forked from M-Labs/zynq-rs
1
0
Fork 0

zynq::ddr: implement configure_iob()

This commit is contained in:
Astro 2019-10-24 01:24:12 +02:00
parent afda48e3fe
commit a8886de067
3 changed files with 121 additions and 12 deletions

View File

@ -35,9 +35,11 @@ macro_rules! register_common {
}
pub mod $mod_name {
#[derive(Clone)]
pub struct Read {
pub inner: $inner,
}
#[derive(Clone)]
pub struct Write {
pub inner: $inner,
}

View File

@ -2,7 +2,7 @@ use crate::regs::{RegisterR, RegisterW, RegisterRW};
use super::slcr;
use super::clocks::CpuClocks;
/// Micron MT41J256M8HX-15E: 667 MHz
/// Micron MT41J256M8HX-15E: 667 MHz DDR3
const DDR_FREQ: u32 = 666_666_666;
const DCI_FREQ: u32 = 10_000_000;
@ -14,11 +14,14 @@ impl DdrRam {
let clocks = CpuClocks::get();
Self::clock_setup(&clocks);
Self::calibrate_iob_impedance(&clocks);
Self::configure_iob();
let ram = DdrRam {};
ram
}
/// Zynq-7000 AP SoC Technical Reference Manual:
/// 10.6.1 DDR Clock Initialization
fn clock_setup(clocks: &CpuClocks) {
let ddr3x_clk_divisor = ((clocks.ddr - 1) / DDR_FREQ + 1).min(255) as u8;
let ddr2x_clk_divisor = 3 * ddr3x_clk_divisor / 2;
@ -38,6 +41,8 @@ impl DdrRam {
});
}
/// Zynq-7000 AP SoC Technical Reference Manual:
/// 10.6.2 DDR IOB Impedance Calibration
fn calibrate_iob_impedance(clocks: &CpuClocks) {
let divisor0 = (clocks.ddr / DCI_FREQ)
.max(1).min(63) as u8;
@ -80,4 +85,49 @@ impl DdrRam {
while ! slcr.ddriob_dci_status.read().done() {}
});
}
/// Zynq-7000 AP SoC Technical Reference Manual:
/// 10.6.3 DDR IOB Configuration
fn configure_iob() {
slcr::RegisterBlock::unlocked(|slcr| {
let addr_config = slcr::DdriobConfig::zeroed()
.output_en(slcr::DdriobOutputEn::Obuf);
slcr.ddriob_addr0.write(addr_config.clone());
slcr.ddriob_addr1.write(addr_config);
let data_config = slcr::DdriobConfig::zeroed()
.inp_type(slcr::DdriobInputType::VrefDifferential)
.term_en(true)
.dci_type(slcr::DdriobDciType::Termination)
.output_en(slcr::DdriobOutputEn::Obuf);
slcr.ddriob_data0.write(data_config.clone());
slcr.ddriob_data1.write(data_config);
let diff_config = slcr::DdriobConfig::zeroed()
.inp_type(slcr::DdriobInputType::Differential)
.term_en(true)
.dci_type(slcr::DdriobDciType::Termination)
.output_en(slcr::DdriobOutputEn::Obuf);
slcr.ddriob_diff0.write(diff_config.clone());
slcr.ddriob_diff1.write(diff_config);
slcr.ddriob_clock.write(
slcr::DdriobConfig::zeroed()
.output_en(slcr::DdriobOutputEn::Obuf)
);
unsafe {
// Not documented in Technical Reference Manual
slcr.ddriob_drive_slew_addr.write(0x0018C61C);
slcr.ddriob_drive_slew_data.write(0x00F9861C);
slcr.ddriob_drive_slew_diff.write(0x00F9861C);
slcr.ddriob_drive_slew_clock.write(0x00F9861C);
}
// Enable internal V[REF]
slcr.ddriob_ddr_ctrl.modify(|_, w| w
.vref_ext_en_lower(false)
.vref_ext_en_upper(false)
.vref_sel(slcr::DdriobVrefSel::Vref0_75V)
.vref_int_en(true)
);
});
}
}

