739 lines
28 KiB
Rust
739 lines
28 KiB
Rust
#![deny(warnings)]
|
|
#![allow(clippy::missing_safety_doc)]
|
|
#![no_std]
|
|
#![no_main]
|
|
#![cfg_attr(feature = "nightly", feature(asm))]
|
|
// Enable returning `!`
|
|
#![cfg_attr(feature = "nightly", feature(never_type))]
|
|
#![cfg_attr(feature = "nightly", feature(core_intrinsics))]
|
|
|
|
#[inline(never)]
|
|
#[panic_handler]
|
|
#[cfg(all(feature = "nightly", not(feature = "semihosting")))]
|
|
fn panic(_info: &core::panic::PanicInfo) -> ! {
|
|
let gpiod = unsafe { &*hal::stm32::GPIOD::ptr() };
|
|
gpiod.odr.modify(|_, w| w.odr6().high().odr12().high()); // FP_LED_1, FP_LED_3
|
|
unsafe {
|
|
core::intrinsics::abort();
|
|
}
|
|
}
|
|
|
|
#[cfg(feature = "semihosting")]
|
|
extern crate panic_semihosting;
|
|
|
|
#[cfg(not(any(feature = "nightly", feature = "semihosting")))]
|
|
extern crate panic_halt;
|
|
|
|
#[macro_use]
|
|
extern crate log;
|
|
|
|
// use core::sync::atomic::{AtomicU32, AtomicBool, Ordering};
|
|
use asm_delay;
|
|
use rtfm::cyccnt::{Instant, U32Ext};
|
|
use cortex_m_rt::exception;
|
|
use cortex_m;
|
|
use stm32h7xx_hal as hal;
|
|
use stm32h7xx_hal::{
|
|
prelude::*,
|
|
};
|
|
|
|
use embedded_hal::{
|
|
digital::v2::OutputPin,
|
|
};
|
|
|
|
use stm32h7_ethernet as ethernet;
|
|
use smoltcp as net;
|
|
|
|
use heapless::{
|
|
String,
|
|
consts::*,
|
|
};
|
|
|
|
#[link_section = ".sram3.eth"]
|
|
static mut DES_RING: ethernet::DesRing = ethernet::DesRing::new();
|
|
|
|
mod afe;
|
|
mod eeprom;
|
|
mod iir;
|
|
mod pounder;
|
|
mod server;
|
|
|
|
#[cfg(not(feature = "semihosting"))]
|
|
fn init_log() {}
|
|
|
|
#[cfg(feature = "semihosting")]
|
|
fn init_log() {
|
|
use cortex_m_log::log::{init as init_log, Logger};
|
|
use cortex_m_log::printer::semihosting::{hio::HStdout, InterruptOk};
|
|
use log::LevelFilter;
|
|
static mut LOGGER: Option<Logger<InterruptOk<HStdout>>> = None;
|
|
let logger = Logger {
|
|
inner: InterruptOk::<_>::stdout().unwrap(),
|
|
level: LevelFilter::Info,
|
|
};
|
|
let logger = unsafe { LOGGER.get_or_insert(logger) };
|
|
|
|
init_log(logger).unwrap();
|
|
}
|
|
|
|
// Pull in build information (from `built` crate)
|
|
mod build_info {
|
|
#![allow(dead_code)]
|
|
// include!(concat!(env!("OUT_DIR"), "/built.rs"));
|
|
}
|
|
|
|
pub struct NetStorage {
|
|
ip_addrs: [net::wire::IpCidr; 1],
|
|
neighbor_cache: [Option<(net::wire::IpAddress, net::iface::Neighbor)>; 8],
|
|
}
|
|
|
|
static mut NET_STORE: NetStorage = NetStorage {
|
|
// Placeholder for the real IP address, which is initialized at runtime.
