forked from M-Labs/artiq
1
0
Fork 0

add device for Korad KA3005P programmable DC power supply

This commit is contained in:
jboulder 2016-12-18 18:35:37 -07:00 committed by Sebastien Bourdeauducq
parent db5957a7e7
commit baac555f96
7 changed files with 256 additions and 0 deletions

View File

View File

@ -0,0 +1,148 @@
# Written by Joe Britton, 2016
import logging
import asyncio
import asyncserial
logger = logging.getLogger(__name__)
logger.setLevel(-10)
class UnexpectedResponse(Exception):
pass
class KoradKA3005P:
"""The Korad KA3005P is a 1-channel programmable power supply
(0-30V/0-5A) with both USB/serial and RS232 connectivity.
All amplitudes are in volts.
All currents are in amperes.
"""
# Serial interface gleaned from the following.
# https://github.com/starforgelabs/py-korad-serial
# https://sigrok.org/wiki/Korad_KAxxxxP_series
def __init__(self, serial_dev):
if serial_dev is None:
self.simulation = True
else:
self.simulation = False
self.port = asyncserial.AsyncSerial(serial_dev, baudrate=9600)
def close(self):
"""Close the serial port."""
if not self.simulation:
self.port.close()
async def _ser_read(self, fixed_length=None):
""" strings returned by firmware are zero-terminated or fixed length
"""
c = (await self.port.read(1)).decode()
r = c
while len(c) > 0 and ord(c) != 0 and not len(r) == fixed_length:
c = (await self.port.read(1)).decode()
r += c
logger.debug("_read %s: ", r)
return r
async def _ser_write(self, cmd):
logger.debug("_write %s: ", cmd)
await asyncio.sleep(0.1)
await self.port.write(cmd.encode('ascii'))
async def setup(self):
"""Configure in known state."""
await self.set_output(False)
await self.set_v(0)
await self.set_ovp(False)
await self.set_i(0)
await self.set_ocp(False)
async def get_id(self):
"""Request identification from device.
"""
if self.simulation:
return "KORADKA3005PV2.0"
await self._ser_write("*IDN?")
return await self._ser_read()
async def set_output(self, b):
"""Enable/disable the power output.
"""
if b:
await self._ser_write("OUT1")
else:
await self._ser_write("OUT0")
async def set_v(self, v):
"""Set the maximum output voltage."""
await self._ser_write("VSET1:{0:05.2f}".format(v))
async def get_v(self):
"""Request the voltage as set by the user."""
await self._ser_write("VSET1?")
return float(await self._ser_read(fixed_length=5))
async def measure_v(self):
"""Request the actual voltage output."""
await self._ser_write("VOUT1?")
return float(await self._ser_read(fixed_length=5))
async def set_ovp(self, b):
"""Enable/disable the "Over Voltage Protection", the PS will switch off the
output when the voltage rises above the actual level."""
if b:
await self._ser_write("OVP1")
else:
await self._ser_write("OVP0")
async def set_i(self, v):
"""Set the maximum output current."""
await self._ser_write("ISET1:{0:05.3f}".format(v))
async def get_i(self):
"""Request the current as set by the user. """
# ISET1? replies with a sixth byte on many models (all?)
# which is the sixth character from *IDN?
# reply if *IDN? was queried before (during same power cycle).
# This byte is read and discarded.
await self._ser_write("ISET1?")
r = await self._ser_read(fixed_length=5)
if r[0] == "K":
r = r[1:-1]
return float(r)
async def measure_i(self):
"""Request the actual output current."""
await self._ser_write("IOUT1?")
r = await self._ser_read(fixed_length=6)
if r[0] == "K":
r = r[1:-1]
return float(r)
async def set_ocp(self, b):
"""Enable/disable the "Over Current Protection", the PS will switch off
the output when the current rises above the actual level."""
if b:
await self._ser_write("OCP1")
else:
await self._ser_write("OCP0")
async def ping(self):
"""Check if device is responding."""
if self.simulation:
return True
try:
id = await self.get_id()
except asyncio.CancelledError:
raise
except:
return False
if id == "KORADKA3005PV2.0":
logger.debug("ping successful")
return True
else:
return False

