newell
/
zynq-rs
forked from M-Labs/zynq-rs
1
0
Fork 0
Code Pull Requests Activity

flake: update dependicies (fix rebase)

This commit is contained in:
newell 2024-09-30 08:37:50 -07:00
parent db22dafe28
commit 7213cfb1f8
5 changed files with 16 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
libboard_zynq/src/ddr/mod.rs
View File

@ -249,9 +249,9 @@ impl DdrRam {
#[cfg(feature = "target_ebaz4205")]
self.regs.dram_param0.write(
regs::DramParam0::zeroed()
.t_rc(0x1a)
.t_rfc_min(0x56)
.post_selfref_gap_x32(0x10)
.t_rc(0x1a) // 48.75 ns / 1.875 ns = 26 clock cycles
.t_rfc_min(0x56) // 160 ns / 1.875 ns = 85.333 --> 86 clock cycles
.post_selfref_gap_x32(0x10) // Default value
);
#[cfg(feature = "target_redpitaya")]
self.regs.dram_param0.write(
@ -270,8 +270,8 @@ impl DdrRam {
#[cfg(feature = "target_ebaz4205")]
self.regs.dram_param1.modify(
|_, w| w
.t_faw(0x16)
.t_ras_min(0x13)
.t_faw(0x16) // 40 ns / 1.875 ns = 21.33 --> 22 clock cycles
.t_ras_min(0x13) // 35 ns / 1.875 ns = 18.66 --> 19 clock cycles
);
#[cfg(feature = "target_redpitaya")]
self.regs.dram_param1.modify(
@ -478,12 +478,11 @@ impl DdrRam {
let megabytes = 1023;
#[cfg(any(
feature = "target_coraz7",
feature = "target_ebaz4205",
feature = "target_redpitaya",
feature = "target_kasli_soc",
))]
let megabytes = 512;
#[cfg(feature = "target_ebaz4205")]
let megabytes = 256;
megabytes * 1024 * 1024
}

3
libboard_zynq/src/eth/phy/mod.rs
View File

@ -83,7 +83,7 @@ pub struct Phy {
const OUI_MARVELL: u32 = 0x005043;
const OUI_REALTEK: u32 = 0x000732;
const OUI_LANTIQ : u32 = 0x355969;
const OUI_ICPLUS : u32 = 0x0090c3;
const OUI_ICPLUS : u32 = 0x02430c;
//only change pages on Kasli-SoC's Marvel 88E11xx
#[cfg(feature="target_kasli_soc")]
@ -123,6 +123,7 @@ impl Phy {
// IP101G-DS-R01
model: 5,
rev: 4,
..
}) => true,
_ => false,
}

4
libconfig/src/net_settings.rs
View File

@ -55,6 +55,10 @@ pub fn get_addresses(cfg: &Config) -> NetAddresses {
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x55]);
#[cfg(feature = "target_redpitaya")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 55);
#[cfg(feature = "target_ebaz4205")]
let mut hardware_addr = EthernetAddress([0x02, 0x00, 0x00, 0x00, 0x00, 0x56]);
#[cfg(feature = "target_ebaz4205")]
let mut ipv4_addr = IpAddress::v4(192, 168, 1, 56);
#[cfg(feature = "target_kasli_soc")]
let mut hardware_addr = get_address_from_eeprom();
#[cfg(feature = "target_kasli_soc")]

2
openocd/ebaz4205.cfg
View File

@ -4,7 +4,7 @@ adapter driver ftdi
ftdi vid_pid 0x0403 0x6010
ftdi channel 0
# Every pin set as high impedance except TCK, TDI, TDO and TMS
ftdi layout_init 0x0088 0x008b
ftdi layout_init 0x0008 0x000b
# nSRST defined on pin CN2-13 of the MiniModule (pin ADBUS5 [AD5] on the FT2232H chip)
# This choice is arbitrary. Use other GPIO pin if desired.