|
|
ip_addrs: [net::wire::IpCidr::Ipv6(net::wire::Ipv6Cidr::SOLICITED_NODE_PREFIX)],
|
|
|
|
neighbor_cache: [None; 8],
|
|
};
|
|
|
|
const SCALE: f32 = ((1 << 15) - 1) as f32;
|
|
|
|
const SPI_START_CODE: u32 = 0x201;
|
|
|
|
// static ETHERNET_PENDING: AtomicBool = AtomicBool::new(true);
|
|
|
|
const TCP_RX_BUFFER_SIZE: usize = 8192;
|
|
const TCP_TX_BUFFER_SIZE: usize = 8192;
|
|
|
|
type AFE1 = afe::ProgrammableGainAmplifier<
|
|
hal::gpio::gpiof::PF2<hal::gpio::Output<hal::gpio::PushPull>>,
|
|
hal::gpio::gpiof::PF5<hal::gpio::Output<hal::gpio::PushPull>>>;
|
|
|
|
type AFE2 = afe::ProgrammableGainAmplifier<
|
|
hal::gpio::gpiod::PD14<hal::gpio::Output<hal::gpio::PushPull>>,
|
|
hal::gpio::gpiod::PD15<hal::gpio::Output<hal::gpio::PushPull>>>;
|
|
|
|
macro_rules! route_request {
|
|
($request:ident,
|
|
readable_attributes: [$($read_attribute:tt: $getter:tt),*],
|
|
modifiable_attributes: [$($write_attribute:tt: $TYPE:ty, $setter:tt),*]) => {
|
|
match $request.req {
|
|
server::AccessRequest::Read => {
|
|
match $request.attribute {
|
|
$(
|
|
$read_attribute => {
|
|
let value = match $getter() {
|
|
Ok(data) => data,
|
|
Err(_) => return server::Response::error($request.attribute,
|
|
"Failed to set attribute"),
|
|
};
|
|
|
|
let encoded_data: String<U256> = match serde_json_core::to_string(&value) {
|
|
Ok(data) => data,
|
|
Err(_) => return server::Response::error($request.attribute,
|
|
"Failed to encode attribute value"),
|
|
};
|
|
|
|
server::Response::success($request.attribute, &encoded_data)
|
|
},
|
|
)*
|
|
_ => server::Response::error($request.attribute, "Unknown attribute")
|
|
}
|
|
},
|
|
server::AccessRequest::Write => {
|
|
match $request.attribute {
|
|
$(
|
|
$write_attribute => {
|
|
let new_value = match serde_json_core::from_str::<$TYPE>(&$request.value) {
|
|
Ok(data) => data,
|
|
Err(_) => return server::Response::error($request.attribute,
|
|
"Failed to decode value"),
|
|
};
|
|
|
|
match $setter(new_value) {
|
|
Ok(_) => server::Response::success($request.attribute, &$request.value),
|
|
Err(_) => server::Response::error($request.attribute,
|
|
"Failed to set attribute"),
|
|
}
|
|
}
|
|
)*
|
|
_ => server::Response::error($request.attribute, "Unknown attribute")
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#[rtfm::app(device = stm32h7xx_hal::stm32, peripherals = true, monotonic = rtfm::cyccnt::CYCCNT)]
|
|
const APP: () = {
|
|
struct Resources {
|
|
adc1: hal::spi::Spi<hal::stm32::SPI2>,
|
|
dac1: hal::spi::Spi<hal::stm32::SPI4>,
|
|
afe1: AFE1,
|
|
|
|
adc2: hal::spi::Spi<hal::stm32::SPI3>,
|
|
dac2: hal::spi::Spi<hal::stm32::SPI5>,
|
|
afe2: AFE2,
|
|
|
|
eeprom_i2c: hal::i2c::I2c<hal::stm32::I2C2>,
|
|
|
|
timer: hal::timer::Timer<hal::stm32::TIM2>,
|
|
net_interface: net::iface::EthernetInterface<'static, 'static, 'static,
|
|
ethernet::EthernetDMA<'static>>,
|
|
eth_mac: ethernet::EthernetMAC,
|
|
mac_addr: net::wire::EthernetAddress,
|
|
|
|
pounder: pounder::PounderDevices<asm_delay::AsmDelay>,
|
|
|
|
#[init([[0.; 5]; 2])]
|
|
iir_state: [iir::IIRState; 2],
|
|
#[init([iir::IIR { ba: [1., 0., 0., 0., 0.], y_offset: 0., y_min: -SCALE - 1., y_max: SCALE }; 2])]
|
|
iir_ch: [iir::IIR; 2],
|
|
}
|
|
|
|
#[init]
|
|
fn init(c: init::Context) -> init::LateResources {
|
|
let dp = c.device;
|
|
let mut cp = cortex_m::Peripherals::take().unwrap();
|
|
|
|
let pwr = dp.PWR.constrain();
|
|
let vos = pwr.freeze();
|
|
|
|
let rcc = dp.RCC.constrain();
|
|
let mut clocks = rcc
|
|
//TODO: Re-enable HSE for Stabilizer platform.