View File

@ -0,0 +1,50 @@
#!/usr/bin/env python3.5
# Written by Joe Britton, 2016
import argparse
import logging
import sys
import asyncio
from artiq.devices.korad_ka3005p.driver import KoradKA3005P
from artiq.protocols.pc_rpc import simple_server_loop
from artiq.tools import *
logger = logging.getLogger(__name__)
def get_argparser():
parser = argparse.ArgumentParser(
description="ARTIQ controller for the Korad KA3005P programmable DC power supply")
simple_network_args(parser, 3256)
parser.add_argument(
"-d", "--device", default=None,
help="serial port.")
parser.add_argument(
"--simulation", action="store_true",
help="Put the driver in simulation mode, even if --device is used.")
verbosity_args(parser)
return parser
def main():
args = get_argparser().parse_args()
init_logger(args)
if not args.simulation and args.device is None:
print("You need to specify either --simulation or -d/--device "
"argument. Use --help for more information.")
sys.exit(1)
dev = KoradKA3005P(args.device if not args.simulation else None)
asyncio.get_event_loop().run_until_complete(dev.setup())
try:
simple_server_loop(
{"korad_ka3005p": dev}, bind_address_from_args(args), args.port)
finally:
dev.close()
if __name__ == "__main__":
main()

View File

@ -0,0 +1,38 @@
import sys
import unittest
from artiq.test.hardware_testbench import GenericControllerCase, ControllerCase
class GenericKoradKA3005PTest:
def test_parameters_readback(self):
# check device ID baked into firmware
ids = self.driver.get_id()
self.assertEqual(ids, "KORADKA3005PV2.0")
class TestKoradKA3005P(GenericKoradKA3005PTest, ControllerCase):
def setUp(self):
ControllerCase.setUp(self)
self.start_controller("koradka3005p")
self.driver = self.device_mgr.get("koradka3005p")
class TestKoradKA3005P(GenericKoradKA3005PTest, GenericControllerCase):
def get_device_db(self):
return {
"korad_ka3005p": {
"type": "controller",
"host": "::1",
"port": 3256,
"command": (sys.executable.replace("\\", "\\\\")
+ " -m artiq.frontend.korad_ka3005p_controller "
+ "-p {port} --simulation")
}
}
def setUp(self):
GenericControllerCase.setUp(self)
self.start_controller("korad_ka3005p")
self.driver = self.device_mgr.get("korad_ka3005p")

View File

@ -30,3 +30,6 @@ Default network ports
+--------------------------+--------------+ +--------------------------+--------------+
| Thorlabs T-Cube | 3255 | | Thorlabs T-Cube | 3255 |
+--------------------------+--------------+ +--------------------------+--------------+
| Korad KA3005P | 3256 |
-------------------------------------------

View File

@ -69,6 +69,22 @@ You can choose the LDA model with the ``-P`` parameter. The default is LDA-102.
:ref: artiq.frontend.lda_controller.get_argparser :ref: artiq.frontend.lda_controller.get_argparser
:prog: lda_controller :prog: lda_controller
Korad KA3005P
-------------
Driver
++++++
.. automodule:: artiq.devices.korad_ka3005p.driver
:members:
Controller
++++++++++
.. argparse::
:ref: artiq.frontend.korad_ka3005p_controller.get_argparser
:prog: korad_ka3005p_controller
Novatech 409B Novatech 409B
------------- -------------

View File

@ -36,6 +36,7 @@ console_scripts = [
"artiq_flash=artiq.frontend.artiq_flash:main", "artiq_flash=artiq.frontend.artiq_flash:main",
"lda_controller=artiq.frontend.lda_controller:main", "lda_controller=artiq.frontend.lda_controller:main",
"novatech409b_controller=artiq.frontend.novatech409b_controller:main", "novatech409b_controller=artiq.frontend.novatech409b_controller:main",
"korad_ka3005p_controller=artiq.frontend.korad_ka3005p_controller:main",
"pdq2_client=artiq.frontend.pdq2_client:main", "pdq2_client=artiq.frontend.pdq2_client:main",
"pdq2_controller=artiq.frontend.pdq2_controller:main", "pdq2_controller=artiq.frontend.pdq2_controller:main",
"thorlabs_tcube_controller=artiq.frontend.thorlabs_tcube_controller:main", "thorlabs_tcube_controller=artiq.frontend.thorlabs_tcube_controller:main",