occheung/artiq
1
0
Fork 0
forked from M-Labs/artiq
Code Pull Requests Activity

README_PHASER: update

Browse Source
This commit is contained in:
Robert Jördens 2016-12-06 20:22:47 +01:00
parent 5efd0fcea5
commit d34084be0f
1 changed files with 19 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
README_PHASER.rst
View File

@ -1,16 +1,15 @@
ARTIQ Phaser ARTIQ Phaser
============ ============
This ARTIQ branch contains a proof-of-concept design of a GHz-datarate multichannel direct digital synthesizer (DDS) compatible with ARTIQ's RTIO channels. This ARTIQ branch contains a proof-of-concept design of a GHz-datarate, multi-channel, interpolating, multi-tone, direct digital synthesizer (DDS) compatible with ARTIQ's RTIO channels.
In later developments this proof-of-concept can be expanded to provide a two-tone output with spline modulation and multi-DAC synchronization. Ultimately it will be the basis for the ARTIQ Sayma Smart Arbitrary Waveform Generator project. See https://github.com/m-labs/sinara and https://github.com/m-labs/artiq-hardware.
Ultimately it will be the basis for the ARTIQ Sayma Smart Arbitrary Waveform Generator project. See https://github.com/m-labs/sayma and https://github.com/m-labs/artiq-hardware.
*Features*: *Features*:
* up to 4 channels * up to 4 channels
* up to 500 MHz data rate per channel (KC705 limitation) * up to 500 MHz data rate per channel (KC705 limitation)
* up to 8x interpolation to 2.4 GHz DAC sample rate * up to 8x interpolation to 2.4 GHz DAC sample rate
* Real-time control over amplitude, frequency, phase of each channel through ARTIQ RTIO commands * Real-time sample-coherent control over amplitude, frequency, phase of each channel through ARTIQ RTIO commands
* Full configurability of the AD9154 and AD9516 through SPI with ARTIQ kernel support * Full configurability of the AD9154 and AD9516 through SPI with ARTIQ kernel support
* All SPI registers and register bits exposed as human readable names * All SPI registers and register bits exposed as human readable names
* Parametrized JESD204B core (also capable of operation with eight lanes) * Parametrized JESD204B core (also capable of operation with eight lanes)
@ -18,12 +17,11 @@ Ultimately it will be the basis for the ARTIQ Sayma Smart Arbitrary Waveform Gen
The hardware required to use the ARTIQ phaser branch is a KC705 with an AD9154-FMC-EBZ plugged into the HPC connector and a low-noise sample rate reference clock. The hardware required to use the ARTIQ phaser branch is a KC705 with an AD9154-FMC-EBZ plugged into the HPC connector and a low-noise sample rate reference clock.
This work was supported by the Army Research Lab. This work was supported by the Army Research Lab and the University of Maryland.
The code that was developed for this project is located in several repositories: The code that was developed for this project is located in several repositories:
* In ARTIQ, the SAWG and Phaser code: https://github.com/m-labs/artiq/compare/phaser * In ARTIQ, the SAWG and Phaser code: https://github.com/m-labs/artiq/compare/phaser2
* The CORDIC core has been reused from the PDQ2 gateware https://github.com/m-labs/pdq2
* The Migen/MiSoC JESD204B core: https://github.com/m-labs/jesd204b * The Migen/MiSoC JESD204B core: https://github.com/m-labs/jesd204b
@ -32,7 +30,7 @@ Installation
These installation instructions are a short form of those in the ARTIQ manual. These installation instructions are a short form of those in the ARTIQ manual.
Please refer to and follow the ARTIQ manual for more details: Please refer to and follow the ARTIQ manual for more details:
https://m-labs.hk/artiq/manual-release-2/index.html https://m-labs.hk/artiq/manual-master/index.html
* Set up a new conda environment and activate it. * Set up a new conda environment and activate it.
* Install the standard ARTIQ runtime/install dependencies. * Install the standard ARTIQ runtime/install dependencies.
@ -42,22 +40,20 @@ https://m-labs.hk/artiq/manual-release-2/index.html
* Install the standard ARTIQ build dependencies. * Install the standard ARTIQ build dependencies.
They are all available as conda packages in m-labs/main or m-labs/dev for linux-64: They are all available as conda packages in m-labs/main or m-labs/dev for linux-64:
- migen =0.4 - migen
- misoc =0.4 - misoc
- llvm-or1k =3.8 - jesd204b
- llvm-or1k
- rust-core-or1k - rust-core-or1k
- cargo - cargo
- binutils-or1k-linux >=2.27 - binutils-or1k-linux
* Install a recent version of Vivado (tested and developed with 2016.2). * Install a recent version of Vivado (tested and developed with 2016.2).
* Checkout the ARTIQ phaser branch and the JESD204B core: :: * Do a checkout of the ARTIQ phaser2 branch: ::
mkdir ~/src mkdir ~/src
cd ~/src cd ~/src
git clone --recursive -b phaser https://github.com/m-labs/artiq.git git clone --recursive -b phaser2 https://github.com/m-labs/artiq.git
