1216 lines
42 KiB
Rust
1216 lines
42 KiB
Rust
use dsp::{
|
|
iir_int::{IIRState, IIR},
|
|
reciprocal_pll::TimestampHandler,
|
|
shift_round,
|
|
trig::{atan2, cossin},
|
|
Complex,
|
|
};
|
|
|
|
use std::f64::consts::PI;
|
|
use std::vec::Vec;
|
|
|
|
const ADC_MAX: f64 = 1.;
|
|
const ADC_MAX_COUNT: f64 = (1 << 15) as f64;
|
|
|
|
struct Lockin {
|
|
harmonic: u32,
|
|
phase_offset: u32,
|
|
iir: IIR,
|
|
iir_state: [IIRState; 2],
|
|
}
|
|
|
|
impl Lockin {
|
|
/// Construct a new `Lockin` instance.
|
|
///
|
|
/// # Args
|
|
/// * `harmonic` - Factor for harmonic demodulation. For example, a value of 1 would demodulate
|
|
/// with the reference frequency whereas a value of 2 would demodulate with the first harmonic
|
|
/// of the reference frequency.
|
|
/// * `phase_offset` - Phase offset of the scaled (see `harmonic`) demodulation signal relative
|
|
/// to the reference signal.
|
|
/// * `iir` - IIR coefficients (see `iir_int::IIR`) used for filtering the demodulated in-phase
|
|
/// and quadrature signals.
|
|
pub fn new(harmonic: u32, phase_offset: u32, iir: IIR) -> Self {
|
|
Lockin {
|
|
harmonic,
|
|
phase_offset,
|
|
iir,
|
|
iir_state: [[0; 5]; 2],
|
|
}
|
|
}
|
|
|
|
/// Compute the in-phase and quadrature signals. This is intended to mimic the lock-in
|
|
/// processing routine invoked in main.rs.
|
|
///
|
|
/// # Args
|
|
/// * `adc_samples` - ADC samples.
|
|
/// * `demodulation_initial_phase` - Phase value of the demodulation signal corresponding to the
|
|
/// first ADC sample.
|
|
/// * `demodulation_frequency` - Demodulation frequency.
|
|
pub fn update(
|
|
&mut self,
|
|
adc_samples: Vec<i16>,
|
|
demodulation_initial_phase: u32,
|
|
demodulation_frequency: u32,
|
|
) -> Complex<i32> {
|
|
let mut signal = Vec::<Complex<i32>>::new();
|
|
|
|
adc_samples.iter().enumerate().for_each(|(i, s)| {
|
|
let sample_phase = self
|
|
.harmonic
|
|
.wrapping_mul(
|
|
(demodulation_frequency.wrapping_mul(i as u32))
|
|
.wrapping_add(demodulation_initial_phase),
|
|
)
|
|
.wrapping_add(self.phase_offset);
|
|
let (cos, sin) = cossin(sample_phase as i32);
|
|
|
|
signal.push((
|
|
*s as i32 * shift_round(sin, 16),
|
|
*s as i32 * shift_round(cos, 16),
|
|
));
|
|
|
|
signal[i].0 = self.iir.update(&mut self.iir_state[0], signal[i].0);
|
|
signal[i].1 = self.iir.update(&mut self.iir_state[1], signal[i].1);
|
|
});
|
|
|
|
(signal[0].0, signal[0].1)
|
|
}
|
|
}
|
|
|
|
/// Single-frequency sinusoid.
|
|
#[derive(Copy, Clone)]
|
|
struct PureSine {
|
|
// Frequency (in Hz).
|
|
frequency: f64,
|
|
// Amplitude in dBFS (decibels relative to full-scale). A 16-bit ADC has a minimum dBFS for each
|
|
// sample of -90.
|
|
amplitude_dbfs: f64,
|
|
// Phase offset (in radians).
|
|
phase_offset: f64,
|
|
}
|
|
|
|
/// Convert a dBFS voltage ratio to a linear ratio.
|
|
///
|
|
/// # Args
|
|
/// * `dbfs` - dB ratio relative to full scale.
|
|
///
|
|
/// # Returns
|
|
/// Linear value.
|
|
fn linear(dbfs: f64) -> f64 {
|
|
let base = 10_f64;
|
|
ADC_MAX * base.powf(dbfs / 20.)
|
|
}
|
|
|
|
/// Convert a linear voltage ratio to a dBFS ratio.
|
|
///
|
|
/// # Args
|
|
/// * `linear` - Linear voltage ratio.
|
|
///
|
|
/// # Returns
|
|
/// dBFS value.
