zynq-rs/libconfig/src/net_settings.rs
newell 6a45a0dfd0 ebaz4205 support
Co-authored-by: newell <newell.jensen@gmail.com>
Co-committed-by: newell <newell.jensen@gmail.com>
2024-09-30 14:08:58 +08:00

93 lines
3.1 KiB
Rust

use core::fmt;
use libboard_zynq::smoltcp::wire::{EthernetAddress, IpAddress};
use super::Config;
pub struct NetAddresses {
pub hardware_addr: EthernetAddress,
pub ipv4_addr: IpAddress,
#[cfg(feature = "ipv6")]
pub ipv6_ll_addr: IpAddress,
#[cfg(feature = "ipv6")]
pub ipv6_addr: Option<IpAddress>
}
impl fmt::Display for NetAddresses {
fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
write!(f, "MAC={} IPv4={} ",
self.hardware_addr, self.ipv4_addr)?;
#[cfg(feature = "ipv6")]
{
write!(f, "IPv6-LL={}", self.ipv6_ll_addr)?;
match self.ipv6_addr {
Some(addr) => write!(f, " {}", addr)?,
None => write!(f, " IPv6: no configured address")?
}
}
Ok(())
}
}
#[cfg(feature = "target_kasli_soc")]
fn get_address_from_eeprom() -> EthernetAddress {
use libboard_zynq::i2c::{I2c, eeprom};
let mut i2c = I2c::i2c0();
i2c.init().unwrap();
let mut eeprom = eeprom::EEPROM::new(&mut i2c, 16);
let address = eeprom.read_eui48().unwrap_or([0x02, 0x00, 0x00, 0x00, 0x00, 0x56]);
EthernetAddress(address)
}
pub fn get_addresses(cfg: &Config) -> NetAddresses {
#[cfg(feature = "target_zc706")]
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x52]);
#[cfg(feature = "target_zc706")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 52);
#[cfg(feature = "target_coraz7")]
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x54]);
#[cfg(feature = "target_coraz7")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 54);
#[cfg(feature = "target_redpitaya")]
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x55]);
#[cfg(feature = "target_redpitaya")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 55);
#[cfg(feature = "target_kasli_soc")]
let mut hardware_addr = get_address_from_eeprom();
#[cfg(feature = "target_kasli_soc")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 56);
#[cfg(feature = "target_ebaz4205")]
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x57]);
#[cfg(feature = "target_ebaz4205")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 57);
if let Ok(Ok(addr)) = cfg.read_str("mac").map(|s| s.parse()) {
hardware_addr = addr;
}
if let Ok(Ok(addr)) = cfg.read_str("ip").map(|s| s.parse()) {
ipv4_addr = addr;
}
#[cfg(feature = "ipv6")]
let ipv6_addr = cfg.read_str("ip6").ok().and_then(|s| s.parse().ok());
#[cfg(feature = "ipv6")]
let ipv6_ll_addr = IpAddress::v6(
0xfe80, 0x0000, 0x0000, 0x0000,
(((hardware_addr.0[0] ^ 0x02) as u16) << 8) | (hardware_addr.0[1] as u16),
((hardware_addr.0[2] as u16) << 8) | 0x00ff,
0xfe00 | (hardware_addr.0[3] as u16),
((hardware_addr.0[4] as u16) << 8) | (hardware_addr.0[5] as u16));
NetAddresses {
hardware_addr,
ipv4_addr,
#[cfg(feature = "ipv6")]
ipv6_ll_addr,
#[cfg(feature = "ipv6")]
ipv6_addr
}
}