artiq-zynq/src/gateware
morgan 2ea2b5e922 cxp downconn gw: add gtx up to 12.5Gbps
testing: add txusrclk mmcm & loopback mode
testing: add debug output
testing: send comma in the middle of long packet to maintain lock
downconn: don't put IDLE into fifo
downconn: add GTX and QPLL support
downconn: add DRP for GTX and QPLL to support all CXP linerates
GTX: add gtx with mmcm for TXUSRCLK freq requirement
GTX: add loopback mode parameter for testing
GTX: add gtx with 40bits internal width
GTX: use built-in comma aligner
GTX: add comma checker to ensure comma is aligner on highest linerate
GTX: set QPLL as CLK source for GTX
GTX: add multilane rx support with the same rx reseter
2024-12-12 11:49:54 +08:00
..
acpki.py acpki: working 2020-09-09 21:24:49 +08:00
analyzer.py analyzer: report AXI bus errors 2020-07-20 19:51:22 +08:00
config.py refactor write_rustc_cfg_file() 2023-09-11 11:48:19 +08:00
cxp_4r_fmc.py fmc: add cxp_4r_fmc adepter io 2024-12-04 16:08:47 +08:00
cxp_downconn.py cxp downconn gw: add gtx up to 12.5Gbps 2024-12-12 11:49:54 +08:00
cxp_rtio.py temp diagrams & unused sim 2024-12-04 16:08:47 +08:00
ddmtd.py DDMTD: replace 1st edge to median edge deglitcher 2024-04-29 13:05:02 +08:00
dma.py dma: report AXI bus error 2020-07-21 12:47:20 +08:00
drtio_aux_controller.py drtio_aux_controller: support aux_buffer_count 2024-04-24 17:12:39 +08:00
ebaz4205.py gateware: Add default TTLs to EBAZ4205 (#335) 2024-11-16 10:40:45 +08:00
endianness.py dma: fix endianness issues 2020-07-16 17:27:08 +08:00
kasli_soc.py allow toggling SED spread with flash config key 2024-07-09 18:11:20 +08:00
test_dma.py RTIO/SYS Clock merge 2023-02-17 15:52:43 +08:00
zc706.py allow toggling SED spread with flash config key 2024-07-09 18:11:20 +08:00
zynq_clocking.py zynq_clocking: Allow ext signal to set cur_clk csr 2023-11-07 18:55:08 +08:00