|
|
fn dbfs(linear: f64) -> f64 {
|
|
20. * (linear / ADC_MAX).log10()
|
|
}
|
|
|
|
/// Convert a real ADC input value in the range `-ADC_MAX` to `+ADC_MAX` to an equivalent 16-bit ADC
|
|
/// sampled value. This models the ideal ADC transfer function.
|
|
///
|
|
/// # Args
|
|
/// * `x` - Real ADC input value.
|
|
///
|
|
/// # Returns
|
|
/// Sampled ADC value.
|
|
fn real_to_adc_sample(x: f64) -> i16 {
|
|
let max: i32 = i16::MAX as i32;
|
|
let min: i32 = i16::MIN as i32;
|
|
|
|
let xi: i32 = (x / ADC_MAX * ADC_MAX_COUNT) as i32;
|
|
|
|
// It's difficult to characterize the correct output result when the inputs are clipped, so
|
|
// panic instead.
|
|
if xi > max {
|
|
panic!("Input clipped to maximum, result is unlikely to be correct.");
|
|
} else if xi < min {
|
|
panic!("Input clipped to minimum, result is unlikely to be correct.");
|
|
}
|
|
|
|
xi as i16
|
|
}
|
|
|
|
/// Generate a full batch of ADC samples starting at `timestamp_start`.
|
|
///
|
|
/// # Args
|
|
/// * `pure_signals` - Pure sinusoidal components of the ADC-sampled signal.
|
|
/// * `timestamp_start` - Starting time of ADC-sampled signal in terms of the internal clock count.
|
|
/// * `internal_frequency` - Internal clock frequency (in Hz).
|
|
/// * `adc_frequency` - ADC sampling frequency (in Hz).
|
|
/// * `sample_buffer_size` - The number of ADC samples in one processing batch.
|
|
///
|
|
/// # Returns
|
|
/// The sampled signal at the ADC input.
|
|
fn adc_sampled_signal(
|
|
pure_signals: &Vec<PureSine>,
|
|
timestamp_start: u64,
|
|
internal_frequency: f64,
|
|
adc_frequency: f64,
|
|
sample_buffer_size: u32,
|
|
) -> Vec<i16> {
|
|
// amplitude of each pure signal
|
|
let mut amplitude: Vec<f64> = Vec::<f64>::new();
|
|
// initial phase value for each pure signal
|
|
let mut initial_phase: Vec<f64> = Vec::<f64>::new();
|
|
// phase increment at each ADC sample for each pure signal
|
|
let mut phase_increment: Vec<f64> = Vec::<f64>::new();
|
|
let adc_period = internal_frequency / adc_frequency;
|
|
|
|
// For each pure sinusoid, compute the amplitude, phase corresponding to the first ADC sample,
|
|
// and phase increment for each subsequent ADC sample.
|
|
for pure_signal in pure_signals.iter() {
|
|
let signal_period = internal_frequency / pure_signal.frequency;
|
|
let phase_offset_count =
|
|
pure_signal.phase_offset / (2. * PI) * signal_period;
|
|
let initial_phase_count =
|
|
(phase_offset_count + timestamp_start as f64) % signal_period;
|
|
|
|
amplitude.push(linear(pure_signal.amplitude_dbfs));
|
|
initial_phase.push(2. * PI * initial_phase_count / signal_period);
|
|
phase_increment.push(2. * PI * adc_period / signal_period);
|
|
}
|
|
|
|
// Compute the input signal corresponding to each ADC sample by summing the contributions from
|
|
// each pure sinusoid.
|
|
let mut signal = Vec::<i16>::new();
|
|
|
|
for i in 0..sample_buffer_size {
|
|
signal.push(real_to_adc_sample(
|
|
amplitude
|
|
.iter()
|
|
.zip(initial_phase.iter())
|
|
.zip(phase_increment.iter())
|
|
.fold(0., |acc, ((a, phi), theta)| {
|
|
acc + a * (phi + theta * i as f64).sin()
|
|
}),
|
|
));
|
|
}
|
|
|
|
signal
|
|
}
|
|
|
|
/// Reference clock timestamp values in one ADC batch period starting at `timestamp_start`. The
|
|
/// number of timestamps in a batch can be 0 or 1, so this returns an Option containing a timestamp
|
|
/// only if one occurred during the batch.
|
|
///
|
|
/// # Args
|
|
/// * `reference_frequency` - External reference signal frequency (in Hz).
|
|
/// * `timestamp_start` - Start time in terms of the internal clock count. This is the start time of
|
|
/// the current processing sequence.
|
|
/// * `timestamp_stop` - Stop time in terms of the internal clock count.
