drtio: add InjectionRequest to expects_response

flake: update dependencies
cargo fmt
2024-11-26 14:58:24 +08:00 · 2024-11-20 19:58:55 +08:00 · 2024-11-20 09:42:49 +08:00 · 2024-11-20 09:32:38 +08:00 · 2024-11-20 09:07:00 +08:00 · 2024-11-18 13:13:10 +08:00
39 changed files with 3766 additions and 1007 deletions
--- a/README.md
+++ b/README.md
@ -4,60 +4,102 @@ ARTIQ on Zynq
 How to use
 ----------

-1. Install the ARTIQ version that corresponds to the artiq-zynq version you are targeting.
-2. To obtain firmware binaries, select the latest successful build on [Hydra](https://nixbld.m-labs.hk/) for the targeted artiq-zynq version, or use AFWS. If using Hydra, search for the job named ``<board>-<variant>-sd`` (for example: ``zc706-nist_clock-sd`` or ``zc706-nist_qc2-sd``).
-3. Place the ``boot.bin`` file, obtained from Hydra's "binary distribution" download link or from AFWS, at the root of a FAT-formatted SD card.
-4. Optionally, create a ``config.txt`` configuration file at the root of the SD card containing ``key=value`` pairs on each line. Use the ``ip``, ``ip6`` and ``mac`` keys to respectively set the IPv4, IPv6 and MAC address of the board. Configuring an IPv6 address is entirely optional. If these keys are not found, the firmware will use default values that may or may not be compatible with your network.
-5. Insert the SD card into the board and set up the board to boot from the SD card. For the ZC706, this is achieved by placing the large DIP switch SW11 in the 00110 position.
-6. Power up the board. After the firmware starts successfully, it should respond to ping at its IP addresses, and boot messages can be observed from its UART at 115200bps.
-7. Create and use an ARTIQ device database as usual, but set ``"target": "cortexa9"`` in the arguments of the core device.
+1. [Install ARTIQ](https://m-labs.hk/artiq/manual/installing.html). Get the corresponding version to the ``artiq-zynq`` version you are targeting.
+2. To obtain firmware binaries, use AFWS or build your own; see [the ARTIQ manual](https://m-labs.hk/artiq/manual/building_developing.html) for detailed instructions or skip to "Development" below. ZC706 variants only can also be downloaded from latest successful build on [Hydra](https://nixbld.m-labs.hk/).
+3. Place ``boot.bin`` file at the root ``/`` of a FAT-formatted SD card.
+4. Optionally, create a ``config.txt`` configuration file containing ``key=value`` pairs on each line and place it at the root of the SD card. See below for valid keys. The ``ip``, ``ip6`` and ``mac`` keys can be used to set networking information. If these keys are not found, the firmware will use default values which may or may not be compatible with your network.
+5. Insert the SD card into the board and set the board to boot from the SD card. For ZC706, this is achieved by placing the large DIP switch SW11 into the 00110 position. On Kasli-SoC, place the BOOT MODE switches to SD.
+6. Power up the board. After successful boot the firmware should respond to ping at its IP addresses. Boot output can be observed from UART at 115200bps 8-N-1.
+7. Create and use an ARTIQ device database as usual.

 Configuration
 -------------

-Configuring the device is done using the ``config.txt`` text file at the root of the SD card, plus the contents of the ``config`` folder. When searching for a configuration key, the firmware first looks for a file named ``/config/[key].bin`` and, if it exists, returns the contents of that file. If not, it looks into ``/config.txt``, which contains a list of ``key=value`` pairs, one per line. The ``config`` folder allows configuration values that consist in binary data, such as the startup kernel.
+Configuring the device is done using the ``config.txt`` text file at the root of the SD card plus optionally a ``config`` folder. When searching for a configuration key, the firmware first looks for a file named ``/config/[key].bin`` and, if it exists, returns the contents of that file. If not, it looks into ``/config.txt``, which should contain a list of ``key=value`` pairs, one per line. ``config.txt`` should be used for most keys but the ``config`` folder allows for setting configuration values which consist of binary data, such as the startup kernel.

-The following configuration keys are available:
+The following configuration keys are available among others:

 - ``mac``: Ethernet MAC address.
 - ``ip``: IPv4 address.
 - ``ip6``: IPv6 address.
- ``startup``: startup kernel in ELF format (as produced by ``artiq_compile``).
+- ``idle_kernel``: idle kernel in ELF format (as produced by ``artiq_compile``).
+- ``startup_kernel``: startup kernel in ELF format (as produced by ``artiq_compile``).
 - ``rtio_clock``: source of RTIO clock; valid values are ``ext0_bypass`` and ``int_125``.
- ``boot``: SD card "boot.bin" file, for replacing the boot firmware/gateware. Write only.

-Configurations can be read/written/removed via ``artiq_coremgmt``. Config erase is
-not implemented as it seems not very useful.
+See [ARTIQ manual](https://m-labs.hk/artiq/manual-beta/core_device.html#configuration-storage) for full list. Configurations can be read/written/removed with ``artiq_coremgmt``. Config erase is not implemented, as it isn't particularly useful.
+
+For convenience, the ``boot`` key can be used with ``artiq_coremgmt`` and a ``boot.bin`` file to replace firmware/gateware in a running system. This key is read-only. When loading ``boot.bin`` onto the SD card directly, place it at the root and not in the ``config`` folder.

 Development instructions
 ------------------------

-ARTIQ on Zynq is packaged using the [Nix](https://nixos.org) Flakes system. Install Nix 2.8+ and enable flakes by adding ``experimental-features = nix-command flakes`` to ``nix.conf`` (e.g. ``~/.config/nix/nix.conf``).
+ARTIQ on Zynq is packaged using [Nix](https://nixos.org) Flakes. Install Nix 2.8+ and enable flakes by adding ``experimental-features = nix-command flakes`` to ``nix.conf`` (e.g. ``~/.config/nix/nix.conf``).

-Pure build with Nix and execution on a remote JTAG server:
+**Pure build with Nix:**

 ```shell
-nix build .#zc706-nist_clock-jtag  # or zc706-nist_qc2-jtag or zc706-nist_clock_satellite-jtag etc.
-./remote_run.sh
+nix build .#zc706-nist_clock-jtag  # or zc706-nist_qc2-jtag or zc706-nist_clock-sd or etc
 ```

-Impure incremental build and execution on a remote JTAG server:
+Run ``nix flake show`` to see all valid build targets. Targets suffixed with ``-jtag`` produce separate firmware and gateware files, intended for use in booting via JTAG server/Ethernet, e.g. ``./remote_run.sh -i`` with a remote JTAG server. Targets suffixed with ``-sd`` will produce ``boot.bin`` file suitable for SD card boot. ``-firmware`` and ``-gateware`` respectively build firmware and gateware only.
+
+The Kasli-SoC target requires a system description file as input. See ARTIQ manual for exact instructions or use incremental build.
+
+**Impure incremental build:**
+
+For boards with fixed variants, i.e. ZC706, etc. :

 ```shell
 nix develop
 cd src
-gateware/zc706.py -g ../build/gateware -V <variant> # build gateware
-make GWARGS="-V <variant>" <runtime/satman>    # build firmware
-cd ..
-./remote_run.sh -i
+gateware/<board>.py -g ../build/gateware -V <variant> # gateware
+make GWARGS="-V <variant>" <runtime/satman>    # firmware
+```
+
+For boards with system descriptions, i.e. Kasli-SoC, etc. :
+
+```shell
+nix develop
+cd src
+gateware/<board>.py -g ../build/gateware <description.json> # gateware
+make TARGET=<board> GWARGS="path/to/description.json" <runtime/satman> # firmware
+```
+
+``szl.elf`` can be obtained with:
+
+```shell
+nix build git+https://git.m-labs.hk/m-labs/zynq-rs#<board>-szl
+```
+
+To generate ``boot.bin`` use ``mkbootimage``, e.g.:
+
+```shell
+echo "the_ROM_image:
+    {
+        [bootloader]result/szl.elf
+        gateware/top.bit
+        firmware/armv7-none-eabihf/release/<runtime/satman>
+    }
+    EOF" >> boot.bif
+mkbootimage boot.bif boot.bin
 ```

 Notes:

 - The impure build process is also compatible with non-Nix systems.
- When calling make, you need to specify both the variant and firmware type.
 - Firmware type must be either ``runtime`` for DRTIO-less or DRTIO master variants, or ``satman`` for DRTIO satellite.
- If the board is connected to the local machine, use the ``local_run.sh`` script.
+- If the board is connected to the local machine by JTAG, use the ``local_run.sh`` script.
+- A known Xilinx hardware bug prevents repeatedly loading the bootloader over JTAG without a POR reset. If booting over JTAG, install a jumper on ``PS_POR_B`` and use the POR reset script [here](https://git.m-labs.hk/M-Labs/zynq-rs/src/branch/master/kasli_soc_por.py).
+
+Pre-Commit Hooks
+----------------
+
+You are strongly recommended to use the provided pre-commit hooks to automatically reformat files and check for non-optimal Rust/C/C++ practices. Run `pre-commit install` to install the hook and `pre-commit` will automatically run `cargo fmt`, `cargo clippy`, and `clang-format` for you.
+
+Several things to note:
+
+- If `cargo fmt`, `cargo clippy`, or `clang-format` returns an error, the pre-commit hook will fail. You should fix all errors before trying to commit again.
+- If `cargo fmt` or `clang-format` reformats some files, the pre-commit hook will also fail. You should review the changes and, if satisfied, try to commit again.

 License
 -------
--- a/examples/ebaz4205/device_db.py
+++ b/examples/ebaz4205/device_db.py
@ -0,0 +1,78 @@
+core_addr = "192.168.1.57"
+
+device_db = {
+    "core": {
+        "type": "local",
+        "module": "artiq.coredevice.core",
+        "class": "Core",
+        "arguments": {
+            "host": core_addr,
+            "ref_period": 1e-9,
+            "target": "cortexa9",
+        },
+    },
+    "core_log": {
+        "type": "controller",
+        "host": "::1",
+        "port": 1068,
+        "command": "aqctl_corelog -p {port} --bind {bind} " + core_addr,
+    },
+    "core_moninj": {
+        "type": "controller",
+        "host": "::1",
+        "port_proxy": 1383,
+        "port": 1384,
+        "command": "aqctl_moninj_proxy --port-proxy {port_proxy} --port-control {port} --bind {bind} "
+        + core_addr,
+    },
+    "core_analyzer": {
+        "type": "controller",
+        "host": "::1",
+        "port_proxy": 1385,
+        "port": 1386,
+        "command": "aqctl_coreanalyzer_proxy --port-proxy {port_proxy} --port-control {port} --bind {bind} "
+        + core_addr,
+    },
+    "core_cache": {
+        "type": "local",
+        "module": "artiq.coredevice.cache",
+        "class": "CoreCache",
+    },
+    "core_dma": {"type": "local", "module": "artiq.coredevice.dma", "class": "CoreDMA"},
+    "led0": {
+        "type": "local",
+        "module": "artiq.coredevice.ttl",
+        "class": "TTLOut",
+        "arguments": {"channel": 0},
+    },
+    "led1": {
+        "type": "local",
+        "module": "artiq.coredevice.ttl",
+        "class": "TTLOut",
+        "arguments": {"channel": 1},
+    },
+}
+
+# TTLs starting at RTIO channel 2, ending at RTIO channel 15
+for i in range(2, 16):
+    device_db["ttl" + str(i)] = {
+        "type": "local",
+        "module": "artiq.coredevice.ttl",
+        "class": "TTLInOut",
+        "arguments": {"channel": i},
+    }
+
+device_db.update(
+    spi0={
+        "type": "local",
+        "module": "artiq.coredevice.spi2",
+        "class": "SPIMaster",
+        "arguments": {"channel": 16},
+    },
+    dds0={
+        "type": "local",
+        "module": "artiq.coredevice.ad9834",
+        "class": "AD9834",
+        "arguments": {"spi_device": "spi0"},
+    },
+)
--- a/flake.lock
+++ b/flake.lock
@ -3,19 +3,19 @@
    "artiq": {
      "inputs": {
        "artiq-comtools": "artiq-comtools",
-        "mozilla-overlay": "mozilla-overlay",
        "nixpkgs": "nixpkgs",
+        "rust-overlay": "rust-overlay",
        "sipyco": "sipyco",
        "src-migen": "src-migen",
        "src-misoc": "src-misoc",
        "src-pythonparser": "src-pythonparser"
      },
      "locked": {
-        "lastModified": 1714013217,
-        "narHash": "sha256-P0pVHTSgAkTYWFPjddcPhufe5oH8mjJAsxG8x8mo4NA=",
-        "ref": "master",
-        "rev": "7204feae1f504e4a1dcd54b95c59e8f36c62b701",
-        "revCount": 8776,
+        "lastModified": 1732066716,
+        "narHash": "sha256-krjvt9+RccnAxSEZcFhRpjA2S3CoqE4MSa1JUg421b4=",
+        "ref": "refs/heads/master",
+        "rev": "270a417a28b516d36983779a1adb6d33a3c55a4a",
+        "revCount": 9102,
        "type": "git",
        "url": "https://github.com/m-labs/artiq.git"
      },
@ -37,11 +37,11 @@
        ]
      },
      "locked": {
-        "lastModified": 1707216368,
-        "narHash": "sha256-ZXoqzG2QsVsybALLYXs473avXcyKSZNh2kIgcPo60XQ=",
+        "lastModified": 1720768567,
+        "narHash": "sha256-3VoK7o5MtHtbHLrc6Pv+eQWFtaz5Gd/YWyV5TD3c5Ss=",
        "owner": "m-labs",
        "repo": "artiq-comtools",
-        "rev": "e5d0204490bccc07ef9141b0d7c405ab01cb8273",
+        "rev": "f93570d8f2ed5a3cfb3e1c16ab00f2540551e994",
        "type": "github"
      },
      "original": {
@ -55,11 +55,11 @@
        "systems": "systems"
      },
      "locked": {
-        "lastModified": 1694529238,
-        "narHash": "sha256-zsNZZGTGnMOf9YpHKJqMSsa0dXbfmxeoJ7xHlrt+xmY=",
+        "lastModified": 1710146030,
+        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
        "owner": "numtide",
        "repo": "flake-utils",
-        "rev": "ff7b65b44d01cf9ba6a71320833626af21126384",
+        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
        "type": "github"
      },
      "original": {
@ -68,66 +68,18 @@
        "type": "github"
      }
    },
-    "mozilla-overlay": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1704373101,
-        "narHash": "sha256-+gi59LRWRQmwROrmE1E2b3mtocwueCQqZ60CwLG+gbg=",
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "rev": "9b11a87c0cc54e308fa83aac5b4ee1816d5418a2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "type": "github"
-      }
-    },
-    "mozilla-overlay_2": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1704373101,
-        "narHash": "sha256-+gi59LRWRQmwROrmE1E2b3mtocwueCQqZ60CwLG+gbg=",
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "rev": "9b11a87c0cc54e308fa83aac5b4ee1816d5418a2",
-        "type": "github"
-      },
-      "original": {
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "type": "github"
-      }
-    },
-    "mozilla-overlay_3": {
-      "flake": false,
-      "locked": {
-        "lastModified": 1695805681,
-        "narHash": "sha256-1ElPLD8eFfnuIk0G52HGGpRtQZ4QPCjChRlEOfkZ5ro=",
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "rev": "6eabade97bc28d707a8b9d82ad13ef143836736e",
-        "type": "github"
-      },
-      "original": {
-        "owner": "mozilla",
-        "repo": "nixpkgs-mozilla",
-        "type": "github"
-      }
-    },
    "nixpkgs": {
      "locked": {
-        "lastModified": 1711668574,
-        "narHash": "sha256-u1dfs0ASQIEr1icTVrsKwg2xToIpn7ZXxW3RHfHxshg=",
+        "lastModified": 1731319897,
+        "narHash": "sha256-PbABj4tnbWFMfBp6OcUK5iGy1QY+/Z96ZcLpooIbuEI=",
        "owner": "NixOS",
        "repo": "nixpkgs",
-        "rev": "219951b495fc2eac67b1456824cc1ec1fd2ee659",
+        "rev": "dc460ec76cbff0e66e269457d7b728432263166c",
        "type": "github"
      },
      "original": {
        "owner": "NixOS",
-        "ref": "nixos-23.11",
+        "ref": "nixos-unstable",
        "repo": "nixpkgs",
        "type": "github"
      }
@ -135,10 +87,53 @@
    "root": {
      "inputs": {
        "artiq": "artiq",
-        "mozilla-overlay": "mozilla-overlay_2",
        "zynq-rs": "zynq-rs"
      }
    },
+    "rust-overlay": {
+      "inputs": {
+        "nixpkgs": [
+          "artiq",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1719454714,
+        "narHash": "sha256-MojqG0lyUINkEk0b3kM2drsU5vyaF8DFZe/FAlZVOGs=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "d1c527659cf076ecc4b96a91c702d080b213801e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "ref": "snapshot/2024-08-01",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
+    "rust-overlay_2": {
+      "inputs": {
+        "nixpkgs": [
+          "zynq-rs",
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1719454714,
+        "narHash": "sha256-MojqG0lyUINkEk0b3kM2drsU5vyaF8DFZe/FAlZVOGs=",
+        "owner": "oxalica",
+        "repo": "rust-overlay",
+        "rev": "d1c527659cf076ecc4b96a91c702d080b213801e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "oxalica",
+        "ref": "snapshot/2024-08-01",
+        "repo": "rust-overlay",
+        "type": "github"
+      }
+    },
    "sipyco": {
      "inputs": {
        "nixpkgs": [
@ -147,11 +142,11 @@
        ]
      },
      "locked": {
-        "lastModified": 1708937641,
-        "narHash": "sha256-Hkb9VYFzFgkYxfbh4kYcDSn7DbMUYehoQDeTALrxo2Q=",
+        "lastModified": 1728371104,
+        "narHash": "sha256-PPnAyDedUQ7Og/Cby9x5OT9wMkNGTP8GS53V6N/dk4w=",
        "owner": "m-labs",
        "repo": "sipyco",
-        "rev": "4a28b311ce0069454b4e8fe1e6049db11b9f1296",
+        "rev": "094a6cd63ffa980ef63698920170e50dc9ba77fd",
        "type": "github"
      },
      "original": {
@ -163,11 +158,11 @@
    "src-migen": {
      "flake": false,
      "locked": {
-        "lastModified": 1702942348,
-        "narHash": "sha256-gKIfHZxsv+jcgDFRW9mPqmwqbZXuRvXefkZcSFjOGHw=",
+        "lastModified": 1727677091,
+        "narHash": "sha256-Zg3SQnTwMM/VkOGKogbPyuCC2NhLy8HB2SPEUWWNgCU=",
        "owner": "m-labs",
        "repo": "migen",
-        "rev": "50934ad10a87ade47219b796535978b9bdf24023",
+        "rev": "c19ae9f8ae162ffe2d310a92bfce53ac2a821bc8",
        "type": "github"
      },
      "original": {
@ -179,11 +174,11 @@
    "src-misoc": {
      "flake": false,
      "locked": {
-        "lastModified": 1699352904,
-        "narHash": "sha256-SglyTmXOPv8jJOjwAjJrj/WhAkItQfUbvKfUqrynwRg=",
+        "lastModified": 1729234629,
+        "narHash": "sha256-TLsTCXV5AC2xh+bS7EhBVBKqdqIU3eKrnlWcFF9LtAM=",
        "ref": "refs/heads/master",
-        "rev": "a53859f2167c31ab5225b6c09f30cf05527b94f4",
-        "revCount": 2452,
+        "rev": "6085a312bca26adeca6584e37d08c8ba2e1d6e38",
+        "revCount": 2460,
        "submodules": true,
        "type": "git",
        "url": "https://github.com/m-labs/misoc.git"
@ -227,18 +222,18 @@
    },
    "zynq-rs": {
      "inputs": {
-        "mozilla-overlay": "mozilla-overlay_3",
        "nixpkgs": [
          "artiq",
          "nixpkgs"
-        ]
+        ],
+        "rust-overlay": "rust-overlay_2"
      },
      "locked": {
-        "lastModified": 1711358419,
-        "narHash": "sha256-LzetYaLsnov9pHVWSCTSowXUAXkxemAa61CIMY98xsc=",
-        "ref": "master",
-        "rev": "195a21fe78e4dde1fd705cb2899ab5d2763ae037",
-        "revCount": 643,
+        "lastModified": 1731749494,
+        "narHash": "sha256-WGigAhvVCGN5YZ1dHPyvoqAh47W1Gtph036O1aKFlLE=",
+        "ref": "refs/heads/master",
+        "rev": "12975de2e110d7948bf47b768559f727d0abc8fc",
+        "revCount": 655,
        "type": "git",
        "url": "https://git.m-labs.hk/m-labs/zynq-rs"
      },
--- a/flake.nix
+++ b/flake.nix
@ -2,26 +2,26 @@
  description = "ARTIQ port to the Zynq-7000 platform";

  inputs.artiq.url = git+https://github.com/m-labs/artiq.git;
-  inputs.mozilla-overlay = { url = github:mozilla/nixpkgs-mozilla; flake = false; };
  inputs.zynq-rs.url = git+https://git.m-labs.hk/m-labs/zynq-rs;
  inputs.zynq-rs.inputs.nixpkgs.follows = "artiq/nixpkgs";

