23 lines
964 B
Rust
23 lines
964 B
Rust
/// The ADC setup time is the number of seconds after the CSn line goes low before the serial clock
|
|
/// may begin. This is used for performing the internal ADC conversion.
|
|
pub const ADC_SETUP_TIME: f32 = 220e-9;
|
|
|
|
/// The maximum DAC/ADC serial clock line frequency. This is a hardware limit.
|
|
pub const ADC_DAC_SCK_MHZ_MAX: u32 = 50;
|
|
|
|
/// The optimal counting frequency of the hardware timers used for timestamping and sampling.
|
|
pub const TIMER_FREQUENCY_MHZ: u32 = 100;
|
|
|
|
/// The DDS reference clock frequency in MHz.
|
|
pub const DDS_REF_CLK_MHZ: u32 = 100;
|
|
|
|
/// The multiplier used for the DDS reference clock PLL.
|
|
pub const DDS_MULTIPLIER: u8 = 5;
|
|
|
|
/// The DDS system clock frequency after the internal PLL multiplication.
|
|
pub const DDS_SYSTEM_CLK_MHZ: u32 = DDS_REF_CLK_MHZ * DDS_MULTIPLIER as u32;
|
|
|
|
/// The rate of the DDS SYNC_CLK in MHz is always 1/4 that of the internal PLL clock.
|
|
#[allow(dead_code)]
|
|
pub const DDS_SYNC_CLK_MHZ: u32 = DDS_SYSTEM_CLK_MHZ / 4;
|