|
|
/// * `internal_frequency` - Internal clock frequency (in Hz).
|
|
///
|
|
/// # Returns
|
|
/// An Option, containing a timestamp if one occurred during the current batch period.
|
|
fn adc_batch_timestamps(
|
|
reference_frequency: f64,
|
|
timestamp_start: u64,
|
|
timestamp_stop: u64,
|
|
internal_frequency: f64,
|
|
) -> Option<u32> {
|
|
let reference_period = internal_frequency / reference_frequency;
|
|
let start_count = timestamp_start as f64 % reference_period;
|
|
|
|
let timestamp = (reference_period - start_count) % reference_period;
|
|
|
|
if timestamp < (timestamp_stop - timestamp_start) as f64 {
|
|
return Some(
|
|
((timestamp_start + timestamp.round() as u64) % (1u64 << 32))
|
|
as u32,
|
|
);
|
|
}
|
|
|
|
None
|
|
}
|
|
|
|
/// Lowpass biquad filter using cutoff and sampling frequencies. Taken from:
|
|
/// https://webaudio.github.io/Audio-EQ-Cookbook/audio-eq-cookbook.html
|
|
///
|
|
/// # Args
|
|
/// * `corner_frequency` - Corner frequency, or 3dB cutoff frequency (in Hz).
|
|
/// * `sampling_frequency` - Sampling frequency (in Hz).
|
|
///
|
|
/// # Returns
|
|
/// 2nd-order IIR filter coefficients in the form [b0,b1,b2,a1,a2]. a0 is set to -1.
|
|
fn lowpass_iir_coefficients(
|
|
corner_frequency: f64,
|
|
sampling_frequency: f64,
|
|
) -> [i32; 5] {
|
|
let normalized_angular_frequency: f64 =
|
|
2. * PI * corner_frequency / sampling_frequency;
|
|
let quality_factor: f64 = 1. / 2f64.sqrt();
|
|
let alpha: f64 = normalized_angular_frequency.sin() / (2. * quality_factor);
|
|
// All b coefficients have been multiplied by a factor of 2 in comparison with the link above in
|
|
// order to set the passband gain to 2.
|
|
let mut b0: f64 = 1. - normalized_angular_frequency.cos();
|
|
let mut b1: f64 = 2. * (1. - normalized_angular_frequency.cos());
|
|
let mut b2: f64 = b0;
|
|
let a0: f64 = 1. + alpha;
|
|
let mut a1: f64 = -2. * normalized_angular_frequency.cos();
|
|
let mut a2: f64 = 1. - alpha;
|
|
b0 /= a0;
|
|
b1 /= a0;
|
|
b2 /= a0;
|
|
a1 /= -a0;
|
|
a2 /= -a0;
|
|
|
|
// iir uses Q2.30 fixed point
|
|
[
|
|
(b0 * (1 << 30) as f64).round() as i32,
|
|
(b1 * (1 << 30) as f64).round() as i32,
|
|
(b2 * (1 << 30) as f64).round() as i32,
|
|
(a1 * (1 << 30) as f64).round() as i32,
|
|
(a2 * (1 << 30) as f64).round() as i32,
|
|
]
|
|
}
|
|
|
|
/// Maximum acceptable error between a computed and actual value given fixed and relative
|
|
/// tolerances.
|
|
///
|
|
/// # Args
|
|
/// * `a` - First input.
|
|
/// * `b` - Second input. The relative tolerance is computed with respect to the maximum of the
|
|
/// absolute values of the first and second inputs.
|
|
/// * `rtol` - Relative tolerance.
|
|
/// * `atol` - Fixed tolerance.
|
|
///
|
|
/// # Returns
|
|
/// Maximum acceptable error.
|
|
fn max_error(a: f64, b: f64, rtol: f64, atol: f64) -> f64 {
|
|
rtol * a.abs().max(b.abs()) + atol
|
|
}
|
|
|
|
// TODO this is (mostly) copied from testing.rs.
|
|
pub fn isclose(a: f64, b: f64, rtol: f64, atol: f64) -> bool {
|
|
(a - b).abs() <= max_error(a, b, rtol, atol)
|
|
}
|
|
|
|
/// Total noise amplitude of the input signal after sampling by the ADC. This computes an upper
|
|
/// bound of the total noise amplitude, rather than its actual value.
|
|
///
|
|
/// # Args
|
|
/// * `noise_inputs` - Noise sources at the ADC input.
|
|
/// * `demodulation_frequency` - Frequency of the demodulation signal (in Hz).
|
|
/// * `corner_frequency` - Low-pass filter 3dB corner (cutoff) frequency.