-  outputs = { self, mozilla-overlay, zynq-rs, artiq }:
+  outputs = { self, zynq-rs, artiq }:
  let
-    pkgs = import artiq.inputs.nixpkgs { system = "x86_64-linux"; overlays = [ (import mozilla-overlay) ]; };
+    pkgs = import artiq.inputs.nixpkgs { system = "x86_64-linux"; overlays = [ (import zynq-rs.inputs.rust-overlay) ]; };
    zynqpkgs = zynq-rs.packages.x86_64-linux;
    artiqpkgs = artiq.packages.x86_64-linux;
+    llvmPackages_11 = zynq-rs.llvmPackages_11;

    rust = zynq-rs.rust;
    rustPlatform = zynq-rs.rustPlatform;

    fastnumbers = pkgs.python3Packages.buildPythonPackage rec {
      pname = "fastnumbers";
-      version = "2.2.1";
+      version = "5.1.0";

      src = pkgs.python3Packages.fetchPypi {
        inherit pname version;
-        sha256 = "0j15i54p7nri6hkzn1wal9pxri4pgql01wgjccig6ar0v5jjbvsy";
+        sha256 = "sha256-4JLTP4uVwxcaL7NOV57+DFSwKQ3X+W/6onYkN2AdkKc=";
      };
    };

@ -74,7 +74,7 @@

      propagatedBuildInputs = with pkgs.python3Packages; [ setuptools click numpy toolz jinja2 ramda artiqpkgs.migen artiqpkgs.misoc ];

-      checkInputs = with pkgs.python3Packages; [ pytest-runner pytestCheckHook pytest-timeout ];
+      checkInputs = with pkgs.python3Packages; [ pytestCheckHook pytest-timeout ];

      # migen/misoc version checks are broken with pyproject for some reason
      postPatch = ''
@ -125,6 +125,7 @@
          lockFile = src/Cargo.lock;
          outputHashes = {
              "tar-no-std-0.1.8" = "sha256-xm17108v4smXOqxdLvHl9CxTCJslmeogjm4Y87IXFuM=";
+              "nalgebra-0.32.6" = "sha256-L/YudkVOtfGYoNQKBD7LMk/sMYgRDzPDdpGL5rO7G2I=";
            };
        };

@ -132,12 +133,12 @@
          pkgs.gnumake
          (pkgs.python3.withPackages(ps: [ ps.jsonschema artiqpkgs.migen migen-axi artiqpkgs.misoc artiqpkgs.artiq ]))
          zynqpkgs.cargo-xbuild
-          pkgs.llvmPackages_9.llvm
-          pkgs.llvmPackages_9.clang-unwrapped
+          llvmPackages_11.llvm
+          llvmPackages_11.clang-unwrapped
        ];
        buildPhase = ''
          export XARGO_RUST_SRC="${rust}/lib/rustlib/src/rust/library"
-          export CLANG_EXTRA_INCLUDE_DIR="${pkgs.llvmPackages_9.clang-unwrapped.lib}/lib/clang/9.0.1/include"
+          export CLANG_EXTRA_INCLUDE_DIR="${llvmPackages_11.clang-unwrapped.lib}/lib/clang/11.1.0/include"
          export CARGO_HOME=$(mktemp -d cargo-home.XXX)
          export ZYNQ_RS=${zynq-rs}
          make TARGET=${target} GWARGS="${if json == null then "-V ${variant}" else json}" ${fwtype}
@ -362,7 +363,8 @@
      (board-package-set { target = "zc706"; variant = "acpki_nist_qc2_satellite_100mhz"; }) //
      (board-package-set { target = "kasli_soc"; variant = "demo"; json = ./demo.json; }) //
      (board-package-set { target = "kasli_soc"; variant = "master"; json = ./kasli-soc-master.json; }) //
-      (board-package-set { target = "kasli_soc"; variant = "satellite"; json = ./kasli-soc-satellite.json; });
+      (board-package-set { target = "kasli_soc"; variant = "satellite"; json = ./kasli-soc-satellite.json; }) //
+      (board-package-set { target = "ebaz4205"; variant = "base"; });

    hydraJobs = packages.x86_64-linux // { inherit zc706-hitl-tests; inherit gateware-sim; inherit fmt-check; };

@ -370,8 +372,8 @@
      name = "artiq-zynq-dev-shell";
      buildInputs = with pkgs; [
        rust
-        llvmPackages_9.llvm
-        llvmPackages_9.clang-unwrapped
+        llvmPackages_11.llvm
+        llvmPackages_11.clang-unwrapped
        gnumake
        cacert
        zynqpkgs.cargo-xbuild
@ -382,9 +384,10 @@
        artiqpkgs.artiq
        artiqpkgs.vivado
        binutils-arm
+        pre-commit
      ];
      XARGO_RUST_SRC = "${rust}/lib/rustlib/src/rust/library";
-      CLANG_EXTRA_INCLUDE_DIR = "${pkgs.llvmPackages_9.clang-unwrapped.lib}/lib/clang/9.0.1/include";
+      CLANG_EXTRA_INCLUDE_DIR = "${llvmPackages_11.clang-unwrapped.lib}/lib/clang/11.1.0/include";
      ZYNQ_RS = "${zynq-rs}";
      OPENOCD_ZYNQ = "${zynq-rs}/openocd";
      SZL = "${zynqpkgs.szl}";
--- a/src/.clang-format
+++ b/src/.clang-format
@ -0,0 +1,32 @@
+BasedOnStyle: LLVM
+
+Language: Cpp
+Standard: Cpp11
+
+AccessModifierOffset: -1
+AlignEscapedNewlines: Left
+AlwaysBreakAfterReturnType: None
+AlwaysBreakTemplateDeclarations: Yes
+AllowAllParametersOfDeclarationOnNextLine: false
+AllowShortFunctionsOnASingleLine: Inline
+BinPackParameters: false
+BreakBeforeBinaryOperators: NonAssignment
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializers: AfterColon
+BreakInheritanceList: AfterColon
+ColumnLimit: 120
+ConstructorInitializerAllOnOneLineOrOnePerLine: true
+ContinuationIndentWidth: 4
+DerivePointerAlignment: false
+IndentCaseLabels: true
+IndentPPDirectives: None
+IndentWidth: 4
+MaxEmptyLinesToKeep: 1
+PointerAlignment: Left
+ReflowComments: true
+SortIncludes: false
+SortUsingDeclarations: true
+SpaceAfterTemplateKeyword: false
+SpacesBeforeTrailingComments: 2
+TabWidth: 4
+UseTab: Never
--- a/src/.clippy.toml
+++ b/src/.clippy.toml
@ -0,0 +1 @@
+doc-valid-idents = ["CPython", "NumPy", ".."]
--- a/src/.pre-commit-config.yaml
+++ b/src/.pre-commit-config.yaml
@ -0,0 +1,32 @@
+# See https://pre-commit.com for more information
+# See https://pre-commit.com/hooks.html for more hooks
+
+default_stages: [commit]
+
+repos:
+  - repo: local
+    hooks:
+      - id: cargo-fmt
+        name: artiq-zynq cargo format
+        entry: nix
+        language: system
+        types: [file, rust]
+        pass_filenames: false
+        description: Runs cargo fmt on the codebase.
+        args: [develop, -c, cargo, fmt, --manifest-path, src/Cargo.toml, --all]
+      - id: cargo-clippy
+        name: artiq-zynq cargo clippy
+        entry: nix
+        language: system
+        types: [file, rust]
+        pass_filenames: false
+        description: Runs cargo clippy on the codebase.
+        args: [develop, -c, cargo, clippy, --manifest-path, src/Cargo.toml, --tests]
+  - repo: https://github.com/pre-commit/mirrors-clang-format
+    rev: v19.1.0
+    hooks:
+      - id: clang-format
+        name: artiq-zynq clang-format
+        description: Runs clang-format on the codebase.
+        files: \.(cpp|h|hpp|c)$
+        args: [-style=file, -fallback-style=none, -assume-filename=src/.clang-format]
--- a/src/Cargo.lock
+++ b/src/Cargo.lock
@ -2,6 +2,15 @@
 # It is not intended for manual editing.
 version = 3

+[[package]]
+name = "approx"
+version = "0.5.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "cab112f0a86d568ea0e627cc1d6be74a1e9cd55214684db5561995f6dad897c6"
+dependencies = [
+ "num-traits",
+]
+
 [[package]]
 name = "arrayvec"
 version = "0.7.4"
@ -246,6 +255,7 @@ dependencies = [
 "libsupport_zynq",
 "log",
 "log_buffer",
+ "nalgebra",
 "nb 0.1.3",
 "unwind",
 "vcell",
@ -382,6 +392,19 @@ version = "0.7.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "c75de51135344a4f8ed3cfe2720dc27736f7711989703a0b43aadf3753c55577"

+[[package]]
+name = "nalgebra"
+version = "0.32.6"
+source = "git+https://git.m-labs.hk/M-Labs/nalgebra.git?rev=dd00f9b#dd00f9b46046e0b931d1b470166db02fd29591be"
+dependencies = [
+ "approx",
+ "num-complex",
+ "num-rational",
+ "num-traits",
+ "simba",
+ "typenum",
+]
+
 [[package]]
 name = "nb"
 version = "0.1.3"
@ -397,6 +420,15 @@ version = "1.0.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "546c37ac5d9e56f55e73b677106873d9d9f5190605e41a856503623648488cae"

+[[package]]
+name = "num-complex"
+version = "0.4.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "26873667bbbb7c5182d4a37c1add32cdf09f841af72da53318fdb81543c15085"
+dependencies = [
+ "num-traits",
+]
+
 [[package]]
 name = "num-derive"
 version = "0.3.3"
@ -408,6 +440,26 @@ dependencies = [
 "syn",
 ]

+[[package]]
+name = "num-integer"
+version = "0.1.46"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7969661fd2958a5cb096e56c8e1ad0444ac2bbcd0061bd28660485a44879858f"
+dependencies = [
+ "num-traits",
+]
+
+[[package]]
+name = "num-rational"
+version = "0.4.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "d41702bd167c2df5520b384281bc111a4b5efcf7fbc4c9c222c815b07e0a6a6a"
+dependencies = [
+ "autocfg",
+ "num-integer",
+ "num-traits",
+]
+
 [[package]]
 name = "num-traits"
 version = "0.2.15"
@ -415,8 +467,15 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "578ede34cf02f8924ab9447f50c28075b4d3e5b269972345e7e0372b38c6cdcd"
 dependencies = [
 "autocfg",
+ "libm",
 ]

+[[package]]
+name = "paste"
+version = "1.0.15"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "57c0d7b74b563b49d38dae00a0c37d4d6de9b432382b2892f0574ddcae73fd0a"
+
 [[package]]
 name = "pin-project-lite"
 version = "0.2.9"
@ -500,7 +559,9 @@ name = "satman"
 version = "0.0.0"
 dependencies = [
 "build_zynq",
+ "byteorder",
 "core_io",
+ "crc",
 "cslice",
 "embedded-hal",
 "io",
@ -523,6 +584,18 @@ version = "0.1.20"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "d4f410fedcf71af0345d7607d246e7ad15faaadd49d240ee3b24e5dc21a820ac"

+[[package]]
+name = "simba"
+version = "0.8.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "50582927ed6f77e4ac020c057f37a268fc6aebc29225050365aacbb9deeeddc4"
+dependencies = [
+ "approx",
+ "num-complex",
+ "num-traits",
+ "paste",
+]
+
 [[package]]
 name = "smoltcp"
 version = "0.7.5"
@ -555,6 +628,12 @@ dependencies = [
 "log",
 ]

+[[package]]
+name = "typenum"
+version = "1.17.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "42ff0bf0c66b8238c6f3b578df37d0b7848e55df8577b3f74f92a69acceeb825"
+
 [[package]]
 name = "unicode-ident"
 version = "1.0.5"
--- a/src/gateware/ebaz4205.py
+++ b/src/gateware/ebaz4205.py
@ -0,0 +1,307 @@
+#!/usr/bin/env python
+
+import argparse
+
+import analyzer
+import dma
+from artiq.gateware import rtio
+from artiq.gateware.rtio.phy import spi2, ttl_simple
+from artiq.gateware.rtio.xilinx_clocking import fix_serdes_timing_path
+from config import write_csr_file, write_mem_file, write_rustc_cfg_file
+from migen import *
+from migen.build.generic_platform import IOStandard, Misc, Pins, Subsignal
+from migen.build.platforms import ebaz4205
+from migen_axi.integration.soc_core import SoCCore
+from misoc.interconnect.csr import *
+
+_ps = [
+    (
+        "ps",
+        0,
+        Subsignal("clk", Pins("E7"), IOStandard("LVCMOS33"), Misc("SLEW=FAST")),
+        Subsignal("por_b", Pins("C7"), IOStandard("LVCMOS33"), Misc("SLEW=FAST")),
+        Subsignal("srst_b", Pins("B10"), IOStandard("LVCMOS18"), Misc("SLEW=FAST")),
+    )
+]
+
+_ddr = [
+    (
+        "ddr",
+        0,
+        Subsignal(
+            "a",
+            Pins("N2 K2 M3 K3 M4 L1 L4 K4 K1 J4 F5 G4 E4 D4 F4"),
+            IOStandard("SSTL15"),
+        ),
+        Subsignal("ba", Pins("L5 R4 J5"), IOStandard("SSTL15")),
+        Subsignal("cas_n", Pins("P5"), IOStandard("SSTL15")),
+        Subsignal("cke", Pins("N3"), IOStandard("SSTL15")),
+        Subsignal("cs_n", Pins("N1"), IOStandard("SSTL15")),
+        Subsignal("ck_n", Pins("M2"), IOStandard("DIFF_SSTL15"), Misc("SLEW=FAST")),
+        Subsignal("ck_p", Pins("L2"), IOStandard("DIFF_SSTL15"), Misc("SLEW=FAST")),
+        # Pins "T1 Y1" not connected
+        Subsignal("dm", Pins("A1 F1"), IOStandard("SSTL15_T_DCI"), Misc("SLEW=FAST")),
+        Subsignal(
+            "dq",
+            Pins("C3 B3 A2 A4 D3 D1 C1 E1 E2 E3 G3 H3 J3 H2 H1 J1"),
+            # Pins "P1 P3 R3 R1 T4 U4 U2 U3 V1 Y3 W1 Y4 Y2 W3 V2 V3" not connected
+            IOStandard("SSTL15_T_DCI"),
+            Misc("SLEW=FAST"),
+        ),
+        Subsignal(
+            "dqs_n",
+            Pins("B2 F2"),  # Pins "T2 W4" not connected
+            IOStandard("DIFF_SSTL15_T_DCI"),
+            Misc("SLEW=FAST"),
+        ),
+        Subsignal(
+            "dqs_p",
+            Pins("C2 G2"),  # Pins "R2 W5" not connected
+            IOStandard("DIFF_SSTL15_T_DCI"),
+            Misc("SLEW=FAST"),
+        ),
+        Subsignal("vrn", Pins("G5"), IOStandard("SSTL15_T_DCI"), Misc("SLEW=FAST")),
+        Subsignal("vrp", Pins("H5"), IOStandard("SSTL15_T_DCI"), Misc("SLEW=FAST")),
+        Subsignal("drst_n", Pins("B4"), IOStandard("SSTL15"), Misc("SLEW=FAST")),
+        Subsignal("odt", Pins("N5"), IOStandard("SSTL15")),
+        Subsignal("ras_n", Pins("P4"), IOStandard("SSTL15")),
+        Subsignal("we_n", Pins("M5"), IOStandard("SSTL15")),
+    )
+]
+
+# Connector J3
+_i2c = [
+    (
+        "i2c",
+        0,
+        Subsignal("scl", Pins("U12"), IOStandard("LVCMOS33")),
+        Subsignal("sda", Pins("V13"), IOStandard("LVCMOS33")),
+    )
+]
+
+_spi = [
+    (
+        "spi",
+        0,
+        Subsignal("clk", Pins("V20")),
+        Subsignal("mosi", Pins("U20")),
+        Subsignal("cs_n", Pins("P19")),
+        IOStandard("LVCMOS33"),
+    )
+]
+
+
+# Connector DATA1
+def _create_ttl():
+    _ttl = []
+
+    for idx, elem in enumerate([x for x in range(5, 21) if x not in (10, 12)]):
+        _ttl.append(
+            ("ttl", idx, Pins("DATA1:DATA1-{}".format(elem)), IOStandard("LVCMOS33")),
+        )
+    return _ttl
+
+
+class EBAZ4205(SoCCore):
+    def __init__(self, rtio_clk=125e6, acpki=False):
+        self.acpki = acpki
+
+        platform = ebaz4205.Platform()
+        platform.toolchain.bitstream_commands.extend(
+            [
+                "set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
+            ]
+        )
+        platform.add_extension(_ps)
+        platform.add_extension(_ddr)
+        platform.add_extension(_i2c)
+        platform.add_extension(_spi)
+        platform.add_extension(_create_ttl())
+
+        gmii = platform.request("gmii")
+        platform.add_period_constraint(gmii.rx_clk, 10)
+        platform.add_period_constraint(gmii.tx_clk, 10)
+        platform.add_platform_command(
+            "set_property CLOCK_DEDICATED_ROUTE FALSE [get_nets gmii_tx_clk_IBUF]"
+        )
+
+        ident = self.__class__.__name__
+        if self.acpki:
+            ident = "acpki_" + ident
+        SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
+        fix_serdes_timing_path(platform)
+        self.config["RTIO_FREQUENCY"] = str(rtio_clk / 1e6)
+        platform.add_period_constraint(self.ps7.cd_sys.clk, 10)
+
+        self.comb += [
+            self.ps7.enet0.enet.gmii.tx_clk.eq(gmii.tx_clk),
+            self.ps7.enet0.enet.gmii.rx_clk.eq(gmii.rx_clk),
+        ]
+        self.clock_domains.cd_eth_rx = ClockDomain(reset_less=False)
+        self.clock_domains.cd_eth_tx = ClockDomain(reset_less=False)
+        self.comb += [
+            ClockSignal("eth_rx").eq(gmii.rx_clk),
+            ClockSignal("eth_tx").eq(gmii.tx_clk),
+        ]
+        self.sync.eth_tx += [
+            gmii.txd.eq(self.ps7.enet0.enet.gmii.txd),
+            gmii.tx_en.eq(self.ps7.enet0.enet.gmii.tx_en),
+        ]
+        self.sync.eth_rx += [
+            self.ps7.enet0.enet.gmii.rxd.eq(gmii.rxd),
+            self.ps7.enet0.enet.gmii.rx_dv.eq(gmii.rx_dv),
+        ]
+
+        # MDIO
+        mdio = platform.request("mdio")
+        self.comb += mdio.mdc.eq(self.ps7.enet0.enet.mdio.mdc)
+        self.specials += Instance(
+            "IOBUF",
+            i_I=self.ps7.enet0.enet.mdio.o,
+            io_IO=mdio.mdio,
+            o_O=self.ps7.enet0.enet.mdio.i,
+            i_T=~self.ps7.enet0.enet.mdio.t_n,
+        )
+
+        # I2C
+        i2c = self.platform.request("i2c")
+        self.specials += [
+            # SCL
+            Instance(
+                "IOBUF",
+                i_I=self.ps7.i2c0.scl.o,
+                io_IO=i2c.scl,
+                o_O=self.ps7.i2c0.scl.i,
+                i_T=~self.ps7.i2c0.scl.t_n,
+            ),
+            # SDA
+            Instance(
+                "IOBUF",
+                i_I=self.ps7.i2c0.sda.o,
+                io_IO=i2c.sda,
+                o_O=self.ps7.i2c0.sda.i,
+                i_T=~self.ps7.i2c0.sda.t_n,
+            ),
+        ]
+
+        self.rtio_channels = []
+        for i in (0, 1):
+            print("USER LED at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
+            user_led = self.platform.request("user_led", i)
+            phy = ttl_simple.Output(user_led)
+            self.submodules += phy
+            self.rtio_channels.append(rtio.Channel.from_phy(phy))
+
+        for i in range(14):
+            print("TTL at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
+            ttl = self.platform.request("ttl", i)
+            phy = ttl_simple.InOut(ttl)
+            self.submodules += phy
+            self.rtio_channels.append(rtio.Channel.from_phy(phy))
+
+        print("SPI at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
+        spi_phy = spi2.SPIMaster(platform.request("spi"))
+        self.submodules += spi_phy
+        self.rtio_channels.append(rtio.Channel.from_phy(spi_phy, ififo_depth=4))
+        self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
+        self.rtio_channels.append(rtio.LogChannel())
+
+        self.submodules.rtio_tsc = rtio.TSC(glbl_fine_ts_width=3)
+        self.submodules.rtio_core = rtio.Core(self.rtio_tsc, self.rtio_channels)
+        self.csr_devices.append("rtio_core")
+        if self.acpki:
+            import acpki
+
+            self.config["KI_IMPL"] = "acp"
+            self.submodules.rtio = acpki.KernelInitiator(
+                self.rtio_tsc,
+                bus=self.ps7.s_axi_acp,
+                user=self.ps7.s_axi_acp_user,
+                evento=self.ps7.event.o,
+            )
+            self.csr_devices.append("rtio")
+        else:
+            self.config["KI_IMPL"] = "csr"
+            self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
+            self.csr_devices.append("rtio")
+
+        self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
+        self.csr_devices.append("rtio_dma")
+
+        self.submodules.cri_con = rtio.CRIInterconnectShared(
+            [self.rtio.cri, self.rtio_dma.cri],
+            [self.rtio_core.cri],
+            enable_routing=True,
+        )
+        self.csr_devices.append("cri_con")
+
+        self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
+        self.csr_devices.append("rtio_moninj")
+
+        self.submodules.rtio_analyzer = analyzer.Analyzer(
+            self.rtio_tsc, self.rtio_core.cri, self.ps7.s_axi_hp1
+        )
+        self.csr_devices.append("rtio_analyzer")
+
+
+class BASE(EBAZ4205):
+    def __init__(self, rtio_clk, acpki):
+        EBAZ4205.__init__(self, rtio_clk, acpki)
+
+
+VARIANTS = {cls.__name__.lower(): cls for cls in [BASE]}
+
+
+def main():
+    parser = argparse.ArgumentParser(
+        description="ARTIQ port to the EBAZ4205 control card of Ebit E9+ BTC miner"
+    )
+    parser.add_argument(
+        "-r", default=None, help="build Rust interface into the specified file"
+    )
+    parser.add_argument(
+        "-m", default=None, help="build Rust memory interface into the specified file"
+    )
+    parser.add_argument(
+        "-c",
+        default=None,
+        help="build Rust compiler configuration into the specified file",
+    )
+    parser.add_argument(
+        "-g", default=None, help="build gateware into the specified directory"
+    )
+    parser.add_argument("--rtio-clk", default=125e6, help="RTIO Clock Frequency (Hz)")
+    parser.add_argument(
+        "-V",
+        "--variant",
+        default="base",
+        help="variant: " "[acpki_]base" "(default: %(default)s)",
+    )
+    args = parser.parse_args()
+
+    rtio_clk = int(args.rtio_clk)
+    variant = args.variant.lower()
+    acpki = variant.startswith("acpki_")
+    if acpki:
+        variant = variant[6:]
+
+    try:
+        cls = VARIANTS[variant]
+    except KeyError:
+        raise SystemExit("Invalid variant (-V/--variant)")
+
+    soc = cls(rtio_clk=rtio_clk, acpki=acpki)
+    soc.finalize()
+
+    if args.r is not None:
+        write_csr_file(soc, args.r)
+    if args.m is not None:
+        write_mem_file(soc, args.m)
+    if args.c is not None:
+        write_rustc_cfg_file(soc, args.c)
+    if args.g is not None:
+        soc.build(build_dir=args.g)
+
+
+if __name__ == "__main__":
+    main()
--- a/src/gateware/kasli_soc.py
+++ b/src/gateware/kasli_soc.py
@ -20,13 +20,13 @@ from artiq.gateware.drtio.transceiver import gtx_7series, eem_serdes
 from artiq.gateware.drtio.siphaser import SiPhaser7Series
 from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
 from artiq.gateware.drtio import *
+from artiq.gateware.wrpll import wrpll