|
|
// .use_hse(8.mhz())
|
|
.sysclk(400.mhz())
|
|
.hclk(200.mhz())
|
|
.per_ck(100.mhz())
|
|
.pll2_p_ck(100.mhz())
|
|
.pll2_q_ck(100.mhz())
|
|
.freeze(vos, &dp.SYSCFG);
|
|
|
|
init_log();
|
|
|
|
// Enable SRAM3 for the ethernet descriptor ring.
|
|
clocks.rb.ahb2enr.modify(|_, w| w.sram3en().set_bit());
|
|
|
|
clocks.rb.rsr.write(|w| w.rmvf().set_bit());
|
|
|
|
clocks.rb.d2ccip1r.modify(|_, w| w.spi123sel().pll2_p().spi45sel().pll2_q());
|
|
|
|
let mut delay = hal::delay::Delay::new(cp.SYST, clocks.clocks);
|
|
|
|
let gpioa = dp.GPIOA.split(&mut clocks);
|
|
let gpiob = dp.GPIOB.split(&mut clocks);
|
|
let gpioc = dp.GPIOC.split(&mut clocks);
|
|
let gpiod = dp.GPIOD.split(&mut clocks);
|
|
let gpioe = dp.GPIOE.split(&mut clocks);
|
|
let gpiof = dp.GPIOF.split(&mut clocks);
|
|
let gpiog = dp.GPIOG.split(&mut clocks);
|
|
|
|
let afe1 = {
|
|
let a0_pin = gpiof.pf2.into_push_pull_output();
|
|
let a1_pin = gpiof.pf5.into_push_pull_output();
|
|
afe::ProgrammableGainAmplifier::new(a0_pin, a1_pin)
|
|
};
|
|
|
|
let afe2 = {
|
|
let a0_pin = gpiod.pd14.into_push_pull_output();
|
|
let a1_pin = gpiod.pd15.into_push_pull_output();
|
|
afe::ProgrammableGainAmplifier::new(a0_pin, a1_pin)
|
|
};
|
|
|
|
// Configure the SPI interfaces to the ADCs and DACs.
|
|
let adc1_spi = {
|
|
let spi_miso = gpiob.pb14.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_sck = gpiob.pb10.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _spi_nss = gpiob.pb9.into_alternate_af5();
|
|
|
|
let config = hal::spi::Config::new(hal::spi::Mode{
|
|
polarity: hal::spi::Polarity::IdleHigh,
|
|
phase: hal::spi::Phase::CaptureOnSecondTransition,
|
|
})
|
|
.communication_mode(hal::spi::CommunicationMode::Receiver)
|
|
.manage_cs()
|
|
.transfer_size(1)
|
|
.frame_size(16)
|
|
.cs_delay(220e-9);
|
|
|
|
let mut spi = dp.SPI2.spi(
|
|
(spi_sck, spi_miso, hal::spi::NoMosi),
|
|
config,
|
|
50.mhz(),
|
|
&clocks);
|
|
|
|
spi.listen(hal::spi::Event::Eot);
|
|
|
|
spi
|
|
};
|
|
|
|
let adc2_spi = {
|
|
let spi_miso = gpiob.pb4.into_alternate_af6().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_sck = gpioc.pc10.into_alternate_af6().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _spi_nss = gpioa.pa15.into_alternate_af6();
|
|
|
|
|
|
let config = hal::spi::Config::new(hal::spi::Mode{
|
|
