occheung/artiq
1
0
Fork 0
forked from M-Labs/artiq
Code Pull Requests Activity

hmc830: be explicit about SPI mode selection

Browse Source
This commit is contained in:
Robert Jördens 2018-02-23 13:22:47 +00:00 committed by Robert Jordens
parent a7720d05cd
commit 6fbe0d8ed8
1 changed files with 10 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
artiq/firmware/libboard_artiq/hmc830_7043.rs
View File

@ -52,6 +52,8 @@ mod hmc830 {
fn spi_setup() {
unsafe {
while csr::converter_spi::idle_read() == 0 {}
// rising egde on CS since cs_polarity still 0
// selects "HMC Mode"
csr::converter_spi::offline_write(0);
csr::converter_spi::end_write(1);
csr::converter_spi::cs_polarity_write(0b0001);
@ -62,30 +64,30 @@ mod hmc830 {
csr::converter_spi::div_write(16 - 2);
csr::converter_spi::cs_write(1 << csr::CONFIG_CONVERTER_SPI_HMC830_CS);
// do a dummy cycle with cs still high to ensure Open mode
// (rising CLK before rising CS)
// do a dummy cycle with cs still high to clear CS
csr::converter_spi::length_write(0);
csr::converter_spi::data_write(0);
while csr::converter_spi::writable_read() == 0 {}
csr::converter_spi::length_write(31 - 1);
csr::converter_spi::length_write(32 - 1);
}
}
fn write(addr: u8, data: u32) {
let cmd = (0 << 6) | addr;
let val = ((cmd as u32) << 24) | data;
let val = ((addr as u32) << 24) | data;
unsafe {
while csr::converter_spi::writable_read() == 0 {}
csr::converter_spi::data_write(val << 1);
csr::converter_spi::data_write(val << 1); // last clk cycle loads data
while csr::converter_spi::writable_read() == 0 {}
}
}
fn read(addr: u8) -> u32 {
write(addr, 0);
// SDO (miso/read bits) is technically CPHA=1, while SDI is CPHA=0
// trust that the 8.2ns+0.2ns/pF provide enough hold time on top of
// the SPI round trip delay and stick with CPHA=0
write((1 << 6) | addr, 0);
unsafe {
while csr::converter_spi::writable_read() == 0 {}
csr::converter_spi::data_read() & 0xffffff
}
}