 import dma
 import analyzer
 import acpki
 import drtio_aux_controller
 import zynq_clocking
-import wrpll
 from config import write_csr_file, write_mem_file, write_rustc_cfg_file

 eem_iostandard_dict = {
@ -135,6 +135,7 @@ class GenericStandalone(SoCCore):
        ]
        fix_serdes_timing_path(platform)
        self.submodules.bootstrap = GTPBootstrapClock(self.platform, clk_freq)
+        self.config["RTIO_FREQUENCY"] = str(clk_freq/1e6)
        self.config["CLOCK_FREQUENCY"] = int(clk_freq)

        self.submodules.sys_crg = zynq_clocking.SYSCRG(self.platform, self.ps7, clk_synth_se_buf)
@ -145,7 +146,7 @@ class GenericStandalone(SoCCore):
        self.crg.cd_sys = self.sys_crg.cd_sys

        if with_wrpll:
-            self.submodules.wrpll_refclk = wrpll.SMAFrequencyMultiplier(platform.request("sma_clkin"))
+            self.submodules.wrpll_refclk = wrpll.FrequencyMultiplier(platform.request("sma_clkin"))
            self.submodules.wrpll = wrpll.WRPLL(
                platform=self.platform,
                cd_ref=self.wrpll_refclk.cd_ref,
@ -242,6 +243,7 @@ class GenericMaster(SoCCore):
            pads=data_pads,
            clk_freq=clk_freq)
        self.csr_devices.append("gt_drtio")
+        self.config["RTIO_FREQUENCY"] = str(clk_freq/1e6)
        self.config["CLOCK_FREQUENCY"] = int(clk_freq)

        txout_buf = Signal()
@ -273,7 +275,7 @@ class GenericMaster(SoCCore):
            clk_synth_se = Signal()
            platform.add_period_constraint(clk_synth.p, 8.0)
            self.specials += Instance("IBUFGDS", p_DIFF_TERM="TRUE", p_IBUF_LOW_PWR="FALSE", i_I=clk_synth.p, i_IB=clk_synth.n, o_O=clk_synth_se)
-            self.submodules.wrpll_refclk = wrpll.SMAFrequencyMultiplier(platform.request("sma_clkin"))
+            self.submodules.wrpll_refclk = wrpll.FrequencyMultiplier(platform.request("sma_clkin"))
            self.submodules.wrpll = wrpll.WRPLL(
                platform=self.platform,
                cd_ref=self.wrpll_refclk.cd_ref,
@ -558,7 +560,10 @@ class GenericSatellite(SoCCore):
        self.submodules.local_io = SyncRTIO(
            self.rtio_tsc, self.rtio_channels, lane_count=description["sed_lanes"]
        )
-        self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors)
+        self.comb += [
+            self.drtiosat.async_errors.eq(self.local_io.async_errors),
+            self.local_io.sed_spread_enable.eq(self.drtiosat.sed_spread_enable.storage)
+        ]

        self.submodules.cri_con = rtio.CRIInterconnectShared(
            [self.drtiosat.cri, self.rtio_dma.cri, self.rtio.cri],
--- a/src/gateware/si549.py
+++ b/src/gateware/si549.py
@ -1,277 +0,0 @@
-from migen import *
-from migen.genlib.fsm import *
-
-from misoc.interconnect.csr import *
-
-
-class I2CClockGen(Module):
-    def __init__(self, width):
-        self.load = Signal(width)
-        self.clk2x = Signal()
-
-        cnt = Signal.like(self.load)
-        self.comb += [
-            self.clk2x.eq(cnt == 0),
-        ]
-        self.sync += [
-            If(self.clk2x,
-                cnt.eq(self.load),
-            ).Else(
-                cnt.eq(cnt - 1),
-            )
-        ]
-
-
-class I2CMasterMachine(Module):
-    def __init__(self, clock_width):
-        self.scl = Signal(reset=1)
-        self.sda_o = Signal(reset=1)
-        self.sda_i = Signal()
-
-        self.submodules.cg = CEInserter()(I2CClockGen(clock_width))
-        self.start = Signal()
-        self.stop = Signal()
-        self.write = Signal()
-        self.ack = Signal()
-        self.data = Signal(8)
-        self.ready = Signal()
-
-        # # #
-
-        bits = Signal(4)
-        data = Signal(8)
-
-        fsm = CEInserter()(FSM("IDLE"))
-        self.submodules += fsm
-
-        fsm.act("IDLE",
-            self.ready.eq(1),
-            If(self.start,
-                NextState("START0"),
-            ).Elif(self.stop,
-                NextState("STOP0"),
-            ).Elif(self.write,
-                NextValue(bits, 8),
-                NextValue(data, self.data),
-                NextState("WRITE0")
-            )
-        )
-
-        fsm.act("START0",
-            NextValue(self.scl, 1),
-            NextState("START1")
-        )
-        fsm.act("START1",
-            NextValue(self.sda_o, 0),
-            NextState("IDLE")
-        )
-
-        fsm.act("STOP0",
-            NextValue(self.scl, 0),
-            NextState("STOP1")
-        )
-        fsm.act("STOP1",
-            NextValue(self.sda_o, 0),
-            NextState("STOP2")
-        )
-        fsm.act("STOP2",
-            NextValue(self.scl, 1), 
-            NextState("STOP3")
-        )
-        fsm.act("STOP3",
-            NextValue(self.sda_o, 1),
-            NextState("IDLE")
-        )
-
-        fsm.act("WRITE0",
-            NextValue(self.scl, 0),
-            NextState("WRITE1")
-        )
-        fsm.act("WRITE1",
-            If(bits == 0,
-                NextValue(self.sda_o, 1),
-                NextState("READACK0"),
-            ).Else(
-                NextValue(self.sda_o, data[7]),
-                NextState("WRITE2"),
-            )
-        )
-        fsm.act("WRITE2",
-            NextValue(self.scl, 1),
-            NextValue(data[1:], data[:-1]),
-            NextValue(bits, bits - 1),
-            NextState("WRITE0"),
-        )
-        fsm.act("READACK0",
-            NextValue(self.scl, 1),
-            NextState("READACK1"),
-        )
-        fsm.act("READACK1",
-            NextValue(self.ack, ~self.sda_i),
-            NextState("IDLE")
-        )
-
-        run = Signal()
-        idle = Signal()
-        self.comb += [
-            run.eq((self.start | self.stop | self.write) & self.ready),
-            idle.eq(~run & fsm.ongoing("IDLE")),
-            self.cg.ce.eq(~idle),
-            fsm.ce.eq(run | self.cg.clk2x),
-        ]
-
-
-class ADPLLProgrammer(Module):
-    def __init__(self):
-        self.i2c_divider = Signal(16)
-        self.i2c_address = Signal(7)
-
-        self.adpll = Signal(24)
-        self.stb = Signal()
-        self.busy = Signal()
-        self.nack = Signal()
-
-        self.scl = Signal()
-        self.sda_i = Signal()
-        self.sda_o = Signal()
-
-        # # #
-
-        master = I2CMasterMachine(16)
-        self.submodules += master
-
-        self.comb += [
-            master.cg.load.eq(self.i2c_divider),
-            self.scl.eq(master.scl),
-            master.sda_i.eq(self.sda_i),
-            self.sda_o.eq(master.sda_o)
-        ]
-
-        fsm = FSM()
-        self.submodules += fsm
-
-        fsm.act("IDLE",
-            If(self.stb,
-                NextValue(self.nack, 0),
-                NextState("START")
-            )
-        )
-        fsm.act("START",
-            master.start.eq(1),
-            If(master.ready, NextState("DEVADDRESS"))
-        )
-        fsm.act("DEVADDRESS",
-            master.data.eq(self.i2c_address << 1),
-            master.write.eq(1),
-            If(master.ready, NextState("REGADRESS"))
-        )
-        fsm.act("REGADRESS",
-            master.data.eq(231),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA0")
-                ).Else(
-                    NextValue(self.nack, 1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA0",
-            master.data.eq(self.adpll[0:8]),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA1")
-                ).Else(
-                    NextValue(self.nack, 1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA1",
-            master.data.eq(self.adpll[8:16]),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA2")
-                ).Else(
-                    NextValue(self.nack, 1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA2",
-            master.data.eq(self.adpll[16:24]),
-            master.write.eq(1),
-            If(master.ready,
-                If(~master.ack, NextValue(self.nack, 1)),
-                NextState("STOP")
-            )
-        )
-        fsm.act("STOP",
-            master.stop.eq(1),
-            If(master.ready,
-                If(~master.ack, NextValue(self.nack, 1)),
-                NextState("IDLE")
-            )
-        )
-
-        self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
-
-
-class Si549(Module, AutoCSR):
-    def __init__(self, pads):
-        self.i2c_divider = CSRStorage(16, reset=75)
-        self.i2c_address = CSRStorage(7)
-
-        self.adpll = CSRStorage(24)
-        self.adpll_stb = CSR()
-        self.adpll_busy = CSRStatus()
-        self.nack = CSRStatus()
-
-        self.bitbang_enable = CSRStorage()
-
-        self.sda_oe = CSRStorage()
-        self.sda_out = CSRStorage()
-        self.sda_in = CSRStatus()
-        self.scl_oe = CSRStorage()
-        self.scl_out = CSRStorage()
-
-        # # #
-
-        self.submodules.programmer = ADPLLProgrammer()
-
-        self.sync += self.programmer.stb.eq(self.adpll_stb.re)
-
-        self.comb += [
-            self.programmer.i2c_divider.eq(self.i2c_divider.storage),
-            self.programmer.i2c_address.eq(self.i2c_address.storage),
-            self.programmer.adpll.eq(self.adpll.storage),
-            self.adpll_busy.status.eq(self.programmer.busy),
-            self.nack.status.eq(self.programmer.nack)
-        ]
-
-        # I2C with bitbang/gateware mode select
-        sda_t = TSTriple(1)
-        scl_t = TSTriple(1)
-        self.specials += [
-            sda_t.get_tristate(pads.sda),
-            scl_t.get_tristate(pads.scl)
-        ]
-
-        self.comb += [
-            If(self.bitbang_enable.storage,
-                sda_t.oe.eq(self.sda_oe.storage),
-                sda_t.o.eq(self.sda_out.storage),
-                self.sda_in.status.eq(sda_t.i),
-                scl_t.oe.eq(self.scl_oe.storage),
-                scl_t.o.eq(self.scl_out.storage)
-            ).Else(
-                sda_t.oe.eq(~self.programmer.sda_o),
-                sda_t.o.eq(0),
-                self.programmer.sda_i.eq(sda_t.i),
-                scl_t.oe.eq(~self.programmer.scl),
-                scl_t.o.eq(0),
-            )
-        ]
--- a/src/gateware/wrpll.py
+++ b/src/gateware/wrpll.py
@ -1,237 +0,0 @@
-from migen import *
-from migen.genlib.cdc import MultiReg, AsyncResetSynchronizer, PulseSynchronizer
-from misoc.interconnect.csr import *
-from misoc.interconnect.csr_eventmanager import *
-
-from ddmtd import DDMTDSampler, DDMTD
-from si549 import Si549
-
-class FrequencyCounter(Module, AutoCSR):
-    def __init__(self, domains, counter_width=24):
-        self.update = CSR()
-        self.busy = CSRStatus()
-
-        counter_reset = Signal()
-        counter_stb = Signal()
-        timer = Signal(counter_width)
-
-        # # #
-
-        fsm = FSM()
-        self.submodules += fsm
-
-        fsm.act("IDLE",
-            counter_reset.eq(1),
-            If(self.update.re,
-                NextValue(timer, 2**counter_width - 1),
-                NextState("COUNTING")
-            )
-        )
-        fsm.act("COUNTING",
-            self.busy.status.eq(1),
-            If(timer != 0,
-                NextValue(timer, timer - 1)
-            ).Else( 
-                counter_stb.eq(1),
-                NextState("IDLE")
-            )
-        )
-
-        for domain in domains:
-            name = "counter_" + domain
-            counter_csr = CSRStatus(counter_width, name=name)
-            setattr(self, name, counter_csr)
-
-            divider = Signal(2)
-            divided = Signal()
-            divided_sys = Signal()
-            divided_sys_r = Signal()
-            divided_tick = Signal()
-            counter = Signal(counter_width)
-
-            # # #
-
-            sync_domain = getattr(self.sync, domain)
-            sync_domain +=[
-                divider.eq(divider + 1),
-                divided.eq(divider[-1])
-            ]
-            self.specials += MultiReg(divided, divided_sys)
-            self.sync += divided_sys_r.eq(divided_sys)
-            self.comb += divided_tick.eq(divided_sys & ~divided_sys_r)
-
-            self.sync += [
-                If(counter_stb, counter_csr.status.eq(counter)),
-                If(divided_tick, counter.eq(counter + 1)),
-                If(counter_reset, counter.eq(0))
-            ]
-
-class SkewTester(Module, AutoCSR):
-    def __init__(self, rx_synchronizer):
-        self.error = CSR()
-
-        # # #
-        
-        # The RX synchronizer is tested for setup/hold violations by feeding it a
-        # toggling pattern and checking that the same toggling pattern comes out.
-        toggle_in = Signal()
-        self.sync.rtio_rx0 += toggle_in.eq(~toggle_in)
-        toggle_out = rx_synchronizer.resync(toggle_in)
-
-        toggle_out_expected = Signal()
-        self.sync += toggle_out_expected.eq(~toggle_out)
-
-        error = Signal()
-        self.sync += [
-            If(toggle_out != toggle_out_expected, error.eq(1)),
-            If(self.error.re, error.eq(0))
-        ]
-        self.specials += MultiReg(error, self.error.w)
-
-
-class WRPLL(Module, AutoCSR):
-    def __init__(self, platform, cd_ref, main_clk_se, COUNTER_BIT=32):
-        self.helper_reset = CSRStorage(reset=1)
-        self.ref_tag = CSRStatus(COUNTER_BIT)
-        self.main_tag = CSRStatus(COUNTER_BIT)
-
-        ddmtd_counter = Signal(COUNTER_BIT)
-
-        ref_tag_sys = Signal(COUNTER_BIT)
-        main_tag_sys = Signal(COUNTER_BIT)
-        ref_tag_stb_sys = Signal()
-        main_tag_stb_sys = Signal()
-
-        # # #
-
-        self.submodules.main_dcxo = Si549(platform.request("ddmtd_main_dcxo_i2c"))
-        self.submodules.helper_dcxo = Si549(platform.request("ddmtd_helper_dcxo_i2c"))
-
-        helper_dcxo_pads = platform.request("ddmtd_helper_clk")
-        self.clock_domains.cd_helper = ClockDomain()
-        self.specials += [
-            Instance("IBUFGDS",
-                     i_I=helper_dcxo_pads.p, i_IB=helper_dcxo_pads.n,
-                     o_O=self.cd_helper.clk),
-            AsyncResetSynchronizer(self.cd_helper, self.helper_reset.storage)
-        ]
-
-        self.submodules.frequency_counter = FrequencyCounter(["sys", cd_ref.name])
-
-        self.submodules.ddmtd_sampler = DDMTDSampler(cd_ref, main_clk_se)
-
-        self.sync.helper += ddmtd_counter.eq(ddmtd_counter + 1)
-        self.submodules.ddmtd_ref = DDMTD(ddmtd_counter, self.ddmtd_sampler.ref_beating)
-        self.submodules.ddmtd_main = DDMTD(ddmtd_counter, self.ddmtd_sampler.main_beating)
-
-        # DDMTD tags collection
-
-        self.specials += [
-            MultiReg(self.ddmtd_ref.h_tag, ref_tag_sys),
-            MultiReg(self.ddmtd_main.h_tag, main_tag_sys)
-        ]
-
-        ref_tag_stb_ps = PulseSynchronizer("helper", "sys")
-        main_tag_stb_ps = PulseSynchronizer("helper", "sys")
-        self.submodules += [
-            ref_tag_stb_ps,
-            main_tag_stb_ps
-        ]
-        self.sync.helper += [
-            ref_tag_stb_ps.i.eq(self.ddmtd_ref.h_tag_update),
-            main_tag_stb_ps.i.eq(self.ddmtd_main.h_tag_update)
-        ]
-        self.sync += [
-            ref_tag_stb_sys.eq(ref_tag_stb_ps.o),
-            main_tag_stb_sys.eq(main_tag_stb_ps.o)
-        ]
-
-        self.sync += [
-            If(ref_tag_stb_sys,
-                self.ref_tag.status.eq(ref_tag_sys),
-            ),
-            If(main_tag_stb_sys,
-                self.main_tag.status.eq(main_tag_sys)
-            )
-        ]
-
-        # EventMangers for firmware interrupt
-
-        self.submodules.ref_tag_ev = EventManager()
-        self.ref_tag_ev.stb = EventSourcePulse()
-        self.ref_tag_ev.finalize()
-
-        self.submodules.main_tag_ev = EventManager()
-        self.main_tag_ev.stb = EventSourcePulse()
-        self.main_tag_ev.finalize()
-
-        self.sync += [
-            self.ref_tag_ev.stb.trigger.eq(ref_tag_stb_sys),
-            self.main_tag_ev.stb.trigger.eq(main_tag_stb_sys)
-        ]
-
-        self.submodules.ev = SharedIRQ(self.ref_tag_ev, self.main_tag_ev)
-
-
-class SMAFrequencyMultiplier(Module, AutoCSR):
-    def __init__(self, sma_clkin):
-        sma_clkin_se = Signal()
-        mmcm_locked = Signal()
-        mmcm_fb_clk = Signal()
-        ref_clk = Signal()
-        self.clock_domains.cd_ref = ClockDomain()
-        self.refclk_reset = CSRStorage(reset=1)
-
-        self.mmcm_bypass = CSRStorage()
-        self.mmcm_locked = CSRStatus()
-        self.mmcm_reset = CSRStorage(reset=1)
-
-        self.mmcm_daddr = CSRStorage(7)
-        self.mmcm_din = CSRStorage(16)
-        self.mmcm_dwen = CSRStorage()
-        self.mmcm_den = CSRStorage()
-        self.mmcm_dclk = CSRStorage()
-        self.mmcm_dout = CSRStatus(16)
-        self.mmcm_dready = CSRStatus()
-
-        # # #
-
-        self.specials += [
-            Instance("IBUFDS",
-                i_I=sma_clkin.p, i_IB=sma_clkin.n,
-                o_O=sma_clkin_se),
-            # MMCME2 is capable to accept 10MHz input while PLLE2 only support down to 19MHz input (DS191)
-            # The MMCME2 can be reconfiged during runtime using the Dynamic Reconfiguration Ports
-            Instance("MMCME2_ADV",
-                p_BANDWIDTH="HIGH",  # lower output jitter (see https://support.xilinx.com/s/question/0D52E00006iHqRqSAK)
-                o_LOCKED=self.mmcm_locked.status,
-                i_RST=self.mmcm_reset.storage,
-                
-                p_CLKIN1_PERIOD=8, # ns
-                i_CLKIN1=sma_clkin_se,
-                i_CLKINSEL=1,  # 1=CLKIN1 0=CLKIN2
-
-                # VCO @ 1.25GHz 
-                p_CLKFBOUT_MULT_F=10, p_DIVCLK_DIVIDE=1,
-                i_CLKFBIN=mmcm_fb_clk, o_CLKFBOUT=mmcm_fb_clk, 
-
-                # 125MHz for WRPLL
-                p_CLKOUT0_DIVIDE_F=10, p_CLKOUT0_PHASE=0.0, o_CLKOUT0=ref_clk,
-
-                # Dynamic Reconfiguration Ports
-                i_DADDR = self.mmcm_daddr.storage,
-                i_DI = self.mmcm_din.storage,
-                i_DWE = self.mmcm_dwen.storage,
-                i_DEN = self.mmcm_den.storage,
-                i_DCLK = self.mmcm_dclk.storage,
-                o_DO = self.mmcm_dout.status,
-                o_DRDY = self.mmcm_dready.status
-            ),
-            Instance("BUFGMUX",
-                i_I0=ref_clk,
-                i_I1=sma_clkin_se,
-                i_S=self.mmcm_bypass.storage,
-                o_O=self.cd_ref.clk
-            ),
-            AsyncResetSynchronizer(self.cd_ref, self.refclk_reset.storage),
-        ]
--- a/src/gateware/zc706.py
+++ b/src/gateware/zc706.py
@ -487,6 +487,10 @@ class _SatelliteBase(SoCCore):
        self.csr_devices.append("rtio_dma")

        self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
+        self.comb += [
+            self.drtiosat.async_errors.eq(self.local_io.async_errors),
+            self.local_io.sed_spread_enable.eq(self.drtiosat.sed_spread_enable.storage)
+        ]
        self.submodules.cri_con = rtio.CRIInterconnectShared(
            [self.drtiosat.cri, self.rtio_dma.cri, self.rtio.cri],
            [self.local_io.cri] + self.drtio_cri,
--- a/src/libboard_artiq/Cargo.toml.tpl
+++ b/src/libboard_artiq/Cargo.toml.tpl
@ -10,6 +10,7 @@ name = "libboard_artiq"
 [features]
 target_zc706 = ["libboard_zynq/target_zc706", "libconfig/target_zc706"]
 target_kasli_soc = ["libboard_zynq/target_kasli_soc", "libconfig/target_kasli_soc"]
+target_ebaz4205 = ["libboard_zynq/target_ebaz4205", "libconfig/target_ebaz4205"]
 calibrate_wrpll_skew = []

