From 6390f2b12f47f0470b14cd5b3829d013ac9dc17b Mon Sep 17 00:00:00 2001 From: morgan Date: Fri, 12 Jan 2024 16:47:43 +0800 Subject: [PATCH] add consequence of not following polarity --- src/hw/kasli.md | 2 +- src/hw/kasli_soc.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/src/hw/kasli.md b/src/hw/kasli.md index 0ab5feb..b30fe9c 100644 --- a/src/hw/kasli.md +++ b/src/hw/kasli.md @@ -2,7 +2,7 @@ ## Mounting fan onto heatsink ![](../img/kasli_fan.jpg) -1. ⚠️ Verify the fan has the **correct polarity** +1. ⚠️ Verify the fan has the **correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)** 2. Place the fan on a heatsink 3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws) 4. Replace the tapping screws with M2.5x14mm screws diff --git a/src/hw/kasli_soc.md b/src/hw/kasli_soc.md index 920e941..253cb35 100644 --- a/src/hw/kasli_soc.md +++ b/src/hw/kasli_soc.md @@ -9,7 +9,7 @@ POR jumper needs only for JTAG mode. ## Mounting fan onto heatsink ![](../img/kasli_soc_fan.jpg) -1. ⚠️ Verify the fan has the **correct polarity** +1. ⚠️ Verify the fan has the **correct polarity (powering on with wrong polarity will burn the MOSFET in series💥)** 2. Place the fan on a heatsink 3. Tap 3 threads on the heatsink using M2.5 pointy tapping screws (e.g. front panel screws) 4. Replace the tapping screws with M2.5x14mm screws