polarity: hal::spi::Polarity::IdleHigh,
|
|
phase: hal::spi::Phase::CaptureOnSecondTransition,
|
|
})
|
|
.communication_mode(hal::spi::CommunicationMode::Receiver)
|
|
.manage_cs()
|
|
.transfer_size(1)
|
|
.frame_size(16)
|
|
.cs_delay(220e-9);
|
|
|
|
let mut spi = dp.SPI3.spi(
|
|
(spi_sck, spi_miso, hal::spi::NoMosi),
|
|
config,
|
|
50.mhz(),
|
|
&clocks);
|
|
|
|
spi.listen(hal::spi::Event::Eot);
|
|
|
|
spi
|
|
};
|
|
|
|
let dac1_spi = {
|
|
let spi_miso = gpioe.pe5.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_sck = gpioe.pe2.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _spi_nss = gpioe.pe4.into_alternate_af5();
|
|
|
|
let config = hal::spi::Config::new(hal::spi::Mode{
|
|
polarity: hal::spi::Polarity::IdleHigh,
|
|
phase: hal::spi::Phase::CaptureOnSecondTransition,
|
|
})
|
|
.communication_mode(hal::spi::CommunicationMode::Transmitter)
|
|
.manage_cs()
|
|
.transfer_size(1)
|
|
.frame_size(16)
|
|
.swap_mosi_miso();
|
|
|
|
let spi = dp.SPI4.spi((spi_sck, spi_miso, hal::spi::NoMosi), config, 50.mhz(), &clocks);
|
|
spi
|
|
};
|
|
|
|
let dac2_spi = {
|
|
let spi_miso = gpiof.pf8.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_sck = gpiof.pf7.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _spi_nss = gpiof.pf6.into_alternate_af5();
|
|
|
|
let config = hal::spi::Config::new(hal::spi::Mode{
|
|
polarity: hal::spi::Polarity::IdleHigh,
|
|
phase: hal::spi::Phase::CaptureOnSecondTransition,
|
|
})
|
|
.communication_mode(hal::spi::CommunicationMode::Transmitter)
|
|
.manage_cs()
|
|
.transfer_size(1)
|
|
.frame_size(16)
|
|
.swap_mosi_miso();
|
|
|
|
let spi = dp.SPI5.spi((spi_sck, spi_miso, hal::spi::NoMosi), config, 50.mhz(), &clocks);
|
|
|
|
spi
|
|
};
|
|
|
|
let mut fp_led_0 = gpiod.pd5.into_push_pull_output();
|
|
let mut fp_led_1 = gpiod.pd6.into_push_pull_output();
|
|
let mut fp_led_2 = gpiog.pg4.into_push_pull_output();
|
|
let mut fp_led_3 = gpiod.pd12.into_push_pull_output();
|
|
|
|
fp_led_0.set_low().unwrap();
|
|
fp_led_1.set_low().unwrap();
|
|
fp_led_2.set_low().unwrap();
|
|
fp_led_3.set_low().unwrap();
|
|
|
|
|
|
let pounder_devices = {
|
|
let ad9959 = {
|
|
let qspi_interface = {
|
|
// Instantiate the QUADSPI pins and peripheral interface.
|
|
// TODO: Place these into a pins structure that is provided to the QSPI
|
|
// constructor.