 [build-dependencies]
--- a/src/libboard_artiq/src/drtio_eem.rs
+++ b/src/libboard_artiq/src/drtio_eem.rs
@ -185,6 +185,24 @@ unsafe fn align_comma(timer: &mut GlobalTimer) {
    }
 }

+pub unsafe fn align_wordslip(timer: &mut GlobalTimer, trx_no: u8) -> bool {
+    pl::csr::eem_transceiver::transceiver_sel_write(trx_no);
+
+    for slip in 0..=1 {
+        pl::csr::eem_transceiver::wordslip_write(slip as u8);
+        timer.delay_us(1);
+        pl::csr::eem_transceiver::comma_align_reset_write(1);
+        timer.delay_us(100);
+
+        if pl::csr::eem_transceiver::comma_read() == 1 {
+            debug!("comma alignment completed with {} wordslip", slip);
+            return true;
+        }
+    }
+
+    false
+}
+
 pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
    for trx_no in 0..pl::csr::CONFIG_EEM_DRTIO_COUNT {
        unsafe {
@ -222,7 +240,6 @@ pub fn init(timer: &mut GlobalTimer, cfg: &Config) {

        unsafe {
            align_comma(timer);
-            pl::csr::eem_transceiver::rx_ready_write(1);
        }
    }
 }
--- a/src/libboard_artiq/src/drtioaux.rs
+++ b/src/libboard_artiq/src/drtioaux.rs
@ -1,9 +1,10 @@
+use core::slice;
+
 use core_io::{Error as IoError, ErrorKind as IoErrorKind};
 use crc;
 use io::{proto::{ProtoRead, ProtoWrite},
         Cursor};
 use libboard_zynq::{time::Milliseconds, timer::GlobalTimer};
-use libcortex_a9::asm::dmb;

 pub use crate::drtioaux_proto::Packet;
 use crate::{drtioaux_proto::Error as ProtocolError, mem::mem::DRTIOAUX_MEM, pl::csr::DRTIOAUX};
@ -56,19 +57,6 @@ pub fn has_rx_error(linkno: u8) -> bool {
    }
 }

-pub fn copy_work_buffer(src: *mut u32, dst: *mut u32, len: isize) {
-    // AXI writes must be 4-byte aligned (drtio proto doesn't care for that),
-    // and AXI burst reads/writes are not implemented yet in gateware
-    // thus the need for a work buffer for transmitting and copying it over
-    unsafe {
-        for i in 0..(len / 4) {
-            *dst.offset(i) = *src.offset(i);
-            //data memory barrier to prevent bursts
-            dmb();
-        }
-    }
-}
-
 fn receive<F, T>(linkno: u8, f: F) -> Result<Option<T>, Error>
 where F: FnOnce(&[u8]) -> Result<T, Error> {
    let linkidx = linkno as usize;
@ -76,13 +64,7 @@ where F: FnOnce(&[u8]) -> Result<T, Error> {
        if (DRTIOAUX[linkidx].aux_rx_present_read)() == 1 {
            let read_ptr = (DRTIOAUX[linkidx].aux_read_pointer_read)() as usize;
            let ptr = (DRTIOAUX_MEM[linkidx].base + DRTIOAUX_MEM[linkidx].size / 2 + read_ptr * 0x400) as *mut u32;
-            // work buffer to accomodate axi burst reads
-            // buffer at maximum proto packet size, not maximum gateware supported size
-            // to minimize copying time
-            const LEN: usize = 512;
-            let mut buf: [u8; LEN] = [0; LEN];
-            copy_work_buffer(ptr, buf.as_mut_ptr() as *mut u32, LEN as isize);
-            let result = f(&buf);
+            let result = f(slice::from_raw_parts(ptr as *mut u8, 0x400 as usize));
            (DRTIOAUX[linkidx].aux_rx_present_write)(1);
            Ok(Some(result?))
        } else {
@ -133,10 +115,7 @@ where F: FnOnce(&mut [u8]) -> Result<usize, Error> {
    unsafe {
        while (DRTIOAUX[linkno].aux_tx_read)() != 0 {}
        let ptr = DRTIOAUX_MEM[linkno].base as *mut u32;
-        // work buffer, works with unaligned mem access
-        let mut buf: [u8; 1024] = [0; 1024];
-        let len = f(&mut buf)?;
-        copy_work_buffer(buf.as_mut_ptr() as *mut u32, ptr, len as isize);
+        let len = f(slice::from_raw_parts_mut(ptr as *mut u8, 0x400 as usize))?;
        (DRTIOAUX[linkno].aux_tx_length_write)(len as u16);
        (DRTIOAUX[linkno].aux_tx_write)(1);
        Ok(())
--- a/src/libboard_artiq/src/drtioaux_async.rs
+++ b/src/libboard_artiq/src/drtioaux_async.rs
@ -1,3 +1,5 @@
+use core::slice;
+
 use core_io::{Error as IoError, ErrorKind as IoErrorKind};
 use crc;
 use io::{proto::{ProtoRead, ProtoWrite},
@ -8,7 +10,7 @@ use nb;
 use void::Void;

 pub use crate::drtioaux_proto::Packet;
-use crate::{drtioaux::{copy_work_buffer, has_rx_error, Error},
+use crate::{drtioaux::{has_rx_error, Error},
            mem::mem::DRTIOAUX_MEM,
            pl::csr::DRTIOAUX};

@ -40,13 +42,7 @@ where F: FnOnce(&[u8]) -> Result<T, Error> {
        if (DRTIOAUX[linkidx].aux_rx_present_read)() == 1 {
            let read_ptr = (DRTIOAUX[linkidx].aux_read_pointer_read)() as usize;
            let ptr = (DRTIOAUX_MEM[linkidx].base + DRTIOAUX_MEM[linkidx].size / 2 + read_ptr * 0x400) as *mut u32;
-            // work buffer to accomodate axi burst reads
-            // buffer at maximum proto packet size, not maximum gateware supported size
-            // to minimize required copying time
-            const LEN: usize = 512;
-            let mut buf: [u8; LEN] = [0; LEN];
-            copy_work_buffer(ptr, buf.as_mut_ptr() as *mut u32, LEN as isize);
-            let result = f(&buf);
+            let result = f(slice::from_raw_parts(ptr as *mut u8, 0x400 as usize));
            (DRTIOAUX[linkidx].aux_rx_present_write)(1);
            Ok(Some(result?))
        } else {
@ -106,10 +102,7 @@ where F: FnOnce(&mut [u8]) -> Result<usize, Error> {
    unsafe {
        let _ = block_async!(tx_ready(linkno)).await;
        let ptr = DRTIOAUX_MEM[linkno].base as *mut u32;
-        // work buffer, works with unaligned mem access
-        let mut buf: [u8; 1024] = [0; 1024];
-        let len = f(&mut buf)?;
-        copy_work_buffer(buf.as_mut_ptr() as *mut u32, ptr, len as isize);
+        let len = f(slice::from_raw_parts_mut(ptr as *mut u8, 0x400 as usize))?;
        (DRTIOAUX[linkno].aux_tx_length_write)(len as u16);
        (DRTIOAUX[linkno].aux_tx_write)(1);
        Ok(())
--- a/src/libboard_artiq/src/drtioaux_proto.rs
+++ b/src/libboard_artiq/src/drtioaux_proto.rs
@ -1,9 +1,11 @@
 use core_io::{Error as IoError, Read, Write};
 use io::proto::{ProtoRead, ProtoWrite};

+const MAX_PACKET: usize = 1024;
+
 // maximum size of arbitrary payloads
 // used by satellite -> master analyzer, subkernel exceptions
-pub const SAT_PAYLOAD_MAX_SIZE: usize  = /*max size*/512 - /*CRC*/4 - /*packet ID*/1 - /*last*/1 - /*length*/2;
+pub const SAT_PAYLOAD_MAX_SIZE: usize  = /*max size*/MAX_PACKET - /*CRC*/4 - /*packet ID*/1 - /*last*/1 - /*length*/2;
 // used by DDMA, subkernel program data (need to provide extra ID and destination)
 pub const MASTER_PAYLOAD_MAX_SIZE: usize = SAT_PAYLOAD_MAX_SIZE - /*source*/1 - /*destination*/1 - /*ID*/4;

@ -253,6 +255,7 @@ pub enum Packet {
        destination: u8,
        id: u32,
        run: bool,
+        timestamp: u64,
    },
    SubkernelLoadRunReply {
        destination: u8,
@ -265,12 +268,14 @@ pub enum Packet {
        exception_src: u8,
    },
    SubkernelExceptionRequest {
+        source: u8,
        destination: u8,
    },
    SubkernelException {
+        destination: u8,
        last: bool,
        length: u16,
-        data: [u8; SAT_PAYLOAD_MAX_SIZE],
+        data: [u8; MASTER_PAYLOAD_MAX_SIZE],
    },
    SubkernelMessage {
        source: u8,
@ -283,6 +288,77 @@ pub enum Packet {
    SubkernelMessageAck {
        destination: u8,
    },
+
+    CoreMgmtGetLogRequest {
+        destination: u8,
+        clear: bool,
+    },
+    CoreMgmtClearLogRequest {
+        destination: u8,
+    },
+    CoreMgmtSetLogLevelRequest {
+        destination: u8,
+        log_level: u8,
+    },
+    CoreMgmtSetUartLogLevelRequest {
+        destination: u8,
+        log_level: u8,
+    },
+    CoreMgmtConfigReadRequest {
+        destination: u8,
+        length: u16,
+        key: [u8; MASTER_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtConfigReadContinue {
+        destination: u8,
+    },
+    CoreMgmtConfigWriteRequest {
+        destination: u8,
+        last: bool,
+        length: u16,
+        data: [u8; MASTER_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtConfigRemoveRequest {
+        destination: u8,
+        length: u16,
+        key: [u8; MASTER_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtConfigEraseRequest {
+        destination: u8,
+    },
+    CoreMgmtRebootRequest {
+        destination: u8,
+    },
+    CoreMgmtAllocatorDebugRequest {
+        destination: u8,
+    },
+    CoreMgmtFlashRequest {
+        destination: u8,
+        payload_length: u32,
+    },
+    CoreMgmtFlashAddDataRequest {
+        destination: u8,
+        last: bool,
+        length: u16,
+        data: [u8; MASTER_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtDropLinkAck {
+        destination: u8,
+    },
+    CoreMgmtDropLink,
+    CoreMgmtGetLogReply {
+        last: bool,
+        length: u16,
+        data: [u8; SAT_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtConfigReadReply {
+        last: bool,
+        length: u16,
+        value: [u8; SAT_PAYLOAD_MAX_SIZE],
+    },
+    CoreMgmtReply {
+        succeeded: bool,
+    },
 }

 impl Packet {
@ -510,6 +586,7 @@ impl Packet {
                destination: reader.read_u8()?,
                id: reader.read_u32()?,
                run: reader.read_bool()?,
+                timestamp: reader.read_u64()?,
            },
            0xc5 => Packet::SubkernelLoadRunReply {
                destination: reader.read_u8()?,
@ -522,14 +599,17 @@ impl Packet {
                exception_src: reader.read_u8()?,
            },
            0xc9 => Packet::SubkernelExceptionRequest {
+                source: reader.read_u8()?,
                destination: reader.read_u8()?,
            },
            0xca => {
+                let destination = reader.read_u8()?;
                let last = reader.read_bool()?;
                let length = reader.read_u16()?;
-                let mut data: [u8; SAT_PAYLOAD_MAX_SIZE] = [0; SAT_PAYLOAD_MAX_SIZE];
+                let mut data: [u8; MASTER_PAYLOAD_MAX_SIZE] = [0; MASTER_PAYLOAD_MAX_SIZE];
                reader.read_exact(&mut data[0..length as usize])?;
                Packet::SubkernelException {
+                    destination: destination,
                    last: last,
                    length: length,
                    data: data,
@ -556,6 +636,115 @@ impl Packet {
                destination: reader.read_u8()?,
            },

+            0xd0 => Packet::CoreMgmtGetLogRequest {
+                destination: reader.read_u8()?,
+                clear: reader.read_bool()?,
+            },
+            0xd1 => Packet::CoreMgmtClearLogRequest {
+                destination: reader.read_u8()?,
+            },
+            0xd2 => Packet::CoreMgmtSetLogLevelRequest {
+                destination: reader.read_u8()?,
+                log_level: reader.read_u8()?,
+            },
+            0xd3 => Packet::CoreMgmtSetUartLogLevelRequest {
+                destination: reader.read_u8()?,
+                log_level: reader.read_u8()?,
+            },
+            0xd4 => {
+                let destination = reader.read_u8()?;
+                let length = reader.read_u16()?;
+                let mut key: [u8; MASTER_PAYLOAD_MAX_SIZE] = [0; MASTER_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut key[0..length as usize])?;
+                Packet::CoreMgmtConfigReadRequest {
+                    destination: destination,
+                    length: length,
+                    key: key,
+                }
+            }
+            0xd5 => Packet::CoreMgmtConfigReadContinue {
+                destination: reader.read_u8()?,
+            },
+            0xd6 => {
+                let destination = reader.read_u8()?;
+                let last = reader.read_bool()?;
+                let length = reader.read_u16()?;
+                let mut data: [u8; MASTER_PAYLOAD_MAX_SIZE] = [0; MASTER_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut data[0..length as usize])?;
+                Packet::CoreMgmtConfigWriteRequest {
+                    destination: destination,
+                    last: last,
+                    length: length,
+                    data: data,
+                }
+            }
+            0xd7 => {
+                let destination = reader.read_u8()?;
+                let length = reader.read_u16()?;
+                let mut key: [u8; MASTER_PAYLOAD_MAX_SIZE] = [0; MASTER_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut key[0..length as usize])?;
+                Packet::CoreMgmtConfigRemoveRequest {
+                    destination: destination,
+                    length: length,
+                    key: key,
+                }
+            }
+            0xd8 => Packet::CoreMgmtConfigEraseRequest {
+                destination: reader.read_u8()?,
+            },
+            0xd9 => Packet::CoreMgmtRebootRequest {
+                destination: reader.read_u8()?,
+            },
+            0xda => Packet::CoreMgmtAllocatorDebugRequest {
+                destination: reader.read_u8()?,
+            },
+            0xdb => Packet::CoreMgmtFlashRequest {
+                destination: reader.read_u8()?,
+                payload_length: reader.read_u32()?,
+            },
+            0xdc => {
+                let destination = reader.read_u8()?;
+                let last = reader.read_bool()?;
+                let length = reader.read_u16()?;
+                let mut data: [u8; MASTER_PAYLOAD_MAX_SIZE] = [0; MASTER_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut data[0..length as usize])?;
+                Packet::CoreMgmtFlashAddDataRequest {
+                    destination: destination,
+                    last: last,
+                    length: length,
+                    data: data,
+                }
+            }
+            0xdd => Packet::CoreMgmtDropLinkAck {
+                destination: reader.read_u8()?,
+            },
+            0xde => Packet::CoreMgmtDropLink,
+            0xdf => {
+                let last = reader.read_bool()?;
+                let length = reader.read_u16()?;
+                let mut data: [u8; SAT_PAYLOAD_MAX_SIZE] = [0; SAT_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut data[0..length as usize])?;
+                Packet::CoreMgmtGetLogReply {
+                    last: last,
+                    length: length,
+                    data: data,
+                }
+            }
+            0xe0 => {
+                let last = reader.read_bool()?;
+                let length = reader.read_u16()?;
+                let mut value: [u8; SAT_PAYLOAD_MAX_SIZE] = [0; SAT_PAYLOAD_MAX_SIZE];
+                reader.read_exact(&mut value[0..length as usize])?;
+                Packet::CoreMgmtConfigReadReply {
+                    last: last,
+                    length: length,
+                    value: value,
+                }
+            }
+            0xe1 => Packet::CoreMgmtReply {
+                succeeded: reader.read_bool()?,
+            },
+
            ty => return Err(Error::UnknownPacket(ty)),
        })
    }
@ -870,12 +1059,14 @@ impl Packet {
                destination,
                id,
                run,
+                timestamp,
            } => {
                writer.write_u8(0xc4)?;
                writer.write_u8(source)?;
                writer.write_u8(destination)?;
                writer.write_u32(id)?;
                writer.write_bool(run)?;
+                writer.write_u64(timestamp)?;
            }
            Packet::SubkernelLoadRunReply { destination, succeeded } => {
                writer.write_u8(0xc5)?;
@ -894,12 +1085,19 @@ impl Packet {
                writer.write_bool(with_exception)?;
                writer.write_u8(exception_src)?;
            }
-            Packet::SubkernelExceptionRequest { destination } => {
+            Packet::SubkernelExceptionRequest { source, destination } => {
                writer.write_u8(0xc9)?;
+                writer.write_u8(source)?;
                writer.write_u8(destination)?;
            }
-            Packet::SubkernelException { last, length, data } => {
+            Packet::SubkernelException {
+                destination,
+                last,
+                length,
+                data,
+            } => {
                writer.write_u8(0xca)?;
+                writer.write_u8(destination)?;
                writer.write_bool(last)?;
                writer.write_u16(length)?;
                writer.write_all(&data[0..length as usize])?;
@ -924,6 +1122,115 @@ impl Packet {
                writer.write_u8(0xcc)?;
                writer.write_u8(destination)?;
            }
+
+            Packet::CoreMgmtGetLogRequest { destination, clear } => {
+                writer.write_u8(0xd0)?;
+                writer.write_u8(destination)?;
+                writer.write_bool(clear)?;
+            }
+            Packet::CoreMgmtClearLogRequest { destination } => {
+                writer.write_u8(0xd1)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtSetLogLevelRequest { destination, log_level } => {
+                writer.write_u8(0xd2)?;
+                writer.write_u8(destination)?;
+                writer.write_u8(log_level)?;
+            }
+            Packet::CoreMgmtSetUartLogLevelRequest { destination, log_level } => {
+                writer.write_u8(0xd3)?;
+                writer.write_u8(destination)?;
+                writer.write_u8(log_level)?;
+            }
+            Packet::CoreMgmtConfigReadRequest {
+                destination,
+                length,
+                key,
+            } => {
+                writer.write_u8(0xd4)?;
+                writer.write_u8(destination)?;
+                writer.write_u16(length)?;
+                writer.write_all(&key[0..length as usize])?;
+            }
+            Packet::CoreMgmtConfigReadContinue { destination } => {
+                writer.write_u8(0xd5)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtConfigWriteRequest {
+                destination,
+                last,
+                length,
+                data,
+            } => {
+                writer.write_u8(0xd6)?;
+                writer.write_u8(destination)?;
+                writer.write_bool(last)?;
+                writer.write_u16(length)?;
+                writer.write_all(&data[0..length as usize])?;
+            }
+            Packet::CoreMgmtConfigRemoveRequest {
+                destination,
+                length,
+                key,
+            } => {
+                writer.write_u8(0xd7)?;
+                writer.write_u8(destination)?;
+                writer.write_u16(length)?;
+                writer.write_all(&key[0..length as usize])?;
+            }
+            Packet::CoreMgmtConfigEraseRequest { destination } => {
+                writer.write_u8(0xd8)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtRebootRequest { destination } => {
+                writer.write_u8(0xd9)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtAllocatorDebugRequest { destination } => {
+                writer.write_u8(0xda)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtFlashRequest {
+                destination,
+                payload_length,
+            } => {
+                writer.write_u8(0xdb)?;
+                writer.write_u8(destination)?;
+                writer.write_u32(payload_length)?;
+            }
+            Packet::CoreMgmtFlashAddDataRequest {
+                destination,
+                last,
+                length,
+                data,
+            } => {
+                writer.write_u8(0xdc)?;
+                writer.write_u8(destination)?;
+                writer.write_bool(last)?;
+                writer.write_u16(length)?;
+                writer.write_all(&data[..length as usize])?;
+            }
+            Packet::CoreMgmtDropLinkAck { destination } => {
+                writer.write_u8(0xdd)?;
+                writer.write_u8(destination)?;
+            }
+            Packet::CoreMgmtDropLink => writer.write_u8(0xde)?,
+            Packet::CoreMgmtGetLogReply { last, length, data } => {
+                writer.write_u8(0xdf)?;
+                writer.write_bool(last)?;
+                writer.write_u16(length)?;
+                writer.write_all(&data[0..length as usize])?;
+            }
+            Packet::CoreMgmtConfigReadReply { last, length, value } => {
+                writer.write_u8(0xe0)?;
+                writer.write_bool(last)?;
+                writer.write_u16(length)?;
+                writer.write_all(&value[0..length as usize])?;
+            }
+            Packet::CoreMgmtReply { succeeded } => {
+                writer.write_u8(0xe1)?;
+                writer.write_bool(succeeded)?;
+            }
        }
        Ok(())
    }
@ -941,6 +1248,8 @@ impl Packet {
            Packet::SubkernelLoadRunReply { destination, .. } => Some(*destination),
            Packet::SubkernelMessage { destination, .. } => Some(*destination),
            Packet::SubkernelMessageAck { destination } => Some(*destination),
+            Packet::SubkernelExceptionRequest { destination, .. } => Some(*destination),
+            Packet::SubkernelException { destination, .. } => Some(*destination),
            Packet::DmaPlaybackStatus { destination, .. } => Some(*destination),
            Packet::SubkernelFinished { destination, .. } => Some(*destination),
            _ => None,
@ -958,7 +1267,9 @@ impl Packet {
            | Packet::SubkernelLoadRunReply { .. }
            | Packet::SubkernelMessageAck { .. }
            | Packet::DmaPlaybackStatus { .. }
-            | Packet::SubkernelFinished { .. } => false,
+            | Packet::SubkernelFinished { .. }
+            | Packet::CoreMgmtDropLinkAck { .. }
+            | Packet::InjectionRequest { .. } => false,
            _ => true,
        }
    }
--- a/src/libdwarf/src/eh.rs
+++ b/src/libdwarf/src/eh.rs
@ -85,10 +85,7 @@ unsafe fn get_ttype_entry(
        encoding | DW_EH_PE_pcrel,
        ttype_base,
    )
-    .map(|v| match v {
-        ttype_base => None,
-        ttype_entry => Some(ttype_entry as *const u8),
-    })
+    .map(|v| (v != ttype_base).then(|| v as *const u8))
 }