|
|
///
|
|
/// # Returns
|
|
/// Upper bound of the total amplitude of all noise sources.
|
|
fn sampled_noise_amplitude(
|
|
noise_inputs: &Vec<PureSine>,
|
|
demodulation_frequency: f64,
|
|
corner_frequency: f64,
|
|
) -> f64 {
|
|
// There is not a simple way to compute the amplitude of a superpostition of sinusoids with
|
|
// different frequencies and phases. Although we can compute the amplitude in special cases
|
|
// (e.g., two signals whose periods have a common multiple), these do not help us in the general
|
|
// case. However, we can say that the total amplitude will not be greater than the sum of the
|
|
// amplitudes of the individual noise sources. We treat this as an upper bound, and use it as an
|
|
// approximation of the actual amplitude.
|
|
|
|
let mut noise: f64 = noise_inputs
|
|
.iter()
|
|
.map(|n| {
|
|
// Noise inputs create an oscillation at the output, where the oscillation magnitude is
|
|
// determined by the strength of the noise and its attenuation (attenuation is
|
|
// determined by its proximity to the demodulation frequency and filter rolloff).
|
|
let octaves = ((n.frequency - demodulation_frequency).abs()
|
|
/ corner_frequency)
|
|
.log2();
|
|
// 2nd-order filter. Approximately 12dB/octave rolloff.
|
|
let attenuation = -2. * 20. * 2_f64.log10() * octaves;
|
|
linear(n.amplitude_dbfs + attenuation)
|
|
})
|
|
.sum();
|
|
|
|
// Add in 1/2 LSB for the maximum amplitude deviation resulting from quantization.
|
|
noise += 1. / ADC_MAX_COUNT / 2.;
|
|
|
|
noise
|
|
}
|
|
|
|
/// Compute the maximum effect of input noise on the lock-in magnitude computation.
|
|
///
|
|
/// The maximum effect of noise on the magnitude computation is given by:
|
|
///
|
|
/// | sqrt((I+n*sin(x))**2 + (Q+n*cos(x))**2) - sqrt(I**2 + Q**2) |
|
|
///
|
|
/// * I is the in-phase component of the portion of the input signal with the same frequency as the
|
|
/// demodulation signal.
|
|
/// * Q is the quadrature component.
|
|
/// * n is the total noise amplitude (from all contributions, after attenuation from filtering).
|
|
/// * x is the phase of the demodulation signal.
|
|
///
|
|
/// We need to find the demodulation phase (x) that maximizes this expression. We can ignore the
|
|
/// absolute value operation by also considering the expression minimum. The locations of the
|
|
/// minimum and maximum can be computed analytically by finding the value of x when the derivative
|
|
/// of this expression with respect to x is 0. When we solve this equation, we find:
|
|
///
|
|
/// x = atan(I/Q)
|
|
///
|
|
/// It's worth noting that this solution is technically only valid when cos(x)!=0 (i.e.,
|
|
/// x!=pi/2,-pi/2). However, this is not a problem because we only get these values when Q=0. Rust
|
|
/// correctly computes atan(inf)=pi/2, which is precisely what we want because x=pi/2 maximizes
|
|
/// sin(x) and therefore also the noise effect.
|
|
///
|
|
/// The other maximum or minimum is pi radians away from this value.
|
|
///
|
|
/// # Args
|
|
/// * `total_noise_amplitude` - Combined amplitude of all noise sources sampled by the ADC.
|
|
/// * `in_phase_actual` - Value of the in-phase component if no noise were present at the ADC input.
|
|
/// * `quadrature_actual` - Value of the quadrature component if no noise were present at the ADC
|
|
/// input.
|
|
/// * `desired_input_amplitude` - Amplitude of the desired input signal. That is, the input signal
|
|
/// component with the same frequency as the demodulation signal.
|
|
///
|
|
/// # Returns
|
|
/// Approximation of the maximum effect on the magnitude computation due to noise sources at the ADC
|
|
/// input.
|
|
fn magnitude_noise(
|
|
total_noise_amplitude: f64,
|
|
in_phase_actual: f64,
|
|
quadrature_actual: f64,
|
|
desired_input_amplitude: f64,
|
|
) -> f64 {
|
|
// See function documentation for explanation.
|
|
let noise = |in_phase_delta: f64, quadrature_delta: f64| -> f64 {
|
|
(((in_phase_actual + in_phase_delta).powf(2.)
|
|
+ (quadrature_actual + quadrature_delta).powf(2.))
