run with the cora z7-10

Cargo.toml

@@ -12,6 +12,11 @@ lto = false
 panic = "abort"
 debug = true
 
+[features]
+target_zc706 = []
+target_cora_z7_10 = []
+default = ["target_zc706"]
+
 [dependencies]
 panic-abort = "0.3"
 r0 = "0.2"

README.md

@@ -1,7 +1,15 @@
-# Debugging
+# Build
+
+```shell
+nix-shell --command "cargo build --release"
+```
+
+# Debug
 
 ## Using the Xilinx toolchain
 
+Tested with the ZC706 board.
+
 Run the Xilinx Microprocessor Debugger:
 ```shell
 /opt/Xilinx/14.7/ISE_DS/EDK/bin/lin64/xmd
@@ -26,5 +34,16 @@ target remote :1234
 
 Proceed using gdb with `load`, `c`
 
-## Using OpenOCD: not working
+## Using OpenOCD
 
+### Resources for the ZC706
+
+https://devel.rtems.org/wiki/Debugging/OpenOCD/Xilinx_Zynq
+https://github.com/nathanrossi/meta-random/tree/master/openocd-zynq
+
+### Running on the Cora Z7-10
+
+```shell
+nix-shell --command "cargo build --release --no-default-features --features=target_cora_z7_10"
+openocd -f cora-z7-10.cfg
+```

cora-z7-10.cfg

@@ -0,0 +1,49 @@
+source [find interface/ftdi/digilent-hs1.cfg]
+source [find target/zynq_7000.cfg]
+
+set _TARGETNAME_0 "zynq.cpu0"
+set _TARGETNAME_1 "zynq.cpu1"
+set _SMP 1
+
+proc zynq_restart { wait } {
+    global _SMP
+    global _TARGETNAME_0
+    global _TARGETNAME_1
+    set target0 $_TARGETNAME_0
+    set target1 $_TARGETNAME_1
+    echo "Zynq reset, resetting the board ... "
+    poll off
+    #
+    # Issue the reset via the SLCR
+    #
+    catch {
+        mww phys 0xF8000008 0xDF0D
+        mww phys 0xF8000200 1
+    }
+    echo "Zynq reset waiting for $wait msecs ... "
+    sleep $wait
+    #
+    # Reconnect the DAP etc due to the reset.
+    #
+    $target0 cortex_a dbginit
+    $target0 arm core_state arm
+    if { $_SMP } {
+        $target1 arm core_state arm
+        $target1 cortex_a dbginit
+        cortex_a smp_off
+    }
+    poll on
+    #
+    # We can now halt the core.
+    #
+    if { $_SMP } {
+        targets $target1
+        halt
+    }
+    targets $target0
+    halt
+    #zynq_rtems_setup
+}
+
+init
+zynq_restart 100

src/main.rs

@@ -72,7 +72,7 @@ fn l1_cache_init() {
 }
 
 fn main() {
-    let mut uart = Uart::uart1(115_200);
+    let mut uart = Uart::serial(115_200);
     loop {
         for i in 0.. {
             writeln!(uart, "i={}\r", i);

src/uart/mod.rs

@@ -9,23 +9,25 @@ mod baud_rate_gen;
 
 /// Determined through experimentation. Actually supposed to be
 /// 1 GHz (IO PLL) / 0x14 (slcr.UART_CLK_CTRL[DIVISOR]) = 50 MHz.
+#[cfg(feature = "target_zc706")]
 const UART_REF_CLK: u32 = 45_000_000;
+#[cfg(feature = "target_cora_z7_10")]
+const UART_REF_CLK: u32 = 66_000_000;
 
 pub struct Uart {
     regs: &'static mut regs::RegisterBlock,
 }
 
 impl Uart {
-    pub fn uart1(baudrate: u32) -> Self {
+    #[cfg(feature = "target_zc706")]
+    pub fn serial(baudrate: u32) -> Self {
         slcr::RegisterBlock::unlocked(|slcr| {
-            slcr.uart_rst_ctrl.reset_uart1();
-
             // Route UART 1 RxD/TxD Signals to MIO Pins
             // TX pin
             slcr.mio_pin_48.write(
                 slcr::MioPin48::zeroed()
                     .l3_sel(0b111)
-                    .io_type(0b001)
+                    .io_type(slcr::IoBufferType::Lvcmos18)
                     .pullup(true)
             );
             // RX pin
@@ -33,10 +35,52 @@ impl Uart {
                 slcr::MioPin49::zeroed()
                     .tri_enable(true)
                     .l3_sel(0b111)
-                    .io_type(0b001)
+                    .io_type(slcr::IoBufferType::Lvcmos18)
                     .pullup(true)
             );
+        });
+        Self::uart1(baudrate)
+    }
 
+    #[cfg(feature = "target_cora_z7_10")]
+    pub fn serial(baudrate: u32) -> Self {
+        slcr::RegisterBlock::unlocked(|slcr| {
+            // Route UART 0 RxD/TxD Signals to MIO Pins
+            // TX pin
+            slcr.mio_pin_15.write(
+                slcr::MioPin15::zeroed()
+                    .l3_sel(0b111)
+                    .io_type(slcr::IoBufferType::Lvcmos33)
+                    .pullup(true)
+            );
+            // RX pin
+            slcr.mio_pin_14.write(
+                slcr::MioPin14::zeroed()
+                    .tri_enable(true)
+                    .l3_sel(0b111)
+                    .io_type(slcr::IoBufferType::Lvcmos33)
+                    .pullup(true)
+            );
+        });
+        Self::uart0(baudrate)
+    }
+
+    pub fn uart0(baudrate: u32) -> Self {
+        slcr::RegisterBlock::unlocked(|slcr| {
+            slcr.uart_rst_ctrl.reset_uart0();
+            slcr.aper_clk_ctrl.enable_uart0();
+            slcr.uart_clk_ctrl.enable_uart0();
+        });
+        let mut self_ = Uart {
+            regs: regs::RegisterBlock::uart0(),
+        };
+        self_.configure(baudrate);
+        self_
+    }
+
+    pub fn uart1(baudrate: u32) -> Self {
+        slcr::RegisterBlock::unlocked(|slcr| {
+            slcr.uart_rst_ctrl.reset_uart1();
             slcr.aper_clk_ctrl.enable_uart1();
             slcr.uart_clk_ctrl.enable_uart1();
         });