nounwind", "nowrite"})
|
|
def i2c_stop(busno: TInt32) -> TNone:
|
|
raise NotImplementedError("syscall not simulated")
|
|
|
|
|
|
@syscall(flags={"nounwind", "nowrite"})
|
|
def i2c_write(busno: TInt32, b: TInt32) -> TBool:
|
|
raise NotImplementedError("syscall not simulated")
|
|
|
|
|
|
@syscall(flags={"nounwind", "nowrite"})
|
|
def i2c_read(busno: TInt32, ack: TBool) -> TInt32:
|
|
raise NotImplementedError("syscall not simulated")
|
|
|
|
|
|
class PCA9548:
|
|
"""Driver for the PCA9548 I2C bus switch.
|
|
|
|
On the KC705, this chip is used for selecting the I2C buses on the two FMC
|
|
connectors. HPC=1, LPC=2.
|
|
"""
|
|
def __init__(self, dmgr, busno=0, address=0xe8, core_device="core"):
|
|
self.core = dmgr.get(core_device)
|
|
self.busno = busno
|
|
self.address = address
|
|
|
|
@kernel
|
|
def set(self, channel):
|
|
"""Select one channel.
|
|
|
|
Selecting multiple channels at the same time is not supported by this
|
|
driver.
|
|
|
|
:param channel: channel number (0-7)
|
|
"""
|
|
i2c_init(self.busno)
|
|
i2c_start(self.busno)
|
|
try:
|
|
if not i2c_write(self.busno, self.address):
|
|
raise I2CError("PCA9548 failed to ack address")
|
|
if not i2c_write(self.busno, 1 << channel):
|
|
raise I2CError("PCA9548 failed to ack control word")
|
|
finally:
|
|
i2c_stop(self.busno)
|
|
|
|
@kernel
|
|
def readback(self):
|
|
i2c_init(self.busno)
|
|
i2c_start(self.busno)
|
|
r = 0
|
|
try:
|
|
if not i2c_write(self.busno, self.address | 1):
|
|
raise I2CError("PCA9548 failed to ack address")
|
|
r = i2c_read(self.busno, False)
|
|
finally:
|
|
i2c_stop(self.busno)
|
|
return r
|
|
|
|
|
|
class TCA6424A:
|
|
"""Driver for the TCA6424A I2C I/O expander.
|
|
|
|
On the NIST QC2 hardware, this chip is used for switching the directions
|
|
of TTL buffers."""
|
|
def __init__(self, dmgr, busno=0, address=0x44, core_device="core"):
|
|
self.core = dmgr.get(core_device)
|
|
self.busno = busno
|
|
self.address = address
|
|
|
|
@kernel
|
|
def _write24(self, command, value):
|
|
i2c_init(self.busno)
|
|
i2c_start(self.busno)
|
|
try:
|
|
if not i2c_write(self.busno, self.address):
|
|
raise I2CError("TCA6424A failed to ack address")
|
|
if not i2c_write(self.busno, command):
|
|
raise I2CError("TCA6424A failed to ack command")
|
|
for i in range(3):
|
|
if not i2c_write(self.busno, value >> 16):
|
|
raise I2CError("TCA6424A failed to ack data")
|
|
value <<= 8
|
|
finally:
|
|
i2c_stop(self.busno)
|
|
|
|
@kernel
|
|
def set(self, outputs):
|
|
"""Drive all pins of the chip to the levels given by the
|
|
specified 24-bit word.
|
|
|
|
On the QC2 hardware, the LSB of the word determines the direction of
|
|
TTL0 (on a given FMC card) and the MSB that of TTL23.
|
|
|
|
A bit set to 1 means the TTL is an output.
|
|
"""
|
|
outputs_le = (
|
|
((outputs & 0xff0000) >> 16) |
|
|
(outputs & 0x00ff00) |
|
|
(outputs & 0x0000ff) << 16)
|
|
|
|
self._write24(0x8c, 0) # set all directions to output
|
|
self._write24(0x84, outputs_le) # set levels
|