|
|
.sqrt()
|
|
- desired_input_amplitude)
|
|
.abs()
|
|
};
|
|
|
|
let phase = (in_phase_actual / quadrature_actual).atan();
|
|
let max_noise_1 = noise(
|
|
total_noise_amplitude * phase.sin(),
|
|
total_noise_amplitude * phase.cos(),
|
|
);
|
|
let max_noise_2 = noise(
|
|
total_noise_amplitude * (phase + PI).sin(),
|
|
total_noise_amplitude * (phase + PI).cos(),
|
|
);
|
|
|
|
max_noise_1.max(max_noise_2)
|
|
}
|
|
|
|
/// Compute the maximum phase deviation from the correct value due to the input noise sources.
|
|
///
|
|
/// The maximum effect of noise on the phase computation is given by:
|
|
///
|
|
/// | atan2(Q+n*cos(x), I+n*sin(x)) - atan2(Q, I) |
|
|
///
|
|
/// See `magnitude_noise` for an explanation of the terms in this mathematical expression.
|
|
///
|
|
/// This expression is harder to compute analytically than the expression in `magnitude_noise`. We
|
|
/// could compute it numerically, but that's expensive. However, we can use heuristics to try to
|
|
/// guess the values of x that will maximize the noise effect. Intuitively, the difference will be
|
|
/// largest when the Y-argument of the atan2 function (Q+n*cos(x)) is pushed in the opposite
|
|
/// direction of the noise effect on the X-argument (i.e., cos(x) and sin(x) have different
|
|
/// signs). We can use:
|
|
///
|
|
/// * sin(x)=+-1 (+- denotes plus or minus), cos(x)=0,
|
|
/// * sin(x)=0, cos(x)=+-1, and
|
|
/// * the value of x that maximizes |sin(x)-cos(x)| (when sin(x)=1/sqrt(2) and cos(x)=-1/sqrt(2), or
|
|
/// when the signs are flipped)
|
|
///
|
|
/// The first choice addresses cases in which |I|>>|Q|, the second choice addresses cases in which
|
|
/// |Q|>>|I|, and the third choice addresses cases in which |I|~|Q|. We can test all of these cases
|
|
/// as an approximation for the real maximum.
|
|
///
|
|
/// # Args
|
|
/// * `total_noise_amplitude` - Total amplitude of all input noise sources.
|
|
/// * `in_phase_actual` - Value of the in-phase component if no noise were present at the input.
|
|
/// * `quadrature_actual` - Value of the quadrature component if no noise were present at the input.
|
|
///
|
|
/// # Returns
|
|
/// Approximation of the maximum effect on the phase computation due to noise sources at the ADC
|
|
/// input.
|
|
fn phase_noise(
|
|
total_noise_amplitude: f64,
|
|
in_phase_actual: f64,
|
|
quadrature_actual: f64,
|
|
) -> f64 {
|
|
// See function documentation for explanation.
|
|
let noise = |in_phase_delta: f64, quadrature_delta: f64| -> f64 {
|
|
((quadrature_actual + quadrature_delta)
|
|
.atan2(in_phase_actual + in_phase_delta)
|
|
- quadrature_actual.atan2(in_phase_actual))
|
|
.abs()
|
|
};
|
|
|
|
let mut max_noise: f64 = 0.;
|
|
for (in_phase_delta, quadrature_delta) in [
|
|
(
|
|
total_noise_amplitude / 2_f64.sqrt(),
|
|
total_noise_amplitude / -2_f64.sqrt(),
|
|
),
|
|
(
|
|
total_noise_amplitude / -2_f64.sqrt(),
|
|
total_noise_amplitude / 2_f64.sqrt(),
|
|
),
|
|
(total_noise_amplitude, 0.),
|
|
(-total_noise_amplitude, 0.),
|
|
(0., total_noise_amplitude),
|
|
(0., -total_noise_amplitude),
|
|
]
|
|
.iter()
|
|
{
|
|
max_noise = max_noise.max(noise(*in_phase_delta, *quadrature_delta));
|
|
}
|
|
|
|
max_noise
|
|
}
|
|
|
|
/// Lowpass filter test for in-phase/quadrature and magnitude/phase computations.
