1
0
Fork 0

add consequence of not following polarity

This commit is contained in:
morgan 2024-01-12 16:47:43 +08:00
parent bcb3faf080
commit 6390f2b12f
2 changed files with 2 additions and 2 deletions

View File

@ -2,7 +2,7 @@
## Mounting fan onto heatsink ## Mounting fan onto heatsink
![](../img/kasli_fan.jpg) ![](../img/kasli_fan.jpg)
1. ⚠️ Verify the fan has the **correct polarity** 1. ⚠️ Verify the fan has the **correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)**
2. Place the fan on a heatsink 2. Place the fan on a heatsink
3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws) 3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws)
4. Replace the tapping screws with M2.5x14mm screws 4. Replace the tapping screws with M2.5x14mm screws

View File

@ -9,7 +9,7 @@ POR jumper needs only for JTAG mode.
## Mounting fan onto heatsink ## Mounting fan onto heatsink
![](../img/kasli_soc_fan.jpg) ![](../img/kasli_soc_fan.jpg)
1. ⚠️ Verify the fan has the **correct polarity** 1. ⚠️ Verify the fan has the **correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)**
2. Place the fan on a heatsink 2. Place the fan on a heatsink
3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws) 3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws)
4. Replace the tapping screws with M2.5x14mm screws 4. Replace the tapping screws with M2.5x14mm screws