Robert Jördens
a6b45caefa
conda: new openocd
...
* new jtagspi protocol
* new proxy bitstreams
2017-10-23 12:39:27 +02:00
Robert Jördens
34ddda7a0c
conda: use single-tap proxy bitstreams
2017-08-15 14:30:53 -06:00
Robert Jördens
5c66b63768
setup.py etc: update license
2017-07-18 11:31:43 +02:00
Sebastien Bourdeauducq
10fb6c6216
conda: set ignore_prefix_files on all board packages
2017-06-15 16:25:52 +08:00
Sebastien Bourdeauducq
5e94810e84
Revert "Revert "conda: use new noarch system for board packages as well""
...
This reverts commit 832fb139a0
2017-06-15 16:10:58 +08:00
Sebastien Bourdeauducq
832fb139a0
Revert "conda: use new noarch system for board packages as well"
...
Never missing an opportunity to be awful, conda helps itself with the .fbi files and merrily patches the strings inside them that contain paths resembling the conda build folder, resulting of course in corrupption and CRC errors.
This reverts commit c856b22579
2017-06-15 16:00:00 +08:00
Sebastien Bourdeauducq
c856b22579
conda: use new noarch system for board packages as well
2017-06-06 15:05:13 +08:00
Sebastien Bourdeauducq
0b437c7645
conda: shorten git hash in strings to 8 characters instead of 12
2017-06-05 11:43:10 +08:00
d383145752
conda: use GIT_FULL_HASH rather than GIT_DESCRIBE_HASH.
2017-04-20 16:58:38 +00:00
c9b20a1765
Commit missing parts of 0d0ddf2e.
2017-04-20 16:53:16 +00:00
0d0ddf2e58
conda: limit git hashes in build numbers to 8 chars exactly.
...
Before this commit, a nasty edge case was possible where repositories
on different builders have had different sets of objects fetched
into them, and so git-describe selected different lengths for
abbreviating hashes.
See also https://github.com/conda/conda-build/issues/1940 .
2017-04-20 16:40:10 +00:00
3de19f6786
conda: use verbose misoc build.
2017-02-05 14:26:08 +00:00
Robert Jördens
fb56c32d35
conda: use artiq-dev metapackage
2017-02-01 15:34:05 +01:00
c585784cd9
conda: bump misoc dependency.
2017-01-30 08:03:41 +00:00
Sebastien Bourdeauducq
bff5f1b714
conda: update migen
2017-01-30 13:39:44 +08:00
Robert Jördens
9e92706d09
conda: pin misoc/migen package hashes
2017-01-27 14:43:24 +01:00
c45a170bb4
firmware: update for Rust 1.16.0.
2016-12-26 17:20:29 +00:00
Robert Jördens
ca636ef28a
conda/phaser: build-depend on numpy
2016-12-08 16:23:40 +01:00
Robert Jördens
7657cf1264
phaser: bump misoc/migen
2016-11-29 14:55:15 +01:00
Robert Jördens
41779367b5
phaser: adapt conda recipe
2016-11-24 16:04:13 +01:00
Robert Jördens
7664b226f2
phaser/conda: bump jesd204b
2016-11-18 15:34:03 +01:00
Robert Jördens
062aca2a6b
conda/phaser: build-depend on jesd204b
2016-10-19 14:44:54 +02:00
Robert Jördens
81511feab8
phaser: README: specify versions
2016-10-12 17:13:06 +02:00
Robert Jördens
4a0eaf0f95
phaser: add jesd204b rtio dds
...
gateware: add jesd204b awg
gateware: copy phaser (df3825a)
dsp/tools: update satadd mixin
phaser: no DDS stubs
dsp: accu fix
phaser: cleanup/reduce
sawg: kernel support and docs
sawg: coredevice api fixes
sawg: example ddb/experiment
phaser: add conda package
examples/phaser: typo
sawg: adapt tests, fix accu stb
sawg: tweak dds parameters
sawg: move/adapt/extend tests
sawg: test phy, refactor
phaser: non-rtio spi
phaser: target cli update
phaser: ad9154-fmc-ebz pins
phaser: reorganize fmc signal naming
phaser: add test mode stubs
phaser: txen is LVTTL
phaser: clk spi xfer test
phaser: spi for ad9154 and ad9516
phaser: spi tweaks
ad9154: add register map from ad9144.xml
ad9516: add register map from ad9517.xml and manual adaptation
ad9154_reg: just generate getter/setter macros as well
ad9154: reg WIP
ad9154: check and fix registers
kc705: single ended rtio_external_clk
use single ended user_sma_clk_n instead of p/n to free up one clock sma
kc705: mirror clk200 at user_sma_clock_p
ad9516_regs.h: fix B_COUNTER_MSB
phase: wire up clocking differently
needs patched misoc
kc705: feed rtio_external_clock directly
kc705: remove rtio_external_clk for phaser
phaser: spi tweaks
ad9516: some startup
ad9516_reg fixes
phaser: setup ad9516 for supposed 500 MHz operation
ad9516: use full duplex spi
ad9154_reg: add CONFIG_REG_2
ad9154_reg: fixes
phaser: write some ad9154 config
ad9154_reg: fixes
ad9154: more init, and human readable setup
ad9154/ad9516: merge spi support
ad9154: status readout
Revert "kc705: remove rtio_external_clk for phaser"
This reverts commit d500288bb44f2bf2eeb0c2f237aa207b0a8b1366.
Revert "kc705: feed rtio_external_clock directly"
This reverts commit 8dc7825519e3e75b7d3d29c9abf10fc6e3a8b4c5.
Revert "phase: wire up clocking differently"
This reverts commit ad9cc450ffa35abb54b0842d56f6cf6c53c6fbcc.
Revert "kc705: mirror clk200 at user_sma_clock_p"
This reverts commit 7f0dffdcdd28e648af84725682f82ec6e5642eba.
Revert "kc705: single ended rtio_external_clk"
This reverts commit a9426d983fbf5c1cb768da8f1da26d9b7335e9cf.
ad9516: 2000 MHz clock
phaser: test clock dist
phaser: test freqs
ad9154: iostandards
phaser: drop clock monitor
phaser: no separate i2c
phaser: drive rtio from refclk, wire up sysref
phaser: ttl channel for sync
ad9154: 4x interp, status, tweaks
phaser: sync/sysref 33V banks
phaser: sync/sysref LVDS_25 inputs are VCCO tolerant
phaser: user input-only ttls
phaser: rtio fully from refclk
ad9154: reg name usage fix
ad9154: check register modifications
Revert "ad9154: check register modifications"
This reverts commit 45121d90edf89f7bd8703503f9f317ad050f9564.
ad9154: fix status code
ad9154: addrinc, recal serdes pll
phaser: coredevice, example tweaks
sawg: missing import
sawg: type fixes
ad9514: move setup functions
ad9154: msb first also decreasing addr
phaser: use sys4x for rtio internal ref
phaser: move init code to main
phaser: naming cleanup
phaser: cleanup pins
phaser: move spi to kernel cpu
phaser: kernel support for ad9154 spi
ad9154: add r/w methods
ad9154: need return annotations
ad9154: r/w methods are kernels
ad9154_reg: portable helpers
phaser: cleanup startup kernel
ad9154: status test
ad9154: prbs test
ad9154: move setup, document
phaser: more documentation
2016-10-05 16:17:50 +02:00
Robert Jördens
Sebastien Bourdeauducq
whitequark