|
|
let _qspi_clk = gpiob.pb2.into_alternate_af9();
|
|
let _qspi_ncs = gpioc.pc11.into_alternate_af9();
|
|
let _qspi_io0 = gpioe.pe7.into_alternate_af10();
|
|
let _qspi_io1 = gpioe.pe8.into_alternate_af10();
|
|
let _qspi_io2 = gpioe.pe9.into_alternate_af10();
|
|
let _qspi_io3 = gpioe.pe10.into_alternate_af10();
|
|
|
|
let qspi = hal::qspi::Qspi::new(dp.QUADSPI, &mut clocks, 10.mhz()).unwrap();
|
|
pounder::QspiInterface::new(qspi).unwrap()
|
|
};
|
|
|
|
let mut reset_pin = gpioa.pa0.into_push_pull_output();
|
|
let io_update = gpiog.pg7.into_push_pull_output();
|
|
|
|
|
|
let asm_delay = {
|
|
let frequency_hz = clocks.clocks.c_ck().0;
|
|
asm_delay::AsmDelay::new(asm_delay::bitrate::Hertz (frequency_hz))
|
|
};
|
|
|
|
ad9959::Ad9959::new(qspi_interface,
|
|
&mut reset_pin,
|
|
io_update,
|
|
asm_delay,
|
|
ad9959::Mode::FourBitSerial,
|
|
100_000_000f32,
|
|
5).unwrap()
|
|
};
|
|
|
|
let io_expander = {
|
|
let sda = gpiob.pb7.into_alternate_af4().set_open_drain();
|
|
let scl = gpiob.pb8.into_alternate_af4().set_open_drain();
|
|
let i2c1 = dp.I2C1.i2c((scl, sda), 100.khz(), &clocks);
|
|
mcp23017::MCP23017::default(i2c1).unwrap()
|
|
};
|
|
|
|
let spi = {
|
|
let spi_mosi = gpiod.pd7.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_miso = gpioa.pa6.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let spi_sck = gpiog.pg11.into_alternate_af5().set_speed(hal::gpio::Speed::VeryHigh);
|
|
|
|
let config = hal::spi::Config::new(hal::spi::Mode{
|
|
polarity: hal::spi::Polarity::IdleHigh,
|
|
phase: hal::spi::Phase::CaptureOnSecondTransition,
|
|
})
|
|
.frame_size(8);
|
|
|
|
// The maximum frequency of this SPI must be limited due to capacitance on the MISO
|
|
// line causing a long RC decay.
|
|
dp.SPI1.spi((spi_sck, spi_miso, spi_mosi), config, 5.mhz(), &clocks)
|
|
};
|
|
|
|
let adc1 = {
|
|
let mut adc = dp.ADC1.adc(&mut delay, &mut clocks);
|
|
adc.calibrate();
|
|
|
|
adc.enable()
|
|
};
|
|
|
|
let adc2 = {
|
|
let mut adc = dp.ADC2.adc(&mut delay, &mut clocks);
|
|
adc.calibrate();
|
|
|
|
adc.enable()
|
|
};
|
|
|
|
let adc1_in_p = gpiof.pf11.into_analog();
|
|
let adc2_in_p = gpiof.pf14.into_analog();
|
|
|
|
pounder::PounderDevices::new(io_expander,
|
|
ad9959,
|
|
spi,
|
|
adc1,
|
|
adc2,
|
|
adc1_in_p,
|
|
adc2_in_p).unwrap()
|
|
};
|
|
|
|
let mut eeprom_i2c = {
|
|
let sda = gpiof.pf0.into_alternate_af4().set_open_drain();
|
|
let scl = gpiof.pf1.into_alternate_af4().set_open_drain();
|
|
dp.I2C2.i2c((scl, sda), 100.khz(), &clocks)
|
|
};
|
|
|
|
// Configure ethernet pins.
|
|
{
|
|
// Reset the PHY before configuring pins.