 pub unsafe fn find_eh_action(
--- a/src/libio/cursor.rs
+++ b/src/libio/cursor.rs
@ -45,7 +45,10 @@ impl<T: AsRef<[u8]>> Read for Cursor<T> {
    fn read(&mut self, buf: &mut [u8]) -> Result<usize, IoError> {
        let data = &self.inner.as_ref()[self.pos..];
        let len = buf.len().min(data.len());
-        buf[..len].copy_from_slice(&data[..len]);
+        // ``copy_from_slice`` generates AXI bursts, use a regular loop instead
+        for i in 0..len {
+            buf[i] = data[i];
+        }
        self.pos += len;
        Ok(len)
    }
@ -55,7 +58,9 @@ impl Write for Cursor<&mut [u8]> {
    fn write(&mut self, buf: &[u8]) -> Result<usize, IoError> {
        let data = &mut self.inner[self.pos..];
        let len = buf.len().min(data.len());
-        data[..len].copy_from_slice(&buf[..len]);
+        for i in 0..len {
+            data[i] = buf[i];
+        }
        self.pos += len;
        Ok(len)
    }
@ -68,7 +73,6 @@ impl Write for Cursor<&mut [u8]> {

 #[cfg(feature = "alloc")]
 impl Write for Cursor<Vec<u8>> {
-    #[inline]
    fn write(&mut self, buf: &[u8]) -> Result<usize, IoError> {
        self.inner.extend_from_slice(buf);
        Ok(buf.len())
--- a/src/libksupport/Cargo.toml.tpl
+++ b/src/libksupport/Cargo.toml.tpl
@ -32,3 +32,9 @@ unwind = { path = "../libunwind" }
 libc = { path = "../libc" }
 io = { path = "../libio" }
 libboard_artiq = { path = "../libboard_artiq" }
+
+[dependencies.nalgebra]
+git = "https://git.m-labs.hk/M-Labs/nalgebra.git"
+rev = "dd00f9b"
+default-features = false
+features = ["libm", "alloc"]
--- a/src/libksupport/src/eh_artiq.rs
+++ b/src/libksupport/src/eh_artiq.rs
@ -14,8 +14,10 @@

 use core::mem;

-use cslice::CSlice;
+use core_io::Error as ReadError;
+use cslice::{AsCSlice, CSlice};
 use dwarf::eh::{self, EHAction, EHContext};
+use io::{Cursor, ProtoRead};
 use libc::{c_int, c_void, uintptr_t};
 use log::{error, trace};
 use unwind as uw;
@ -220,8 +222,6 @@ pub unsafe fn artiq_personality(
 }

 pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
-    use cslice::AsCSlice;
-
    let count = EXCEPTION_BUFFER.exception_count;
    let stack = &mut EXCEPTION_BUFFER.exception_stack;
    let diff = exception as isize - EXCEPTION_BUFFER.exceptions.as_ptr() as isize;
@ -295,6 +295,60 @@ pub unsafe extern "C" fn raise(exception: *const Exception) -> ! {
    unreachable!();
 }

+fn read_exception_string<'a>(reader: &mut Cursor<&[u8]>) -> Result<CSlice<'a, u8>, ReadError> {
+    let len = reader.read_u32()? as usize;
+    if len == usize::MAX {
+        let data = reader.read_u32()?;
+        Ok(unsafe { CSlice::new(data as *const u8, len) })
+    } else {
+        let pos = reader.position();
+        let slice = unsafe {
+            let ptr = reader.get_ref().as_ptr().offset(pos as isize);
+            CSlice::new(ptr, len)
+        };
+        reader.set_position(pos + len);
+        Ok(slice)
+    }
+}
+
+fn read_exception(raw_exception: &[u8]) -> Result<Exception, ReadError> {
+    let mut reader = Cursor::new(raw_exception);
+
+    let mut byte = reader.read_u8()?;
+    // to sync
+    while byte != 0x5a {
+        byte = reader.read_u8()?;
+    }
+    // skip sync bytes, 0x09 indicates exception
+    while byte != 0x09 {
+        byte = reader.read_u8()?;
+    }
+    let _len = reader.read_u32()?;
+    // ignore the remaining exceptions, stack traces etc. - unwinding from another device would be unwise anyway
+    Ok(Exception {
+        id: reader.read_u32()?,
+        message: read_exception_string(&mut reader)?,
+        param: [
+            reader.read_u64()? as i64,
+            reader.read_u64()? as i64,
+            reader.read_u64()? as i64,
+        ],
+        file: read_exception_string(&mut reader)?,
+        line: reader.read_u32()?,
+        column: reader.read_u32()?,
+        function: read_exception_string(&mut reader)?,
+    })
+}
+
+pub fn raise_raw(raw_exception: &[u8]) -> ! {
+    use crate::artiq_raise;
+    if let Ok(exception) = read_exception(raw_exception) {
+        unsafe { raise(&exception) };
+    } else {
+        artiq_raise!("SubkernelError", "Error passing exception");
+    }
+}
+
 pub unsafe extern "C" fn resume() -> ! {
    trace!("resume");
    assert!(EXCEPTION_BUFFER.exception_count != 0);
@ -421,20 +475,30 @@ extern "C" fn stop_fn(
    }
 }

-// Must be kept in sync with preallocate_runtime_exception_names() in artiq/language/embedding_map.py
-static EXCEPTION_ID_LOOKUP: [(&str, u32); 12] = [
-    ("RuntimeError", 0),
-    ("RTIOUnderflow", 1),
-    ("RTIOOverflow", 2),
-    ("RTIODestinationUnreachable", 3),
-    ("DMAError", 4),
-    ("I2CError", 5),
-    ("CacheError", 6),
-    ("SPIError", 7),
-    ("ZeroDivisionError", 8),
-    ("IndexError", 9),
-    ("UnwrapNoneError", 10),
-    ("SubkernelError", 11),
+// Must be kept in sync with preallocate_runtime_exception_names() in `artiq.compiler.embedding`
+static EXCEPTION_ID_LOOKUP: [(&str, u32); 22] = [
+    ("RTIOUnderflow", 0),
+    ("RTIOOverflow", 1),
+    ("RTIODestinationUnreachable", 2),
+    ("DMAError", 3),
+    ("I2CError", 4),
+    ("CacheError", 5),
+    ("SPIError", 6),
+    ("SubkernelError", 7),
+    ("AssertionError", 8),
+    ("AttributeError", 9),
+    ("IndexError", 10),
+    ("IOError", 11),
+    ("KeyError", 12),
+    ("NotImplementedError", 13),
+    ("OverflowError", 14),
+    ("RuntimeError", 15),
+    ("TimeoutError", 16),
+    ("TypeError", 17),
+    ("ValueError", 18),
+    ("ZeroDivisionError", 19),
+    ("LinAlgError", 20),
+    ("UnwrapNoneError", 21),
 ];

 pub fn get_exception_id(name: &str) -> u32 {
@ -469,3 +533,29 @@ macro_rules! artiq_raise {
    }};
    ($name:expr, $message:expr) => {{ artiq_raise!($name, $message, 0, 0, 0) }};
 }
+
+/// Takes as input exception id from host
+/// Generates a new exception with:
+///   * `id` set to `exn_id`
+///   * `message` set to corresponding exception name from `EXCEPTION_ID_LOOKUP`
+///
+/// The message is matched on host to ensure correct exception is being referred
+/// This test checks the synchronization of exception ids for runtime errors
+#[no_mangle]
+pub extern "C" fn test_exception_id_sync(exn_id: u32) {
+    let message = EXCEPTION_ID_LOOKUP
+        .iter()
+        .find_map(|&(name, id)| if id == exn_id { Some(name) } else { None })
+        .unwrap_or("unallocated internal exception id");
+
+    let exn = Exception {
+        id: exn_id,
+        file: file!().as_c_slice(),
+        line: 0,
+        column: 0,
+        function: "test_exception_id_sync".as_c_slice(),
+        message: message.as_c_slice(),
+        param: [0, 0, 0],
+    };
+    unsafe { raise(&exn) };
+}
--- a/src/libksupport/src/kernel/api.rs
+++ b/src/libksupport/src/kernel/api.rs
@ -9,7 +9,7 @@ use log::{info, warn};
 use super::subkernel;
 use super::{cache,
            core1::rtio_get_destination_status,
-            dma,
+            dma, linalg,
            rpc::{rpc_recv, rpc_send, rpc_send_async}};
 use crate::{eh_artiq, i2c, rtio};

@ -303,6 +303,7 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
        api_libm_f64f64f64!(nextafter),
        api_libm_f64f64f64!(pow),
        api_libm_f64f64!(round),
+        api_libm_f64f64!(rint),
        api_libm_f64f64!(sin),
        api_libm_f64f64!(sinh),
        api_libm_f64f64!(sqrt),
@ -318,6 +319,26 @@ pub fn resolve(required: &[u8]) -> Option<u32> {
            }
            api!(yn = yn)
        },
+
+        // linalg
+        api!(np_linalg_cholesky = linalg::np_linalg_cholesky),
+        api!(np_linalg_qr = linalg::np_linalg_qr),
+        api!(np_linalg_svd = linalg::np_linalg_svd),
+        api!(np_linalg_inv = linalg::np_linalg_inv),
+        api!(np_linalg_pinv = linalg::np_linalg_pinv),
+        api!(np_linalg_matrix_power = linalg::np_linalg_matrix_power),
+        api!(np_linalg_det = linalg::np_linalg_det),
+        api!(sp_linalg_lu = linalg::sp_linalg_lu),
+        api!(sp_linalg_schur = linalg::sp_linalg_schur),
+        api!(sp_linalg_hessenberg = linalg::sp_linalg_hessenberg),
+
+        /*
+         * syscall for unit tests
+         * Used in `artiq.tests.coredevice.test_exceptions.ExceptionTest.test_raise_exceptions_kernel`
+         * This syscall checks that the exception IDs used in the Python `EmbeddingMap` (in `artiq.language.embedding`)
+         * match the `EXCEPTION_ID_LOOKUP` defined in the firmware (`libksupport::src::eh_artiq`)
+         */
+        api!(test_exception_id_sync = eh_artiq::test_exception_id_sync)
    ];
    api.iter()
        .find(|&&(exported, _)| exported.as_bytes() == required)
--- a/src/libksupport/src/kernel/linalg.rs
+++ b/src/libksupport/src/kernel/linalg.rs
@ -0,0 +1,440 @@
+// Uses `nalgebra` crate to invoke `np_linalg` and `sp_linalg` functions
+// When converting between `nalgebra::Matrix` and `NDArray` following considerations are necessary
+//
+// * Both `nalgebra::Matrix` and `NDArray` require their content to be stored in row-major order
+// * `NDArray` data pointer can be directly read and converted to `nalgebra::Matrix` (row and column number must be known)
+// * `nalgebra::Matrix::as_slice` returns the content of matrix in column-major order and initial data needs to be transposed before storing it in `NDArray` data pointer
+
+use alloc::vec::Vec;
+use core::slice;
+
+use nalgebra::DMatrix;
+
+use crate::artiq_raise;
+
+pub struct InputMatrix {
+    pub ndims: usize,
+    pub dims: *const usize,
+    pub data: *mut f64,
+}
+
+impl InputMatrix {
+    fn get_dims(&mut self) -> Vec<usize> {
+        let dims = unsafe { slice::from_raw_parts(self.dims, self.ndims) };
+        dims.to_vec()
+    }
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_cholesky(mat1: *mut InputMatrix, out: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out = out.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+    if dim1[0] != dim1[1] {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+
+    let outdim = out.get_dims();
+    let out_slice = slice::from_raw_parts_mut(out.data, outdim[0] * outdim[1]);
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+
+    let matrix1 = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let result = matrix1.cholesky();
+    match result {
+        Some(res) => {
+            out_slice.copy_from_slice(res.unpack().transpose().as_slice());
+        }
+        None => {
+            artiq_raise!("LinAlgError", "Matrix is not positive definite");
+        }
+    };
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_qr(mat1: *mut InputMatrix, out_q: *mut InputMatrix, out_r: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out_q = out_q.as_mut().unwrap();
+    let out_r = out_r.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+    let outq_dim = (*out_q).get_dims();
+    let outr_dim = (*out_r).get_dims();
+
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let out_q_slice = slice::from_raw_parts_mut(out_q.data, outq_dim[0] * outq_dim[1]);
+    let out_r_slice = slice::from_raw_parts_mut(out_r.data, outr_dim[0] * outr_dim[1]);
+
+    // Refer to https://github.com/dimforge/nalgebra/issues/735
+    let matrix1 = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+
+    let res = matrix1.qr();
+    let (q, r) = res.unpack();
+
+    // Uses different algo need to match numpy
+    out_q_slice.copy_from_slice(q.transpose().as_slice());
+    out_r_slice.copy_from_slice(r.transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_svd(
+    mat1: *mut InputMatrix,
+    outu: *mut InputMatrix,
+    outs: *mut InputMatrix,
+    outvh: *mut InputMatrix,
+) {
+    let mat1 = mat1.as_mut().unwrap();
+    let outu = outu.as_mut().unwrap();
+    let outs = outs.as_mut().unwrap();
+    let outvh = outvh.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+    let outu_dim = (*outu).get_dims();
+    let outs_dim = (*outs).get_dims();
+    let outvh_dim = (*outvh).get_dims();
+
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let out_u_slice = slice::from_raw_parts_mut(outu.data, outu_dim[0] * outu_dim[1]);
+    let out_s_slice = slice::from_raw_parts_mut(outs.data, outs_dim[0]);
+    let out_vh_slice = slice::from_raw_parts_mut(outvh.data, outvh_dim[0] * outvh_dim[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let result = matrix.svd(true, true);
+    out_u_slice.copy_from_slice(result.u.unwrap().transpose().as_slice());
+    out_s_slice.copy_from_slice(result.singular_values.as_slice());
+    out_vh_slice.copy_from_slice(result.v_t.unwrap().transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_inv(mat1: *mut InputMatrix, out: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out = out.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+    let dim1 = (*mat1).get_dims();
+
+    if dim1[0] != dim1[1] {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+
+    let outdim = out.get_dims();
+    let out_slice = slice::from_raw_parts_mut(out.data, outdim[0] * outdim[1]);
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    if !matrix.is_invertible() {
+        artiq_raise!("LinAlgError", "no inverse for Singular Matrix");
+    }
+    let inv = matrix.try_inverse().unwrap();
+    out_slice.copy_from_slice(inv.transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_pinv(mat1: *mut InputMatrix, out: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out = out.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+    let dim1 = (*mat1).get_dims();
+    let outdim = out.get_dims();
+    let out_slice = slice::from_raw_parts_mut(out.data, outdim[0] * outdim[1]);
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let svd = matrix.svd(true, true);
+    let inv = svd.pseudo_inverse(1e-15);
+
+    match inv {
+        Ok(m) => {
+            out_slice.copy_from_slice(m.transpose().as_slice());
+        }
+        Err(_) => {
+            artiq_raise!("LinAlgError", "SVD computation does not converge");
+        }
+    }
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_matrix_power(mat1: *mut InputMatrix, mat2: *mut InputMatrix, out: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let mat2 = mat2.as_mut().unwrap();
+    let out = out.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+    let power = slice::from_raw_parts_mut(mat2.data, 1);
+    let power = power[0];
+    let outdim = out.get_dims();
+    let out_slice = slice::from_raw_parts_mut(out.data, outdim[0] * outdim[1]);
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let mut abs_power = power;
+    if abs_power < 0.0 {
+        abs_power = abs_power * -1.0;
+    }
+    let matrix1 = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    if !matrix1.is_square() {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+    let mut result = matrix1.pow(abs_power as u32);
+
+    if power < 0.0 {
+        if !matrix1.is_invertible() {
+            artiq_raise!("LinAlgError", "no inverse for Singular Matrix");
+        }
+        result = result.try_inverse().unwrap();
+    }
+    out_slice.copy_from_slice(result.transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn np_linalg_det(mat1: *mut InputMatrix, out: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out = out.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+    let dim1 = (*mat1).get_dims();
+    let out_slice = slice::from_raw_parts_mut(out.data, 1);
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    if !matrix.is_square() {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+    out_slice[0] = matrix.determinant();
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn sp_linalg_lu(mat1: *mut InputMatrix, out_l: *mut InputMatrix, out_u: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out_l = out_l.as_mut().unwrap();
+    let out_u = out_u.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+    let outl_dim = (*out_l).get_dims();
+    let outu_dim = (*out_u).get_dims();
+
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let out_l_slice = slice::from_raw_parts_mut(out_l.data, outl_dim[0] * outl_dim[1]);
+    let out_u_slice = slice::from_raw_parts_mut(out_u.data, outu_dim[0] * outu_dim[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let (_, l, u) = matrix.lu().unpack();
+
+    out_l_slice.copy_from_slice(l.transpose().as_slice());
+    out_u_slice.copy_from_slice(u.transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn sp_linalg_schur(mat1: *mut InputMatrix, out_t: *mut InputMatrix, out_z: *mut InputMatrix) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out_t = out_t.as_mut().unwrap();
+    let out_z = out_z.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+
+    if dim1[0] != dim1[1] {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+
+    let out_t_dim = (*out_t).get_dims();
+    let out_z_dim = (*out_z).get_dims();
+
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let out_t_slice = slice::from_raw_parts_mut(out_t.data, out_t_dim[0] * out_t_dim[1]);
+    let out_z_slice = slice::from_raw_parts_mut(out_z.data, out_z_dim[0] * out_z_dim[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let (z, t) = matrix.schur().unpack();
+
+    out_t_slice.copy_from_slice(t.transpose().as_slice());
+    out_z_slice.copy_from_slice(z.transpose().as_slice());
+}
+
+/// # Safety
+///
+/// `mat1` should point to a valid 2DArray of `f64` floats in row-major order
+#[no_mangle]
+pub unsafe extern "C" fn sp_linalg_hessenberg(
+    mat1: *mut InputMatrix,
+    out_h: *mut InputMatrix,
+    out_q: *mut InputMatrix,
+) {
+    let mat1 = mat1.as_mut().unwrap();
+    let out_h = out_h.as_mut().unwrap();
+    let out_q = out_q.as_mut().unwrap();
+
+    if mat1.ndims != 2 {
+        artiq_raise!(
+            "ValueError",
+            "expected 2D Vector Input, but received {1}D input)",
+            0,
+            mat1.ndims as i64,
+            0
+        );
+    }
+
+    let dim1 = (*mat1).get_dims();
+
+    if dim1[0] != dim1[1] {
+        artiq_raise!(
+            "ValueError",
+            "last 2 dimensions of the array must be square: {1} != {2}",
+            0,
+            dim1[0] as i64,
+            dim1[1] as i64
+        );
+    }
+
+    let out_h_dim = (*out_h).get_dims();
+    let out_q_dim = (*out_q).get_dims();
+
+    let data_slice1 = slice::from_raw_parts_mut(mat1.data, dim1[0] * dim1[1]);
+    let out_h_slice = slice::from_raw_parts_mut(out_h.data, out_h_dim[0] * out_h_dim[1]);
+    let out_q_slice = slice::from_raw_parts_mut(out_q.data, out_q_dim[0] * out_q_dim[1]);
+
+    let matrix = DMatrix::from_row_slice(dim1[0], dim1[1], data_slice1);
+    let (q, h) = matrix.hessenberg().unpack();
+
+    out_h_slice.copy_from_slice(h.transpose().as_slice());
+    out_q_slice.copy_from_slice(q.transpose().as_slice());
+}
--- a/src/libksupport/src/kernel/mod.rs
+++ b/src/libksupport/src/kernel/mod.rs
@ -13,6 +13,7 @@ mod dma;
 mod rpc;
 pub use dma::DmaRecorder;
 mod cache;
+mod linalg;
 #[cfg(has_drtio)]
 mod subkernel;