git clone https://github.com/m-labs/jesd204b.git
cd jesd204b
python setup.py develop
cd ../artiq cd ../artiq
python setup.py develop python setup.py develop
@ -74,11 +70,13 @@ Setup
* Compile the ARTIQ Phaser bitstream, bios, and runtime (c.f. ARTIQ manual): :: * Compile the ARTIQ Phaser bitstream, bios, and runtime (c.f. ARTIQ manual): ::
python -m artiq.gateware.targets.phaser --toolchain vivado python -m artiq.gateware.targets.phaser
* Generate an ARTIQ configuration flash image with MAC and IP address (see the
documentation for ``artiq_mkfs``). Name it ``phaser_config.bin``.
* Run the following OpenOCD command to flash the ARTIQ phaser design: :: * Run the following OpenOCD command to flash the ARTIQ phaser design: ::
openocd -f board/kc705.cfg -c "init; jtagspi_init 0 bscan_spi_xc7k325t.bit; jtagspi_program misoc_phaser_kc705/gateware/top.bin 0x000000; jtagspi_program misoc_phaser_kc705/software/bios/bios.bin 0xaf0000; jtagspi_program misoc_phaser_kc705/software/runtime/runtime.fbi 0xb00000; xc7_program xc7.tap; exit" openocd -f board/kc705.cfg -c "init; jtagspi_init 0 bscan_spi_xc7k325t.bit; jtagspi_program misoc_phaser_kc705/gateware/top.bin 0x000000; jtagspi_program misoc_phaser_kc705/software/bios/bios.bin 0xaf0000; jtagspi_program misoc_phaser_kc705/software/runtime/runtime.fbi 0xb00000;jtagspi_program phaser_config.bin 0xb80000; xc7_program xc7.tap; exit"
The proxy bitstream ``bscan_spi_xc7k325t.bit`` can be found at https://github.com/jordens/bscan_spi_bitstreams or in any ARTIQ conda package for the KC705. The proxy bitstream ``bscan_spi_xc7k325t.bit`` can be found at https://github.com/jordens/bscan_spi_bitstreams or in any ARTIQ conda package for the KC705.
See the source code of ``artiq_flash.py`` from ARTIQ for more details. See the source code of ``artiq_flash.py`` from ARTIQ for more details.
@ -91,7 +89,7 @@ Setup
* Refer to the ARTIQ documentation to configure an IP address and other settings for the transmitter device. * Refer to the ARTIQ documentation to configure an IP address and other settings for the transmitter device.
If the board was running stock ARTIQ before, the settings will be kept. If the board was running stock ARTIQ before, the settings will be kept.
* A 300 MHz clock of roughly 10 dBm (0.2 to 3.4 V peak-to-peak into 50 Ohm) must be connected to the AD9154-FMC-EBZ J1. * A 300 MHz clock of roughly 10 dBm (0.2 to 3.4 V peak-to-peak into 50 Ohm) must be connected to the AD9154-FMC-EBZ J1.
The external RTIO clock, DAC deviceclock, FPGA deviceclock, and SYSREF are derived from this signal. The external RTIO clock, DAC deviceclock, FPGA deviceclock, and SYSREF are derived from this signal. There is no internal RTIO clock.
* An example device database, several status and test scripts are provided in ``artiq/examples/phaser/``. :: * An example device database, several status and test scripts are provided in ``artiq/examples/phaser/``. ::
cd artiq/examples/phaser cd artiq/examples/phaser
@ -109,9 +107,9 @@ Usage
* Run ``artiq_run repository/ad9154_test_status.py`` to retrieve and print several status registers from the AD9154 DAC. * Run ``artiq_run repository/ad9154_test_status.py`` to retrieve and print several status registers from the AD9154 DAC.
* Run ``artiq_run repository/ad9154_test_prbs.py`` to test the JESD204B PHY layer for bit errors. Reboot the core device afterwards. * Run ``artiq_run repository/ad9154_test_prbs.py`` to test the JESD204B PHY layer for bit errors. Reboot the core device afterwards.
* Run ``artiq_run repository/ad9154_test_stpl.py`` to executes a JESD204B short transport layer test. * Run ``artiq_run repository/ad9154_test_stpl.py`` to executes a JESD204B short transport layer test.
* Run ``artiq_run repository/sawg.py`` for an example that sets up amplitudes, frequencies, and phases on all four DDS channels.
* Run ``artiq_run repository/demo.py`` for an example that exercises several different use cases of synchronized phase, amplitude, and frequency updates. * Run ``artiq_run repository/demo.py`` for an example that exercises several different use cases of synchronized phase, amplitude, and frequency updates.
for an example that exercises several different use cases of synchronized phase, amplitude, and frequency updates. for an example that exercises several different use cases of synchronized phase, amplitude, and frequency updates.
* Run ``artiq_run repository/demo_2tone.py`` for an example that emits a shaped two-tone pulse.
* Implement your own experiments using the SAWG channels. * Implement your own experiments using the SAWG channels.
* Verify clock stability between the sample rate reference clock and the DAC outputs. * Verify clock stability between the sample rate reference clock and the DAC outputs.
* Changes to the AD9154 configuration can also be performed at runtime in experiments. * Changes to the AD9154 configuration can also be performed at runtime in experiments.