|
|
let mut eth_phy_nrst = gpioe.pe3.into_push_pull_output();
|
|
eth_phy_nrst.set_low().unwrap();
|
|
delay.delay_us(200u8);
|
|
eth_phy_nrst.set_high().unwrap();
|
|
let _rmii_ref_clk = gpioa.pa1.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_mdio = gpioa.pa2.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_mdc = gpioc.pc1.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_crs_dv = gpioa.pa7.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_rxd0 = gpioc.pc4.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_rxd1 = gpioc.pc5.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_tx_en = gpiob.pb11.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_txd0 = gpiob.pb12.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
let _rmii_txd1 = gpiog.pg14.into_alternate_af11().set_speed(hal::gpio::Speed::VeryHigh);
|
|
}
|
|
|
|
let mac_addr = match eeprom::read_eui48(&mut eeprom_i2c) {
|
|
Err(_) => {
|
|
info!("Could not read EEPROM, using default MAC address");
|
|
net::wire::EthernetAddress([0x10, 0xE2, 0xD5, 0x00, 0x03, 0x00])
|
|
}
|
|
Ok(raw_mac) => net::wire::EthernetAddress(raw_mac),
|
|
};
|
|
|
|
let (network_interface, eth_mac) = {
|
|
// Configure the ethernet controller
|
|
let (eth_dma, eth_mac) = unsafe {
|
|
ethernet::ethernet_init(
|
|
dp.ETHERNET_MAC,
|
|
dp.ETHERNET_MTL,
|
|
dp.ETHERNET_DMA,
|
|
&mut DES_RING,
|
|
mac_addr.clone())
|
|
};
|
|
|
|
unsafe { ethernet::enable_interrupt() };
|
|
|
|
let store = unsafe { &mut NET_STORE };
|
|
|
|
store.ip_addrs[0] = net::wire::IpCidr::new(net::wire::IpAddress::v4(10, 0, 16, 99), 24);
|
|
|
|
let neighbor_cache = net::iface::NeighborCache::new(&mut store.neighbor_cache[..]);
|
|
|
|
let interface = net::iface::EthernetInterfaceBuilder::new(eth_dma)
|
|
.ethernet_addr(mac_addr)
|
|
.neighbor_cache(neighbor_cache)
|
|
.ip_addrs(&mut store.ip_addrs[..])
|
|
.finalize();
|
|
|
|
(interface, eth_mac)
|
|
};
|
|
|
|
cp.SCB.enable_icache();
|
|
|
|
// info!("Version {} {}", build_info::PKG_VERSION, build_info::GIT_VERSION.unwrap());
|
|
// info!("Built on {}", build_info::BUILT_TIME_UTC);
|
|
// info!("{} {}", build_info::RUSTC_VERSION, build_info::TARGET);
|
|
|
|
// Utilize the cycle counter for RTFM scheduling.
|
|
cp.DWT.enable_cycle_counter();
|
|
|
|
let mut dma = hal::dma::Dma::dma(dp.DMA1, dp.DMAMUX1, &clocks);
|
|
dma.configure_m2p_stream(hal::dma::Stream::One,
|
|
&SPI_START_CODE as *const _ as u32,
|
|
&adc1_spi.spi.cr1 as *const _ as u32,
|
|
hal::dma::DMAREQ_ID::TIM2_CH1);
|
|
|
|
dma.configure_m2p_stream(hal::dma::Stream::Two,
|
|
&SPI_START_CODE as *const _ as u32,
|
|
&adc2_spi.spi.cr1 as *const _ as u32,
|
|
hal::dma::DMAREQ_ID::TIM2_CH2);
|
|
|
|
// Configure timer 2 to trigger conversions for the ADC
|
|
let mut timer2 = dp.TIM2.timer(50.khz(), &mut clocks);
|
|
timer2.configure_channel(hal::timer::Channel::One, 0.25);
|
|
timer2.configure_channel(hal::timer::Channel::Two, 0.75);
|
|
|
|
timer2.listen(hal::timer::Event::ChannelOneDma);
|
|
timer2.listen(hal::timer::Event::ChannelTwoDma);
|
|
|
|
init::LateResources {
|
|
adc1: adc1_spi,