View File

@ -19,6 +19,45 @@ pub enum ArmPllSource {
IoPll = 0b11,
}
#[repr(u8)]
pub enum DdriobInputType {
Off = 0b00,
/// For SSTL, HSTL
VrefDifferential = 0b01,
Differential = 0b10,
Lvcmos = 0b11,
}
#[repr(u8)]
pub enum DdriobDciType {
/// DDR2/3L Addr and Clock
Disabled = 0b00,
/// LPDDR2
Drive = 0b01,
/// DDR2/3/3L Data and Diff
Termination = 0b11,
}
#[repr(u8)]
pub enum DdriobOutputEn {
Ibuf = 0b00,
Obuf = 0b11,
}
#[repr(u8)]
pub enum DdriobVrefSel {
/// For LPDDR2 with 1.2V IO
Vref0_6V,
/// For DDR3L with 1.35V IO
Vref0_675V,
/// For DDR3 with 1.5V IO
Vref0_75V,
/// For DDR2 with 1.8V IO
Vref0_9V,
}
#[repr(C)]
pub struct RegisterBlock {
pub scl: RW<u32>,
@ -190,17 +229,18 @@ pub struct RegisterBlock {
pub gpiob_cfg_hstl: RW<u32>,
pub gpiob_drvr_bias_ctrl: RW<u32>,
reserved21: [u32; 9],
pub ddriob_addr1: RW<u32>,
pub ddriob_data0: RW<u32>,
pub ddriob_data1: RW<u32>,
pub ddriob_diff0: RW<u32>,
pub ddriob_diff1: RW<u32>,
pub ddriob_clock: RW<u32>,
pub w_addr: RW<u32>,
pub w_data: RW<u32>,
pub w_diff: RW<u32>,
pub w_clock: RW<u32>,
pub ddriob_ddr_ctrl: RW<u32>,
pub ddriob_addr0: DdriobConfig,
pub ddriob_addr1: DdriobConfig,
pub ddriob_data0: DdriobConfig,
pub ddriob_data1: DdriobConfig,
pub ddriob_diff0: DdriobConfig,
pub ddriob_diff1: DdriobConfig,
pub ddriob_clock: DdriobConfig,
pub ddriob_drive_slew_addr: RW<u32>,
pub ddriob_drive_slew_data: RW<u32>,
pub ddriob_drive_slew_diff: RW<u32>,
pub ddriob_drive_slew_clock: RW<u32>,
pub ddriob_ddr_ctrl: DdriobDdrCtrl,
pub ddriob_dci_ctrl: DdriobDciCtrl,
pub ddriob_dci_status: DdriobDciStatus,
}
@ -463,6 +503,23 @@ mio_pin_register!(mio_pin_53, MioPin53);
register!(gpiob_ctrl, GpiobCtrl, RW, u32);
register_bit!(gpiob_ctrl, vref_en, 0);
register!(ddriob_config, DdriobConfig, RW, u32);
register_bits_typed!(ddriob_config, inp_type, u8, DdriobInputType, 1, 2);
register_bit!(ddriob_config, dci_update_b, 3);
register_bit!(ddriob_config, term_en, 4);
register_bits_typed!(ddriob_config, dci_type, u8, DdriobDciType, 5, 6);
register_bit!(ddriob_config, ibuf_disable_mode, 7);
register_bit!(ddriob_config, term_disable_mode, 8);
register_bits_typed!(ddriob_config, output_en, u8, DdriobOutputEn, 9, 10);
register_bit!(ddriob_config, pullup_en, 11);
register!(ddriob_ddr_ctrl, DdriobDdrCtrl, RW, u32);
register_bit!(ddriob_ddr_ctrl, vref_int_en, 1);
register_bits_typed!(ddriob_ddr_ctrl, vref_sel, u8, DdriobVrefSel, 1, 4);
register_bit!(ddriob_ddr_ctrl, vref_ext_en_lower, 5);
register_bit!(ddriob_ddr_ctrl, vref_ext_en_upper, 6);
register_bit!(ddriob_ddr_ctrl, refio_en, 9);
register!(ddriob_dci_ctrl, DdriobDciCtrl, RW, u32);
register_bit!(ddriob_dci_ctrl, reset, 0);
register_bit!(ddriob_dci_ctrl, enable, 0);