@ -23,6 +24,7 @@ pub enum SubkernelStatus {
    Timeout,
    IncorrectState,
    CommLost,
+    Exception(Vec<u8>),
    OtherError,
 }

@ -79,6 +81,7 @@ pub enum Message {
        id: u32,
        destination: u8,
        run: bool,
+        timestamp: u64,
    },
    #[cfg(has_drtio)]
    SubkernelLoadRunReply {
@ -90,9 +93,7 @@ pub enum Message {
        timeout: i64,
    },
    #[cfg(has_drtio)]
-    SubkernelAwaitFinishReply {
-        status: SubkernelStatus,
-    },
+    SubkernelAwaitFinishReply,
    #[cfg(has_drtio)]
    SubkernelMsgSend {
        id: u32,
@ -109,9 +110,10 @@ pub enum Message {
    },
    #[cfg(has_drtio)]
    SubkernelMsgRecvReply {
-        status: SubkernelStatus,
        count: u8,
    },
+    #[cfg(has_drtio)]
+    SubkernelError(SubkernelStatus),
 }

 static CHANNEL_0TO1: Mutex<Option<sync_channel::Sender<'static, Message>>> = Mutex::new(None);
--- a/src/libksupport/src/kernel/subkernel.rs
+++ b/src/libksupport/src/kernel/subkernel.rs
@ -3,7 +3,7 @@ use alloc::vec::Vec;
 use cslice::CSlice;

 use super::{Message, SubkernelStatus, KERNEL_CHANNEL_0TO1, KERNEL_CHANNEL_1TO0};
-use crate::{artiq_raise, rpc::send_args};
+use crate::{artiq_raise, eh_artiq, rpc::send_args, rtio::now_mu};

 pub extern "C" fn load_run(id: u32, destination: u8, run: bool) {
    unsafe {
@ -14,6 +14,7 @@ pub extern "C" fn load_run(id: u32, destination: u8, run: bool) {
                id: id,
                destination: destination,
                run: run,
+                timestamp: now_mu() as u64,
            });
    }
    match unsafe { KERNEL_CHANNEL_0TO1.as_mut().unwrap() }.recv() {
@ -36,21 +37,18 @@ pub extern "C" fn await_finish(id: u32, timeout: i64) {
            });
    }
    match unsafe { KERNEL_CHANNEL_0TO1.as_mut().unwrap() }.recv() {
-        Message::SubkernelAwaitFinishReply {
-            status: SubkernelStatus::NoError,
-        } => (),
-        Message::SubkernelAwaitFinishReply {
-            status: SubkernelStatus::IncorrectState,
-        } => artiq_raise!("SubkernelError", "Subkernel not running"),
-        Message::SubkernelAwaitFinishReply {
-            status: SubkernelStatus::Timeout,
-        } => artiq_raise!("SubkernelError", "Subkernel timed out"),
-        Message::SubkernelAwaitFinishReply {
-            status: SubkernelStatus::CommLost,
-        } => artiq_raise!("SubkernelError", "Lost communication with satellite"),
-        Message::SubkernelAwaitFinishReply {
-            status: SubkernelStatus::OtherError,
-        } => artiq_raise!("SubkernelError", "An error occurred during subkernel operation"),
+        Message::SubkernelAwaitFinishReply => (),
+        Message::SubkernelError(SubkernelStatus::IncorrectState) => {
+            artiq_raise!("SubkernelError", "Subkernel not running")
+        }
+        Message::SubkernelError(SubkernelStatus::Timeout) => artiq_raise!("SubkernelError", "Subkernel timed out"),
+        Message::SubkernelError(SubkernelStatus::CommLost) => {
+            artiq_raise!("SubkernelError", "Lost communication with satellite")
+        }
+        Message::SubkernelError(SubkernelStatus::OtherError) => {
+            artiq_raise!("SubkernelError", "An error occurred during subkernel operation")
+        }
+        Message::SubkernelError(SubkernelStatus::Exception(raw_exception)) => eh_artiq::raise_raw(&raw_exception),
        _ => panic!("expected SubkernelAwaitFinishReply after SubkernelAwaitFinishRequest"),
    }
 }
@ -92,30 +90,22 @@ pub extern "C" fn await_message(id: i32, timeout: i64, tags: &CSlice<u8>, min: u
            });
    }
    match unsafe { KERNEL_CHANNEL_0TO1.as_mut().unwrap() }.recv() {
-        Message::SubkernelMsgRecvReply {
-            status: SubkernelStatus::NoError,
-            count,
-        } => {
+        Message::SubkernelMsgRecvReply { count } => {
            if min > count || count > max {
                artiq_raise!("SubkernelError", "Received more or less arguments than required")
            }
        }
-        Message::SubkernelMsgRecvReply {
-            status: SubkernelStatus::IncorrectState,
-            ..
-        } => artiq_raise!("SubkernelError", "Subkernel not running"),
-        Message::SubkernelMsgRecvReply {
-            status: SubkernelStatus::Timeout,
-            ..
-        } => artiq_raise!("SubkernelError", "Subkernel timed out"),
-        Message::SubkernelMsgRecvReply {
-            status: SubkernelStatus::CommLost,
-            ..
-        } => artiq_raise!("SubkernelError", "Lost communication with satellite"),
-        Message::SubkernelMsgRecvReply {
-            status: SubkernelStatus::OtherError,
-            ..
-        } => artiq_raise!("SubkernelError", "An error occurred during subkernel operation"),
+        Message::SubkernelError(SubkernelStatus::IncorrectState) => {
+            artiq_raise!("SubkernelError", "Subkernel not running")
+        }
+        Message::SubkernelError(SubkernelStatus::Timeout) => artiq_raise!("SubkernelError", "Subkernel timed out"),
+        Message::SubkernelError(SubkernelStatus::CommLost) => {
+            artiq_raise!("SubkernelError", "Lost communication with satellite")
+        }
+        Message::SubkernelError(SubkernelStatus::OtherError) => {
+            artiq_raise!("SubkernelError", "An error occurred during subkernel operation")
+        }
+        Message::SubkernelError(SubkernelStatus::Exception(raw_exception)) => eh_artiq::raise_raw(&raw_exception),
        _ => panic!("expected SubkernelMsgRecvReply after SubkernelMsgRecvRequest"),
    }
    // RpcRecvRequest should be called after this to receive message data
--- a/src/runtime/Cargo.toml.tpl
+++ b/src/runtime/Cargo.toml.tpl
@ -8,6 +8,7 @@ edition = "2018"
 [features]
 target_zc706 = ["libboard_zynq/target_zc706", "libsupport_zynq/target_zc706", "libconfig/target_zc706", "libboard_artiq/target_zc706"]
 target_kasli_soc = ["libboard_zynq/target_kasli_soc", "libsupport_zynq/target_kasli_soc", "libconfig/target_kasli_soc", "libboard_artiq/target_kasli_soc"]
+target_ebaz4205 = ["libboard_zynq/target_ebaz4205", "libsupport_zynq/target_ebaz4205", "libconfig/target_ebaz4205", "libboard_artiq/target_ebaz4205"]
 default = ["target_zc706"]

 [build-dependencies]
@ -20,6 +21,7 @@ cslice = "0.3"
 log = "0.4"
 embedded-hal = "0.2"
 core_io = { version = "0.1", features = ["collections"] }
+crc = { version = "1.7", default-features = false }
 byteorder = { version = "1.3", default-features = false }
 void = { version = "1", default-features = false }
 futures = { version = "0.3", default-features = false, features = ["async-await"] }
--- a/src/runtime/src/comms.rs
+++ b/src/runtime/src/comms.rs
@ -405,8 +405,9 @@ async fn handle_run_kernel(
                id,
                destination: _,
                run,
+                timestamp,
            } => {
-                let succeeded = match subkernel::load(aux_mutex, routing_table, timer, id, run).await {
+                let succeeded = match subkernel::load(aux_mutex, routing_table, timer, id, run, timestamp).await {
                    Ok(()) => true,
                    Err(e) => {
                        error!("Error loading subkernel: {:?}", e);
@ -422,33 +423,23 @@ async fn handle_run_kernel(
            #[cfg(has_drtio)]
            kernel::Message::SubkernelAwaitFinishRequest { id, timeout } => {
                let res = subkernel::await_finish(aux_mutex, routing_table, timer, id, timeout).await;
-                let status = match res {
-                    Ok(ref res) => {
+                let response = match res {
+                    Ok(res) => {
                        if res.status == subkernel::FinishStatus::CommLost {
-                            kernel::SubkernelStatus::CommLost
-                        } else if let Some(exception) = &res.exception {
-                            error!("Exception in subkernel");
-                            match stream {
-                                None => (),
-                                Some(stream) => {
-                                    write_chunk(stream, exception).await?;
-                                }
-                            }
-                            // will not be called after exception is served
-                            kernel::SubkernelStatus::OtherError
+                            kernel::Message::SubkernelError(kernel::SubkernelStatus::CommLost)
+                        } else if let Some(exception) = res.exception {
+                            kernel::Message::SubkernelError(kernel::SubkernelStatus::Exception(exception))
                        } else {
-                            kernel::SubkernelStatus::NoError
+                            kernel::Message::SubkernelAwaitFinishReply
                        }
                    }
-                    Err(SubkernelError::Timeout) => kernel::SubkernelStatus::Timeout,
-                    Err(SubkernelError::IncorrectState) => kernel::SubkernelStatus::IncorrectState,
-                    Err(_) => kernel::SubkernelStatus::OtherError,
+                    Err(SubkernelError::Timeout) => kernel::Message::SubkernelError(kernel::SubkernelStatus::Timeout),
+                    Err(SubkernelError::IncorrectState) => {
+                        kernel::Message::SubkernelError(kernel::SubkernelStatus::IncorrectState)
+                    }
+                    Err(_) => kernel::Message::SubkernelError(kernel::SubkernelStatus::OtherError),
                };
-                control
-                    .borrow_mut()
-                    .tx
-                    .async_send(kernel::Message::SubkernelAwaitFinishReply { status: status })
-                    .await;
+                control.borrow_mut().tx.async_send(response).await;
            }
            #[cfg(has_drtio)]
            kernel::Message::SubkernelMsgSend { id, destination, data } => {
@ -469,35 +460,23 @@ async fn handle_run_kernel(
            #[cfg(has_drtio)]
            kernel::Message::SubkernelMsgRecvRequest { id, timeout, tags } => {
                let message_received = subkernel::message_await(id as u32, timeout, timer).await;
-                let (status, count) = match message_received {
-                    Ok(ref message) => (kernel::SubkernelStatus::NoError, message.count),
-                    Err(SubkernelError::Timeout) => (kernel::SubkernelStatus::Timeout, 0),
-                    Err(SubkernelError::IncorrectState) => (kernel::SubkernelStatus::IncorrectState, 0),
-                    Err(SubkernelError::CommLost) => (kernel::SubkernelStatus::CommLost, 0),
+                let response = match message_received {
+                    Ok(ref message) => kernel::Message::SubkernelMsgRecvReply { count: message.count },
+                    Err(SubkernelError::Timeout) => kernel::Message::SubkernelError(kernel::SubkernelStatus::Timeout),
+                    Err(SubkernelError::IncorrectState) => {
+                        kernel::Message::SubkernelError(kernel::SubkernelStatus::IncorrectState)
+                    }
+                    Err(SubkernelError::CommLost) => kernel::Message::SubkernelError(kernel::SubkernelStatus::CommLost),
                    Err(SubkernelError::SubkernelException) => {
-                        error!("Exception in subkernel");
                        // just retrieve the exception
                        let status = subkernel::await_finish(aux_mutex, routing_table, timer, id as u32, timeout)
                            .await
                            .unwrap();
-                        match stream {
-                            None => (),
-                            Some(stream) => {
-                                write_chunk(stream, &status.exception.unwrap()).await?;
-                            }
-                        }
-                        (kernel::SubkernelStatus::OtherError, 0)
+                        kernel::Message::SubkernelError(kernel::SubkernelStatus::Exception(status.exception.unwrap()))
                    }
-                    Err(_) => (kernel::SubkernelStatus::OtherError, 0),
+                    Err(_) => kernel::Message::SubkernelError(kernel::SubkernelStatus::OtherError),
                };
-                control
-                    .borrow_mut()
-                    .tx
-                    .async_send(kernel::Message::SubkernelMsgRecvReply {
-                        status: status,
-                        count: count,
-                    })
-                    .await;
+                control.borrow_mut().tx.async_send(response).await;
                if let Ok(message) = message_received {
                    // receive code almost identical to RPC recv, except we are not reading from a stream
                    let mut reader = Cursor::new(message.data);
@ -529,7 +508,7 @@ async fn handle_run_kernel(
                            .async_send(kernel::Message::RpcRecvReply(Ok(0)))
                            .await;
                        i += 1;
-                        if i < count {
+                        if i < message.count {
                            current_tags = remaining_tags;
                        } else {
                            break;
@ -771,14 +750,13 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
    #[cfg(has_drtio_routing)]
    drtio_routing::interconnect_disable_all();

-    rtio_mgt::startup(&aux_mutex, &drtio_routing_table, &up_destinations, timer);
+    rtio_mgt::startup(&aux_mutex, &drtio_routing_table, &up_destinations, &cfg, timer);
    ksupport::setup_device_map(&cfg);

    analyzer::start(&aux_mutex, &drtio_routing_table, &up_destinations, timer);
    moninj::start(timer, &aux_mutex, &drtio_routing_table);

    let control: Rc<RefCell<kernel::Control>> = Rc::new(RefCell::new(kernel::Control::start()));
-    let idle_kernel = Rc::new(cfg.read("idle_kernel").ok());
    if let Ok(buffer) = cfg.read("startup_kernel") {
        info!("Loading startup kernel...");
        let routing_table = drtio_routing_table.borrow();
@ -805,13 +783,34 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
        }
    }

-    mgmt::start(cfg);
+    let cfg = Rc::new(cfg);
+    let restart_idle = Rc::new(Semaphore::new(1, 1));
+    mgmt::start(
+        cfg.clone(),
+        restart_idle.clone(),
+        Some(mgmt::DrtioContext(
+            aux_mutex.clone(),
+            drtio_routing_table.clone(),
+            timer,
+        )),
+    );

    task::spawn(async move {
        let connection = Rc::new(Semaphore::new(1, 1));
        let terminate = Rc::new(Semaphore::new(0, 1));
+        let can_restart_idle = Rc::new(Semaphore::new(1, 1));
+        let restart_idle = restart_idle.clone();
        loop {
-            let mut stream = TcpStream::accept(1381, 0x10_000, 0x10_000).await.unwrap();
+            let control = control.clone();
+            let mut maybe_stream = select_biased! {
+                s = (async {
+                        TcpStream::accept(1381, 0x10_000, 0x10_000).await.unwrap()
+                    }).fuse() => Some(s),
+                _ = (async {
+                        restart_idle.async_wait().await;
+                        can_restart_idle.async_wait().await;
+                    }).fuse() => None
+            };

            if connection.try_wait().is_none() {
                // there is an existing connection
@ -819,47 +818,58 @@ pub fn main(timer: GlobalTimer, cfg: Config) {
                connection.async_wait().await;
            }

+            let maybe_idle_kernel = cfg.read("idle_kernel").ok();
+            if maybe_idle_kernel.is_none() && maybe_stream.is_none() {
+                control.borrow_mut().restart(); // terminate idle kernel if running
+            }
+
            let control = control.clone();
-            let idle_kernel = idle_kernel.clone();
            let connection = connection.clone();
            let terminate = terminate.clone();
+            let can_restart_idle = can_restart_idle.clone();
            let up_destinations = up_destinations.clone();
            let aux_mutex = aux_mutex.clone();
            let routing_table = drtio_routing_table.clone();

            // we make sure the value of terminate is 0 before we start
            let _ = terminate.try_wait();
+            let _ = can_restart_idle.try_wait();
            task::spawn(async move {
                let routing_table = routing_table.borrow();
                select_biased! {
                    _ = (async {
-                        let _ = handle_connection(&mut stream, control.clone(), &up_destinations, &aux_mutex, &routing_table, timer)
-                            .await
-                            .map_err(|e| warn!("connection terminated: {}", e));
-                        if let Some(buffer) = &*idle_kernel {
-                            info!("Loading idle kernel");
-                            let res = handle_flash_kernel(&buffer, &control, &up_destinations,  &aux_mutex, &routing_table, timer)
-                                .await;
-                            match res {
-                                #[cfg(has_drtio)]
-                                Err(Error::DestinationDown) => {
-                                    let mut countdown = timer.countdown();
-                                    delay(&mut countdown, Milliseconds(500)).await;
+                        if let Some(stream) = &mut maybe_stream {
+                            let _ = handle_connection(stream, control.clone(), &up_destinations, &aux_mutex, &routing_table, timer)
+                                .await
+                                .map_err(|e| warn!("connection terminated: {}", e));
+                        }
+                        can_restart_idle.signal();
+                        match maybe_idle_kernel {
+                            Some(buffer) => {
+                                loop {
+                                    info!("loading idle kernel");
+                                    match handle_flash_kernel(&buffer, &control, &up_destinations, &aux_mutex, &routing_table, timer).await {
+                                        Ok(_) => {
+                                            info!("running idle kernel");
+                                            match handle_run_kernel(None, &control, &up_destinations, &aux_mutex, &routing_table, timer).await {
+                                                Ok(_) => info!("idle kernel finished"),
+                                                Err(_) => warn!("idle kernel running error")
+                                            }
+                                        },
+                                        Err(_) => warn!("idle kernel loading error")
+                                    }
                                }
-                                Err(_) => warn!("error loading idle kernel"),
-                                _ => (),
-                            }
-                            info!("Running idle kernel");
-                            let _ = handle_run_kernel(None, &control, &up_destinations, &aux_mutex, &routing_table, timer)
-                                .await.map_err(|_| warn!("error running idle kernel"));
-                            info!("Idle kernel terminated");
+                            },
+                            None => info!("no idle kernel found")
                        }
                    }).fuse() => (),
                    _ = terminate.async_wait().fuse() => ()
                }
                connection.signal();
-                let _ = stream.flush().await;
-                let _ = stream.abort().await;
+                if let Some(stream) = maybe_stream {
+                    let _ = stream.flush().await;
+                    let _ = stream.abort().await;
+                }
            });
        }
    });
@ -908,7 +918,8 @@ pub fn soft_panic_main(timer: GlobalTimer, cfg: Config) -> ! {

    Sockets::init(32);

-    mgmt::start(cfg);
+    let dummy = Rc::new(Semaphore::new(0, 1));
+    mgmt::start(Rc::new(cfg), dummy, None);

    // getting eth settings disables the LED as it resets GPIO
    // need to re-enable it here
--- a/src/runtime/src/mgmt.rs
+++ b/src/runtime/src/mgmt.rs
--- a/src/runtime/src/moninj.rs
+++ b/src/runtime/src/moninj.rs
@ -102,7 +102,7 @@ mod remote_moninj {
        overrd: i8,
        value: i8,
    ) {
-        let _lock = aux_mutex.lock();
+        let _lock = aux_mutex.async_lock().await;
        drtioaux_async::send(
            linkno,
            &drtioaux_async::Packet::InjectionRequest {
--- a/src/runtime/src/rtio_clocking.rs
+++ b/src/runtime/src/rtio_clocking.rs
@ -1,6 +1,8 @@
+#[cfg(not(feature = "target_ebaz4205"))]
 use embedded_hal::blocking::delay::DelayMs;
 #[cfg(has_si5324)]
 use ksupport::i2c;
+#[cfg(not(feature = "target_ebaz4205"))]
 use libboard_artiq::pl;
 #[cfg(has_si5324)]
 use libboard_artiq::si5324;
@ -11,6 +13,8 @@ use libboard_zynq::i2c::I2c;
 use libboard_zynq::timer::GlobalTimer;
 use libconfig::Config;
 use log::{info, warn};
+#[cfg(feature = "target_ebaz4205")]
+use {libboard_zynq::slcr, libregister::RegisterRW};

 #[derive(Debug, PartialEq, Copy, Clone)]
 #[allow(non_camel_case_types)]
@ -69,7 +73,7 @@ fn get_rtio_clock_cfg(cfg: &Config) -> RtioClock {
    res
 }