|
|
///
|
|
/// This attempts to "intelligently" model acceptable tolerance ranges for the measured in-phase,
|
|
/// quadrature, magnitude and phase results of lock-in processing for a typical low-pass filter
|
|
/// application. So, instead of testing whether the lock-in processing extracts the true magnitude
|
|
/// and phase (or in-phase and quadrature components) of the input signal, it attempts to calculate
|
|
/// what the lock-in processing should compute given any set of input noise sources. For example, if
|
|
/// a noise source of sufficient strength differs in frequency by 1kHz from the reference frequency
|
|
/// and the filter cutoff frequency is also 1kHz, testing if the lock-in amplifier extracts the
|
|
/// amplitude and phase of the input signal whose frequency is equal to the demodulation frequency
|
|
/// is doomed to failure. Instead, this function tests whether the lock-in correctly adheres to its
|
|
/// actual transfer function, whether or not it was given reasonable inputs. The logic for computing
|
|
/// acceptable tolerance ranges is performed in `sampled_noise_amplitude`, `magnitude_noise`, and
|
|
/// `phase_noise`.
|
|
///
|
|
/// # Args
|
|
/// * `internal_frequency` - Internal clock frequency (Hz). The internal clock increments timestamp
|
|
/// counter values used to record the edges of the external reference.
|
|
/// * `adc_frequency` - ADC sampling frequency (in Hz).
|
|
/// * `reference_frequency` - External reference frequency (in Hz).
|
|
/// * `demodulation_phase_offset` - Phase offset applied to the in-phase and quadrature demodulation
|
|
/// signals.
|
|
/// * `harmonic` - Scaling factor for the demodulation frequency. E.g., 2 would demodulate with the
|
|
/// first harmonic of the reference frequency.
|
|
/// * `sample_buffer_size_log2` - The base-2 logarithm of the number of samples in a processing
|
|
/// batch.
|
|
/// * `pll_shift_frequency` - See `pll::update()`.
|
|
/// * `pll_shift_phase` - See `pll::update()`.
|
|
/// * `corner_frequency` - Lowpass filter 3dB cutoff frequency.
|
|
/// * `desired_input` - `PureSine` giving the frequency, amplitude and phase of the desired result.
|
|
/// * `noise_inputs` - Vector of `PureSine` for any noise inputs on top of `desired_input`.
|
|
/// * `time_constant_factor` - Number of time constants after which the output is considered valid.
|
|
/// * `tolerance` - Acceptable relative tolerance for the magnitude and angle outputs. This is added
|
|
/// to fixed tolerance values computed inside this function. The outputs must remain within this
|
|
/// tolerance between `time_constant_factor` and `time_constant_factor+1` time constants.
|
|
fn lowpass_test(
|
|
internal_frequency: f64,
|
|
adc_frequency: f64,
|
|
reference_frequency: f64,
|
|
demodulation_phase_offset: f64,
|
|
harmonic: u32,
|
|
sample_buffer_size_log2: usize,
|
|
pll_shift_frequency: u8,
|
|
pll_shift_phase: u8,
|
|
corner_frequency: f64,
|
|
desired_input: PureSine,
|
|
noise_inputs: &mut Vec<PureSine>,
|
|
time_constant_factor: f64,
|
|
tolerance: f64,
|
|
) {
|
|
assert!(
|
|
isclose((internal_frequency / adc_frequency).log2(), (internal_frequency / adc_frequency).log2().round(), 0., 1e-5),
|
|
"The number of internal clock cycles in one ADC sampling period must be a power-of-two."
|
|
);
|
|
|
|
assert!(
|
|
internal_frequency / reference_frequency
|
|
>= internal_frequency / adc_frequency
|
|
* (1 << sample_buffer_size_log2) as f64,
|
|
"Too many timestamps per batch. Each batch can have at most 1 timestamp."
|
|
);
|
|
|
|
let adc_sample_ticks_log2 =
|
|
(internal_frequency / adc_frequency).log2().round() as usize;
|
|
assert!(
|
|
adc_sample_ticks_log2 + sample_buffer_size_log2 <= 32,
|
|
"The base-2 log of the number of ADC ticks in a sampling period plus the base-2 log of the sample buffer size must be less than 32."
|
|
);
|
|
|
|
let mut lockin = Lockin::new(
|
|
harmonic,
|
|
(demodulation_phase_offset / (2. * PI) * (1_u64 << 32) as f64).round()
|
|
as u32,
|
|
IIR {
|
|
ba: lowpass_iir_coefficients(corner_frequency, adc_frequency),
|
|
},
|
|
);
|
|
let mut timestamp_handler = TimestampHandler::new(
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
adc_sample_ticks_log2,
|
|
sample_buffer_size_log2,
|
|
);
|
|
|
|
let mut timestamp_start: u64 = 0;
|
|
let time_constant: f64 = 1. / (2. * PI * corner_frequency);
|
|
// Account for the pll settling time (see its documentation).