|
|
dac1: dac1_spi,
|
|
adc2: adc2_spi,
|
|
dac2: dac2_spi,
|
|
afe1: afe1,
|
|
afe2: afe2,
|
|
|
|
timer: timer2,
|
|
pounder: pounder_devices,
|
|
|
|
eeprom_i2c: eeprom_i2c,
|
|
net_interface: network_interface,
|
|
eth_mac: eth_mac,
|
|
mac_addr: mac_addr,
|
|
}
|
|
}
|
|
|
|
#[task(binds = SPI3, resources = [adc2, dac2, iir_state, iir_ch], priority = 2)]
|
|
fn spi3(c: spi3::Context) {
|
|
c.resources.adc2.spi.ifcr.write(|w| w.eotc().set_bit());
|
|
|
|
let output: u16 = {
|
|
let a: u16 = c.resources.adc2.read().unwrap();
|
|
let x0 = f32::from(a as i16);
|
|
let y0 = c.resources.iir_ch[1].update(&mut c.resources.iir_state[1], x0);
|
|
y0 as i16 as u16 ^ 0x8000
|
|
};
|
|
|
|
c.resources.dac2.spi.ifcr.write(|w| w.eotc().set_bit().txtfc().set_bit());
|
|
c.resources.dac2.send(output).unwrap();
|
|
}
|
|
|
|
#[task(binds = SPI2, resources = [adc1, dac1, iir_state, iir_ch], priority = 2)]
|
|
fn spi2(c: spi2::Context) {
|
|
c.resources.adc1.spi.ifcr.write(|w| w.eotc().set_bit());
|
|
|
|
let output: u16 = {
|
|
let a: u16 = c.resources.adc1.read().unwrap();
|
|
let x0 = f32::from(a as i16);
|
|
let y0 = c.resources.iir_ch[0].update(&mut c.resources.iir_state[0], x0);
|
|
y0 as i16 as u16 ^ 0x8000
|
|
};
|
|
|
|
c.resources.dac1.spi.ifcr.write(|w| w.eotc().set_bit().txtfc().set_bit());
|
|
c.resources.dac1.send(output).unwrap();
|
|
}
|
|
|
|
#[idle(resources=[net_interface, pounder, mac_addr, eth_mac, iir_state, iir_ch, afe1, afe2])]
|
|
fn idle(mut c: idle::Context) -> ! {
|
|
|
|
let mut socket_set_entries: [_; 8] = Default::default();
|
|
let mut sockets = net::socket::SocketSet::new(&mut socket_set_entries[..]);
|
|
|
|
let mut rx_storage = [0; TCP_RX_BUFFER_SIZE];
|
|
let mut tx_storage = [0; TCP_TX_BUFFER_SIZE];
|
|
let tcp_handle = {
|
|
let tcp_rx_buffer = net::socket::TcpSocketBuffer::new(&mut rx_storage[..]);
|
|
let tcp_tx_buffer = net::socket::TcpSocketBuffer::new(&mut tx_storage[..]);
|
|
let tcp_socket = net::socket::TcpSocket::new(tcp_rx_buffer, tcp_tx_buffer);
|
|
sockets.add(tcp_socket)
|
|
};
|
|
|
|
let mut server = server::Server::new();
|
|
|
|
let mut time = 0u32;
|
|
let mut next_ms = Instant::now();
|
|
|
|
// TODO: Replace with reference to CPU clock from CCDR.
|
|
next_ms += 400_000.cycles();
|
|
|
|
loop {
|
|
let tick = Instant::now() > next_ms;
|
|
|
|
if tick {
|
|
next_ms += 400_000.cycles();
|
|
time += 1;
|
|
}
|
|
|
|
{
|
|
let socket =
|
|
&mut *sockets.get::<net::socket::TcpSocket>(tcp_handle);
|
|
if socket.state() == net::socket::TcpState::CloseWait {
|
|
socket.close();
|
|
} else if !(socket.is_open() || socket.is_listening()) {
|
|
socket
|
|
.listen(1235)
|
|
.unwrap_or_else(|e| warn!("TCP listen error: {:?}", e));
|
|
} else {
|
|
server.poll(socket, |req| {
|
|
info!("Got request: {:?}", req);
|
|
route_request!(req,
|
|
readable_attributes: [
|
|
"stabilizer/iir/state": (|| {
|
|
let state = c.resources.iir_state.lock(|iir_state|
|
|
server::Status {
|
|
t: time,
|
|
x0: iir_state[0][0],
|
|
y0: iir_state[0][2],
|
|
x1: iir_state[1][0],
|
|
y1: iir_state[1][2],
|
|
});
|