-#[cfg(not(has_drtio))]
+#[cfg(not(any(has_drtio, feature = "target_ebaz4205")))]
 fn init_rtio(timer: &mut GlobalTimer) {
    info!("Switching SYS clocks...");
    unsafe {
@ -406,6 +410,38 @@ fn get_si549_setting(clk: RtioClock) -> si549::FrequencySetting {
    }
 }

+#[cfg(feature = "target_ebaz4205")]
+fn set_fclk0_freq(clk: RtioClock, cfg: &Config) {
+    let io_pll_freq: u32 = 1_000_000_000; // Hardcoded in zynq-rs
+    let mut target_freq = 0;
+    let mut divisor0 = 1u8;
+
+    match clk {
+        RtioClock::Int_100 => {
+            target_freq = 100_000_000;
+            divisor0 = 10;
+        }
+        RtioClock::Int_125 => {
+            target_freq = 125_000_000;
+            divisor0 = 8;
+        }
+        _ => {
+            warn!("Unsupported RTIO Clock: '{:?}'", clk);
+            return;
+        }
+    }
+
+    slcr::RegisterBlock::unlocked(|slcr| {
+        slcr.fpga0_clk_ctrl.modify(|_, w| w.divisor0(divisor0));
+    });
+
+    info!(
+        "Set FCLK0 to {:.2} MHz (target: {} MHz).",
+        io_pll_freq as f64 / divisor0 as f64,
+        target_freq / 1_000_000
+    );
+}
+
 pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
    let clk = get_rtio_clock_cfg(cfg);
    #[cfg(has_si5324)]
@ -429,9 +465,19 @@ pub fn init(timer: &mut GlobalTimer, cfg: &Config) {
    #[cfg(has_drtio)]
    init_drtio(timer);

-    #[cfg(not(has_drtio))]
+    #[cfg(not(any(has_drtio, feature = "target_ebaz4205")))]
    init_rtio(timer);

+    #[cfg(feature = "target_ebaz4205")]
+    {
+        match clk {
+            RtioClock::Int_100 | RtioClock::Int_125 => {
+                set_fclk0_freq(clk, cfg);
+            }
+            _ => {} // Not set for external clocks
+        }
+    }
+
    #[cfg(all(has_si549, has_wrpll))]
    {
        // SYS CLK switch will reset CSRs that are used by WRPLL
--- a/src/runtime/src/rtio_mgt.rs
+++ b/src/runtime/src/rtio_mgt.rs
@ -3,7 +3,9 @@ use core::cell::RefCell;

 use libboard_artiq::{drtio_routing, drtio_routing::RoutingTable, pl::csr};
 use libboard_zynq::timer::GlobalTimer;
+use libconfig::Config;
 use libcortex_a9::mutex::Mutex;
+use log::{info, warn};

 #[cfg(has_drtio)]
 pub mod drtio {
@ -11,9 +13,13 @@ pub mod drtio {
    use core::fmt;

    use embedded_hal::blocking::delay::DelayMs;
+    #[cfg(has_drtio_eem)]
+    use embedded_hal::blocking::delay::DelayUs;
    use ksupport::{resolve_channel_name, ASYNC_ERROR_BUSY, ASYNC_ERROR_COLLISION, ASYNC_ERROR_SEQUENCE_ERROR,
                   SEEN_ASYNC_ERRORS};
    use libasync::{delay, task};
+    #[cfg(has_drtio_eem)]
+    use libboard_artiq::drtio_eem;
    use libboard_artiq::{drtioaux::Error as DrtioError,
                         drtioaux_async,
                         drtioaux_async::Packet,
@ -24,6 +30,10 @@ pub mod drtio {
    use super::*;
    use crate::{analyzer::remote_analyzer::RemoteBuffer, rtio_dma::remote_dma, subkernel};

+    #[cfg(has_drtio_eem)]
+    const DRTIO_EEM_LINKNOS: core::ops::Range<usize> =
+        (csr::DRTIO.len() - csr::CONFIG_EEM_DRTIO_COUNT as usize)..csr::DRTIO.len();
+
    #[derive(Debug, PartialEq, Eq, Clone, Copy)]
    pub enum Error {
        Timeout,
@ -74,8 +84,18 @@ pub mod drtio {
        });
    }

-    async fn link_rx_up(linkno: u8) -> bool {
+    async fn link_rx_up(linkno: u8, _timer: &mut GlobalTimer) -> bool {
        let linkno = linkno as usize;
+        #[cfg(has_drtio_eem)]
+        if DRTIO_EEM_LINKNOS.contains(&linkno) {
+            let eem_trx_no = linkno - DRTIO_EEM_LINKNOS.start;
+            unsafe {
+                csr::eem_transceiver::transceiver_sel_write(eem_trx_no as u8);
+                csr::eem_transceiver::comma_align_reset_write(1);
+            }
+            _timer.delay_us(100);
+            return unsafe { csr::eem_transceiver::comma_read() == 1 };
+        }
        unsafe { (csr::DRTIO[linkno].rx_up_read)() == 1 }
    }

@ -127,6 +147,8 @@ pub mod drtio {
            | Packet::SubkernelLoadRunReply { destination, .. }
            | Packet::SubkernelMessage { destination, .. }
            | Packet::SubkernelMessageAck { destination, .. }
+            | Packet::SubkernelException { destination, .. }
+            | Packet::SubkernelExceptionRequest { destination, .. }
            | Packet::DmaPlaybackStatus { destination, .. }
            | Packet::SubkernelFinished { destination, .. } => {
                if destination == 0 {
@ -148,8 +170,8 @@ pub mod drtio {
        }
    }

-    async fn recv_aux_timeout(linkno: u8, timeout: u64, timer: GlobalTimer) -> Result<Packet, Error> {
-        if !link_rx_up(linkno).await {
+    async fn recv_aux_timeout(linkno: u8, timeout: u64, mut timer: GlobalTimer) -> Result<Packet, Error> {
+        if !link_rx_up(linkno, &mut timer).await {
            return Err(Error::LinkDown);
        }
        match drtioaux_async::recv_timeout(linkno, Some(timeout), timer).await {
@ -164,9 +186,9 @@ pub mod drtio {
        linkno: u8,
        routing_table: &RoutingTable,
        request: &Packet,
-        timer: GlobalTimer,
+        mut timer: GlobalTimer,
    ) -> Result<Packet, Error> {
-        if !link_rx_up(linkno).await {
+        if !link_rx_up(linkno, &mut timer).await {
            return Err(Error::LinkDown);
        }
        let _lock = aux_mutex.async_lock().await;
@ -181,10 +203,7 @@ pub mod drtio {

    async fn drain_buffer(linkno: u8, draining_time: Milliseconds, timer: GlobalTimer) {
        let max_time = timer.get_time() + draining_time;
-        loop {
-            if timer.get_time() > max_time {
-                return;
-            }
+        while timer.get_time() < max_time {
            let _ = drtioaux_async::recv(linkno).await;
        }
    }
@ -193,11 +212,11 @@ pub mod drtio {
        aux_mutex: &Rc<Mutex<bool>>,
        linkno: u8,
        routing_table: &RoutingTable,
-        timer: GlobalTimer,
+        mut timer: GlobalTimer,
    ) -> u32 {
        let mut count = 0;
        loop {
-            if !link_rx_up(linkno).await {
+            if !link_rx_up(linkno, &mut timer).await {
                return 0;
            }
            count += 1;
@ -461,7 +480,7 @@ pub mod drtio {
        aux_mutex: &Rc<Mutex<bool>>,
        routing_table: &RoutingTable,
        up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
-        timer: GlobalTimer,
+        mut timer: GlobalTimer,
    ) {
        let mut up_links = [false; csr::DRTIO.len()];
        loop {
@ -469,16 +488,35 @@ pub mod drtio {
                let linkno = linkno as u8;
                if up_links[linkno as usize] {
                    /* link was previously up */
-                    if link_rx_up(linkno).await {
+                    if link_rx_up(linkno, &mut timer).await {
                        process_unsolicited_aux(aux_mutex, linkno, routing_table).await;
                        process_local_errors(linkno).await;
                    } else {
                        info!("[LINK#{}] link is down", linkno);
                        up_links[linkno as usize] = false;
+
+                        #[cfg(has_drtio_eem)]
+                        if DRTIO_EEM_LINKNOS.contains(&(linkno as usize)) {
+                            unsafe {
+                                csr::eem_transceiver::rx_ready_write(0);
+                            }
+                            while !matches!(drtioaux_async::recv(linkno).await, Ok(None)) {}
+                        }
                    }
                } else {
                    /* link was previously down */
-                    if link_rx_up(linkno).await {
+                    #[cfg(has_drtio_eem)]
+                    if DRTIO_EEM_LINKNOS.contains(&(linkno as usize)) {
+                        let eem_trx_no = linkno - DRTIO_EEM_LINKNOS.start as u8;
+                        if !unsafe { drtio_eem::align_wordslip(&mut timer, eem_trx_no) } {
+                            continue;
+                        }
+                        unsafe {
+                            csr::eem_transceiver::rx_ready_write(1);
+                        }
+                    }
+
+                    if link_rx_up(linkno, &mut timer).await {
                        info!("[LINK#{}] link RX became up, pinging", linkno);
                        let ping_count = ping_remote(aux_mutex, linkno, routing_table, timer).await;
                        if ping_count > 0 {
@ -522,7 +560,7 @@ pub mod drtio {

        for linkno in 0..csr::DRTIO.len() {
            let linkno = linkno as u8;
-            if task::block_on(link_rx_up(linkno)) {
+            if task::block_on(link_rx_up(linkno, &mut timer)) {
                let reply = task::block_on(aux_transact(
                    &aux_mutex,
                    linkno,
@ -539,7 +577,7 @@ pub mod drtio {
        }
    }

-    async fn partition_data<PacketF, HandlerF>(
+    pub async fn partition_data<PacketF, HandlerF>(
        linkno: u8,
        aux_mutex: &Rc<Mutex<bool>>,
        routing_table: &RoutingTable,
@ -791,6 +829,7 @@ pub mod drtio {
        id: u32,
        destination: u8,
        run: bool,
+        timestamp: u64,
    ) -> Result<(), Error> {
        let linkno = routing_table.0[destination as usize][0] - 1;
        let reply = aux_transact(
@ -802,6 +841,7 @@ pub mod drtio {
                source: 0,
                destination: destination,
                run: run,
+                timestamp,
            },
            timer,
        )
@ -833,13 +873,19 @@ pub mod drtio {
                linkno,
                routing_table,
                &Packet::SubkernelExceptionRequest {
+                    source: 0,
                    destination: destination,
                },
                timer,
            )
            .await?;
            match reply {
-                Packet::SubkernelException { last, length, data } => {
+                Packet::SubkernelException {
+                    destination: 0,
+                    last,
+                    length,
+                    data,
+                } => {
                    remote_data.extend(&data[0..length as usize]);
                    if last {
                        return Ok(remote_data);
@ -898,12 +944,36 @@ pub mod drtio {
    pub fn reset(_aux_mutex: Rc<Mutex<bool>>, _routing_table: &RoutingTable, mut _timer: GlobalTimer) {}
 }

+fn toggle_sed_spread(val: u8) {
+    unsafe {
+        csr::rtio_core::sed_spread_enable_write(val);
+    }
+}
+
+fn setup_sed_spread(cfg: &Config) {
+    if let Ok(spread_enable) = cfg.read_str("sed_spread_enable") {
+        match spread_enable.as_ref() {
+            "1" => toggle_sed_spread(1),
+            "0" => toggle_sed_spread(0),
+            _ => {
+                warn!("sed_spread_enable value not supported (only 1, 0 allowed), disabling by default");
+                toggle_sed_spread(0)
+            }
+        };
+    } else {
+        info!("SED spreading disabled by default");
+        toggle_sed_spread(0);
+    }
+}
+
 pub fn startup(
    aux_mutex: &Rc<Mutex<bool>>,
    routing_table: &Rc<RefCell<RoutingTable>>,
    up_destinations: &Rc<RefCell<[bool; drtio_routing::DEST_COUNT]>>,
+    cfg: &Config,
    timer: GlobalTimer,
 ) {
+    setup_sed_spread(cfg);
    drtio::startup(aux_mutex, routing_table, up_destinations, timer);
    unsafe {
        csr::rtio_core::reset_phy_write(1);
--- a/src/runtime/src/subkernel.rs
+++ b/src/runtime/src/subkernel.rs
@ -100,12 +100,22 @@ pub async fn load(
    timer: GlobalTimer,
    id: u32,
    run: bool,
+    timestamp: u64,
 ) -> Result<(), Error> {
    if let Some(subkernel) = SUBKERNELS.async_lock().await.get_mut(&id) {
        if subkernel.state != SubkernelState::Uploaded {
            return Err(Error::IncorrectState);
        }
-        drtio::subkernel_load(aux_mutex, routing_table, timer, id, subkernel.destination, run).await?;
+        drtio::subkernel_load(
+            aux_mutex,
+            routing_table,
+            timer,
+            id,
+            subkernel.destination,
+            run,
+            timestamp,
+        )
+        .await?;
        if run {
            subkernel.state = SubkernelState::Running;
        }
--- a/src/satman/Cargo.toml.tpl
+++ b/src/satman/Cargo.toml.tpl
@ -15,7 +15,9 @@ build_zynq = { path = "../libbuild_zynq" }

 [dependencies]
 log = { version = "0.4", default-features = false }
+byteorder = { version = "1.3", default-features = false }
 core_io = { version = "0.1", features = ["collections"] }
+crc = { version = "1.7", default-features = false }
 cslice = "0.3"
 embedded-hal = "0.2"

--- a/src/satman/src/main.rs
+++ b/src/satman/src/main.rs
--- a/src/satman/src/mgmt.rs
+++ b/src/satman/src/mgmt.rs
@ -0,0 +1,149 @@
+use alloc::vec::Vec;
+
+use byteorder::{ByteOrder, NativeEndian};
+use crc::crc32;
+use io::{ProtoRead, ProtoWrite};
+use libboard_artiq::{drtioaux_proto::SAT_PAYLOAD_MAX_SIZE,
+                     logger::{BufferLogger, LogBufferRef}};
+use libconfig::Config;
+use log::{debug, error, info, warn, LevelFilter};
+
+use crate::routing::{SliceMeta, Sliceable};
+
+type Result<T> = core::result::Result<T, ()>;
+
+pub fn byte_to_level_filter(level_byte: u8) -> Result<LevelFilter> {
+    Ok(match level_byte {
+        0 => LevelFilter::Off,
+        1 => LevelFilter::Error,
+        2 => LevelFilter::Warn,
+        3 => LevelFilter::Info,
+        4 => LevelFilter::Debug,
+        5 => LevelFilter::Trace,
+        lv => {
+            error!("unknown log level: {}", lv);
+            return Err(());
+        }
+    })
+}
+
+fn get_logger_buffer() -> LogBufferRef<'static> {
+    let logger = unsafe { BufferLogger::get_logger().as_mut().unwrap() };
+    loop {
+        if let Some(buffer_ref) = logger.buffer() {
+            return buffer_ref;
+        }
+    }
+}
+
+pub fn clear_log() {
+    let mut buffer = get_logger_buffer();
+    buffer.clear();
+}
+
+pub struct Manager<'a> {
+    cfg: &'a mut Config,
+    last_log: Sliceable,
+    config_payload: Vec<u8>,
+    last_value: Sliceable,
+    image_payload: Vec<u8>,
+}
+
+impl<'a> Manager<'_> {
+    pub fn new(cfg: &mut Config) -> Manager {
+        Manager {
+            cfg: cfg,
+            last_log: Sliceable::new(0, Vec::new()),
+            config_payload: Vec::new(),
+            last_value: Sliceable::new(0, Vec::new()),
+            image_payload: Vec::new(),
+        }
+    }
+
+    pub fn log_get_slice(&mut self, data_slice: &mut [u8; SAT_PAYLOAD_MAX_SIZE], consume: bool) -> SliceMeta {
+        // Populate buffer if depleted
+        if self.last_log.at_end() {
+            let mut buffer = get_logger_buffer();
+            self.last_log.extend(buffer.extract().as_bytes());
+            if consume {
+                buffer.clear();
+            }
+        }
+
+        self.last_log.get_slice_satellite(data_slice)
+    }
+
+    pub fn fetch_config_value(&mut self, key: &str) -> Result<()> {
+        self.cfg
+            .read(&key)
+            .map(|value| {
+                debug!("got value");
+                self.last_value = Sliceable::new(0, value)
+            })
+            .map_err(|_| warn!("read error: no such key"))
+    }
+
+    pub fn get_config_value_slice(&mut self, data_slice: &mut [u8; SAT_PAYLOAD_MAX_SIZE]) -> SliceMeta {
+        self.last_value.get_slice_satellite(data_slice)
+    }
+
+    pub fn add_config_data(&mut self, data: &[u8], data_len: usize) {
+        self.config_payload.write_all(&data[..data_len]).unwrap();
+    }
+
+    pub fn clear_config_data(&mut self) {
+        self.config_payload.clear();
+    }
+
+    pub fn write_config(&mut self) -> Result<()> {
+        let mut payload = &self.config_payload[..];
+        let key = payload.read_string().map_err(|_err| error!("error on reading key"))?;
+        debug!("write key: {}", key);
+        let value = payload.read_bytes().unwrap();
+
+        self.cfg
+            .write(&key, value)
+            .map(|()| debug!("write success"))
+            .map_err(|err| error!("failed to write: {:?}", err))
+    }
+
+    pub fn remove_config(&mut self, key: &str) -> Result<()> {
+        debug!("erase key: {}", key);
+        self.cfg
+            .remove(&key)
+            .map(|()| debug!("erase success"))
+            .map_err(|err| warn!("failed to erase: {:?}", err))
+    }
+
+    pub fn allocate_image_buffer(&mut self, image_size: usize) {
+        self.image_payload = Vec::with_capacity(image_size);
+    }
+
+    pub fn add_image_data(&mut self, data: &[u8], data_len: usize) {
+        self.image_payload.extend(&data[..data_len]);
+    }
+
+    pub fn write_image(&self) {
+        let mut image = self.image_payload.clone();
+        let image_ref = &image[..];
+        let bin_len = image.len() - 4;
+
+        let (image_ref, expected_crc) = {
+            let (image_ref, crc_slice) = image_ref.split_at(bin_len);
+            (image_ref, NativeEndian::read_u32(crc_slice))
+        };
+
+        let actual_crc = crc32::checksum_ieee(image_ref);
+
+        if actual_crc == expected_crc {
+            info!("CRC passed. Writing boot image to SD card...");
+            image.truncate(bin_len);
+            self.cfg.write("boot", image).expect("failed to write boot image");
+        } else {
+            panic!(
+                "CRC failed, images have not been written to flash.\n(actual {:08x}, expected {:08x})",
+                actual_crc, expected_crc
+            );
+        }
+    }
+}
--- a/src/satman/src/repeater.rs
+++ b/src/satman/src/repeater.rs
@ -87,6 +87,10 @@ impl Repeater {
                if rep_link_rx_up(self.repno) {
                    if let Ok(Some(drtioaux::Packet::EchoReply)) = drtioaux::recv(self.auxno) {
                        info!("[REP#{}] remote replied after {} packets", self.repno, ping_count);
+                        let max_time = timer.get_time() + Milliseconds(200);
+                        while timer.get_time() < max_time {
+                            let _ = drtioaux::recv(self.auxno);
+                        }
                        self.state = RepeaterState::Up;
                        if let Err(e) = self.sync_tsc(timer) {
                            error!("[REP#{}] failed to sync TSC ({:?})", self.repno, e);
@ -204,10 +208,37 @@ impl Repeater {
        }
    }

-    pub fn aux_forward(&self, request: &drtioaux::Packet, timer: &mut GlobalTimer) -> Result<(), drtioaux::Error> {
+    pub fn aux_forward(
+        &self,
+        request: &drtioaux::Packet,
+        router: &mut Router,
+        routing_table: &drtio_routing::RoutingTable,
+        rank: u8,
+        self_destination: u8,
+        timer: &mut GlobalTimer,
+    ) -> Result<(), drtioaux::Error> {
        self.aux_send(request)?;
-        let reply = self.recv_aux_timeout(200, timer)?;
-        drtioaux::send(0, &reply).unwrap();
+        loop {
+            let reply = self.recv_aux_timeout(200, timer)?;
+            match reply {
+                // async/locally requested packets to be consumed or routed
+                // these may come while a packet would be forwarded
+                drtioaux::Packet::DmaPlaybackStatus { .. }
+                | drtioaux::Packet::SubkernelFinished { .. }
+                | drtioaux::Packet::SubkernelMessage { .. }
+                | drtioaux::Packet::SubkernelMessageAck { .. }
+                | drtioaux::Packet::SubkernelLoadRunReply { .. }
+                | drtioaux::Packet::SubkernelException { .. }
+                | drtioaux::Packet::DmaAddTraceReply { .. }
+                | drtioaux::Packet::DmaPlaybackReply { .. } => {
+                    router.route(reply, routing_table, rank, self_destination);
+                }
+                _ => {
+                    drtioaux::send(0, &reply).unwrap();
+                    break;
+                }
+            }
+        }
        Ok(())
    }

--- a/src/satman/src/routing.rs
+++ b/src/satman/src/routing.rs
@ -57,8 +57,8 @@ impl Sliceable {
        self.data.extend(data);
    }

-    get_slice_fn!(get_slice_sat, SAT_PAYLOAD_MAX_SIZE);
    get_slice_fn!(get_slice_master, MASTER_PAYLOAD_MAX_SIZE);
+    get_slice_fn!(get_slice_satellite, SAT_PAYLOAD_MAX_SIZE);
 }