|
|
let pll_time_constant_samples =
|
|
(1 << pll_shift_phase.max(pll_shift_frequency)) as usize;
|
|
let low_pass_time_constant_samples =
|
|
(time_constant_factor * time_constant * adc_frequency
|
|
/ (1 << sample_buffer_size_log2) as f64) as usize;
|
|
let samples = pll_time_constant_samples + low_pass_time_constant_samples;
|
|
// Ensure the result remains within tolerance for 1 time constant after `time_constant_factor`
|
|
// time constants.
|
|
let extra_samples = (time_constant * adc_frequency) as usize;
|
|
let batch_sample_count =
|
|
1_u64 << (adc_sample_ticks_log2 + sample_buffer_size_log2);
|
|
|
|
let effective_phase_offset =
|
|
desired_input.phase_offset - demodulation_phase_offset;
|
|
let in_phase_actual =
|
|
linear(desired_input.amplitude_dbfs) * effective_phase_offset.cos();
|
|
let quadrature_actual =
|
|
linear(desired_input.amplitude_dbfs) * effective_phase_offset.sin();
|
|
|
|
let total_noise_amplitude = sampled_noise_amplitude(
|
|
noise_inputs,
|
|
reference_frequency * harmonic as f64,
|
|
corner_frequency,
|
|
);
|
|
// Add some fixed error to account for errors introduced by the PLL, our custom trig functions
|
|
// and integer division. It's a bit difficult to be precise about this. I've added a 1%
|
|
// (relative to full scale) error.
|
|
let total_magnitude_noise = magnitude_noise(
|
|
total_noise_amplitude,
|
|
in_phase_actual,
|
|
quadrature_actual,
|
|
linear(desired_input.amplitude_dbfs),
|
|
) + 1e-2;
|
|
let total_phase_noise =
|
|
phase_noise(total_noise_amplitude, in_phase_actual, quadrature_actual)
|
|
+ 1e-2 * 2. * PI;
|
|
|
|
let pure_signals = noise_inputs;
|
|
pure_signals.push(desired_input);
|
|
|
|
for n in 0..(samples + extra_samples) {
|
|
let adc_signal = adc_sampled_signal(
|
|
&pure_signals,
|
|
timestamp_start,
|
|
internal_frequency,
|
|
adc_frequency,
|
|
1 << sample_buffer_size_log2,
|
|
);
|
|
let timestamp = adc_batch_timestamps(
|
|
reference_frequency,
|
|
timestamp_start,
|
|
timestamp_start + batch_sample_count - 1,
|
|
internal_frequency,
|
|
);
|
|
|
|
let (demodulation_initial_phase, demodulation_frequency) =
|
|
timestamp_handler.update(timestamp);
|
|
|
|
let (in_phase, quadrature) = lockin.update(
|
|
adc_signal,
|
|
demodulation_initial_phase,
|
|
demodulation_frequency,
|
|
);
|
|
|
|
let magnitude = shift_round(in_phase, 16) * shift_round(in_phase, 16)
|
|
+ shift_round(quadrature, 16) * shift_round(quadrature, 16);
|
|
let phase = atan2(quadrature, in_phase);
|
|
|
|
// Ensure stable within tolerance for 1 time constant after `time_constant_factor`.
|
|
if n >= samples {
|
|
// We want our full-scale magnitude to be 1. Our fixed-point numbers treated as integers
|
|
// set the full-scale magnitude to 1<<60. So, we must divide by this number. However,
|
|
// we've already divided by 1<<32 in the magnitude computation to keep our values within
|
|
// the i32 limits, so we just need to divide by an additional 1<<28.
