forked from M-Labs/artiq
1
0
Fork 0

sinara_tester: add Shuttler test

This commit is contained in:
linuswck 2024-05-23 13:29:09 +08:00 committed by Sébastien Bourdeauducq
parent 531640fa91
commit 4de3273e7a
1 changed files with 133 additions and 0 deletions

View File

@ -9,6 +9,7 @@ import sys
from artiq.experiment import *
from artiq.coredevice.ad9910 import AD9910, SyncDataEeprom
from artiq.coredevice.phaser import PHASER_GW_BASE, PHASER_GW_MIQRO
from artiq.coredevice.shuttler import shuttler_volt_to_mu
from artiq.master.databases import DeviceDB
from artiq.master.worker_db import DeviceManager
@ -61,6 +62,7 @@ class SinaraTester(EnvExperiment):
self.suservos = dict()
self.suschannels = dict()
self.almaznys = dict()
self.shuttler = dict()
ddb = self.get_device_db()
for name, desc in ddb.items():
@ -100,6 +102,17 @@ class SinaraTester(EnvExperiment):
self.suschannels[name] = self.get_device(name)
elif (module, cls) == ("artiq.coredevice.almazny", "AlmaznyLegacy"):
self.almaznys[name] = self.get_device(name)
elif (module, cls) == ("artiq.coredevice.shuttler", "Config"):
shuttler_name = name.replace("_config", "")
self.shuttler[shuttler_name] = ({
"config": self.get_device(name),
"trigger": self.get_device("{}_trigger".format(shuttler_name)),
"leds": [self.get_device("{}_led{}".format(shuttler_name, i)) for i in range(2)],
"dcbias": [self.get_device("{}_dcbias{}".format(shuttler_name, i)) for i in range(16)],
"dds": [self.get_device("{}_dds{}".format(shuttler_name, i)) for i in range(16)],
"relay": self.get_device("{}_relay".format(shuttler_name)),
"adc": self.get_device("{}_adc".format(shuttler_name)),
})
# Remove Urukul, Sampler, Zotino and Mirny control signals
# from TTL outs (tested separately) and remove Urukuls covered by
@ -148,6 +161,7 @@ class SinaraTester(EnvExperiment):
self.mirnies = sorted(self.mirnies.items(), key=lambda x: (x[1].cpld.bus.channel, x[1].channel))
self.suservos = sorted(self.suservos.items(), key=lambda x: x[1].channel)
self.suschannels = sorted(self.suschannels.items(), key=lambda x: x[1].channel)
self.shuttler = sorted(self.shuttler.items(), key=lambda x: x[1]["leds"][0].channel)
@kernel
def test_led(self, led):
@ -747,6 +761,125 @@ class SinaraTester(EnvExperiment):
print("Press ENTER when done.")
input()
@kernel
def setup_shuttler_init(self, relay, adc, dcbias, dds, trigger, config):
self.core.break_realtime()
# Reset Shuttler Output Relay
relay.init()
delay_mu(int64(self.core.ref_multiplier))
relay.enable(0x0000)
delay_mu(int64(self.core.ref_multiplier))
# Setup ADC and and Calibration
delay_mu(int64(self.core.ref_multiplier))
adc.power_up()
delay_mu(int64(self.core.ref_multiplier))
if adc.read_id() >> 4 != 0x038d:
print("Remote AFE Board's ADC is not found. Check Remote AFE Board's Cables Connections")
assert adc.read_id() >> 4 == 0x038d
delay_mu(int64(self.core.ref_multiplier))
adc.calibrate(dcbias, trigger, config)
#Reset Shuttler DAC Output
for ch in range(16):
self.setup_shuttler_set_output(dcbias, dds, trigger, ch, 0.0)
@kernel
def set_shuttler_relay(self, relay, val):
self.core.break_realtime()
relay.enable(val)
@kernel
def get_shuttler_output_voltage(self, adc, ch, cb):
self.core.break_realtime()
cb(adc.read_ch(ch))
@kernel
def setup_shuttler_set_output(self, dcbias, dds, trigger, ch, volt):
self.core.break_realtime()
dcbias[ch].set_waveform(
a0=shuttler_volt_to_mu(volt),
a1=0,
a2=0,
a3=0,
)
delay_mu(int64(self.core.ref_multiplier))
dds[ch].set_waveform(
b0=0,
b1=0,
b2=0,
b3=0,
c0=0,
c1=0,
c2=0,
)
delay_mu(int64(self.core.ref_multiplier))
trigger.trigger(1 << ch)
delay_mu(int64(self.core.ref_multiplier))
@kernel
def shuttler_relay_led_wave(self, relay):
while not is_enter_pressed():
self.core.break_realtime()
# do not fill the FIFOs too much to avoid long response times
t = now_mu() - self.core.seconds_to_mu(.2)
while self.core.get_rtio_counter_mu() < t:
pass
for ch in range(16):
relay.enable(1 << ch)
delay(100*ms)
relay.enable(0x0000)
delay(100*ms)
def test_shuttler(self):
print("*** Testing Shuttler.")
for card_n, (card_name, card_dev) in enumerate(self.shuttler):
print("Testing: ", card_name)
output_voltage = 0.0
def setv(x):
nonlocal output_voltage
output_voltage = x
self.setup_shuttler_init(card_dev["relay"], card_dev["adc"], card_dev["dcbias"], card_dev["dds"], card_dev["trigger"], card_dev["config"])
print("Check Remote AFE Board Relay LED Indicators.")
print("Press Enter to Continue.")
self.shuttler_relay_led_wave(card_dev["relay"])
self.set_shuttler_relay(card_dev["relay"], 0xFFFF)
passed = True
adc_readings = []
volt_set = [(-1)**i*(2.*card_n + .1*(i//2 + 1)) for i in range(16)]
print("Testing Shuttler DAC")
print("Voltages:", " ".join(["{:.1f}".format(x) for x in volt_set]))
for ch, volt in enumerate(volt_set):
self.setup_shuttler_set_output(card_dev["dcbias"], card_dev["dds"], card_dev["trigger"], ch, volt)
self.get_shuttler_output_voltage(card_dev["adc"], ch, setv)
if (abs(volt) - abs(output_voltage)) > 0.1:
passed = False
adc_readings.append(output_voltage)
print("Press Enter to Continue.")
input()
self.set_shuttler_relay(card_dev["relay"], 0x0000)
if passed:
print("PASSED")
else:
print("FAILED")
print("Shuttler Remote AFE Board ADC has abnormal readings.")
print(f"ADC Readings:", " ".join(["{:.2f}".format(x) for x in adc_readings]))
def run(self, tests):
print("****** Sinara system tester ******")
print("")