 // Packets from downstream (further satellites) are received and routed appropriately.
--- a/src/satman/src/subkernel.rs
+++ b/src/satman/src/subkernel.rs
@ -8,10 +8,10 @@ use core_io::{Error as IoError, Write};
 use cslice::AsCSlice;
 use dma::{Error as DmaError, Manager as DmaManager};
 use io::{Cursor, ProtoWrite};
-use ksupport::{eh_artiq, kernel, rpc};
+use ksupport::{eh_artiq, kernel, rpc, rtio};
 use libboard_artiq::{drtio_routing::RoutingTable,
                     drtioaux,
-                     drtioaux_proto::{PayloadStatus, MASTER_PAYLOAD_MAX_SIZE, SAT_PAYLOAD_MAX_SIZE},
+                     drtioaux_proto::{PayloadStatus, MASTER_PAYLOAD_MAX_SIZE},
                     pl::csr};
 use libboard_zynq::{time::Milliseconds, timer::GlobalTimer};
 use libcortex_a9::sync_channel::Receiver;
@ -47,6 +47,9 @@ enum KernelState {
    DmaAwait {
        max_time: Milliseconds,
    },
+    SubkernelRetrievingException {
+        destination: u8,
+    },
 }

 #[derive(Debug)]
@ -123,10 +126,11 @@ struct MessageManager {
 struct Session {
    id: u32,
    kernel_state: KernelState,
-    last_exception: Option<Sliceable>,
+    last_exception: Option<Sliceable>,   // exceptions raised locally
+    external_exception: Option<Vec<u8>>, // exceptions from sub-subkernels
    messages: MessageManager,
    source: u8, // which destination requested running the kernel
-    subkernels_finished: Vec<u32>,
+    subkernels_finished: Vec<(u32, Option<u8>)>,
 }

 impl Session {
@ -135,6 +139,7 @@ impl Session {
            id: id,
            kernel_state: KernelState::Absent,
            last_exception: None,
+            external_exception: None,
            messages: MessageManager::new(),
            source: 0,
            subkernels_finished: Vec::new(),
@ -344,7 +349,7 @@ impl<'a> Manager<'_> {
        }
    }

-    pub fn run(&mut self, source: u8, id: u32) -> Result<(), Error> {
+    pub fn run(&mut self, source: u8, id: u32, timestamp: u64) -> Result<(), Error> {
        if self.session.kernel_state != KernelState::Loaded || self.session.id != id {
            self.load(id)?;
        }
@ -354,6 +359,7 @@ impl<'a> Manager<'_> {
            csr::cri_con::selected_write(2);
        }

+        rtio::at_mu(timestamp as i64);
        self.control.tx.send(kernel::Message::StartRequest);
        Ok(())
    }
@ -410,9 +416,9 @@ impl<'a> Manager<'_> {
        }
    }

-    pub fn exception_get_slice(&mut self, data_slice: &mut [u8; SAT_PAYLOAD_MAX_SIZE]) -> SliceMeta {
+    pub fn exception_get_slice(&mut self, data_slice: &mut [u8; MASTER_PAYLOAD_MAX_SIZE]) -> SliceMeta {
        match self.session.last_exception.as_mut() {
-            Some(exception) => exception.get_slice_sat(data_slice),
+            Some(exception) => exception.get_slice_master(data_slice),
            None => SliceMeta {
                destination: 0,
                len: 0,
@ -540,7 +546,7 @@ impl<'a> Manager<'_> {
            return;
        }

-        match self.process_external_messages(timer) {
+        match self.process_external_messages(router, routing_table, rank, destination, timer) {
            Ok(()) => (),
            Err(Error::AwaitingMessage) => return, // kernel still waiting, do not process kernel messages
            Err(Error::KernelException(exception)) => {
@ -596,6 +602,41 @@ impl<'a> Manager<'_> {
        }
    }

+    fn check_finished_kernels(
+        &mut self,
+        id: u32,
+        router: &mut Router,
+        routing_table: &RoutingTable,
+        rank: u8,
+        self_destination: u8,
+    ) {
+        for (i, (status, exception_source)) in self.session.subkernels_finished.iter().enumerate() {
+            if *status == id {
+                if exception_source.is_none() {
+                    self.control.tx.send(kernel::Message::SubkernelAwaitFinishReply);
+                    self.session.kernel_state = KernelState::Running;
+                    self.session.subkernels_finished.swap_remove(i);
+                } else {
+                    let destination = exception_source.unwrap();
+                    self.session.external_exception = Some(Vec::new());
+                    self.session.kernel_state = KernelState::SubkernelRetrievingException {
+                        destination: destination,
+                    };
+                    router.route(
+                        drtioaux::Packet::SubkernelExceptionRequest {
+                            source: self_destination,
+                            destination: destination,
+                        },
+                        &routing_table,
+                        rank,
+                        self_destination,
+                    );
+                }
+                break;
+            }
+        }
+    }
+
    pub fn subkernel_load_run_reply(&mut self, succeeded: bool) {
        if self.session.kernel_state == KernelState::SubkernelAwaitLoad {
            self.control
@ -608,16 +649,46 @@ impl<'a> Manager<'_> {
    }

    pub fn remote_subkernel_finished(&mut self, id: u32, with_exception: bool, exception_source: u8) {
-        if with_exception {
-            self.kernel_stop();
-            self.last_finished = Some(SubkernelFinished {
-                source: self.session.source,
-                id: self.session.id,
-                with_exception: true,
-                exception_source: exception_source,
-            })
+        let exception_src = if with_exception { Some(exception_source) } else { None };
+        self.session.subkernels_finished.push((id, exception_src));
+    }
+
+    pub fn received_exception(
+        &mut self,
+        exception_data: &[u8],
+        last: bool,
+        router: &mut Router,
+        routing_table: &RoutingTable,
+        rank: u8,
+        self_destination: u8,
+    ) {
+        if let KernelState::SubkernelRetrievingException { destination } = self.session.kernel_state {
+            self.session
+                .external_exception
+                .as_mut()
+                .unwrap()
+                .extend_from_slice(exception_data);
+            if last {
+                self.control
+                    .tx
+                    .send(kernel::Message::SubkernelError(kernel::SubkernelStatus::Exception(
+                        self.session.external_exception.take().unwrap(),
+                    )));
+                self.session.kernel_state = KernelState::Running;
+            } else {
+                /* fetch another slice */
+                router.route(
+                    drtioaux::Packet::SubkernelExceptionRequest {
+                        source: self_destination,
+                        destination: destination,
+                    },
+                    routing_table,
+                    rank,
+                    self_destination,
+                );
+            }
        } else {
-            self.session.subkernels_finished.push(id);
+            warn!("Received unsolicited exception data");
        }
    }

@ -742,6 +813,7 @@ impl<'a> Manager<'_> {
                id,
                destination: sk_destination,
                run,
+                timestamp,
            } => {
                self.session.kernel_state = KernelState::SubkernelAwaitLoad;
                router.route(
@ -750,6 +822,7 @@ impl<'a> Manager<'_> {
                        destination: sk_destination,
                        id: id,
                        run: run,
+                        timestamp,
                    },
                    routing_table,
                    rank,
@ -780,28 +853,35 @@ impl<'a> Manager<'_> {
        Ok(false)
    }

-    fn process_external_messages(&mut self, timer: &GlobalTimer) -> Result<(), Error> {
+    fn process_external_messages(
+        &mut self,
+        router: &mut Router,
+        routing_table: &RoutingTable,
+        rank: u8,
+        self_destination: u8,
+        timer: &GlobalTimer,
+    ) -> Result<(), Error> {
        match &self.session.kernel_state {
            KernelState::MsgAwait { max_time, id, tags } => {
                if let Some(max_time) = *max_time {
                    if timer.get_time() > max_time {
-                        self.control.tx.send(kernel::Message::SubkernelMsgRecvReply {
-                            status: kernel::SubkernelStatus::Timeout,
-                            count: 0,
-                        });
+                        self.control
+                            .tx
+                            .send(kernel::Message::SubkernelError(kernel::SubkernelStatus::Timeout));
                        self.session.kernel_state = KernelState::Running;
                        return Ok(());
                    }
                }
                if let Some(message) = self.session.messages.get_incoming(*id) {
-                    self.control.tx.send(kernel::Message::SubkernelMsgRecvReply {
-                        status: kernel::SubkernelStatus::NoError,
-                        count: message.count,
-                    });
+                    self.control
+                        .tx
+                        .send(kernel::Message::SubkernelMsgRecvReply { count: message.count });
                    let tags = tags.clone();
                    self.session.kernel_state = KernelState::Running;
                    self.pass_message_to_kernel(&message, tags, timer)
                } else {
+                    let id = *id;
+                    self.check_finished_kernels(id, router, routing_table, rank, self_destination);
                    Err(Error::AwaitingMessage)
                }
            }
@ -817,27 +897,18 @@ impl<'a> Manager<'_> {
            KernelState::SubkernelAwaitFinish { max_time, id } => {
                if let Some(max_time) = *max_time {
                    if timer.get_time() > max_time {
-                        self.control.tx.send(kernel::Message::SubkernelAwaitFinishReply {
-                            status: kernel::SubkernelStatus::Timeout,
-                        });
+                        self.control
+                            .tx
+                            .send(kernel::Message::SubkernelError(kernel::SubkernelStatus::Timeout));
                        self.session.kernel_state = KernelState::Running;
                        return Ok(());
                    }
                }
-                let mut i = 0;
-                for status in &self.session.subkernels_finished {
-                    if *status == *id {
-                        self.control.tx.send(kernel::Message::SubkernelAwaitFinishReply {
-                            status: kernel::SubkernelStatus::NoError,
-                        });
-                        self.session.kernel_state = KernelState::Running;
-                        self.session.subkernels_finished.swap_remove(i);
-                        break;
-                    }
-                    i += 1;
-                }
+                let id = *id;
+                self.check_finished_kernels(id, router, routing_table, rank, self_destination);
                Ok(())
            }
+            KernelState::SubkernelRetrievingException { .. } => Err(Error::AwaitingMessage),
            KernelState::DmaAwait { max_time } | KernelState::DmaPendingAwait { max_time, .. } => {
                if timer.get_time() > *max_time {
                    self.control.tx.send(kernel::Message::DmaAwaitRemoteReply {
Author	SHA1	Message	Date
Sébastien Bourdeauducq	e1f493f3ca	drtio: add InjectionRequest to expects_response	2024-11-26 14:58:24 +08:00
Sebastien Bourdeauducq	1f5ea41934	flake: update dependencies	2024-11-20 19:58:55 +08:00
Sebastien Bourdeauducq	7f83d56ef5	cargo fmt	2024-11-20 09:42:49 +08:00
Jonathan Coates	1d431456f4	Fix DWARF parser treating catch blocks as unconditional Signed-off-by: Jonathan Coates <jonathan.coates@oxionics.com>	2024-11-20 09:32:38 +08:00
Sebastien Bourdeauducq	b03e380c1e	flake: update dependencies	2024-11-20 09:07:00 +08:00
occheung	47fc53c4bf	drtio_tuple -> drtio_context	2024-11-18 13:13:10 +08:00
occheung	42eaecf9e1	remove debug message	2024-11-18 12:19:37 +08:00
occheung	beb7e6f994	cargo fmt	2024-11-18 12:19:37 +08:00
occheung	4502a47aa6	drtio_proto: add allocate step for flashing This avoids reallocation while transfering binaries.	2024-11-18 12:19:37 +08:00
occheung	ac6b7d5cf0	satman: fix checksum error message	2024-11-18 12:19:37 +08:00
occheung	3019bc6123	runtime: check crc when flashing	2024-11-18 12:19:37 +08:00
occheung	95b8562812	cargo fmt	2024-11-18 12:19:37 +08:00
occheung	a13f5d02fa	mgmt: supplementary tuple -> tuple struct	2024-11-18 12:19:37 +08:00
occheung	e52aa77068	cargo fmt	2024-11-18 12:19:37 +08:00
occheung	8e28d12ad0	runtime mgmt: avoid pull_log resource hog	2024-11-18 12:19:37 +08:00
occheung	47cddae04f	runtime mgmt: avoid passing incomplete log to core_log	2024-11-18 12:19:37 +08:00
occheung	27a65df40e	satman mgmt: fix uart log level change message	2024-11-18 12:19:37 +08:00
occheung	759cca3bfd	satman mgmt: allow sliceable to consume log source	2024-11-18 12:19:37 +08:00
occheung	aadb6fc22d	satman mgmt: get logger unconditionally	2024-11-18 12:19:37 +08:00
occheung	ae4d5a4228	mgmt: minor fix	2024-11-18 12:19:37 +08:00
occheung	6f1d727ca2	drtio-proto: avoid expecting response to drop link ack	2024-11-18 12:19:37 +08:00
occheung	7da5061f7e	coremgmt: fix import/uses	2024-11-18 12:19:37 +08:00
occheung	47d418c69e	coremgmt: remove unnecsaary cursors	2024-11-18 12:19:37 +08:00
occheung	d2979e8894	runtime coremgmt: implement firmware rewrite	2024-11-18 12:19:37 +08:00
occheung	3884c14a19	satman coremgmt: code after reboot is unreachable	2024-11-18 12:19:37 +08:00
occheung	c5b00d8e4e	cargo fmt	2024-11-18 12:19:37 +08:00
occheung	2985875f9a	satman: implement boot file rewrite sequence	2024-11-18 12:19:37 +08:00
occheung	5cb565a7e0	coremgr: current_payload -> config_payload	2024-11-18 12:19:37 +08:00
occheung	59954829a2	drtio-proto: (N)ACK -> Reply { succeeded }	2024-11-18 12:19:37 +08:00
occheung	960864c847	drtio-proto: add coremgmt-over-drtio messages	2024-11-18 12:19:37 +08:00
occheung	bdc29e5709	runtime: support coremgmt on satellites	2024-11-18 12:19:37 +08:00
occheung	332732dc44	satman: implement cfg/mgmt operations	2024-11-18 12:19:37 +08:00
occheung	244c7396d9	runtime: handle drtio-eem satellite disconnection	2024-11-18 12:08:44 +08:00
newell	2c633409b8	Set FCLK0 for EBAZ4205 EBAZ4205 uses FCLK0 as the RTIO clock. If the user modifies the gateware to use an external clock, FCLK0 is not used. Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-11-17 10:08:43 +08:00
Sebastien Bourdeauducq	9774b39fd8	flake: update zynq-rs	2024-11-16 17:32:05 +08:00
Sebastien Bourdeauducq	9054e4a7cb	flake: update zynq-rs, switch to oxalica rust overlay	2024-11-16 17:22:01 +08:00
newell	d79bf8d54a	gateware: Add default TTLs to EBAZ4205 (#335 ) Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-11-16 10:40:45 +08:00
Sebastien Bourdeauducq	75e7fc55a3	flake: update dependencies	2024-11-16 10:39:39 +08:00
architeuthidae	24a4d79f0f	README: general update	2024-11-07 19:07:38 +01:00
Sébastien Bourdeauducq	9ce3aadb15	cargo fmt	2024-10-18 17:43:39 +08:00
mwojcik	3390abd5a1	subkernels: pass now_mu when calling subkernels	2024-10-18 13:51:48 +08:00
newell	a410c40b50	ADD SPI to EBAZ4205 for AD9834 (#331 ) Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-10-17 15:06:11 +08:00
newell	030247be18	add pre-commit hooks for code formatting Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-10-08 15:19:07 +08:00
newell	61df939c87	ebaz4205: add variant and hydra job Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-10-08 11:35:31 +08:00
newell	aba97175c6	Fix formatting	2024-10-05 16:30:45 -07:00
newell	81790257a5	Add ebaz4205 support (#327 ) Co-authored-by: newell <newell.jensen@gmail.com> Co-committed-by: newell <newell.jensen@gmail.com>	2024-10-05 15:05:49 +08:00
Sebastien Bourdeauducq	1f81d038e0	update dependencies	2024-10-05 14:50:13 +08:00
Sebastien Bourdeauducq	1e42228aac	flake: remove deprecated pytest-runner	2024-09-30 16:19:56 +08:00
Sebastien Bourdeauducq	c84653b500	flake: update dependencies	2024-09-30 16:01:11 +08:00
Sebastien Bourdeauducq	6585b9b441	flake: update dependencies	2024-09-30 14:17:25 +08:00
Simon Renblad	873dd86b4d	runtime: cargo fmt (NFC)	2024-09-19 10:23:31 +08:00
Simon Renblad	e7614d2e8e	rerun idle kernel on finish	2024-09-13 09:35:38 +08:00
Simon Renblad	491e426222	run idle kernel on flash	2024-09-12 16:12:57 +08:00
Simon Renblad	ccd3bf3003	runtime: fix drtio inject lock	2024-09-02 17:19:20 +08:00
Sebastien Bourdeauducq	3fdb7e80a8	flake: update dependencies	2024-08-23 19:14:08 +08:00
abdul124	bd1de933fb	cargo fmt	2024-08-23 17:49:14 +08:00
abdul124	e8d77fca3e	firmware: add UnwrapNoneError exception	2024-08-23 16:50:47 +08:00
abdul124	85e8a3fc44	firmware: add LinAlgError exception	2024-08-22 10:42:28 +08:00
Sebastien Bourdeauducq	04078b3d89	flake: update dependencies	2024-08-21 18:51:19 +08:00
abdul124	d508c5c6f8	firmware: add unit tests for exception sync	2024-08-21 16:35:03 +08:00
abdul124	bae41253e4	firmware: sync exception names and ids	2024-08-21 16:34:25 +08:00
abdul124	20181e9915	fix nalgebra url	2024-08-07 13:49:03 +08:00
abdul124	a835149619	kernel/linalg: remove redundant unsafe blocks	2024-08-07 13:48:21 +08:00
Sebastien Bourdeauducq	78d6b7ddcf	cargo fmt	2024-08-05 19:37:55 +08:00
Simon Renblad	fad1db9796	comms: remove idle kernel DRTIO error case	2024-08-05 19:28:09 +08:00
Simon Renblad	fee30033ec	comms: run idle kernel on start-up	2024-08-05 19:28:09 +08:00
abdul124	fe6f259d48	kernel: add linalg functions	2024-08-01 18:20:32 +08:00
Sebastien Bourdeauducq	e4d7ce114f	flake: update fastnumbers	2024-08-01 07:41:32 +08:00
mwojcik	63f4783687	subkernels: support exceptions from subkernels	2024-07-31 17:22:29 +08:00
mwojcik	69a0b1bfb7	subkernels: raise exceptions to kernel	2024-07-31 17:22:29 +08:00
Sebastien Bourdeauducq	f6bff80105	flake: update dependencies	2024-07-31 17:20:54 +08:00
Sébastien Bourdeauducq	57fd327ecb	rustfmt	2024-07-22 18:55:17 +08:00
abdul124	69d5b11ebf	kernel/api: add nalgebra::linalg methods	2024-07-22 11:57:58 +08:00
abdul124	bab938c563	add nalgebra dependency Co-authored-by: abdul124 <ar@m-labs.hk> Co-committed-by: abdul124 <ar@m-labs.hk>	2024-07-22 11:13:45 +08:00
mwojcik	d51e5e60c3	repeater: handle async messages	2024-07-09 23:04:34 +08:00
mwojcik	23857eef63	allow toggling SED spread with flash config key	2024-07-09 18:11:20 +08:00
Sebastien Bourdeauducq	d0615bf965	flake: update dependencies	2024-07-09 10:37:37 +02:00
abdul124	3a789889cf	kernel/api: add rint api	2024-07-05 14:53:09 +08:00
mwojcik	72b814f7fd	repeater: clear buffer after ping	2024-07-04 17:30:04 +08:00
Sebastien Bourdeauducq	ead20a66a5	flake: update dependencies	2024-06-06 10:05:55 +08:00
morgan	586fd2f17e	Gateware: remove redundant si549.py & wrpll.py	2024-05-30 15:27:16 +08:00
morgan	377f8779a0	kasli soc: refactor to use wrpll from artiq	2024-05-30 15:25:33 +08:00
morgan	1fbaacfc43	flake: update artiq	2024-05-30 15:14:02 +08:00
Sebastien Bourdeauducq	127ea9ea4d	flake: update dependencies	2024-05-28 17:30:49 +08:00
Simon Renblad	174c301d7d	add llvmPackages_11	2024-05-24 15:29:29 +08:00
Sebastien Bourdeauducq	52defff000	flake: update dependencies	2024-05-24 15:29:19 +08:00
mwojcik	2b2ebb5354	aux: increase max payload size	2024-05-20 15:20:06 +08:00
Sebastien Bourdeauducq	4341d2d2a5	update to LLLVM 14	2024-05-09 10:05:33 +08:00
Sebastien Bourdeauducq	57b885ed99	flake: update dependencies	2024-05-09 10:03:57 +08:00
Sebastien Bourdeauducq	e922543855	flake: update dependencies	2024-05-08 18:56:15 +08:00
morgan	35ea0ed2ca	WRPLL: add filter for DRTIO 100MHz	2024-05-08 18:50:55 +08:00
morgan	cdf4ff24c0	WRPLL: replace PI controller with new filter	2024-05-08 18:50:55 +08:00
morgan	285b02c4b1	WRPLL: remove anti-windup	2024-05-08 18:50:55 +08:00
morgan	53cb592d19	kasli soc: add rtio_frequency cfg for runtime	2024-05-08 16:14:56 +08:00
				`@ -0,0 +1 @@`
				`doc-valid-idents = ["CPython", "NumPy", ".."]`