|
|
let amplitude_normalized =
|
|
(magnitude as f64 / (1_u64 << 28) as f64).sqrt();
|
|
assert!(
|
|
isclose(linear(desired_input.amplitude_dbfs), amplitude_normalized, tolerance, total_magnitude_noise),
|
|
"magnitude actual: {:.4} ({:.2} dBFS), magnitude computed: {:.4} ({:.2} dBFS), tolerance: {:.4}",
|
|
linear(desired_input.amplitude_dbfs),
|
|
desired_input.amplitude_dbfs,
|
|
amplitude_normalized,
|
|
dbfs(amplitude_normalized),
|
|
max_error(linear(desired_input.amplitude_dbfs), amplitude_normalized, tolerance, total_magnitude_noise),
|
|
);
|
|
let phase_normalized =
|
|
phase as f64 / (1_u64 << 32) as f64 * (2. * PI);
|
|
assert!(
|
|
isclose(
|
|
effective_phase_offset,
|
|
phase_normalized,
|
|
tolerance,
|
|
total_phase_noise
|
|
),
|
|
"phase actual: {:.4}, phase computed: {:.4}, tolerance: {:.4}",
|
|
effective_phase_offset,
|
|
phase_normalized,
|
|
max_error(
|
|
effective_phase_offset,
|
|
phase_normalized,
|
|
tolerance,
|
|
total_phase_noise
|
|
),
|
|
);
|
|
|
|
let in_phase_normalized = in_phase as f64 / (1 << 30) as f64;
|
|
let quadrature_normalized = quadrature as f64 / (1 << 30) as f64;
|
|
|
|
assert!(
|
|
isclose(
|
|
in_phase_actual,
|
|
in_phase_normalized,
|
|
total_noise_amplitude,
|
|
tolerance
|
|
),
|
|
"in-phase actual: {:.4}, in-phase computed: {:.3}, tolerance: {:.4}",
|
|
in_phase_actual,
|
|
in_phase_normalized,
|
|
max_error(
|
|
in_phase_actual,
|
|
in_phase_normalized,
|
|
total_noise_amplitude,
|
|
tolerance
|
|
),
|
|
);
|
|
assert!(
|
|
isclose(
|
|
quadrature_actual,
|
|
quadrature_normalized,
|
|
total_noise_amplitude,
|
|
tolerance
|
|
),
|
|
"quadrature actual: {:.4}, quadrature computed: {:.4}, tolerance: {:.4}",
|
|
quadrature_actual,
|
|
quadrature_normalized,
|
|
max_error(
|
|
quadrature_actual,
|
|
quadrature_normalized,
|
|
total_noise_amplitude,
|
|
tolerance
|
|
),
|
|
);
|
|
}
|
|
|
|
timestamp_start += batch_sample_count;
|
|
}
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 100e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 3;
|
|
let pll_shift_phase: u8 = 2;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 6.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.1 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.9 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_demodulation_phase_offset_pi_2() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 100e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 3;
|
|
let pll_shift_phase: u8 = 2;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = PI / 2.;
|
|
let time_constant_factor: f64 = 6.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.1 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.9 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_phase_offset_pi_2() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 100e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 3;
|
|
let pll_shift_phase: u8 = 2;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 6.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: PI / 2.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.1 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.9 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_fundamental_111e3_phase_offset_pi_4() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 111e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 3;
|
|
let pll_shift_phase: u8 = 2;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: PI / 4.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.1 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.9 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_first_harmonic() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 50e3;
|
|
let harmonic: u32 = 2;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_second_harmonic() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 50e3;
|
|
let harmonic: u32 = 3;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_third_harmonic() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 50e3;
|
|
let harmonic: u32 = 4;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_first_harmonic_phase_shift() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 50e3;
|
|
let harmonic: u32 = 2;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: PI / 4.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_adc_frequency_1e6() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 32.;
|
|
let signal_frequency: f64 = 100e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_internal_frequency_125e6() {
|
|
let internal_frequency: f64 = 125e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 100e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-2;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![
|
|
PureSine {
|
|
frequency: 1.2 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
PureSine {
|
|
frequency: 0.8 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
},
|
|
],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|
|
|
|
#[test]
|
|
fn lowpass_low_signal_frequency() {
|
|
let internal_frequency: f64 = 100e6;
|
|
let adc_frequency: f64 = internal_frequency / 64.;
|
|
let signal_frequency: f64 = 10e3;
|
|
let harmonic: u32 = 1;
|
|
let sample_buffer_size_log2: usize = 2;
|
|
let pll_shift_frequency: u8 = 2;
|
|
let pll_shift_phase: u8 = 1;
|
|
let corner_frequency: f64 = 1e3;
|
|
let demodulation_frequency: f64 = harmonic as f64 * signal_frequency;
|
|
let demodulation_phase_offset: f64 = 0.;
|
|
let time_constant_factor: f64 = 5.;
|
|
let tolerance: f64 = 1e-1;
|
|
|
|
lowpass_test(
|
|
internal_frequency,
|
|
adc_frequency,
|
|
signal_frequency,
|
|
demodulation_phase_offset,
|
|
harmonic,
|
|
sample_buffer_size_log2,
|
|
pll_shift_frequency,
|
|
pll_shift_phase,
|
|
corner_frequency,
|
|
PureSine {
|
|
frequency: demodulation_frequency,
|
|
amplitude_dbfs: -30.,
|
|
phase_offset: 0.,
|
|
},
|
|
&mut vec![PureSine {
|
|
frequency: 1.1 * demodulation_frequency,
|
|
amplitude_dbfs: -20.,
|
|
phase_offset: 0.,
|
|
}],
|
|
time_constant_factor,
|
|
tolerance,
|
|
);
|
|
}
|