|
|
|
Ok::<server::Status, ()>(state)
|
|
}),
|
|
"stabilizer/afe1/gain": (|| c.resources.afe1.get_gain()),
|
|
"stabilizer/afe2/gain": (|| c.resources.afe2.get_gain()),
|
|
"pounder/in0": (|| {
|
|
c.resources.pounder.get_input_channel_state(
|
|
pounder::Channel::In0)
|
|
}),
|
|
"pounder/in1": (|| {
|
|
c.resources.pounder.get_input_channel_state(
|
|
pounder::Channel::In1)
|
|
}),
|
|
"pounder/out0": (|| {
|
|
c.resources.pounder.get_output_channel_state(
|
|
pounder::Channel::Out0)
|
|
}),
|
|
"pounder/out1": (|| {
|
|
c.resources.pounder.get_output_channel_state(
|
|
pounder::Channel::Out1)
|
|
}),
|
|
"pounder/dds/clock": (|| {
|
|
c.resources.pounder.get_dds_clock_config()
|
|
})
|
|
],
|
|
|
|
modifiable_attributes: [
|
|
"stabilizer/iir1/state": server::IirRequest, (|req: server::IirRequest| {
|
|
c.resources.iir_ch.lock(|iir_ch| {
|
|
if req.channel > 1 {
|
|
return Err(());
|
|
}
|
|
|
|
iir_ch[req.channel as usize] = req.iir;
|
|
|
|
Ok::<server::IirRequest, ()>(req)
|
|
})
|
|
}),
|
|
"stabilizer/iir2/state": server::IirRequest, (|req: server::IirRequest| {
|
|
c.resources.iir_ch.lock(|iir_ch| {
|
|
if req.channel > 1 {
|
|
return Err(());
|
|
}
|
|
|
|
iir_ch[req.channel as usize] = req.iir;
|
|
|
|
Ok::<server::IirRequest, ()>(req)
|
|
})
|
|
}),
|
|
"pounder/in0": pounder::ChannelState, (|state| {
|
|
c.resources.pounder.set_channel_state(pounder::Channel::In0,
|
|
state)
|
|
}),
|
|
"pounder/in1": pounder::ChannelState, (|state| {
|
|
c.resources.pounder.set_channel_state(pounder::Channel::In1,
|
|
state)
|
|
}),
|
|
"pounder/out0": pounder::ChannelState, (|state| {
|
|
c.resources.pounder.set_channel_state(pounder::Channel::Out0,
|
|
state)
|
|
}),
|
|
"pounder/out1": pounder::ChannelState, (|state| {
|
|
c.resources.pounder.set_channel_state(pounder::Channel::Out1,
|
|
state)
|
|
}),
|
|
"pounder/dds/clock": pounder::DdsClockConfig, (|config| {
|
|
c.resources.pounder.configure_dds_clock(config)
|
|
}),
|
|
"stabilizer/afe1/gain": afe::Gain, (|gain| {
|
|
Ok::<(), ()>(c.resources.afe1.set_gain(gain))
|
|
}),
|
|
"stabilizer/afe2/gain": afe::Gain, (|gain| {
|
|
Ok::<(), ()>(c.resources.afe2.set_gain(gain))
|
|
})
|
|
]
|
|
)
|
|
});
|
|
}
|
|
}
|
|
|
|
let sleep = match c.resources.net_interface.poll(&mut sockets,
|
|
net::time::Instant::from_millis(time as i64)) {
|
|
Ok(changed) => changed == false,
|
|
Err(net::Error::Unrecognized) => true,
|
|
Err(e) => {
|
|
info!("iface poll error: {:?}", e);
|
|
true
|
|
}
|
|
};
|
|
|
|
if sleep {
|
|
cortex_m::asm::wfi();
|
|
}
|
|
}
|
|
}
|
|
|
|
#[task(binds = ETH, priority = 1)]
|
|
fn eth(_: eth::Context) {
|
|
unsafe { ethernet::interrupt_handler() }
|
|
}
|
|
|
|
extern "C" {
|
|
// hw interrupt handlers for RTFM to use for scheduling tasks
|
|
// one per priority
|
|
fn DCMI();
|
|
fn JPEG();
|
|
fn SDMMC();
|
|
}
|
|
};
|
|
|
|
#[exception]
|
|
fn HardFault(ef: &cortex_m_rt::ExceptionFrame) -> ! {
|
|
panic!("HardFault at {:#?}", ef);
|
|
}
|
|
|
|
#[exception]
|
|
fn DefaultHandler(irqn: i16) {
|
|
panic!("Unhandled exception (IRQn = {})", irqn);
|
|
}
|